CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    834 Wheel Dozer
    View Product
    D10 Dozer
    View Product Remove
    D11 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C18  - -
    Net Power - SAE J1349:2011 496 hp - -
    Rated Speed 1900 r/min - -
    Peak Power Speed 1500 r/min - -
    Gross Power - SAE J1995:2014 562 hp - -
    Bore 5.7 in - -
    Stroke 7.2 in - -
    Displacement 1105 in³ - -
    Peak Torque - 1,300 rpm 2092 lb/ft - -
    Torque Rise 52 % - -
    Note (1) Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - -
    Note (2) The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3. - -

    Operating Specifications
    Operating Weight 105271 lb - -
    Blade Capacities 7.9 – 22.2 m3 (10.3 – 29.0 yd3) - -

    Transmission
    Transmission Type Cat planetary power shift - -
    Forward - 1 4.2 mile/h - -
    Forward - 2 7.2 mile/h - -
    Forward - 3 12.6 mile/h - -
    Forward - 4 22 mile/h - -
    Reverse - 1 4.2 mile/h - -
    Reverse - 2 7.6 mile/h - -
    Reverse - 3 13.3 mile/h - -
    Direct Drive - Forward 1 Lock-up disabled - -
    Direct Drive - Forward 2 7.7 mile/h - -
    Direct Drive - Forward 3 13.7 mile/h - -
    Direct Drive - Forward 4 23.9 mile/h - -
    Direct Drive - Reverse 1 4.5 mile/h - -
    Direct Drive - Reverse 2 8.1 mile/h - -
    Direct Drive - Reverse 3 14.3 mile/h - -
    Note Travel speeds based on 35/65-R33 tire - -
    1.0 Forward - 2.5 mile/h 2.5 mile/h
    1.5 Forward - 3.4 mile/h -
    2.0 Forward - 4.5 mile/h 4.4 mile/h
    2.5 Forward - 6 mile/h -
    3.0 Forward - 7.8 mile/h 7.6 mile/h
    1.0 Reverse - 3.2 mile/h 3 mile/h
    1.5 Reverse - 4.2 mile/h -
    2.0 Reverse - 5.6 mile/h 5.3 mile/h
    2.5 Reverse - 7.5 mile/h -
    3.0 Reverse - 9.8 mile/h 9.1 mile/h
    Transmission Clutch Diameter - 17 in -
    Type - Planetary powershift -
    Drawbar Pull - 3 Forward - - 46250 ft·lbf
    Drawbar Pull - 1 Forward - - 148200 ft·lbf
    Drawbar Pull - 2 Forward - - 82300 ft·lbf

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH - -
    Lift/Tilt System Variable displacement piston - -
    Maximum Flow at 1,900 rpm 153 gal/min - -
    Relief Valve Setting - Lift/Tilt 4641 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke 139.75 mm × 1021 mm (5.5 in × 40.2 in) - -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in) - -
    Pilot System Variable displacement piston - -
    Pilot Maximum Flow 13.7 gal/min - -
    Pilot Relief Valve Setting 580 psi - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - -
    Steering System - Pump Piston, variable displacement - -
    Maximum Flow 65.8 gal/min - -
    Relief Valve Setting - Steering 3495 psi - -
    Total Steering Angle 86 ° - -
    Steering Cycle Times - High Idle 3.1 s - -
    Steering Cycle Times - Low Idle 5.7 s - -

    Service Refill Capacities
    Fuel Tank 209.5 gal (US) - -
    Cooling System 31.7 gal (US) - 46.8 gal (US)
    Crankcase 15.9 gal (US) - -
    Diesel Exhaust Fluid Tank 8.7 gal (US) - -
    Transmission 31.7 gal (US) - -
    Hydraulic System Factory Fill 63.4 gal (US) - -
    Differential - Final Drives - Front 49.1 gal (US) - -
    Differential - Final Drives - Rear 49.1 gal (US) - -
    Hydraulic System - Tank Only 37 gal (US) - -
    Note (1) All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este - -
    Cooling System Refill - Tier 2 Equivalent Engine - - 41.7 gal (US)
    Engine Crankcase - - 35.1 gal (US)
    Power Train - - 120 gal (US)
    Power Train - Refill Volume - - 103.3 gal (US)
    Final Drive - Each - - 12.4 gal (US)
    Roller Frames - Each - - 24.8 gal (US)
    Hydraulic Tank - - 42.2 gal (US)
    Hydraulic System Tank and Chassis - - 64.7 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Standard) - - 117.6 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - - 143.4 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. -
    Note (1) - - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

