Compare Equipment Go Back
 Cat EGP Switchgear |
 DE800S GC |
 Cat Switchgear |
|
Technical Summary |
|||
|---|---|---|---|
| Configuration | Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications | - | - |
| Modes of Operation | Multi-unit Island and multi-unit standby mode with optional redundant controls and components. | - | - |
| Application | LV and MV (208V - 38 kV) | - | - |
| Technical Summary | - | - | Modular system enables any configuration Distribution Boards, Motor Control Centers & PLC Control cabinets. Accommodates fixed or withdrawable breakers. |
Generator Protective Devices |
|||
| ANSI Protective Devices | 15/25, 27/59, 81 O/U, 32, 40, 50, 51 | - | - |
Environmental Parameters |
|||
| Certifications | IBC, CBC, UBC & OSHPD Certified | - | - |
| Control Panel Enclosure | NEMA 1 or NEMA 3R Freestanding Construction | - | - |
| Operating Temperature | 0°C to 50°C | - | - |
| Storage Temperature | -20°C to +60°C | - | - |
| Low Voltage Standards | NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 | - | - |
| Medium Voltage Standards | NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 | - | - |
Generator Set Specifications |
|||
| Minimum Rating | - | 800 eKW | - |
| Maximum Rating | - | 800 eKW | - |
| Emissions/Fuel Strategy | - | Low Fuel Consumption | - |
| Voltage | - | 380 - 480 Volts | - |
| Frequency | - | 60 Hz | - |
| Speed | - | 1800 rpm | - |
| Duty Cycle | - | Standby | - |
Engine Specifications |
|||
| Engine Model | - | C27 TA, V-12, 4-Stroke Water-Cooled Diesel | - |
| Bore | - | 5.4 in | - |
| Stroke | - | 6 in | - |
| Displacement | - | 1649.47 in³ | - |
| Compression Ratio | - | 16.5:1 | - |
| Aspiration | - | TA | - |
| Fuel System | - | MEUI | - |
| Governor Type | - | Adem™A4 | - |
Generator Set Dimensions |
|||
| Length - Minimum | - | 164.3 in | - |
| Length - Maximum | - | 164.3 in | - |
| Width - Minimum | - | 73.1 in | - |
| Width - Maximum | - | 73.1 in | - |
| Height - Minimum | - | 87.3 in | - |
| Height - Maximum | - | 87.3 in | - |
| Dry Weight - Genset (minimum) | - | 13695 lb | - |
| Dry Weight - Genset (maximum) | - | 13695 lb | - |
Enclosure Rating |
|||
| Configuration | - | - | IP4X |
Operating Temperature |
|||
| Operating Temperature | - | - | 35 °C / 40 °C @ 1 hr, option for 0…50 °C (32…122 °F) |
Dimensions |
|||
| Standard Widths | - | - | 600 mm for ABB Emax2 E2 1600 - 2500A. 750 mm for ABB Emax2 E4 3200 - 4000A. 1200 mm for ABB Emax2 E6 4000 - 6300A. |
| Standard Heights | - | - | Heights include 100mm plinth with fork lift pockets, 1900 mm up to 3200A, 2200 mm for 400,2200 mm for PLC and control cabinets. Option for single point lifting on 4 corners with M10 swivel eyes. Standard sizes for shipping |
| Standard Depths | - | - | 300, 450 & 750mm for controls and PLC cabinets. 900mm for fixed breakers. 1050mm for withdrawable breakers |
Application |
|||
| Application | - | - | LV 380…480 VAC, 50 Hz, 3-Phase. |
Modes of Operation |
|||
| Modes of Operation | - | - | Switchgear integration options for multi generator and utility synchronising, load sharing, Peak Lopping/Shaving, AMF, Changeover, Load bank connection, Protection relay etc. |
Add a Similar Product:
-
Cat Customizable Switchgear and Controls Add
-
Cat XLM Switchgear Add
-
Engine Paralleling and Integration Control (EPIC) Add
-
EMCP 4.4 Master Control Panel Add
-
Energy Capacity Expansion (ECE) module Add
-
Cat® BDP1000 Bi-Directional Power Inverter Add
-
Energy Time Shift (ETS) Module Add
-
XQ570 Tier 4 Final – 455 ekW (568 kVA) Add
-
Temporary Connection Boxes Add
-
XQP550 EU Stage V Add