Compare

Compare Equipment Go Back

Engine
	D5 Dozer View Product	D9 Dozer View Product Remove	D11 Dozer View Product Remove	D3 Track-Type Tractor View Product Remove
Engine Model	Cat C7.1	-	-	Cat® C3.6
Power - Net	170 HP	-	-	104 HP
Net Power - Rated - ISO 9249/SAE J1349	170 HP	-	-	-
Net Power (Rated) - ISO 9249 (DIN)	172 mhp	-	-	-
Emissions	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)/Korea Stage V	-	-	-
Note (1)	Rated horsepower at 1770 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at	-	-	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (	-	-	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Note (3)	Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.	-	-	-
Note (4)	Machine Build Number 17B	-	-	-
Displacement	-	-	-	220 in³
Net Power - 2,200 rpm - SAE J1349	-	-	-	104 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	-	-	-	104 HP
Power Train	-	-	-	Hydrostatic
Weights
Operating Weight	42263 lb	110225 lb	229800 lb	20640 lb
Shipping Weight	-	84373 lb	-	-
Note (1)	-	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.	D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2)	-	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.	D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.	For machine with ripper, add 554 kg (1,222 lb).
Operating Weight - Carrydozer	-	-	250665 lb	-
Operating Weight - LGP	-	-	-	21369 lb
Operating Weight - LGP, 762 mm/30 in	-	-	-	21810 lb
Transmission
Power Train	Fully Automatic 3-Speed	-	-	-
1.0 Forward	-	2.2 mile/h	2.5 mile/h	-
2.0 Forward	-	3.9 mile/h	4.4 mile/h	-
3.0 Forward	-	6.8 mile/h	7.6 mile/h	-
1.0 Reverse	-	2.7 mile/h	3 mile/h	-
2.0 Reverse	-	4.8 mile/h	5.3 mile/h	-
3.0 Reverse	-	8.4 mile/h	9.1 mile/h	-
Type	-	Planetary powershift	-	-
Drawbar Pull - 3 Forward	-	-	46250 ft·lbf	-
Drawbar Pull - 1 Forward	-	-	148200 ft·lbf	-
Drawbar Pull - 2 Forward	-	-	82300 ft·lbf	-
Drive Pumps	-	-	-	1
Maximum Travel Speed - Forward	-	-	-	5.6 mile/h
Maximum Travel Speed - Reverse	-	-	-	6.2 mile/h
Track Motors	-	-	-	2
Relief Valve Settings	-	-	-	7033 psi
Service Refill Capacities
Fuel Tank	83.2 gal (US)	-	-	51.5 gal (US)
DEF Tank	4.2 gal (US)	-	-	-
Cooling System	-	-	46.8 gal (US)	5 gal (US)
Cooling System Refill - Tier 2 Equivalent Engine	-	-	41.7 gal (US)	-
Engine Crankcase	-	-	35.1 gal (US)	-
Power Train	-	-	120 gal (US)	-
Power Train - Refill Volume	-	-	103.3 gal (US)	-
Final Drive - Each	-	-	12.4 gal (US)	-
Roller Frames - Each	-	-	24.8 gal (US)	-
Hydraulic Tank	-	-	42.2 gal (US)	-
Hydraulic System Tank and Chassis	-	-	64.7 gal (US)	-
Hydraulic System Chassis + Blade and Ripper (Standard)	-	-	117.6 gal (US)	-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	-	-	143.4 gal (US)	-
Final Drive - Each - LGP	-	-	-	2.6 gal (US)
Crankcase - With Filter	-	-	-	2.8 gal (US)
Transmission - Hydraulic Tank	-	-	-	23.8 gal (US)
Final Drives - Each Side	-	-	-	2.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	-	4.9 gal (US)
VPAT
Operating Weight	37875 lb	-	-	-
Ground Pressure	6.9 psi	-	-	-
Width of Standard Shoe	24 in	-	-	-
Blade	VPAT	-	-	-
Blade Capacity	4.6 yd³	-	-	-
LGP VPAT
Operating Weight	42263 lb	-	-	-
Ground Pressure	4.7 psi	-	-	-
Width of Standard Shoe	33 in	-	-	-
Blade	LGP VPAT	-	-	-
Blade Capacity	5.5 yd³	-	-	-
Fine Grading VPAT
Operating Weight	39198 lb	-	-	-
Ground Pressure	6 psi	-	-	-
Width of Standard Shoe	24 in	-	-	-
Blade	VPAT	-	-	-
Blade Capacity	4.6 yd³	-	-	-
Push Arm
Operating Weight	38228 lb	-	-	-
Ground Pressure	7 psi	-	-	-
Width of Standard Shoe	24 in	-	-	-
Blade	Semi-Universal (SU)	-	-	-
Blade Capacity	5.6 yd³	-	-	-
Sustainability
Recyclability	97%	-	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.	-	The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Note (1)	-	-	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)	-

Note (1)	Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.	-	-	-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	Cat® C18	-	-
Engine Power - Net SAE J1349/ISO 9249	-	452 HP	-	-
Bore	-	5.7 in³	-	-
Stroke	-	7.2 in	-	-
Displacement	-	1106 in³	-	-
Engine Power - Gross SAE J1995	-	487 HP	-	-
Engine Power - ISO 14396	-	479 HP	-	-
Emissions	-	U.S. EPA Tier 2 or Tier 3 equivalent	-	-
Note (1)	-	All engine ratings apply at 1,750 rpm.	-	-
Note (2)	-	No derating required up to 4267 m (14,000 ft) altitude.	-	-
Undercarriage
Shoe Type	-	Extreme Service	Extreme Service	-
Width - Shoe	-	24 in	28 in	-
Shoes/Side	-	43	41	-
Grouser Height	-	3.3 in	4 in	-
Pitch	-	9.4 in	12.5 in	-
Ground Clearance	-	18.1 in	-	-
Track Gauge	-	88.6 in	114 in	63 in
Length - Track on Ground	-	136.6 in	175 in	-
Ground Contact Area	-	45.6 ft²	9781 in²	-
Track Rollers/Side	-	8	8	-
Number of Carrier Rollers	-	1 per side (optional)	1 per side (optional)	-
Width - Shoe - CD	-	-	36 in	-
Ground Clearance*	-	-	30.6 in	-
Ground Contact Area - CD	-	-	12605 in²	-
Ground Pressure - LGP	-	-	-	4.5 psi
Track Gauge - LGP	-	-	-	69 in
Length - Track on Ground - LGP	-	-	-	91 in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	-	-	-	40
Ground Pressure - LGP, 762 mm (30 in)	-	-	-	3.9 psi
Length - Track on Ground - LGP, 762 mm (30 in)	-	-	-	91 in
Shoe Width - LGP	-	-	-	26 in
Shoe Width - LGP, 762 mm (30 in)	-	-	-	30 in
Number of Rollers - Each Side	-	-	-	7
Track Gauge - LGP, 762 mm (30 in)	-	-	-	73 in
Ground Pressure	-	-	-	5.7 psi
Length of Track on Ground	-	-	-	91 in
Number of Shoes - Each Side - Abrasion Undercarriage	-	-	-	36
Shoe Width - Standard	-	-	-	20 in
Standards
ROPS	-	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008	-
FOPS	-	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II	-
Sound	-	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling	-	-
Sound (1)	-	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).	-
Sound (2)	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.	The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).	-
Steering and Brakes
Steering Type	-	Differential	-	-
Brake Type	-	Spring Applied Wet Disc	-	-
Brake Diameter	-	15.5 in	-	-
Brake Count	-	8	-	-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	-	Cat® C18	Cat® C32	-
Bore	-	5.7 in³	-	-
Stroke	-	7.2 in³	-	-
Displacement	-	1106 in³	1959 in³	-
Engine Power - Gross SAE J1995	-	477 HP	-	-
Engine Power - ISO 14396	-	468 HP	-	-
Engine Power - Net SAE J1349/ISO 9249	-	440 HP	-	-
Emissions	-	U.S. EPA Tier 4 / EU Stage V	-	-
Note (1)	-	All Engine ratings apply at 1,750 rpm.	*Excludes all fan losses.	-
Note (2)	-	No derating required up to 2499 m (8,200 ft).	Engine ratings apply at 1,800 rpm.	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	-	850 HP	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	-	955 HP	-
Note (3)	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	-
FLUID CAPACITIES
Fuel Tank (Splash Fill)	-	254 gal (US)	-	-
DEF Tank (Tier 4 only)	-	9.5 gal (US)	-	-
Fuel Tank (Fast Fill)	-	248 gal (US)	-	-
Cooling System	-	21 gal (US)	-	-
Engine Crankcase*	-	10 gal (US)	-	-
Powertrain	-	40 gal (US)	-	-
Final Drives (each)	-	4 gal (US)	-	-
Roller Frames (each)	-	12 gal (US)	-	-
Pivot Shaft Oil	-	8 gal (US)	-	-
Hydraulic System Tank	-	24 gal (US)	-	-
Note	-	*With oil filters.	-	-
Note 2	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or	-	-
Note 3	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.	-	-
Note 4	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.	-	-
Hydraulic Controls
Pump Type	-	Piston-type geared to flywheel	Variable displacement piston pump	-
Pump Output - Steering	-	96 gal/min	-	-
Fan Pump	-	21 gal/min	-	-
Tilt Cylinder Flow - Rod End Flow	-	53 gal/min	-	-
Tilt Cylinder Flow - Head End Flow	-	53 gal/min	-	-
Lift Cylinder Relief Valve Setting	-	3800 lbf/in	-	-
Tilt Cylinder Relief Valve Setting	-	2799 psi	-	-
Ripper - Lift - Relief Valve Setting	-	3800 psi	-	-
Ripper - Pitch - Relief Valve Setting	-	3800 psi	-	-
Steering System - Pressure	-	5874 psi	-	-
Tank Capacity	-	24 gal/min	-	-
Note (1)	-	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).	-	-
Note (2)	-	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).	-	-
Note (3)	-	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)	-	-
Combined Pump Output - Implement	-	-	177 gal/min	-
Pump Output	-	-	-	17.2 gal/min
Relief Valve Settings	-	-	-	2988 psi
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	17.8 yd³	-	-
Blade Width (over end bits)	-	171.3 in	-	-
Blade Height	-	76.1 in	-	-
Maximum Digging Depth	-	23.9 in	-	-
Ground Clearance at Full Lift	-	56 in	-	-
Maximum Tilt	-	37 in	-	-
Blade Weight	-	10587 lb	-	-
Total Operating Weight* (with blade and single-shank ripper)	-	110205 lb	-	-
Note	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Blade - Universal
Blade Capacity (SAE J1265)	-	21.7 yd³	-	-
Blade Width (over end bits)	-	184.3 in	-	-
Blade Height	-	76.1 in	-	-
Maximum Digging Depth	-	23.9 in	-	-
Ground Clearance at Full Lift	-	56 in	-	-
Maximum Tilt	-	39.9 in	-	-
Blade Weight	-	12016 lb	-	-
Total Operating Weight* (with blade and single-shank ripper)	-	111362 lb	-	-
Note	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	-	35520 lbf	66000 lb	-
Maximum penetration depth (standard tip)	-	48.5 in	63.5 in	-
Pryout Force	-	74637 lbf	148510 lb	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	34.7 in	-	-
Number of Pockets	-	1	-	-
Weight	-	10701 lb	-	-
Total Operating Weight* (with SU Blade and noted ripper)	-	110205 lb	-	-
Note	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	-	38667 lbf	66110 lb	-
Maximum penetration depth (standard tip)	-	68 in	85.5 in	-
Pryout Force	-	74412 lbf	148510 lb	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	32.2 in	-	-
Number of Pockets	-	1	-	-
Weight	-	10981 lb	-	-
Total Operating Weight* (with SU Blade and noted ripper)	-	110485 lb	-	-
Note	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical	-	34621 lbf	77350 lb	-
Maximum Penetration - Standard Tip	-	31.4 in	43.3 in	-
Pry-Out Force - Multi-Shank Ripper with One Tooth	-	81156 lbf	145640 lb	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	34.6 in	-	-
Number of Pockets	-	3	-	-
Weight	-	12136 lb	-	-
Total Operating Weight* - With SU-Blade and Ripper	-	111739 lb	-	-
Note	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Overall Beam Width	-	-	131.1 in	-
Dimensions (Approximate)
Ground Clearance*	-	18.1 in	-	-
Track Gauge	-	88.6 in	-	-
Width - Without Trunnions - Standard Shoe	-	113 in	-	-
Width - Over Trunnions	-	130.3 in	-	-
Height - FOPS Cab*	-	150.4 in	-	-
Height - Top of Stack*	-	152.6 in	-	-
Height - ROPS/Canopy*	-	157.5 in	-	-
