Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
-
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,200 rpm. Advert
-
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100
-
Weights
Operating Weight
85310 lb
64370 lb
-
Note
Operating weight includes full fuel tank, 75 kg (165 lb) operator, grapple 2000 kg (4,410 lb) and single tires. Weight varies depending on configuration.
Operating weight includes full fuel tank, operator, 1400 kg (3,086 lb) work tool. Weight varies depending on configuration.
-
Working Ranges
Maximum Reach
50.8 ft
42.7 ft
-
Boom
MH 9.3 m (30'6")
MH 7.5 m (24'7")
-
Stick
Industrial 7.1 m (23'3")
6.0 m (19'8") Drop Nose
-
Maximum Height
57.4 ft
46.8 ft
-
Minimum Dump Height
17.9 ft
12.5 ft
-
Maximum Depth
17.3 ft
9.7 ft
-
Boom Pin Height
40 ft
30.5 ft
-
Transmission
Maximum Travel Speed
11.2 mile/h
12.4 mile/h
-
Drawbar Pull
34621 lbf
28551 lbf
-
Maximum Gradeability
44%
52%
-
Hydraulic System
Maximum Pressure - Implements
5076 psi
5076 psi
-
Maximum Pressure - Swing
4061 psi
5656 psi
-
Maximum Pressure - Travel
5076 psi
5076 psi
-
Swing Mechanism
Swing Speed
7 r/min
8 r/min
-
Maximum Swing Torque
60628 lbf·ft
51800 lbf·ft
-
Service Refill Capacities
Fuel Tank Capacity
125.2 gal (US)
109.9 gal (US)
-
Cooling System
6.6 gal (US)
10.6 gal (US)
-
Engine Oil
6.6 gal (US)
5.3 gal (US)
-
Rear Axle - Housing (Differential)
9 gal (US)
3.7 gal (US)
-
Final Drive
2 gal (US)
-
-
Powershift Transmission
0.8 gal (US)
0.7 gal (US)
-
Hydraulic System - Including Tank
86.9 gal (US)
91.1 gal (US)
-
Hydraulic Tank
38.8 gal (US)
55.2 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
10.8 gal (US)
7.9 gal (US)
-
Final Drive - Each
-
0.7 gal (US)
-
Dimensions
Boom
MH 9.3 m (30'6")
MH 7.5 m (24'7")
-
Stick
Industrial 7.1 m (23'3")
6.0 m (19'8") Drop Nose
-
Shipping Length
42 ft
35.1 ft
-
Machine Length
20.8 ft
17.9 ft
-
Tail Swing Radius
10.3 ft
9.2 ft
-
Counterweight Clearance
5.7 ft
4.3 ft
-
Cab Height- Lowered
12 ft
11 ft
-
Cab Height-Lowered with OPG
12.5 ft
11.1 ft
-
Cab Height-Raised
20.5 ft
18.9 ft
-
Cab Height-Raised with OPG
21 ft
18.9 ft
-
Wheel Base
10.5 ft
9 ft
-
Shipping Width
9.8 ft
9.8 ft
-
Ground Clearance
0.9 ft
0.8 ft
-
Undercarriage Length
20.4 ft
17.4 ft
-
Air Conditioning System
Note (1)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta
