Compare Equipment Go Back

TL642 Telehandler
TL1055 Telehandler

Operating Specifications

Rated Load Capacity 6500 lb 10000 lb -
Maximum Lift Height 42 ft 54.9 ft -
Maximum Forward Reach 30 ft 42 ft -
Top Travel Speed 19 mile/h 21 mile/h -
Drawbar Pull - Loaded 20670 lbf 26510 lbf -
Turning Radius - Over Tires 12 ft 14.1 ft -
Frame Leveling 10° 10° -
Capacity at Maximum Height 6500 lb - -
Capacity at Maximum Reach 700 lb - -
Capacity at Maximum Reach (o/r Down) - 2500 lb -
Capacity at Maximum Height (o/r Down) - 5000 lb -
Maximum Lift Height (o/r Down) - 54.9 ft -
Maximum Rated Load Capacity - 10000 lb -
Operating Weight - 31700 lb -

Engine

Engine Model Cat® C3.6L Cat® C3.6L* -
Gross Power - Basic 73.7 HP 134 HP -
Note Meets U.S. EPA Tier 4 Final emission standards. *Meets U.S. EPA Tier 4 Final emission standards. -

Weights

Operating Weight 22002 lb 31700 lb -

Dimensions

Height 8 ft - -
Width 8 ft - -
Wheel Base 11.25 ft - -
Length - Fork Face 18.5 ft - -
Ground Clearance 17 in - -
Turning Radius - Over Tires 12 ft - -

Tires

Standard 370/75-28 Duraforce Air 400/75-28 Duraforce Air -
Optional (1) 370/75-28 Duraforce Foam Fill - -
Optional (2) 315/95-28 Telemaster Solid - -
Optional (3) 13.00-24 16PR Air - -
Optional (4) 13.00-24 12PR Foam - -
Optional (5) 370/75-28 Non-Marking Air - -
Optional 370/75-28 Non-Marking Foam 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam -

Service Refill Capacities

Fuel Tank 38.3 gal (US) 38 gal (US) -
Hydraulic System 42 gal (US) 49 gal (US) -
Diesel Exhaust Fluid (DEF) Tank - 5.7 gal (US) -

Boom Performance

Boom Up 15 s 15 s -
Boom Down 10.3 s 13 s -
Tele In 9.5 s 15.3 s -
Tele Out 16.3 s 19.7 s -

Hydraulic System

Gear Pump Single-section - -
Auxiliary Hydraulic Pressure 3481 psi 3307 psi -
Auxiliary Hydraulic Flow 18 gal/min 25 gal/min -
Pump Type - Variable displacement load sensing axial piston pump -

Braking System

Parking Brakes Wet disc, spring applied hydraulic release on front axle Wet disc, spring applied hydraulic release on front axle -
Service Brakes Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front and rear axles -

Axles

Type (1) Trunnion mounted planetary 55 degree steer axles. - -
Type (2) High bias limited slip differential on front axle. - -
Types (1) - Trunnion mounted planetary 55-degree steer axles -
Types (2) - High bias limited slip differential on front axle -

Work Tools

Carriages - Dual Fork Positioning 50 in - -
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) - -
Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) - -
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) - -
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) - -
Carriages - Standard Tilt 50 in - -
Carriages - Side Shift 50 in - -
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) - -
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) - -

Transmission Speeds

Forward 4 speed 4 Speeds -
Reverse 3 speed 3 Speeds -

Optional Work Tool Attachments

Carriages: Standard Tilt - Option 3 - 72 in -
Fork Mounted - Work Platform - 1220 mm × 2438 mm (4 ft × 8 ft) -
Carriages: Standard Tilt - Option 1 - 50 in -
Forks: Pallet - Option 2 - 60 in -
Carriages: Side Tilt - Option 1 - 50 in -
Truss with Winch - Option 1 - 3 ft -
Truss with Winch - Option 2 - 12 ft -
Carriages: Dual Hydraulic Fork Positioner - Option 1 - 50 in -
Buckets: Multi Purpose - 1.3 yd³ -
Carriages: Dual Hydraulic Fork Positioner - Option 2 - 72 in -
Forks: Pallet - Option 3 - 72 in -
Material Handling Arm - Adjustable 2-4 m (Adjustable 6.7-13.2 ft) -
Forks: Lumber - 60 in -
Forks: Pallet - Option 1 - 48 in -
Carriages: Swing, 100° - 72 in -
Fork Extensions* - 90 in -
Buckets: General Purpose - Option 2 - 2 yd³ -
Buckets: Grapple - 1.7 yd³ -
Carriages: Standard Tilt - Option 2 - 60 in -
Fork Mounted - Hook - Lifting Hook -
Carriages: Side Tilt - Option 2 - 72 in -
Truss Booms - Option 2 - 15 ft -
Forks: Block/Cubing - 48 in -
Buckets: General Purpose - Option 1 - 1.3 yd³ -
Note - *For use with 1525 mm (60 in) forks or larger -
Truss Booms - Option 1 - 12 ft -
Carriages: Side Shift - 50 in -
Fork Mounted - Truss Boom - Adjustable 2.1-3.6 m (Adjustable 7-12 ft) -
Coupler - Hydraulic IT Coupler (Includes Auxiliary Electronics) -
Fork Mounted - Hopper - Trash Hopper -
Add a Similar Product:
  • TL1255 Telehandler Add
  • TL642 w/StabilizersTelehandler Add
  • TL943 Telehandler Add
  • TL943 w/Stabilizers Telehandler Add
  • TH255C Telehandler Add