Compare

Compare Equipment Go Back

Engine
	990 Wheel Loader View Product	988 XE Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	992 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	752 hp	580 hp	-	-	-
Engine Model	Cat® C27	Cat® C18	Cat C3.6	Cat® 3516E	Cat® C32B
Emissions	Option 2 - Emits equivalent to U.S. EPA Tier 2	-	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Rated Speed	1800 r/min	1,700 rpm	-	-	1750 rpm
Gross Power - SAE J1995:2014	766 hp	588 hp	-	1870 hp	-
Net Power - SAE J1349:2011 - Standard Ambient	699 hp	-	-	-	-
Net Power - SAE J1349:2011 - High Ambient	648 hp	-	-	-	-
Bore	5.4 in	5.7 in	3.85 in	6.7 in	5.7 in
Stroke	6 in	7.2 in	4.72 in	8.5 in	6.4 in
Displacement	1649.5 in³	1105 in³	220 in³	4766 in³	1963.5 in³
Peak Torque - 1,200 rpm	2624 lb/ft	2230 lbf·ft	-	-	-
Torque Rise	18 %	58%	-	39%	-
Note	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	-
Peak Power Speed	-	1,500 rpm	-	-	-
Net Power - SAE J1349:2011	-	538 hp	-	-	-
Note (1)	-	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	The power ratings apply when tested under the reference conditions for the specified standard.	-
Note (2)	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-
Maximum Gross Power	-	-	121 hp	-	-
Rated Net Power - Rated Engine Speed	-	-	2200 r/min	-	-
Maximum Gross Power - Rated Engine Speed	-	-	2200 r/min	-	-
Rated Net Power - SAE J1349	-	-	120 hp	-	-
Maximum Gross Power - ISO 14396 (metric)	-	-	122 hp	-	-
Rated Net Power - ISO 9249	-	-	118 hp	-	-
Maximum Gross Torque - SAE J1995	-	-	372 ft·lbf	-	-
Maximum Gross Torque - ISO 14396	-	-	369 ft·lbf	-	-
Maximum Net Torque - SAE J1349	-	-	366 ft·lbf	-	-
Maximum Net Torque - ISO 9249	-	-	363 ft·lbf	-	-
Maximum Gross Power - ISO 14396	-	-	121 hp	-	-
Engine Power - ISO 14396	-	-	-	1847 hp	-
Net Power - SAE J1349 - Standard Ambient	-	-	-	1739 hp	-
Net Power - SAE J1349 - High Ambient	-	-	-	1696 hp	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	-	8549 lb/ft	-
Note (3)	-	-	-	The gross power advertised is with the fan at maximum speed.	-
Net Power	-	-	-	-	814 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	-	-	900 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	-	937 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	-	-	907 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	-	944 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	-	884 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	-	921 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	-	893 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	-	931 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	-	823 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	-	823 hp
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	-	-	3514 ft·lbf
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	-	-	3555 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	-	-	3537 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	-	-	3570 ft·lbf
Operating Specifications
Operating Weight - Standard	178517 lb	-	-	543772 lb	-
Bucket Capacity Range	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	4.7-13 m3 (6.2-17 yd3)	-	17.2-43.6 m3 (22.3-57 yd3)	11.5-24.5 m³ (15-32 yd³)
Rated Payload - Standard	17.5 ton (US)	-	-	-	25.5 ton (US)
Rated Payload - High Lift	17.5 ton (US)	-	-	-	22.5 ton (US)
Cat Truck Match - Standard	773-775	-	-	785/789	775/777
Cat Truck Match - High Lift	775-777	-	-	789/793/794	785
Operating Weight	-	116362 lb	-	-	233430 lb
Rated Payload - Quarry Face	-	12.5 t	-	-	-
Rated Payload - Loose Material	-	16 t	-	-	-
Operating Weight - High Lift	-	-	-	547675 lb	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)	-
