Compare

Compare Equipment Go Back

Engine
	990 Wheel Loader View Product	988 XE Wheel Loader View Product Remove	992 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	950 GC Wheel Loader \| Front Loader View Product Remove
Engine Power - ISO 14396:2002	752 hp	580 hp	-	-	-
Engine Model	Cat® C27	Cat® C18	Cat® C32B	Cat C3.6	Cat C7.1
Emissions	Option 2 - Emits equivalent to U.S. EPA Tier 2	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	Engine meets Tier 4 Final/Stage V emission standards.	Tier 4/Stage V
Rated Speed	1800 r/min	1,700 rpm	1750 rpm	-	-
Gross Power - SAE J1995:2014	766 hp	588 hp	-	-	-
Net Power - SAE J1349:2011 - Standard Ambient	699 hp	-	-	-	-
Net Power - SAE J1349:2011 - High Ambient	648 hp	-	-	-	-
Bore	5.4 in	5.7 in	5.7 in	3.85 in	4.13 in
Stroke	6 in	7.2 in	6.4 in	4.72 in	5.31 in
Displacement	1649.5 in³	1105 in³	1963.5 in³	220 in³	428 in³
Peak Torque - 1,200 rpm	2624 lb/ft	2230 lbf·ft	-	-	-
Torque Rise	18 %	58%	-	-	-
Note	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
Peak Power Speed	-	1,500 rpm	-	-	-
Net Power - SAE J1349:2011	-	538 hp	-	-	-
Note (1)	-	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-	-
Note (2)	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	-
Net Power	-	-	814 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	900 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	937 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	907 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	944 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	884 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	921 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	893 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	931 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	814 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	814 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	823 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	823 hp	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	3514 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	3555 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	3537 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	3570 ft·lbf	-	-
Maximum Gross Power	-	-	-	121 hp	-
Rated Net Power - Rated Engine Speed	-	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	-	-	2200 r/min	-
Rated Net Power - SAE J1349	-	-	-	120 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	-	-	122 hp	-
Rated Net Power - ISO 9249	-	-	-	118 hp	-
Maximum Gross Torque - SAE J1995	-	-	-	372 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	-	-	369 ft·lbf	-
Maximum Net Torque - SAE J1349	-	-	-	366 ft·lbf	-
Maximum Net Torque - ISO 9249	-	-	-	363 ft·lbf	-
Maximum Gross Power - ISO 14396	-	-	-	121 hp	-
Net Power - ISO 9249	-	-	-	-	225 hp
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	-	-	-	228 hp
Maximum Power - 1,700 rpm - ISO 14396	-	-	-	-	240 hp
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	-	-	-	243 hp
Peak Gross Torque - 1,400 rpm - SAE J1995	-	-	-	-	811 ft·lbf
Peak Gross Torque - 1,400 rpm - ISO 14396	-	-	-	-	805 ft·lbf
Maximum Net Power - 1,700 rpm - ISO 9249	-	-	-	-	225 hp
Maximum Net Power - 1,700 rpm - SAE J1349	-	-	-	-	225 hp
Maximum Power - 1,700 rpm - SAE J1995	-	-	-	-	241 hp
Operating Specifications
Operating Weight - Standard	178517 lb	-	-	-	-
Bucket Capacity Range	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	4.7-13 m3 (6.2-17 yd3)	11.5-24.5 m³ (15-32 yd³)	-	-
Rated Payload - Standard	17.5 ton (US)	-	25.5 ton (US)	-	-
Rated Payload - High Lift	17.5 ton (US)	-	22.5 ton (US)	-	-
Cat Truck Match - Standard	773-775	-	775/777	-	-
Cat Truck Match - High Lift	775-777	-	785	-	-
Operating Weight	-	116362 lb	233430 lb	-	-
Rated Payload - Quarry Face	-	12.5 t	-	-	-
Rated Payload - Loose Material	-	16 t	-	-	-
Rated Payload - Standard (Material Handler)	-	-	30 ton (US)	-	-
Rated Payload - High Lift (Material Handler)	-	-	27 ton (US)	-	-
Transmission
Transmission Type	Cat planetary power shift	Cat switched reluctance electric drive	Cat Planetary Powershift	-	-
Forward - 1	4.6 mile/h	-	4.3 mile/h	-	4.5 mile/h
Forward - 2	8.2 mile/h	-	7.4 mile/h	-	8 mile/h
Forward - 3	14.5 mile/h	-	12.7 mile/h	-	14.2 mile/h
Reverse - 1	5.1 mile/h	-	4.7 mile/h	-	4.5 mile/h
Reverse - 2	9.1 mile/h	-	8.1 mile/h	-	8 mile/h
Reverse - 3	16 mile/h	-	13.9 mile/h	-	14.2 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	Disabled	-	-
Direct Drive - Forward 2	8.2 mile/h	-	8 mile/h	-	-
Direct Drive - Forward 3	14.5 mile/h	-	14 mile/h	-	-
Direct Drive - Reverse 1	5.1 mile/h	-	5 mile/h	-	-
Direct Drive - Reverse 2	9.1 mile/h	-	8.8 mile/h	-	-
Direct Drive - Reverse 3	16 mile/h	-	15.3 mile/h	-	-
Note	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
Forward 1 (virtual)	-	4.3 mile/h	-	-	-
Forward 2 (virtual)	-	7 mile/h	-	-	-
Forward 3 (virtual)	-	13.8 mile/h	-	-	-
Forward 4 (virtual)	-	20 mile/h	-	-	-
Reverse 1 (virtual)	-	4.3 mile/h	-	-	-
Reverse 2 (virtual)	-	7 mile/h	-	-	-
Reverse 3 (virtual)	-	17.5 mile/h	-	-	-
Forward and Reverse - Speed Range 3	-	-	-	25 mile/h	-
Forward and Reverse - Speed Range 2*	-	-	-	12.5 mile/h	-
Forward and Reverse - Speed Range 1*	-	-	-	6.3 mile/h	-
Forward - 4	-	-	-	-	22.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive flow control	EH-Positive Flow Control, Flow Sharing	Positive Flow Control	-	-
Lift/Tilt System	Variable displacement piston	-	-	-	-
Maximum Flow at 1,800 rpm	240 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4786 psi	4757 psi	5000 psi	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	235 mm × 1287 mm (9.3 in × 50.7 in)	-	-	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	292.1 mm × 820 mm (11.5 in × 32.3 in)	-	-	-	-
Pilot System	Open loop and pressure reducing	-	-	-	-
Pilot Relief Setting	507 psi	-	-	-	-
Lift/Tilt System - Pump	-	Variable displacement piston	Variable Displacement Piston	-	-
Maximum Flow at 1,400-1,600 rpm	-	153 gpm	-	-	-
Lift Cylinder - Bore	-	8.7 in	9.3 in	-	-
Lift Cylinder - Stroke	-	41.3 in	63.5 in	-	-
Tilt Cylinder - Bore	-	8.7 in	11.5 in	-	-
Tilt Cylinder - Stroke	-	27 in	41.5 in	-	-
Maximum Flow at 2,165 rpm	-	-	250 gpm	-	-
Hydraulic Cycle Times
Rack Back	4.3 s	4.5 s	2.3 s	-	-
Raise	8.6 s	8 s	9 s	-	-
Dump	2.9 s	2.2 s	2.6 s	-	-
Lower	3.7 s	-	-	-	-
Lower Float Down	3.7 s	3.5 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	13.8 s	-	-	-	-
Total Hydraulic Cycle Time	-	18.2 s	17.1 s	-	-
Rack Back - High Lift	-	-	2.3 s	-	-
Raise - High Lift	-	-	9 s	-	-
Dump - High Lift	-	-	2.6 s	-	-
Float Down	-	-	3.2 s	-	-
Float Down - High Lift	-	-	3.2 s	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, load sensing	Pilot, Load Sensing	-	-
Steering System - Pump	Piston, variable displacement	Piston, variable displacement	Piston, Variable Displacement	-	-
Maximum Flow at 1,400 rpm	96.2 gpm	-	-	-	-
Relief Valve Setting - Steering	5004 psi	-	-	-	-
Total Steering Angle	70°	86°	80°	-	-
Maximum Flow at 1,400-1,600 rpm	-	71.3 gpm	-	-	-
Steering Cut Off Pressure	-	4351 psi	4500 psi	-	-
Steering Cycle Times - High Idle	-	3.4 s	3.1 s	-	-
Steering Cycle Times - Low Idle	-	5.6 s	4.9 s	-	-
Maximum Flow at 1,400-1,850 rpm	-	-	70 gpm	-	-
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	-	-
Axles
Front	Fixed	Fixed	Fixed	Fixed; Locking differential (standard)	-
Rear	Trunnion	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	-
Oscillation Angle	8.5°	13°	±9°	-	-
Brakes
Brakes	ISO 3450: 2011	ISO 3450:2011	ISO 3450:2011	-	-
Service Refill Capacities
Fuel Tank	281 gal (US)	147 gal (US)	385.7 gal (US)	43.6 gal (US)	-
Cooling System	54.9 gal (US)	-	-	5.7 gal (US)	13.2 gal (US)
Engine Crankcase	20 gal (US)	16 gal (US)	-	2.6 gal (US)	-
Transmission	29.1 gal (US)	16 gal (US)	51.5 gal (US)	0.8 gal (US)	11.9 gal (US)
Differential - Final Drives - Front	71.6 gal (US)	49 gal (US)	96.4 gal (US)	-	10.6 gal (US)
Differential - Final Drives - Rear	68.9 gal (US)	49 gal (US)	96.4 gal (US)	-	10 gal (US)
Hydraulic System Factory Fill	210 gal (US)	-	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	68.9 gal (US)	-	-	-	-
Hydraulic Tank - Steering and Braking	34.9 gal (US)	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-
Cooling System - Jacket Water	-	30 gal (US)	-	-	-
Cooling Systems - Power Train	-	8 gal (US)	-	-	-
Diesel Exhaust Fluid Tank	-	8.7 gal (US)	-	-	-
Hydraulic System - Implement/Steering	-	126 gal (US)	-	-	-
Cooling Systems	-	-	59.4 gal (US)	-	-
Crankcase	-	-	31.7 gal (US)	-	4.8 gal (US)
Hydraulic System Factory Fill (Implement)	-	-	104.1 gal (US)	-	-
Hydraulic Tank - Implement	-	-	60.2 gal (US)	-	-
Hydraulic Factory Fill (Steering)	-	-	32.5 gal (US)	-	-
Hydraulic Tank (Steering Tank Only)	-	-	26.3 gal (US)	-	-
Axles - Rear	-	-	-	4.5 gal (US)	-
Hydraulic System - Including Tank	-	-	-	25.9 gal (US)	-
Hydraulic Tank	-	-	-	14.5 gal (US)	29.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	-	4.8 gal (US)	-
Axles - Front	-	-	-	4.5 gal (US)	-
DEF Tank	-	-	-	-	4.2 gal (US)
Fuel Tank Size	-	-	-	-	76.6 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	109 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	-	109 dB(A)	-	-	-
Note (5)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	-	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-	-
Ground to Top of Hood	12.7 ft	-	-	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	15.4 ft	-	-	-	-
Wheel Base	15.1 ft	-	-	-	-
Maximum Overall Length	42.9 ft	-	-	-	-
Ground to Lower Hitch Clearance	2 ft	-	-	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-	-
Clearance at Maximum Lift	7.2 ft	-	-	-	-
Rack Back Angle at Ground Level	40.4°	-	-	-	-
Rack Back Angle at Carry	48.8°	-	-	-	-
B-Pin Height - Maximum Lift	19.7 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	27.2 ft	-	-	-	-
Rack Angle at Maximum Lift	63.7°	-	-	-	-
Dump Angle at Maximum Lift	45°	-	-	-	-
Reach - Maximum Lift	7.2 ft	-	-	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-	-
Ground to Top of Hood	12.7 ft	-	-	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	17.8 ft	-	-	-	-
Wheel Base	15.1 ft	-	-	-	-
Maximum Overall Length	45.3 ft	-	-	-	-
Ground to Lower Hitch Clearance	2 ft	-	-	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-	-
Clearance at Maximum Lift	14.8 ft	-	-	-	-
Rack Back Angle at Ground Level	39.9°	-	-	-	-
Rack Back Angle at Carry	49.3°	-	-	-	-
B-Pin Height - Maximum Lift	21.2 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	28.7 ft	-	-	-	-
Rack Angle at Maximum Lift	60.6°	-	-	-	-
Dump Angle at Maximum Lift	51°	-	-	-	-
Reach - Maximum Lift	8.5 ft	-	-	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-	-
Operator's Cab
ROPS/FOPS	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	-	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	-	110 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	-	110 dB(A)	-	-	-
Note (1)	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	-
Note (2)	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	-
Note (3)	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (5)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	-	14.8 ft	-	-	-
Ground to Top of Hood	-	10.9 ft	-	-	-
Ground to Bumper Clearance	-	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	14 ft	-	-	-
Wheel Base	-	14.9 ft	-	-	-
Maximum Overall Length	-	39.3 ft	-	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-	-
Ground to Center of Axles	-	3.2 ft	-	-	-
Clearance at Maximum Lift	-	11.9 ft	-	-	-
B-Pin Height - Maximum Lift	-	18 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	24.5 ft	-	-	-
Reach - Maximum Lift	-	6.5 ft	-	-	-
Note	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	-	14.8 ft	-	-	-
Ground to Top of Hood	-	10.9 ft	-	-	-
Ground to Bumper Clearance	-	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	15.3 ft	-	-	-
Wheel Base	-	14.9 ft	-	-	-
Maximum Overall Length	-	40.7 ft	-	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-	-
Ground to Center of Axles	-	3.2 ft	-	-	-
Clearance at Maximum Lift	-	13.3 ft	-	-	-
B-Pin Height - Maximum Lift	-	19.3 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	25.8 ft	-	-	-
Reach - Maximum Lift	-	6.8 ft	-	-	-
Note	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	-	13.8 ft	-	-	-
Ground to Top of Hood	-	10.9 ft	-	-	-
Ground to Bumper Clearance	-	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-	-
Front Axle Centerline to Fork Tip	-	16.5 ft	-	-	-
Wheel Base	-	14.9 ft	-	-	-
Maximum Overall Length	-	41.9 ft	-	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-	-
Ground to Center of Front Axle	-	3.2 ft	-	-	-
Fork Height with Level Arms	-	8.1 ft	-	-	-
Fork Top Clamp Opening	-	13.1 ft	-	-	-
Fork Height at Maximum Lift	-	17.2 ft	-	-	-
Hinge Pin Height at Maximum Lift	-	16.1 ft	-	-	-
Dump Angle at Maximum Lift	-	-39.4 °	-	-	-
Buckets
Bucket Capacities	-	-	11.5-24.5 m³ (15-32 yd³)	1.3-3.5 m3 (1.7-4.6 yd3)	2.9-4.4 m³ (3.75-5.75 yd³)
Bucket Capacities - General Purpose	-	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	109.4 °F	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	131 °F	-	-
Sound Performance - Standard
Note	-	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-
Sound Performance - Suppression
Note	-	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	-	17 ft	-	-
Ground to Top of ROPS	-	-	18.3 ft	-	-
Ground to Top of Hood	-	-	13.1 ft	-	-
Ground to Center of Front Axle	-	-	4.3 ft	-	-
Ground to Bumper Clearance	-	-	3.8 ft	-	-
Ground to Lower Hitch Clearance	-	-	2.2 ft	-	-
Reach - Maximum Lift	-	-	8.2 ft	-	-
Clearance at Maximum Lift	-	-	15.2 ft	-	-
B-Pin Height - Maximum Lift	-	-	22.8 ft	-	-
Maximum Overall Height - Bucket Raised	-	-	30.8 ft	-	-
Rear Axle - Centerline to Bumper	-	-	13.5 ft	-	-
Tread Width	-	-	10.83 ft	-	-
Rack Back Angle - Maximum Lift	-	-	56.9 degrees	-	-
Dump Angle at Maximum Lift	-	-	-49.5 degrees	-	-
Rack Back Angle - Ground Level	-	-	40.2 degrees	-	-
Width - Over Tires - With Bulge	-	-	14.74 ft	-	-
Rack Back Angle - Carry	-	-	48.9 degrees	-	-
Wheel Base	-	-	19.3 ft	-	-
Maximum Overall Length	-	-	50.8 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	18 ft	-	-
Dimensions - High Lift - Approximate
Tread Width	-	-	10.83 ft	-	-
Rack Back Angle - Ground Level	-	-	42.5 degrees	-	-
Dump Angle at Maximum Lift	-	-	-48.1 degrees	-	-
Rack Back Angle - Maximum Lift	-	-	56.2 degrees	-	-
Width - Over Tires - With Bulge	-	-	14.75 ft	-	-
Rack Back Angle - Carry	-	-	51.6 degrees	-	-
Ground to Top of Exhaust Stacks	-	-	17 ft	-	-
Ground to Top of ROPS	-	-	18.3 ft	-	-
Ground to Top of Hood	-	-	13.1 ft	-	-
Ground to Center of Front Axle	-	-	4.3 ft	-	-
Ground to Bumper Clearance	-	-	3.8 ft	-	-
Ground to Lower Hitch Clearance	-	-	2.2 ft	-	-
Reach - Maximum Lift	-	-	7.6 ft	-	-
Clearance at Maximum Lift	-	-	17.2 ft	-	-
B-Pin Height - Maximum Lift	-	-	24.5 ft	-	-
Maximum Overall Height - Bucket Raised	-	-	32 ft	-	-
Rear Axle - Centerline to Bumper	-	-	13.5 ft	-	-
Wheel Base	-	-	19.3 ft	-	-
Maximum Overall Length	-	-	51.6 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	18.8 ft	-	-
Weights
Operating Weight	-	-	-	21742 lb	41554 lb
Sustainability
Recyclability	-	-	-	95%	-
Cab
ROPS	-	-	-	ISO 3471:2008	-
FOPS	-	-	-	ISO 3449:2005	-
Note (3)	-	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (2)	-	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (1)	-	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Note (4)	-	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	-	43.6 gpm	-
Relief Pressure - Tilt Cylinder	-	-	-	4641 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	25 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	4641 psi	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	-	2.7 s	-
Note	-	-	-	All cycle times listed are with cylinder snubbing turned off.	-
Maximum Working Pressure - Implement Pump	-	-	-	4061 psi	-
Hydraulic Cycle Time - Total Cycle Time	-	-	-	11.5 s	-
Hydraulic Cycle Time - Rackback	-	-	-	2.2 s	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	-	1.8 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	-	4.8 s	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	40 gpm	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	25 gpm	-
Steering
Maximum Working Pressure - Steering Pump	-	-	-	3190 psi	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	-	2.3 s	-
Steering Articulation Angle - Each Direction	-	-	-	40 °	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	-	3.4 turns	-
Maximum Flow - Steering Pump	-	-	-	21.7 gpm	-
Tires
Other Choices Include	-	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-
Standard Size	-	-	-	17.5 R25 L2 XTLA	-
Note (1)	-	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Note (3)	-	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	-	-	-	76 dB(A)*
Note (1)	-	-	-	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	-	-	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	-	-	-	73 dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	-	-	-	For machines in European Union countries and in countries that adopt the EU Directives
With Cooling Fan Speed at Maximum Value - Note	-	-	-	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	-	-	-	107 LWA***
Note (3)	-	-	-	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
Note (2)	-	-	-	-	**For machines in European Union countries and in countries that adopt the "EU Directives."
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	-	73 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	-	-	-	109 dB(A)
Dimensions
Rack Back - Ground	-	-	-	-	40 degrees
Height - Top of Exhaust Pipe	-	-	-	-	11.17 ft
Centerline of Rear Axle to Hitch	-	-	-	-	5.42 ft
Lift Arm Clearance	-	-	-	-	12 ft
B-Pin Height	-	-	-	-	13.75 ft
Centerline of Rear Axle to Edge of Counterweight	-	-	-	-	6.75 ft
Ground Clearance	-	-	-	-	1.5 ft
Rack Back - Maximum Lift	-	-	-	-	60 degrees
Height - Top of Hood	-	-	-	-	8.75 ft
Wheel Base	-	-	-	-	10.83 ft
Height - Top of ROPS	-	-	-	-	11.33 ft
Rack Back - Carry	-	-	-	-	45 degrees
Note	-	-	-	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
Weights and Operating Specifications
Note (2)	-	-	-	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Tipping Load - Full Turn - Rigid Tires**	-	-	-	-	25875 lb
Breakout Force	-	-	-	-	34638 lbf
Tipping Load - Full Turn - ISO 14397-1*	-	-	-	-	24264 lb
Note (3)	-	-	-	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Operating Weight	-	-	-	-	41554 lb
Note (1)	-	-	-	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	-	-	-	9.4 s
Steering System - Pump Type	-	-	-	-	Piston
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	-	-	-	4047 psi
Implement System - Maximum Pump Output at 2,390 rpm	-	-	-	-	68 gpm
Engine - Tier 4 Final/Stage IV
Emissions	-	-	-	-	Tier 4/Stage IV

Compare Equipment Go Back

990 Wheel Loader

988 XE Wheel Loader

992 Wheel Loader

920 Compact Wheel Loader

950 GC Wheel Loader | Front Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Operator's Cab

Sound Performance - Tier 3 / Stage IIIA

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Buckets

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV