Compare Equipment Go Back
|
|
 6060 Hydraulic Mining Shovel |
|
|
General |
|||
|---|---|---|---|
| Engine Output - SAE J1995 | - | 3015 HP | - |
| Bucket Payload | - | 67 ton (US) | - |
| Operating Weight | - | 660 ton (US) | - |
| Note | - | Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. | - |
Engine |
|||
| Engine Model | - | 2 x Cat 3512E | - |
Diesel Engines |
|||
| Rated Speed | - | 1,800 min-1 (1,800 rpm) | - |
| Number of Cylinders - Each Engine | - | 12 | - |
| Bore | - | 6.69 in | - |
| Stroke | - | 8.46 in | - |
| Displacement | - | 3574 in³ | - |
| Aspiration | - | Turbocharged and charge air-cooled | - |
| Components (1) | - | Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) | - |
| Components (2) | - | High-capacity water separator | - |
| Components (3) | - | Two-stage fuel filter with series filtration | - |
| Components (4) | - | Heavy-duty air filters | - |
| Components (5) | - | Microprocessed engine management | - |
| Components (6) | - | Hydraulically driven radiator fan with electronically controlled fan speed | - |
| Components (7) | - | Exhaust manifold and turbo heat shields | - |
Diesel Engine - Lesser Regulated |
|||
| Gross Power - SAE J1995 | - | 3025 HP | - |
| Net Power - ISO 9249 | - | 2990 HP | - |
| Net Power - SAE J1349 | - | 2821 HP | - |
| Emissions | - | Optimized for fuel consumption. | - |
Diesel Engine - Highly Regulated |
|||
| Gross Power - SAE J1995 | - | 3015 HP | - |
| Net Power - SAE J1349 | - | 2810 HP | - |
| Net Power - ISO 9249 | - | 2979 HP | - |
| Emissions | - | Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. | - |
Electrical System |
|||
| System Voltage | - | 24 V | - |
| Batteries in Series/Parallel Installation | - | 6 x 210 Ah; 12 V each; 630 Ah 24 V in total | - |
| Components (1) | - | 6 maintenance-free batteries | - |
| Components (2) | - | Lockable battery isolator switch | - |
| Components (3) | - | Lockable starter isolator switch | - |
| Components (4) | - | 13 LED high-brightness working flood lights | - |
| Components (5) | - | 17 LED service lights | - |
| Components (6) | - | 2 electric horns (1 cab module; 1 oil cooler module) | - |
Operating Weights |
|||
| 6060 FS - Standard Track Pads | - | 4.58 ft | - |
| 6060 FS - Operating Weight | - | 1320110 lb | - |
| 6060 FS - Ground Pressure | - | 26.6 N/cm2 (38.5 psi) | - |
| Backhoe - Standard Track Pads | - | 4.58 ft | - |
| Backhoe - Operating Weight | - | 1323860 lb | - |
| Backhoe - Ground Pressure | - | 26.7 N/cm2 (38.7 psi) | - |
| Note | - | Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. | - |
Service Refill Capacities |
|||
| Fuel Tank | - | 3136 gal (US) | - |
| Hydraulic Tank | - | 1876 gal (US) | - |
| Hydraulic System - Including Tank | - | 2483 gal (US) | - |
| Engine Oil | - | 86.6 gal (US) | - |
| Cooling System | - | 211.4 gal (US) | - |
| Swing Drive | - | 42.4 gal (US) | - |
| Grease Tank | - | 188 gal (US) | - |
Hydraulic System with Pump Managing System |
|||
| Main Pumps - Diesel Version | - | 8 variable swash plate pumps | - |
| Main Pumps - Maximum Oil Flow - Diesel Version | - | 8 x 650 L/min (8 x 172 gal/min) | - |
| Maximum Pressure - Attachment | - | 4640 psi | - |
| Maximum Pressure - Travel | - | 5220 psi | - |
| Swing Pumps - Diesel Version | - | 4 reversible swash plate pumps | - |
| Swing Pumps - Maximum Oil Flow - Diesel Version | - | 4 x 352 L/min (4 x 93 gal/min) | - |
| Maximum Pressure - Swing Pumps | - | 5075 psi | - |
Hydraulic Oil Cooling |
|||
| Oil Flow of Cooling Pumps | - | 4 x 488 L/min (4 x 129 gal/min) | - |
| Components | - | 4 cooling fans | - |
| Diameter - Fan | - | 46 in | - |
| Features (1) | - | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running | - |
| Features (2) | - | Fan speed and flow of oil to the coolers are thermostatically controlled | - |
| Features (3) | - | Extremely high cooling efficiency to ensure optimum oil temperature | - |
| Features (4) | - | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers | - |
Swing System |
|||
| Swing Drive | - | 4 compact planetary transmissions with axial piston motors | - |
| Parking Brakes | - | Wet multiple disc brake, spring loaded/hydraulically released | - |
| Maximum Swing Speed | - | 3.8 r/min | - |
| Swing Ring | - | Triple-race roller bearing with sealed internal gearing | - |
| Features (1) | - | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody | - |
| Features (2) | - | Closed-loop swing circuit with torque control | - |
| Features (3) | - | Hydraulic braking of the swing motion by counteracting control | - |
| Features (4) | - | All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system | - |
Undercarriage |
|||
| Travel Speed - 1st Stage - Maximum | - | 0.68 mile/h | - |
| Travel Speed - 2nd Stage - Maximum | - | 0.99 mile/h | - |
| Maximum Tractive Force | - | 661160 lb | - |
| Gradeability - Travel Drives - Maximum | - | 39 % | - |
| Track Pads - Each Side | - | 42 | - |
| Bottom Rollers - Each Side | - | 7 | - |
| Support Rollers - Each Side | - | 2 plus a skid plate in between | - |
| Travel Drives - Each Side | - | 1 planetary transmission with 2 two-stage axial piston motors | - |
| Components (1) | - | HD tracks with cast double-grouser track pad | - |
| Components (2) | - | HD fixed axle rollers and idlers | - |
| Components (3) | - | Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas | - |
| Components (4) | - | Acoustic travel alarm (forward and reverse) | - |
| Components (5) | - | Fully hydraulic, self-adjusting track tensioning system with piston accumulator | - |
| Components (6) | - | Automatic hydraulic retarder valve to prevent over-speed on downhill travel | - |
Operator's Cab |
|||
| Operator's Eye Level - Approximately | - | 24.91 ft | - |
| Internal Dimensions of Cab - Length | - | 7.33 ft | - |
| Internal Dimensions of Cab - Width | - | 5.33 ft | - |
| Internal Dimensions of Cab - Height | - | 6.75 ft | - |
| Components (1) | - | Single hydraulically driven HVAC System, with dual system option | - |
| Components (2) | - | In-floor window with removable grate | - |
| Components (3) | - | Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support | - |
| Components (4) | - | Independently adjustable seat consoles with integrated joysticks | - |
| Components (5) | - | Operator Protective Guard (Top Guard) (ISO 10262:1998) | - |
| Components (6) | - | Elevated full-size trainer seat with safety belt and laptop desk | - |
| Components (7) | - | Additional fold-away auxiliary seat with safety belt | - |
| Components (8) | - | Operator Presence switch | - |
| Components (9) | - | Monitoring system with 254 mm (10 in) touch screen | - |
| Components (10) | - | Powered 45 degree access stairway | - |
| Components (11) | - | Emergency egress ladder | - |
| Components (12) | - | FM/AM radio with USB and AUX input | - |
| Components (13) | - | Roller blinds on 3 front windows | - |
| Components (14) | - | 3 cup holders | - |
| Components (15) | - | Cat Electronic Technician service port | - |
Automatic Lubrication System |
|||
| Capacity - Grease Container | - | 188 gal (US) | - |
| Type (1) | - | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times | - |
| Type (2) | - | System failures displayed by monitoring system | - |
| Type (3) | - | Grease filters (200 µm) between service station and container as well as directly behind grease pump | - |
| Type (4) | - | Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring | - |
Attachments |
|||
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | - | Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | - | Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - | Constant boom momentum throughout the entire lift arc; Crowd force assistance | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | - | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - | Wing shrouds on side walls and heel shrouds at bottom edges | - |
| Type (1) | - | Catwalks with rails at booms (FS and BH) | - |
| Type (2) | - | Guards for shovel cylinders (FS) | - |
| Type (3) | - | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve | - |
| Type (4) | - | Service access holes from both sides of boom (FS and BH) and stick (FS) | - |
| Type (5) | - | Welding procedures allow for internal counter-welding (double prep weld) wherever possible | - |
| Type (6) | - | Booms and sticks are stress-relieved after welding | - |
| Type (7) | - | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas | - |
| Type (8) | - | Special wear packages for highly abrasive materials available upon request | - |
Digging Forces |
|||
| Maximum Crowd Force | - | 494410 lb | - |
| Maximum Breakout Force | - | 388780 lb | - |
Working Ranges |
|||
| Maximum Digging Height | - | 51.17 ft | - |
| Maximum Digging Reach | - | 54.17 ft | - |
| Maximum Digging Depth | - | 9.17 ft | - |
Standard Bucket Capacity |
|||
| Face Shovel (heaped 2:1) | - | 44.5 yd³ | - |
| Backhoe (heaped 1:1) | - | 44.5 yd³ | - |
Backhoe Attachment (BH) - Digging Forces |
|||
| Stick Digging Force - ISO | - | 295740 lb | - |
| Bucket Digging Force - ISO | - | 274840 lb | - |
Backhoe Attachment (BH) - Working Range |
|||
| Maximum Digging Height | - | 52.83 ft | - |
| Maximum Digging Reach | - | 62.33 ft | - |
| Maximum Digging Depth | - | 29.17 ft | - |
Retractable Service Station |
|||
| Installation | - | Retractable service station installed underneath the engine module and easily accessible from ground. | - |
| Equipped With (1) | - | Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container | - |
| Equipped With (2) | - | Cat jump-start socket | - |
| Equipped With (3) | - | Indicator lights | - |
Add a Similar Product:
There are no similar products.