Drawbar Height (Center of Clevis)*	-	30 in	-	-
Length - Track on Ground	-	136.6 in	-	-
Overall Length - Basic Tractor	-	193.3 in	-	-
Length - Basic Tractor - With Drawbar	-	206.4 in	-	-
Length - Basic Tractor - With Winch	-	218.3 in	-	-
Length - With SU-Blade**	-	259.9 in	-	-
Length - With U-Blade	-	274.3 in	-	-
Length - With Single-Shank Ripper	-	257 in	-	-
Length - With Multi-Shank Ripper	-	257.4 in	-	-
Overall Length - SU-Blade/SS Ripper	-	323.6 in	-	-
Note (1)	-	*Includes grouser height for total dimensions on hard surfaces.	-	-
Winches
Winch Model	-	PA 140VS	-	-
Weight*	-	3950 lb	-	-
Oil Capacity	-	4 gal (US)	-	-
Drum Width	-	12.6 in	-	-
Wire Cable Diameter - Recommended	-	1.13 in	-	-
Wire Cable Diameter - Optional	-	1.25 ft	-	-
Maximum Drum Capacity - Recommended Cable Length	-	257 in	-	-
Maximum Drum Capacity - Optional Cable Length	-	204 ft	-	-
Wire Cable Ferrule Size - Outside Diameter	-	2.4 in	-	-
Wire Cable Ferrule Size - Length	-	2.8 in	-	-
Note	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).	-	-
Note (2)	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.	-	-
Blades
Semi-Universal (SU)* Capacity	-	-	35.6 yd³	-
Semi-Universal (SU)* Width Over Endbits	-	-	219.8 in	-
U-Blade Capacity	-	-	45 yd³	-
U-Blade Width	-	-	249.6 in	-
Reclamation Universal - Blade capacity (SAE J1265)	-	-	55 yd³	-
Reclamation Universal - Width with blade (over end bits)	-	-	251.8 in	-
Carry Dozer - Blade capacity (SAE J1265)	-	-	57 yd³	-
Carry Dozer - Width with blade (over end bits)	-	-	263.9 in	-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	-	-	Cat® C32	-
Displacement	-	-	1959 in³	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	-	850 HP	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	-	957 HP	-
Note (1)	-	-	*Excludes all fan losses.	-
Note (2)	-	-	Engine ratings apply at 1,800 rpm.	-
Note (3)	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	-
Fuel Tank Capacities
Fuel Tank - Total Volume	-	-	500 gal (US)	-
Fuel Tank - Usable Volume	-	-	475 gal (US)	-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)	-	-	149.8 in	-
Length with SU-Blade** - No rear attachment	-	-	345.1 in	-
Overall Length SU-Blade and SS Ripper**	-	-	421.7 in	-
Dimensions - D11
Ground Clearance*	-	-	31.4 in	-
Track Gauge	-	-	114 in	-
Width at Outside of Track (710 mm Track Shoe)	-	-	142 in	-
Height (ROPS/canopy)*	-	-	185.9 in	-
Length of Track on Ground	-	-	175 in	-
Length with SU-Blade** - No rear attachment	-	-	337.8 in	-
Overall Length SU-Blade and SS Ripper**	-	-	414.4 in	-
Note	-	-	*Includes grouser height for total dimensions on hard surfaces.	-
Ripper
Type	-	-	-	Parallelogram
Number of Shanks	-	-	-	3
Height	-	-	-	6.5 in
Weight	-	-	-	1222 lb
Maximum Digging Depth	-	-	-	13.3 in
Maximum Reach - Ground Line	-	-	-	30.2 in
Overall Width	-	-	-	67.3 in
Maximum Ground Clearance Under Tip	-	-	-	17.6 in
Dimensions
BLADE: Blade Width - LGP	-	-	-	126.7 in
Track Gauge - LGP, 762 mm (30 in)	-	-	-	73 in
BLADE: Digging Depth - LGP	-	-	-	23.2 in
Track Gauge - LGP	-	-	-	67.9 in
BLADE: Blade Capacity (SAE) - LGP	-	-	-	3.06 yd³
BLADE: Blade Width at Maximum Angle - LGP	-	-	-	115.8 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	-	-	-	52° to 58°
Ground Clearance - LGP, 762 mm (30 in)	-	-	-	13 in
BLADE: Blade Height - LGP	-	-	-	39.8 in
BLADE: Blade Lift Height - LGP	-	-	-	30.2 in
Ground Clearance - LGP	-	-	-	13 in
Overall Length - With Blade - LGP, 762 mm (30 in)	-	-	-	169.6 in
Overall Length - With Blade - LGP	-	-	-	169.6 in
Note	-	-	-	Abrasion Undercarriage
BLADE: Maximum Tilt - LGP	-	-	-	17.7 in
BLADE: Maximum Angle (either side) - LGP	-	-	-	25°
BLADE: Blade Capacity (SAE) - Standard	-	-	-	2.86 yd³
Track Gauge - Standard	-	-	-	63 in
BLADE: Digging Depth - Standard	-	-	-	23.8 in
BLADE: Blade Lift Height - Standard	-	-	-	30.2 in
Ground Clearance - Standard	-	-	-	13 in
Overall Length - With Blade - Standard	-	-	-	170.7 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	-	-	-	52° to 58°
BLADE: Blade Height - Standard	-	-	-	42.2 in
BLADE: Maximum Tilt - Standard	-	-	-	15.8 in
BLADE: Blade Width - Standard	-	-	-	109.5 in
BLADE: Blade Width at Maximum Angle - Standard	-	-	-	103.8 in
BLADE: Maximum Angle (either side) - Standard	-	-	-	25°
Length of Basic Dozer (without blade) - Standard	-	-	-	128.7 in
Dozer Height - Standard	-	-	-	109 in
Width of Dozer (standard shoes, no blade) - LGP	-	-	-	92.9 in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)	-	-	-	103.5 in
Length of Basic Dozer (without blade) - LGP	-	-	-	128.7 in
Dozer Height - LGP, 762 mm (30 in)	-	-	-	109 in
Width of Dozer (standard shoes, no blade) - Standard	-	-	-	83 in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)	-	-	-	128.7 in
Dozer Height - LGP	-	-	-	109 in
Cab
ROPS	-	-	-	ISO 3471:2008
FOPS	-	-	-	ISO 3449:2005 Level II
Retrieval Winch
Maximum Line Pull - Bare Drum	-	-	-	32150 lb
Control	-	-	-	Hydraulic
Rope Diameter - Optional	-	-	-	0.75 in
Drum Capacity - Optional Cable	-	-	-	195 ft
Maximum Line Speed - Full Drum	-	-	-	79 ft/min
Drum Capacity - Recommended Cable	-	-	-	277 ft
Winch Drive	-	-	-	Hydraulic
Weight	-	-	-	1747 lb
Maximum Line Pull - Full Drum	-	-	-	20350 lb
Rope Diameter - Recommended	-	-	-	0.63 in
Maximum Line Speed - Bare Drum	-	-	-	50 ft/min
Speed	-	-	-	Variable
Winch Length	-	-	-	35.63 in
Drum Diameter	-	-	-	8 in
Overall width	-	-	-	27.91 in
Drum Width	-	-	-	9.65 in
Throat Clearance	-	-	-	5.6 in
High Performance Winch
Winch length	-	-	-	27.76 in
Rope diameter – optional	-	-	-	0.75 in
Maximum line speed – bare drum	-	-	-	131 ft/min
Maximum line pull – bare drum	-	-	-	40000 lb
Weight	-	-	-	1345 lb
Drum capacity – optional	-	-	-	256 ft
Maximum line speed – full drum	-	-	-	207 ft/min
Rope diameter – recommended	-	-	-	0.63 in
Winch drive	-	-	-	Hydrostatic
Throat clearance	-	-	-	6.75 in
Drum diameter	-	-	-	10 in
Overall width	-	-	-	29.2 in
Drum width	-	-	-	10.8 in
Maximum line pull – full drum	-	-	-	25000 lb
Speed	-	-	-	Variable
Drum capacity – recommended cable	-	-	-	371 ft
Control	-	-	-	Hydraulic

Compare Equipment Go Back

D5 Dozer

D9 Dozer

D11 Dozer

D3 Track-Type Tractor

Engine

Weights

Transmission

Service Refill Capacities

VPAT

LGP VPAT

Fine Grading VPAT

Push Arm

Sustainability

Air Conditioning System

Engine - U.S. EPA Tier 2/3 Equivalent

Undercarriage

Standards

Steering and Brakes

Engine - U.S. EPA Tier 4 Final/EU Stage V

FLUID CAPACITIES

Hydraulic Controls

Blade - Semi-Universal

Blade - Universal

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions (Approximate)

Winches

Blades

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Dimensions - D11 Carrydozer

Dimensions - D11

Ripper

Dimensions

Cab

Retrieval Winch

High Performance Winch