Note	-	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Rated Payload - Standard (Material Handler)	-	-	-	-	30 ton (US)
Rated Payload - High Lift (Material Handler)	-	-	-	-	27 ton (US)
Transmission
Transmission Type	Cat planetary power shift	Cat switched reluctance electric drive	-	Cat Planetary Power Shift	Cat Planetary Powershift
Forward - 1	4.6 mile/h	-	-	4.6 mile/h	4.3 mile/h
Forward - 2	8.2 mile/h	-	-	8 mile/h	7.4 mile/h
Forward - 3	14.5 mile/h	-	-	13.6 mile/h	12.7 mile/h
Reverse - 1	5.1 mile/h	-	-	5 mile/h	4.7 mile/h
Reverse - 2	9.1 mile/h	-	-	8.8 mile/h	8.1 mile/h
Reverse - 3	16 mile/h	-	-	14.9 mile/h	13.9 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	-	Lock-up disables	Disabled
Direct Drive - Forward 2	8.2 mile/h	-	-	8.7 mile/h	8 mile/h
Direct Drive - Forward 3	14.5 mile/h	-	-	15.2 mile/h	14 mile/h
Direct Drive - Reverse 1	5.1 mile/h	-	-	Lock-up disables	5 mile/h
Direct Drive - Reverse 2	9.1 mile/h	-	-	9.6 mile/h	8.8 mile/h
Direct Drive - Reverse 3	16 mile/h	-	-	16.8 mile/h	15.3 mile/h
Note	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Travel speeds based on 58/85-57 tires.	-
Forward 1 (virtual)	-	4.3 mile/h	-	-	-
Forward 2 (virtual)	-	7 mile/h	-	-	-
Forward 3 (virtual)	-	13.8 mile/h	-	-	-
Forward 4 (virtual)	-	20 mile/h	-	-	-
Reverse 1 (virtual)	-	4.3 mile/h	-	-	-
Reverse 2 (virtual)	-	7 mile/h	-	-	-
Reverse 3 (virtual)	-	17.5 mile/h	-	-	-
Forward and Reverse - Speed Range 3	-	-	25 mile/h	-	-
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h	-	-
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h	-	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive flow control	EH-Positive Flow Control, Flow Sharing	-	Positive Flow Control	Positive Flow Control
Lift/Tilt System	Variable displacement piston	-	-	-	-
Maximum Flow at 1,800 rpm	240 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4786 psi	4757 psi	-	5004 psi	5000 psi
Cylinders, Double Acting - Lift, Bore and Stroke	235 mm × 1287 mm (9.3 in × 50.7 in)	-	-	370 × 1713 mm (14.6 × 67.4 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	292.1 mm × 820 mm (11.5 in × 32.3 in)	-	-	310 × 1086 mm (12.2 × 42.8 in)	-
Pilot System	Open loop and pressure reducing	-	-	Open Loop and Pressure Reducing	-
Pilot Relief Setting	507 psi	-	-	-	-
Lift/Tilt System - Pump	-	Variable displacement piston	-	Variable Displacement Piston	Variable Displacement Piston
Maximum Flow at 1,400-1,600 rpm	-	153 gpm	-	-	-
Lift Cylinder - Bore	-	8.7 in	-	-	9.3 in
Lift Cylinder - Stroke	-	41.3 in	-	-	63.5 in
Tilt Cylinder - Bore	-	8.7 in	-	-	11.5 in
Tilt Cylinder - Stroke	-	27 in	-	-	41.5 in
Maximum Flow at 1,700 rpm Engine Speed	-	-	-	541 gpm	-
Maximum Flow at 2,165 rpm	-	-	-	-	250 gpm
Hydraulic Cycle Times
Rack Back	4.3 s	4.5 s	-	4.9 s	2.3 s
Raise	8.6 s	8 s	-	12.6 s	9 s
Dump	2.9 s	2.2 s	-	3.1 s	2.6 s
Lower	3.7 s	-	-	-	-
Lower Float Down	3.7 s	3.5 s	-	4.2 s	-
Total Hydraulic Cycle Time - Empty Bucket	13.8 s	-	-	-	-
Total Hydraulic Cycle Time	-	18.2 s	-	-	17.1 s
Rack Back - High Lift	-	-	-	-	2.3 s
Raise - High Lift	-	-	-	-	9 s
Dump - High Lift	-	-	-	-	2.6 s
Float Down	-	-	-	-	3.2 s
Float Down - High Lift	-	-	-	-	3.2 s
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, load sensing	-	Pilot, Load Sensing	Pilot, Load Sensing
Steering System - Pump	Piston, variable displacement	Piston, variable displacement	-	Piston, Variable Displacement	Piston, Variable Displacement
Maximum Flow at 1,400 rpm	96.2 gpm	-	-	-	-
Relief Valve Setting - Steering	5004 psi	-	-	-	-
Total Steering Angle	70°	86°	-	80 degrees	80°
Maximum Flow at 1,400-1,600 rpm	-	71.3 gpm	-	-	-
Steering Cut Off Pressure	-	4351 psi	-	-	4500 psi
Steering Cycle Times - High Idle	-	3.4 s	-	4.3 s	3.1 s
Steering Cycle Times - Low Idle	-	5.6 s	-	7.6 s	4.9 s
Maximum Flow at 1,400-1,850 rpm	-	-	-	-	70 gpm
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	-	-
Axles
Front	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed	Fixed
Rear	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion	Trunnion
Oscillation Angle	8.5°	13°	-	9°	±9°
Brakes
Brakes	ISO 3450: 2011	ISO 3450:2011	-	ISO 3450:2011	ISO 3450:2011
Service Refill Capacities
Fuel Tank	281 gal (US)	147 gal (US)	43.6 gal (US)	-	385.7 gal (US)
Cooling System	54.9 gal (US)	-	5.7 gal (US)	-	-
Engine Crankcase	20 gal (US)	16 gal (US)	2.6 gal (US)	-	-
Transmission	29.1 gal (US)	16 gal (US)	0.8 gal (US)	-	51.5 gal (US)
Differential - Final Drives - Front	71.6 gal (US)	49 gal (US)	-	-	96.4 gal (US)
Differential - Final Drives - Rear	68.9 gal (US)	49 gal (US)	-	-	96.4 gal (US)
Hydraulic System Factory Fill	210 gal (US)	-	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	68.9 gal (US)	-	-	-	-
Hydraulic Tank - Steering and Braking	34.9 gal (US)	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	-
Cooling System - Jacket Water	-	30 gal (US)	-	-	-
Cooling Systems - Power Train	-	8 gal (US)	-	-	-
Diesel Exhaust Fluid Tank	-	8.7 gal (US)	-	-	-
Hydraulic System - Implement/Steering	-	126 gal (US)	-	-	-
Axles - Rear	-	-	4.5 gal (US)	-	-
Hydraulic System - Including Tank	-	-	25.9 gal (US)	-	-
Hydraulic Tank	-	-	14.5 gal (US)	-	-
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)	-	-
Axles - Front	-	-	4.5 gal (US)	-	-
Cooling Systems	-	-	-	-	59.4 gal (US)
Crankcase	-	-	-	-	31.7 gal (US)
Hydraulic System Factory Fill (Implement)	-	-	-	-	104.1 gal (US)
Hydraulic Tank - Implement	-	-	-	-	60.2 gal (US)
Hydraulic Factory Fill (Steering)	-	-	-	-	32.5 gal (US)
Hydraulic Tank (Steering Tank Only)	-	-	-	-	26.3 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	109 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	-	109 dB(A)	-	-	-
Note (5)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	-	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-	-
Ground to Top of Hood	12.7 ft	-	-	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	15.4 ft	-	-	-	-
Wheel Base	15.1 ft	-	-	-	-
Maximum Overall Length	42.9 ft	-	-	-	-
Ground to Lower Hitch Clearance	2 ft	-	-	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-	-
Clearance at Maximum Lift	7.2 ft	-	-	-	-
Rack Back Angle at Ground Level	40.4°	-	-	-	-
Rack Back Angle at Carry	48.8°	-	-	-	-
B-Pin Height - Maximum Lift	19.7 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	27.2 ft	-	-	-	-
Rack Angle at Maximum Lift	63.7°	-	-	-	-
Dump Angle at Maximum Lift	45°	-	-	-	-
Reach - Maximum Lift	7.2 ft	-	-	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-	-
Ground to Top of Hood	12.7 ft	-	-	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	17.8 ft	-	-	-	-
Wheel Base	15.1 ft	-	-	-	-
Maximum Overall Length	45.3 ft	-	-	-	-
Ground to Lower Hitch Clearance	2 ft	-	-	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-	-
Clearance at Maximum Lift	14.8 ft	-	-	-	-
Rack Back Angle at Ground Level	39.9°	-	-	-	-
Rack Back Angle at Carry	49.3°	-	-	-	-
B-Pin Height - Maximum Lift	21.2 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	28.7 ft	-	-	-	-
Rack Angle at Maximum Lift	60.6°	-	-	-	-
Dump Angle at Maximum Lift	51°	-	-	-	-
Reach - Maximum Lift	8.5 ft	-	-	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-	-
Operator's Cab
ROPS/FOPS	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	-	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	-	110 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	-	110 dB(A)	-	-	-
Note (1)	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	-
Note (2)	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	-
Note (3)	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (5)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	-	14.8 ft	-	-	-
Ground to Top of Hood	-	10.9 ft	-	-	-
Ground to Bumper Clearance	-	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	14 ft	-	-	-
Wheel Base	-	14.9 ft	-	-	-
Maximum Overall Length	-	39.3 ft	-	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-	-
Ground to Center of Axles	-	3.2 ft	-	-	-
Clearance at Maximum Lift	-	11.9 ft	-	-	-
B-Pin Height - Maximum Lift	-	18 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	24.5 ft	-	-	-
Reach - Maximum Lift	-	6.5 ft	-	-	-
Note	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	-	14.8 ft	-	-	-
Ground to Top of Hood	-	10.9 ft	-	-	-
Ground to Bumper Clearance	-	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	15.3 ft	-	-	-
Wheel Base	-	14.9 ft	-	-	-
Maximum Overall Length	-	40.7 ft	-	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-	-
Ground to Center of Axles	-	3.2 ft	-	-	-
Clearance at Maximum Lift	-	13.3 ft	-	-	-
B-Pin Height - Maximum Lift	-	19.3 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	25.8 ft	-	-	-
Reach - Maximum Lift	-	6.8 ft	-	-	-
Note	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	-	13.8 ft	-	-	-
Ground to Top of Hood	-	10.9 ft	-	-	-
Ground to Bumper Clearance	-	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-	-
Front Axle Centerline to Fork Tip	-	16.5 ft	-	-	-
Wheel Base	-	14.9 ft	-	-	-
Maximum Overall Length	-	41.9 ft	-	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-	-
Ground to Center of Front Axle	-	3.2 ft	-	-	-
Fork Height with Level Arms	-	8.1 ft	-	-	-
Fork Top Clamp Opening	-	13.1 ft	-	-	-
Fork Height at Maximum Lift	-	17.2 ft	-	-	-
Hinge Pin Height at Maximum Lift	-	16.1 ft	-	-	-
Dump Angle at Maximum Lift	-	-39.4 °	-	-	-
Weights
Operating Weight	-	-	21742 lb	-	-
Buckets
Bucket Capacities	-	-	1.3-3.5 m3 (1.7-4.6 yd3)	-	11.5-24.5 m³ (15-32 yd³)
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-	-
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-	-
Sustainability
Recyclability	-	-	95%	-	-
Cab
ROPS	-	-	ISO 3471:2008	-	-
FOPS	-	-	ISO 3449:2005	-	-
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.	-	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	43.6 gpm	-	-
Relief Pressure - Tilt Cylinder	-	-	4641 psi	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	25 gpm	-	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	4641 psi	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	2.7 s	-	-
Note	-	-	All cycle times listed are with cylinder snubbing turned off.	-	-
Maximum Working Pressure - Implement Pump	-	-	4061 psi	-	-
Hydraulic Cycle Time - Total Cycle Time	-	-	11.5 s	-	-
Hydraulic Cycle Time - Rackback	-	-	2.2 s	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.8 s	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	4.8 s	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	40 gpm	-	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	25 gpm	-	-
Steering
Maximum Working Pressure - Steering Pump	-	-	3190 psi	-	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	2.3 s	-	-
Steering Articulation Angle - Each Direction	-	-	40 °	-	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.4 turns	-	-
Maximum Flow - Steering Pump	-	-	21.7 gpm	-	-
Tires
Other Choices Include	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-	-
Standard Size	-	-	17.5 R25 L2 XTLA	-	-
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.	-	-
