Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
-
-
Peak Power Speed
-
1600
-
Net Power - SAE J1349:2011
-
373 hp
-
Rated Speed - 2,000 rpm - EEC 80/1269
-
373 hp
-
Rated Speed - 2,000 rpm - ISO 9249
-
373 hp
-
Peak Torque (1,200 rpm) - SAE J1995:2014
-
1778 lb/ft
-
Note (1)
-
Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
-
Note (2)
-
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
-
Operating Specifications
Operating Weight - Standard
178517 lb
97785 lb
-
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
5.0-10.3 m³ (6.5-13.5 yd³)
-
Rated Payload - Standard
17.5 ton (US)
-
-
Rated Payload - High Lift
17.5 ton (US)
-
-
Cat Truck Match - Standard
773-775
770/735/740/745
-
Cat Truck Match - High Lift
775-777
772/773
-
Operating Weight - High Lift
-
104005 lb
-
Rated Payload - Standard (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (Standard)
-
14 ton (US)
-
Rated Payload - High Lift (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (High Lift)
-
12.1 ton (US)
-
Transmission
Transmission Type
Cat planetary power shift
Cat planetary power shift
-
Forward - 1
4.6 mile/h
5 mile/h
-
Forward - 2
8.2 mile/h
8 mile/h
-
Forward - 3
14.5 mile/h
-
-
Reverse - 1
5.1 mile/h
5 mile/h
-
Reverse - 2
9.1 mile/h
8 mile/h
-
Reverse - 3
16 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8.2 mile/h
8 mile/h
-
Direct Drive - Forward 3
14.5 mile/h
14 mile/h
-
Direct Drive - Reverse 1
5.1 mile/h
-
-
Direct Drive - Reverse 2
9.1 mile/h
9 mile/h
-
Direct Drive - Reverse 3
16 mile/h
16 mile/h
-
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
-
-
Direct Drive - Forward 4
-
24 mile/h
-
Direct Drive - Reverse 4
-
25.4 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive flow control
Load Sense
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 1,800 rpm
240 gpm
-
-
Relief Valve Setting - Lift/Tilt
4786 psi
4050 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
-
-
Pilot System
Open loop and pressure reducing
-
-
Pilot Relief Setting
507 psi
-
-
Lift/Tilt System - Pump
-
2 × 110 cc variable displacement
-
Maximum Flow at 2,165 rpm
-
123 gpm
-
Lift Cylinder - Bore
-
7.5 in
-
Lift Cylinder - Stroke
-
45 in
-
Tilt Cylinder - Bore
-
6.7 in
-
Tilt Cylinder - Stroke
-
28.4 in
-
Hydraulic Cycle Times
Rack Back
4.3 s
4.5 s
-
Raise
8.6 s
9 s
-
Dump
2.9 s
3.5 s
-
Lower
3.7 s
5.2 s
-
Lower Float Down
3.7 s
4.3 s
-
Total Hydraulic Cycle Time - Empty Bucket
13.8 s
-
-
Total Hydraulic Cycle Time
-
21.3 s
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Load Sense
-
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
-
Maximum Flow at 1,400 rpm
96.2 gpm
52 gpm
-
Relief Valve Setting - Steering
5004 psi
-
-
Total Steering Angle
70°
70°
-
Steering Cut Off Pressure
-
4000 psi
-
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
8.5°
±12.5°
-
Oscillation Angle - Chain Arrangement
-
±8.5°
-
Brakes
Brakes
ISO 3450: 2011
ISO 3450:2011
-
Service Refill Capacities
Fuel Tank
281 gal (US)
141 gal (US)
-
Cooling System
54.9 gal (US)
-
-
Engine Crankcase
20 gal (US)
-
-
Transmission
29.1 gal (US)
20 gal (US)
-
Differential - Final Drives - Front
71.6 gal (US)
-
-
Differential - Final Drives - Rear
68.9 gal (US)
-
-
Hydraulic System Factory Fill
210 gal (US)
87 gal (US)
-
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US)
-
-
Hydraulic Tank - Steering and Braking
34.9 gal (US)
-
-
Note
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
-
-
Fuel Tank - Short Lift
-
127 gal (US)
-
Cooling Systems
-
26 gal (US)
-
Crankcase
-
9 gal (US)
-
Diesel Exhaust Fluid Tank
-
6 gal (US)
-
Axle Oil - Differentials and Final Drives - Front
-
49 gal (US)
-
Axle Oil - Differentials and Final Drives - Rear
-
45 gal (US)
-
Hydraulic System - Tank Only
-
34 gal (US)
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
73 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
113 dB(A)
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
Machine Sound Power Level (ISO 6395:2008)**
-
110 dB(A)
-
Note (5)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
-
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
17.2 ft
13.5 ft
-
Ground to Top of Exhaust Stacks
16.6 ft
13.3 ft
-
Ground to Top of Hood
12.7 ft
10.7 ft
-
Ground to Bumper Clearance
3.5 ft
-
-
Rear Axle - Centerline to Bumper
12.5 ft
10.3 ft
-
Front Axle Centerline to Bucket Tip
15.4 ft
13.8 ft
-
Wheel Base
15.1 ft
12.5 ft
-
Maximum Overall Length
42.9 ft
36.6 ft
-
Ground to Lower Hitch Clearance
2 ft
1.5 ft
-
Ground to Center of Front Axle
4.2 ft
3.2 ft
-
Clearance at Maximum Lift
7.2 ft
10.1 ft
-
Rack Back Angle at Ground Level
40.4°
-
-
Rack Back Angle at Carry
48.8°
-
-
B-Pin Height - Maximum Lift
19.7 ft
16.1 ft
-
Maximum Overall Height - Bucket Raised
27.2 ft
22.4 ft
-
Rack Angle at Maximum Lift
63.7°
-
-
Dump Angle at Maximum Lift
45°
-
-
Reach - Maximum Lift
7.2 ft
7.1 ft
-
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
All dimensions are approximate.
Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
17.2 ft
13.5 ft
-
Ground to Top of Exhaust Stacks
16.6 ft
13.3 ft
-
Ground to Top of Hood
12.7 ft
10.7 ft
-
Ground to Bumper Clearance
3.5 ft
-
-
Rear Axle - Centerline to Bumper
12.5 ft
10.3 ft
-
Front Axle Centerline to Bucket Tip
17.8 ft
15.3 ft
-
Wheel Base
15.1 ft
12.5 ft
-
Maximum Overall Length
45.3 ft
38 ft
-
Ground to Lower Hitch Clearance
2 ft
1.5 ft
-
Ground to Center of Front Axle
4.2 ft
3.2 ft
-
Clearance at Maximum Lift
14.8 ft
11.6 ft
-
Rack Back Angle at Ground Level
39.9°
-
-
Rack Back Angle at Carry
49.3°
-
-
B-Pin Height - Maximum Lift
21.2 ft
17.6 ft
-
Maximum Overall Height - Bucket Raised
28.7 ft
23.9 ft
-
Rack Angle at Maximum Lift
60.6°
-
-
Dump Angle at Maximum Lift
51°
-
-
Reach - Maximum Lift
8.5 ft
7.4 ft
-
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
All dimensions are approximate.
Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
-
74 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
113 dB(A)
-
Operator Sound Pressure Level (ISO 6396:2008)*
-
73 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)**
-
110 dB(A)
-
Note (1)
-
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
Note (2)
-
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
Note (3)
-
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
Note (5)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