    Axles
    Front Fixed - -
    Rear Trunnion - -
    Oscillation Angle ±13° - -

    Brakes
    Brakes ISO 3450: 2011 - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)** 109 dB(A) - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Dimensions
    Height - Top of Exhaust Stack 15.9 ft - -
    Height - Top of Air Cleaner 12.8 ft - -
    Height - Top of Hood 10.9 ft - -
    Ground Clearance - Bumper 3.1 ft - -
    Centerline of Rear Axle to Edge of Bumper 10.5 ft - -
    Wheel Base 14.9 ft - -
    Length - Front of Tire 28.4 ft - -
    Length - Straight Blade on Ground 32.6 ft - -
    Length - Universal Blade on Ground 34.4 ft - -
    Centerline of Front Axle to Hitch 7.5 ft - -
    Ground Clearance 1.7 ft - -
    Height - Top of Cab 13.7 ft - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C27 Cat® C32
    Engine Power - Net SAE J1349/ISO 9249** - Forward - 602 hp -
    Engine Power - Gross SAE J1995* - Forward - 631 hp -
    Engine Power - Gross SAE J1995* - Reverse - 801 hp -
    Engine Power - ISO 14396* - Forward - 620 hp -
    Engine Power - ISO 14396* - Reverse - 789 hp -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - 756 hp -
    Displacement - 1648 in³ 1959 in³
    Stroke - 6 in -
    Bore - 5.4 in -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Note (1) - *Excludes all fan losses. *Excludes all fan losses.
    Note (2) - All Engine ratings apply at 1,800 rpm. Engine ratings apply at 1,800 rpm.
    Note (3) - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
    Note (4) - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 hp
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 955 hp

    Weights
    Operating Weight - 154888 lb 235507 lb
    Shipping Weight - 111739 lb -
    Note (1) - D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
    Note (2) - D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
    Operating Weight - Carrydozer - - 250665 lb

    Undercarriage
    Shoe Type - Extreme Service (ES) Extreme Service
    Width - Shoe - 24 in 28 in
    Shoes/Side - 44 41
    Grouser Height - 3.7 in 4 in
    Pitch - 10.2 in 12.5 in
    Ground Clearance - 28.5 in -
    Track Gauge - 100.4 in 114 in
    Length - Track on Ground - 152.8 in 175 in
    Ground Contact Area - 7347 in² 9781 in²
    Track Rollers/Side - 8 8
    Number of Carrier Rollers - 1 per side (optional) 1 per side (optional)
    Width - Shoe - CD - - 36 in
    Ground Clearance* - - 30.6 in
    Ground Contact Area - CD - - 12605 in²

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
    FOPS - Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
    Sound - Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) -
    Note - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and -
    Sound (1) - Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
    Note (1) - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. -
    Note (2) - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. -
    Note (3) - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). -
    Sound (2) - - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).

    Steering and Brakes
    Steering Type - Hydraulically Applied Multiple-Disc Steering Clutch -
    Brake Type - Spring Applied Multiple- Disc Brake -
    Brake Diameter - 15.4 in -
    Brake Count - 10 -

    Blades
    10SU ABR - Capacity (SAE J1265) - 24.2 yd³ -
    10SU ABR - Width (over end bits) - 194.5 in -
    10SU ABR - Height - 83.5 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - 19.98 in -
    10SU ABR - Digging Depth - Blade Pitch: Nominal - 25.23 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - 30.08 in³ -
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - 66.14 in -
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - 53.86 in -
    10SU ABR - Ground Clearance - Maximum Tilt LH - 56.3 in -
    10SU ABR - Ground Clearance - Maximum Tilt RH - 56.3 in -
    10U ABR - Capacity (SAE J1265) - 28.7 yd³ -
    10U ABR - Width (over end bits) - 207.1 in -
    10U ABR - Height - 83.5 in -
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - 19.98 in -
    10U ABR - Digging Depth - Blade Pitch: Nominal - 60 in -
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - 30.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - 66.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - 53.9 in -
    10U ABR - Ground Clearance - Maximum Tilt LH - 60.8 in -
    10U ABR - Ground Clearance - Maximum Tilt RH - 60.8 in -
    10U ABR - Weights - Blade Weight* - 23585 lb -
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - 154888 lb -
    Note (1) - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees -
    Note (2) - *Does not include hydraulic controls but includes blade cylinders, pusharms. -
    Note (3) - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. -
    Semi-Universal (SU)* Capacity - - 35.6 yd³
    Semi-Universal (SU)* Width Over Endbits - - 219.8 in
    U-Blade Capacity - - 45 yd³
    U-Blade Width - - 249.6 in
    Reclamation Universal - Blade capacity (SAE J1265) - - 55 yd³
    Reclamation Universal - Width with blade (over end bits) - - 251.8 in
    Carry Dozer - Blade capacity (SAE J1265) - - 57 yd³
    Carry Dozer - Width with blade (over end bits) - - 263.9 in

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 49233 lbf 66000 lb
    Maximum penetration depth (standard tip) - 59.2 in 63.5 in
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 36 in -
    Weight - 14209 lb -
    Note - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -
    Pryout Force - - 148510 lb

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 53055 lbf 66110 lb
    Maximum penetration depth (standard tip) - 78.3 in 85.5 in
    Weight - 14548 lb -
    Note - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -
    Pryout Force - - 148510 lb

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C27 Cat® C32
    Engine Power - Net SAE J1349/ISO 9249** - Forward - 603 hp -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - 722 hp -
    Engine Power - Gross SAE J1995* - Forward - 631 hp -
    Engine Power - Gross SAE J1995* - Reverse - 766 hp -
    Engine Power - ISO 14396* - Forward - 622 hp -
    Engine Power - ISO 14396* - Reverse - 756 hp -
    Displacement - 1648 in³ 1959 in³
    Bore - 5.4 in -
    Stroke - 6 in -
    Emissions - U.S. EPA Tier 2 Equivalent -
    Note (1) - *Excludes all fan losses. *Excludes all fan losses.
    Note (2) - All Engine ratings apply at 1,800 rpm. Engine ratings apply at 1,800 rpm.
    Note (3) - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
    Note (4) - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 hp
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 957 hp

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - 323.3 gal (US) 475 gal (US)
    Fuel Tank - Total Volume - 335.2 gal (US) 500 gal (US)

    Hydraulic Controls
    Pump Type - Variable displacement piston Variable displacement piston pump
    Pump Output - Implement - 112 gal/min -
    Note (1) - Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). -
    Fan Pump - 21.7 gal/min -
    Note (2) - Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). -
    Tilt Cylinder Flow - Rod End Flow - 112 gal/min -
    Tilt Cylinder Flow - Head End Flow - 63.4 gal/min -
    Lift Cylinder Relief Valve Setting - 4061.1 psi -
    Tilt Cylinder Relief Valve Setting - 3872.5 psi -
    Ripper - Lift - Relief Valve Setting - 4061.1 psi -
    Ripper - Pitch - Relief Valve Setting - 4061.1 psi -
    Tank Capacity - 32.2 gal (US) -
    Cylinder Sizing - Blade Lift - Bore - 5.5 in -
    Cylinder Sizing - Blade Tilt - Bore - 8.3 in -
    Cylinder Sizing - Ripper Shank Lift - Bore - 8.3 in -
    Cylinder Sizing - Ripper Shank Angle - Bore - 7.1 in -
    Cylinder Sizing - Blade Lift - Stroke - 65.1 in -
    Cylinder Sizing - Blade Tilt - Stroke - 9.5 in -
    Cylinder Sizing - Ripper Shank Lift - Stroke - 21.1 in -
    Cylinder Sizing - Ripper Shank Angle - Stroke - 26 in -
    Note (3) - Electro-hydraulic pilot valves assist operations of ripper and dozer controls. -
    Combined Pump Output - Implement - - 177 gal/min

    Dimensions (Approximate)
    Ground Clearance* - 28.5 in -
    Track Gauge - 100.4 in -
    Width - Without Trunnions - 610 mm/24 in ES - 130.4 in -
    Width - Over Trunnions - 148 in -
    Height - FOPS Cab* - 162.8 in -
    Height - Top of Stack* - 171.5 in -
    Height - ROPS/Canopy* - 173.5 in -
    Note (1) - *Includes grouser height for total dimensions on hard surfaces. -
    Length - Track on Ground - 152.8 in -
    Overall Length - Basic Tractor - 209.6 in -
    Length - With SU-Blade - 292 in -
    Length - With U-Blade - 305.1 in -
    Length - With Single-Shank Ripper - 278.8 in -
    Length - With Multi-Shank Ripper - 285.1 in -
    Overall Length - SU-Blade/SS Ripper - 360.6 in -

    FLUID CAPACITIES
    Cooling System Refill – Tier 4 Final Engine - 46.2 gal (US) -
    Engine Crankcase Sump - 27.2 gal (US) -
    Power Train - Total Volume - 81.4 gal (US) -
    Power Train - Refill Volume - 74.8 gal (US) -
    Final Drives (each) - 12.2 gal (US) -
    Track Roller Frames (each) - 16.9 gal (US) -
    Pivot Shaft Oil - 9.5 gal (US) -
    Hydraulic System Tank - 32.2 gal (US) -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - - 131.1 in
    Maximum Penetration Force - Shank Vertical - - 77350 lb
    Maximum Penetration - Standard Tip - - 43.3 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 145640 lb

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - - 149.8 in
    Length with SU-Blade** - No rear attachment - - 345.1 in
    Overall Length SU-Blade and SS Ripper** - - 421.7 in

    Dimensions - D11
    Ground Clearance* - - 31.4 in
    Track Gauge - - 114 in
    Width at Outside of Track (710 mm Track Shoe) - - 142 in
    Height (ROPS/canopy)* - - 185.9 in
    Length of Track on Ground - - 175 in
    Length with SU-Blade** - No rear attachment - - 337.8 in
    Overall Length SU-Blade and SS Ripper** - - 414.4 in
    Note - - *Includes grouser height for total dimensions on hard surfaces.
    Add a Similar Product: