Compare Equipment Go Back

MH3040 Wheel Material Handler

Engine

Engine Model Cat® C7.1 - -
Net Power - ISO 9249 202 hp - -
Net Power - ISO 9249 (DIN) 205 hp (metric) - -
Engine Power - Maximum - ISO 14396 201 hp - -
Engine Power - ISO 14396 (DIN) 204 hp (metric) - -
Bore 4 in - -
Stroke 5 in - -
Displacement 428 in³ - -
Biodiesel Capability Up to B20¹ - -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. - -
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time - -
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100 - -

Weights

Operating Weight 85310 lb - -
Note Operating weight includes full fuel tank, 75 kg (165 lb) operator, grapple 2000 kg (4,410 lb) and single tires. Weight varies depending on configuration. - -

Working Ranges

Maximum Reach 50.8 ft - -
Boom MH 9.3 m (30'6") - -
Stick Industrial 7.1 m (23'3") - -
Maximum Height 57.4 ft - -
Minimum Dump Height 17.9 ft - -
Maximum Depth 17.3 ft - -
Boom Pin Height 40 ft - -

Transmission

Maximum Travel Speed 11.2 mile/h - -
Drawbar Pull 34621 lbf - -
Maximum Gradeability 44% - -

Hydraulic System

Maximum Pressure - Implements 5076 psi - -
Maximum Pressure - Swing 4061 psi - -
Maximum Pressure - Travel 5076 psi - -

Swing Mechanism

Swing Speed 7 r/min - -
Maximum Swing Torque 60628 lbf·ft - -

Service Refill Capacities

Fuel Tank Capacity 125.2 gal (US) - -
Cooling System 6.6 gal (US) - -
Engine Oil 6.6 gal (US) - -
Rear Axle - Housing (Differential) 9 gal (US) - -
Final Drive 2 gal (US) - -
Powershift Transmission 0.8 gal (US) - -
Hydraulic System - Including Tank 86.9 gal (US) - -
Hydraulic Tank 38.8 gal (US) - -
Diesel Exhaust Fluid (DEF) Tank 10.8 gal (US) - -

Dimensions

Boom MH 9.3 m (30'6") - -
Stick Industrial 7.1 m (23'3") - -
Shipping Length 42 ft - -
Machine Length 20.8 ft - -
Tail Swing Radius 10.3 ft - -
Counterweight Clearance 5.7 ft - -
Cab Height- Lowered 12 ft - -
Cab Height-Lowered with OPG 12.5 ft - -
Cab Height-Raised 20.5 ft - -
Cab Height-Raised with OPG 21 ft - -
Wheel Base 10.5 ft - -
Shipping Width 9.8 ft - -
Ground Clearance 0.9 ft - -
Undercarriage Length 20.4 ft - -

Air Conditioning System

Note (1) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta - -

Sustainability

Recyclability 95% - -
Add a Similar Product:
  • MH3026 Wheel Material Handler Add
  • MH3022 Wheel Material Handler Add
  • MH3024 Wheel Material Handler Add
  • MH3250 Track Material Handler Add
  • MH3260 Track Material Handler Add