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-
Complete System Fill
Fuel Tank - Standard	-	-	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	-	-	1414 gal (US)	-
Cooling System	-	-	-	138 gal (US)	-
Engine Crankcase	-	-	-	76 gal (US)	-
Transmission	-	-	-	110 gal (US)	-
Differential - Final Drives - Front	-	-	-	220 gal (US)	-
Differential - Final Drives - Rear	-	-	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	-	-	20 gal (US)	-
Note	-	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	-	109.4 °F	109.4 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	-	127.4 °F	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	-	-	131 °F
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	-	119 dB(A)	-
Note	-	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	Machine Sound Level (ISO 6396:2008) - 116 dB(A)
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	-	117 dB(A)	-
Note	-	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	Machine Sound Level (ISO 6396:2008) - 113 dB(A)
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	-	28.8 ft	22.8 ft
Clearance at Maximum Lift	-	-	-	19.8 ft	15.2 ft
Dump Angle at Maximum Lift	-	-	-	–50.0 degrees	-49.5 degrees
Front Axle Centerline to Bucket Tip	-	-	-	21.9 ft	18 ft
Ground to Bumper Clearance	-	-	-	4.4 ft	3.8 ft
Ground to Center of Axles	-	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	-	2.9 ft	2.2 ft
Ground to Top of Exhaust Stacks	-	-	-	23.2 ft	17 ft
Ground to Top of Hood	-	-	-	18.6 ft	13.1 ft
Ground to Top of ROPS	-	-	-	23.4 ft	18.3 ft
Maximum Overall Height - Bucket Raised	-	-	-	39.3 ft	30.8 ft
Maximum Overall Length	-	-	-	64.6 ft	50.8 ft
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	-	59.5 degrees	-
Rack Back Angle - Carry	-	-	-	47.7 degrees	48.9 degrees
Rack Back Angle - Ground Level	-	-	-	39.7 degrees	40.2 degrees
Reach - Maximum Lift	-	-	-	9.6 ft	8.2 ft
Rear Axle - Centerline to Bumper	-	-	-	20.4 ft	13.5 ft
Tread Width	-	-	-	14.1 ft	10.83 ft
Wheel Base	-	-	-	22.3 ft	19.3 ft
Width - Over Tires - With Bulge	-	-	-	18.8 ft	14.74 ft
Ground to Center of Front Axle	-	-	-	-	4.3 ft
Rack Back Angle - Maximum Lift	-	-	-	-	56.9 degrees
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	-	31.6 ft	24.5 ft
Clearance at Maximum Lift	-	-	-	22.6 ft	17.2 ft
Dump Angle at Maximum Lift	-	-	-	–50.0 degrees	-48.1 degrees
Front Axle Centerline to Bucket Tip	-	-	-	24.2 ft	18.8 ft
Ground to Bumper Clearance	-	-	-	4.4 ft	3.8 ft
Ground to Center of Axles	-	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	-	2.9 ft	2.2 ft
Ground to Top of Exhaust Stacks	-	-	-	23.2 ft	17 ft
Ground to Top of Hood	-	-	-	18.6 ft	13.1 ft
Ground to Top of ROPS	-	-	-	23.4 ft	18.3 ft
Maximum Overall Height - Bucket Raised	-	-	-	42.1 ft	32 ft
Maximum Overall Length	-	-	-	66.9 ft	51.6 ft
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	-	59.4 degrees	-
Rack Back Angle - Carry	-	-	-	53.5 degrees	51.6 degrees
Rack Back Angle - Ground Level	-	-	-	45 degrees	42.5 degrees
Reach - Maximum Lift	-	-	-	9.4 ft	7.6 ft
Rear Axle - Centerline to Bumper	-	-	-	20.4 ft	13.5 ft
Tread Width	-	-	-	14.1 ft	10.83 ft
Wheel Base	-	-	-	22.3 ft	19.3 ft
Width - Over Tires - With Bulge	-	-	-	18.8 ft	14.75 ft
Rack Back Angle - Maximum Lift	-	-	-	-	56.2 degrees
Ground to Center of Front Axle	-	-	-	-	4.3 ft

Compare Equipment Go Back

990 Wheel Loader

988 XE Wheel Loader

920 Compact Wheel Loader

995 Wheel Loader

992 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Operator's Cab

Sound Performance - Tier 3 / Stage IIIA

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Weights

Buckets

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate