Compare

Compare Equipment Go Back

Operating Specifications
	TL642 Telehandler View Product	TL1255 Telehandler View Product Remove	TL1055 Telehandler View Product Remove
Rated Load Capacity	6500 lb	12000 lb	10000 lb
Maximum Lift Height	42 ft	54.9 ft	54.9 ft
Maximum Forward Reach	30 ft	42 ft	42 ft
Top Travel Speed	19 mile/h	21 mile/h	21 mile/h
Drawbar Pull - Loaded	20670 lbf	26510 lb	26510 lbf
Turning Radius - Over Tires	12 ft	14.1 ft	14.1 ft
Frame Leveling	10°	10°	10°
Capacity at Maximum Height	6500 lb	-	-
Capacity at Maximum Reach	700 lb	-	-
Maximum Lift Height (o/r Down)	-	54.9 ft	54.9 ft
Capacity at Maximum Height (o/r Down)	-	5000 lb	5000 lb
Capacity at Maximum Reach (o/r Down)	-	3500 lb	2500 lb
Operating Weight	-	34182 lb	31700 lb
Maximum Rated Load Capacity	-	12000 lb	10000 lb
Engine
Engine Model	Cat® C3.6L	Cat® C3.6L*	Cat® C3.6L*
Gross Power - Basic	73.7 HP	134 HP	134 HP
Note	Meets U.S. EPA Tier 4 Final emission standards.	*Meets U.S. EPA Tier 4 Final emission standards.	*Meets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight	22002 lb	-	31700 lb
Dimensions
Height	8 ft	-	-
Width	8 ft	-	-
Wheel Base	11.25 ft	-	-
Length - Fork Face	18.5 ft	-	-
Ground Clearance	17 in	-	-
Turning Radius - Over Tires	12 ft	-	-
Tires
Standard	370/75-28 Duraforce Air	400/75-28 Duraforce Air	400/75-28 Duraforce Air
Optional (1)	370/75-28 Duraforce Foam Fill	-	-
Optional (2)	315/95-28 Telemaster Solid	-	-
Optional (3)	13.00-24 16PR Air	-	-
Optional (4)	13.00-24 12PR Foam	-	-
Optional (5)	370/75-28 Non-Marking Air	-	-
Optional	370/75-28 Non-Marking Foam	400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 17.5 × 25 16PR Air; 17.5 × 25 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam	400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam
Service Refill Capacities
Fuel Tank	38.3 gal (US)	38 gal (US)	38 gal (US)
Hydraulic System	42 gal (US)	50 gal (US)	49 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	5.7 gal (US)	5.7 gal (US)
Boom Performance
Boom Up	15 s	17 s	15 s
Boom Down	10.3 s	14.4 s	13 s
Tele In	9.5 s	15.3 s	15.3 s
Tele Out	16.3 s	19.7 s	19.7 s
Hydraulic System
Gear Pump	Single-section	-	-
Auxiliary Hydraulic Pressure	3481 psi	3307 psi	3307 psi
Auxiliary Hydraulic Flow	18 gal/min	25 gal/min	25 gal/min
Pump Type	-	Variable displacement load sensing axial piston pump	Variable displacement load sensing axial piston pump
Braking System
Parking Brakes	Wet disc, spring applied hydraulic release on front axle	Wet disc, spring applied hydraulic release on front axle	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles	Inboard wet disc brakes on front and rear axles	Inboard wet disc brakes on front and rear axles
Axles
Type (1)	Trunnion mounted planetary 55 degree steer axles.	-	-
Type (2)	High bias limited slip differential on front axle.	-	-
Types (1)	-	Trunnion mounted planetary 55-degree steer axles	Trunnion mounted planetary 55-degree steer axles
Types (2)	-	High bias limited slip differential on front axle	High bias limited slip differential on front axle
Work Tools
Carriages - Dual Fork Positioning	50 in	-	-
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)	-	-
Pallet Forks - Option 3	[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)	-	-
Pallet Forks - Option 1	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)	-	-
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)	-	-
Carriages - Standard Tilt	50 in	-	-
Carriages - Side Shift	50 in	-	-
Carriages - Swing	100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)	-	-
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)	-	-
Transmission Speeds
Forward	4 speed	4 Speeds	4 Speeds
Reverse	3 speed	3 Speeds	3 Speeds
Optional Work Tool Attachments
Carriages: Standard Tilt - Option 1	-	50 in	50 in
Truss with Winch - Option 1	-	3 ft	3 ft
Carriages: Swing, 100°	-	72 in	72 in
Carriages: Dual Hydraulic Fork Positioner - Option 2	-	72 in	72 in
Carriages: Dual Hydraulic Fork Positioner - Option 1	-	50 in	50 in
Buckets: General Purpose - Option 1	-	1.3 yd³	1.3 yd³
Truss Booms - Option 1	-	12 ft	12 ft
Carriages: Standard Tilt - Option 3	-	72 in	72 in
Buckets: Multi Purpose	-	1.3 yd³	1.3 yd³
Forks: Pallet - Option 2	-	60 in	60 in
Note	-	*For use with 1525 mm (60 in) forks or larger	*For use with 1525 mm (60 in) forks or larger
Buckets: General Purpose - Option 2	-	2 yd³	2 yd³
Fork Extensions*	-	90 in	90 in
Forks: Pallet - Option 1	-	48 in	48 in
Coupler	-	Hydraulic IT Coupler (Includes Auxiliary Electronics)	Hydraulic IT Coupler (Includes Auxiliary Electronics)
Material Handling Arm	-	Adjustable 2-4 m (Adjustable 6.7-13.2 ft)	Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
Forks: Pallet - Option 3	-	72 in	72 in
Carriages: Side Tilt - Option 2	-	72 in	72 in
Forks: Block/Cubing	-	48 in	48 in
Truss with Winch - Option 2	-	12 ft	12 ft
Fork Mounted - Hook	-	Lifting Hook	Lifting Hook
Carriages: Side Shift	-	48 in	50 in
Truss Booms - Option 2	-	15 ft	15 ft
Buckets: Grapple	-	1.7 yd³	1.7 yd³
Fork Mounted - Hopper	-	Trash Hopper	Trash Hopper
Carriages: Side Tilt - Option 1	-	50 in	50 in
Carriages: Standard Tilt - Option 2	-	60 in	60 in
Fork Mounted - Truss Boom	-	Adjustable 2.1-3.6 m (Adjustable 7-12 ft)	Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
Fork Mounted - Work Platform	-	1220 mm × 2438 mm (4 ft × 8 ft)	1220 mm × 2438 mm (4 ft × 8 ft)
Forks: Lumber	-	-	60 in

Compare Equipment Go Back

TL642 Telehandler

TL1255 Telehandler

TL1055 Telehandler

Operating Specifications

Engine

Weights

Dimensions

Tires

Service Refill Capacities

Boom Performance

Hydraulic System

Braking System

Axles

Work Tools

Transmission Speeds

Optional Work Tool Attachments

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us