Compare Equipment Go Back
|
|
 6040 Hydraulic Mining Shovel |
|
|
General |
|||
|---|---|---|---|
| Engine Output - SAE J1995 | - | 2079 HP | - |
| Bucket Payload | - | 43.7 ton (US) | - |
| Operating Weight | - | 446 ton (US) | - |
| Note | - | Specifications above apply to the HRC Face Shovel configuration. Backhoe and Frontless configurations are also available for both HRC and LRC. | - |
Engine |
|||
| Engine Model | - | 2 x Cat C32 | - |
| Gross Power - SAE J1995 | - | 2079 HP | - |
| Net Power - SAE J1349 | - | 1915 HP | - |
| Note | - | Power output relates to highly regulated engines. Lesser regulated engines are also available. | - |
Diesel Engines |
|||
| Number of Cylinders - Each Engine | - | 12 | - |
| Bore | - | 5.71 in | - |
| Stroke | - | 6.38 in | - |
| Displacement | - | 1959 in³ | - |
| Aspiration | - | Turbocharged and air-to-air aftercooled | - |
| Components (1) | - | Additional high-capacity water separator | - |
| Components (2) | - | Two-stage fuel filter including water separator | - |
| Components (3) | - | Heavy-duty air filters | - |
| Components (4) | - | Microprocessed engine management | - |
| Components (5) | - | Hydraulically driven radiator fan with electronically controlled fan speed | - |
| Fuel Tank Capacity | - | 2098 gal (US) | - |
| Emissions | - | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards | - |
Electrical System - Diesel Drive |
|||
| System Voltage | - | 24V | - |
| Batteries in Series/Parallel Installation | - | 6 x 210 Ah - 12 V each; 630 Ah - 24 V in total | - |
| Components (1) | - | 6 maintenance-free batteries | - |
| Components (2) | - | Battery isolation relays and switches | - |
| Components (3) | - | Emergency stop switches accessible from ground level, in engine module and in operator's cab | - |
| Components (4) | - | 14 LED high-brightness working flood lights | - |
| Components (5) | - | 11 LED high-brightness service lights | - |
Operating Weights |
|||
| 6040 FS - Standard Track Pads | - | 3.9 ft | - |
| 6040 FS - Operating Weight | - | 891980 lb | - |
| 6040 FS - Ground Pressure | - | 24.1 N/cm2 (35.0 psi) | - |
| 6040 - Standard Track Pads | - | 3.9 ft | - |
| 6040 - Operating Weight | - | 897930 lb | - |
| 6040 - Ground Pressure | - | 24.3 N/cm2 (35.3 psi) | - |
| Note | - | 1600 mm track pads available as option | - |
| 6040 FS - Note | - | Other track pads available on request | - |
Hydraulic System with Pump Managing System |
|||
| Hydraulic Tank Capacity - Diesel Version - Approximately | - | 898 gal (US) | - |
| Total Volume of Hydraulic Oil - Diesel Version - Approximately | - | 1532 gal (US) | - |
| Main Pumps - Diesel Version | - | 4 x variable swash plate pumps | - |
| Main Pumps - Maximum Oil Flow - Diesel Version | - | 4 x 724 L/min (4 x 191 gal/min) | - |
| Maximum Pressure - Attachment | - | 4350 psi | - |
| Maximum Pressure - Travel | - | 5080 psi | - |
| Swing Pumps - Diesel Version | - | 4 x reversible swash plate pump | - |
| Swing Pumps - Maximum Oil Flow - Diesel Version | - | 4 x 321 L/min (4 x 85 gal/min) | - |
| Maximum Pressure - Swing Pumps | - | 5080 psi | - |
Hydraulic Oil Cooling |
|||
| Diameter - Fan | - | 2 × 1524 mm (2 × 60 in) | - |
| Oil Flow of Cooling Pumps - Diesel Version | - | 2 x 799 L/min (2 x 211 gal/min) | - |
| Features (1) | - | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running | - |
| Features (2) | - | Fan speed is thermostatically controlled | - |
| Features (3) | - | Extremely high cooling efficiency to ensure optimum oil temperature | - |
| Components (1) | - | Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers | - |
| Components (2) | - | Variable axial piston pumps supplying low-volume, high-pressure oil to fans | - |
Swing System |
|||
| Swing Drive | - | 3 compact planetary transmissions with axial piston motors | - |
| Parking Brake | - | Wet multiple disc brake, spring-loaded/hydraulically released | - |
| Maximum Swing Speed - Diesel Version | - | 4.7 r/min | - |
| Swing Ring | - | Triple-race roller bearing with sealed internal gearing | - |
| Features (1) | - | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody | - |
| Features (2) | - | Closed-loop swing circuit with torque control | - |
| Features (3) | - | Hydraulic braking of the swing motion by counteracting control | - |
| Features (4) | - | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system | - |
Undercarriage |
|||
| Travel Speed - 1st Stage - Maximum | - | 0.93 mile/h | - |
| Travel Speed - 2nd Stage - Maximum | - | 1.55 mile/h | - |
| Maximum Tractive Force | - | 471260 lb | - |
| Gradeability - Travel Drives - Maximum | - | 57 % | - |
| Track Pads - Each Side | - | 42 | - |
| Bottom Rollers - Each Side | - | 7 | - |
| Support Rollers - Each Side | - | 2 plus a skid plate in between | - |
| Travel Drives - Each Side | - | 1 planetary transmission with 2 two-stage axial piston motors | - |
| Parking Brake | - | Wet multiple disc brake, spring applied/hydraulically released | - |
| Components (1) | - | All running surfaces of sprockets, idlers, rollers and track links are hardened | - |
| Components (2) | - | Acoustic travel alarm | - |
| Components (3) | - | Cast double-grouser combined pad-links with bushings connected by hardened full floating pins | - |
| Components (4) | - | All teeth contact areas of sprocket and pad links are hardened | - |
| Components (5) | - | Fully hydraulic self-adjusting track tensioning system with membrane accumulator | - |
| Components (6) | - | Automatic hydraulic retarder valve to prevent over-speed on downhill travel | - |
Operator's Cab |
|||
| Operator's Eye Level - Approximately | - | 22.31 ft | - |
| Internal Dimensions of Cab - Length | - | 7.22 ft | - |
| Internal Dimensions of Cab - Width | - | 5.25 ft | - |
| Internal Dimensions of Cab - Height | - | 7.05 ft | - |
| Components (1) | - | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat | - |
| Components (2) | - | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests | - |
| Components (3) | - | Roller blinds at all windows | - |
| Components (4) | - | Windshield with parallel intermittent wiper/washer | - |
| Components (5) | - | All-round safety glass, armored windshield and sliding side window | - |
| Components (6) | - | Operator Protective Guard (Top Guard) | - |
| Components (7) | - | Single HVAC with option for Dual HVAC | - |
| Components (8) | - | Joystick controls integrated in independently adjustable seat consoles | - |
| Components (9) | - | Fold-away auxiliary seat with safety belt | - |
| Components (10) | - | External sun shields at side and rear windows | - |
| Components (11) | - | Sliding emergency ladder (kick-down type) with ladder cage | - |
| Components (12) | - | Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated | - |
| Components (13) | - | Robust instrument panel including large colored BCS screen with transflective technology | - |
| Board Control System (BCS III) Features (1) | - | USB, Lan (TCP/IP) and CAN BUS interfaces for data export | - |
| Board Control System (BCS III) Features (2) | - | On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram) | - |
| Board Control System (BCS III) Features (3) | - | Robust instrument panel including large (12 in) colored touch screen for intuitive handling | - |
| Board Control System (BCS III) Features (4) | - | Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems | - |
| Board Control System (BCS III) Features (5) | - | On-screen troubleshooting assistance | - |
| Board Control System (BCS III) Features (6) | - | Graphic charts of logged data | - |
| Board Control System (BCS III) Features (7) | - | Fault memory with storage of related conditions | - |
Automatic Lubrication System |
|||
| Capacity - Grease Container | - | 188 gal (US) | - |
| Type (1) | - | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times | - |
| Type (2) | - | System failures displayed by Board Control System | - |
| Type (3) | - | Grease filters (200 µm) between service station and container, as well as directly behind grease pump | - |
| Type (4) | - | Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders | - |
| Type (5) | - | Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring | - |
Attachments |
|||
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | - | - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - | - Wing shrouds on side walls - Heel shrouds at bottom edges | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | - | - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | - | - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - | - Constant boom momentum throughout the whole lift arc - Crowd force assistance | - |
| Type (1) | - | Inspection hole in monoboom BH | - |
| Type (2) | - | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve | - |
| Type (3) | - | Special wear packages for highly abrasive materials on request | - |
| Type (4) | - | Catwalks with rails at boom (FS and BH) | - |
| Type (5) | - | Welding procedures allow for internal counter-welding (double prep weld) wherever possible | - |
| Type (6) | - | Boom and sticks are stress-relieved after welding | - |
| Type (7) | - | Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas | - |
| Type (8) | - | Guards for shovel cylinders (FS) | - |
Bucket |
|||
| Bucket Capacity - Backhoe (heaped 1:1) | - | 28.8 yd³ | - |
| Bucket Capacity - Face Shovel (heaped 2:1) | - | 28.8 yd³ | - |
Retractable Service Station |
|||
| Installation | - | Retractable service station installed underneath the engine module and easily accessible from ground | - |
Add a Similar Product:
There are no similar products.