Compare

Compare Equipment Go Back

Engine
	990 Wheel Loader View Product	992 Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	986 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	752 hp	-	-	-	449 hp
Engine Model	Cat® C27	Cat® C32B	Cat® 3516E	Cat C3.6	Cat® C15
Emissions	Option 2 - Emits equivalent to U.S. EPA Tier 2	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.	-
Rated Speed	1800 r/min	1750 rpm	-	-	2000
Gross Power - SAE J1995:2014	766 hp	-	1870 hp	-	456 hp
Net Power - SAE J1349:2011 - Standard Ambient	699 hp	-	-	-	-
Net Power - SAE J1349:2011 - High Ambient	648 hp	-	-	-	-
Bore	5.4 in	5.7 in	6.7 in	3.85 in	5.4 in
Stroke	6 in	6.4 in	8.5 in	4.72 in	6.75 in
Displacement	1649.5 in³	1963.5 in³	4766 in³	220 in³	927 in²
Peak Torque - 1,200 rpm	2624 lb/ft	-	-	-	-
Torque Rise	18 %	-	39%	-	16%
Note	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Net Power	-	814 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	900 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	937 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	907 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	944 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	884 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	921 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	893 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	931 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	823 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	823 hp	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	3514 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	3555 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	3537 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	3570 ft·lbf	-	-	-
Engine Power - ISO 14396	-	-	1847 hp	-	-
Net Power - SAE J1349 - Standard Ambient	-	-	1739 hp	-	-
Net Power - SAE J1349 - High Ambient	-	-	1696 hp	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	8549 lb/ft	-	-
Note (1)	-	-	The power ratings apply when tested under the reference conditions for the specified standard.	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	-	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Note (3)	-	-	The gross power advertised is with the fan at maximum speed.	-	-
Maximum Gross Power	-	-	-	121 hp	-
Rated Net Power - Rated Engine Speed	-	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	-	-	2200 r/min	-
Rated Net Power - SAE J1349	-	-	-	120 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	-	-	122 hp	-
Rated Net Power - ISO 9249	-	-	-	118 hp	-
Maximum Gross Torque - SAE J1995	-	-	-	372 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	-	-	369 ft·lbf	-
Maximum Net Torque - SAE J1349	-	-	-	366 ft·lbf	-
Maximum Net Torque - ISO 9249	-	-	-	363 ft·lbf	-
Maximum Gross Power - ISO 14396	-	-	-	121 hp	-
Peak Power Speed	-	-	-	-	1600
Net Power - SAE J1349:2011	-	-	-	-	373 hp
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	-	373 hp
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	-	373 hp
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	-	1778 lb/ft
Operating Specifications
Operating Weight - Standard	178517 lb	-	543772 lb	-	97785 lb
Bucket Capacity Range	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	11.5-24.5 m³ (15-32 yd³)	17.2-43.6 m3 (22.3-57 yd3)	-	5.0-10.3 m³ (6.5-13.5 yd³)
Rated Payload - Standard	17.5 ton (US)	25.5 ton (US)	-	-	-
Rated Payload - High Lift	17.5 ton (US)	22.5 ton (US)	-	-	-
Cat Truck Match - Standard	773-775	775/777	785/789	-	770/735/740/745
Cat Truck Match - High Lift	775-777	785	789/793/794	-	772/773
Operating Weight	-	233430 lb	-	-	-
Rated Payload - Standard (Material Handler)	-	30 ton (US)	-	-	-
Rated Payload - High Lift (Material Handler)	-	27 ton (US)	-	-	-
Operating Weight - High Lift	-	-	547675 lb	-	104005 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	60 ton (US)	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	55 ton (US)	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-	-
Note	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-
Rated Payload - Standard (Quarry Face)	-	-	-	-	11 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	-	14 ton (US)
Rated Payload - High Lift (Quarry Face)	-	-	-	-	11 ton (US)
Rated Payload - Loose Material (High Lift)	-	-	-	-	12.1 ton (US)
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Powershift	Cat Planetary Power Shift	-	Cat planetary power shift
Forward - 1	4.6 mile/h	4.3 mile/h	4.6 mile/h	-	5 mile/h
Forward - 2	8.2 mile/h	7.4 mile/h	8 mile/h	-	8 mile/h
Forward - 3	14.5 mile/h	12.7 mile/h	13.6 mile/h	-	-
Reverse - 1	5.1 mile/h	4.7 mile/h	5 mile/h	-	5 mile/h
Reverse - 2	9.1 mile/h	8.1 mile/h	8.8 mile/h	-	8 mile/h
Reverse - 3	16 mile/h	13.9 mile/h	14.9 mile/h	-	-
Direct Drive - Forward 1	Lock-up disabled	Disabled	Lock-up disables	-	-
Direct Drive - Forward 2	8.2 mile/h	8 mile/h	8.7 mile/h	-	8 mile/h
Direct Drive - Forward 3	14.5 mile/h	14 mile/h	15.2 mile/h	-	14 mile/h
Direct Drive - Reverse 1	5.1 mile/h	5 mile/h	Lock-up disables	-	-
Direct Drive - Reverse 2	9.1 mile/h	8.8 mile/h	9.6 mile/h	-	9 mile/h
Direct Drive - Reverse 3	16 mile/h	15.3 mile/h	16.8 mile/h	-	16 mile/h
Note	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-
Forward and Reverse - Speed Range 3	-	-	-	25 mile/h	-
Forward and Reverse - Speed Range 2*	-	-	-	12.5 mile/h	-
Forward and Reverse - Speed Range 1*	-	-	-	6.3 mile/h	-
Direct Drive - Forward 4	-	-	-	-	24 mile/h
Direct Drive - Reverse 4	-	-	-	-	25.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive flow control	Positive Flow Control	Positive Flow Control	-	Load Sense
Lift/Tilt System	Variable displacement piston	-	-	-	-
Maximum Flow at 1,800 rpm	240 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4786 psi	5000 psi	5004 psi	-	4050 psi
Cylinders, Double Acting - Lift, Bore and Stroke	235 mm × 1287 mm (9.3 in × 50.7 in)	-	370 × 1713 mm (14.6 × 67.4 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	292.1 mm × 820 mm (11.5 in × 32.3 in)	-	310 × 1086 mm (12.2 × 42.8 in)	-	-
Pilot System	Open loop and pressure reducing	-	Open Loop and Pressure Reducing	-	-
Pilot Relief Setting	507 psi	-	-	-	-
Lift/Tilt System - Pump	-	Variable Displacement Piston	Variable Displacement Piston	-	2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm	-	250 gpm	-	-	123 gpm
Lift Cylinder - Bore	-	9.3 in	-	-	7.5 in
Lift Cylinder - Stroke	-	63.5 in	-	-	45 in
Tilt Cylinder - Bore	-	11.5 in	-	-	6.7 in
Tilt Cylinder - Stroke	-	41.5 in	-	-	28.4 in
Maximum Flow at 1,700 rpm Engine Speed	-	-	541 gpm	-	-
Hydraulic Cycle Times
Rack Back	4.3 s	2.3 s	4.9 s	-	4.5 s
Raise	8.6 s	9 s	12.6 s	-	9 s
Dump	2.9 s	2.6 s	3.1 s	-	3.5 s
Lower	3.7 s	-	-	-	5.2 s
Lower Float Down	3.7 s	-	4.2 s	-	4.3 s
Total Hydraulic Cycle Time - Empty Bucket	13.8 s	-	-	-	-
Rack Back - High Lift	-	2.3 s	-	-	-
Raise - High Lift	-	9 s	-	-	-
Dump - High Lift	-	2.6 s	-	-	-
Float Down	-	3.2 s	-	-	-
Float Down - High Lift	-	3.2 s	-	-	-
Total Hydraulic Cycle Time	-	17.1 s	-	-	21.3 s
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	Pilot, Load Sensing	-	Load Sense
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	Piston, Variable Displacement	-	Piston, variable displacement
Maximum Flow at 1,400 rpm	96.2 gpm	-	-	-	52 gpm
Relief Valve Setting - Steering	5004 psi	-	-	-	-
Total Steering Angle	70°	80°	80 degrees	-	70°
Maximum Flow at 1,400-1,850 rpm	-	70 gpm	-	-	-
Steering Cut Off Pressure	-	4500 psi	-	-	4000 psi
Steering Cycle Times - Low Idle	-	4.9 s	7.6 s	-	-
Steering Cycle Times - High Idle	-	3.1 s	4.3 s	-	-
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	-	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
Front	Fixed	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion
Oscillation Angle	8.5°	±9°	9°	-	±12.5°
Oscillation Angle - Chain Arrangement	-	-	-	-	±8.5°
Brakes
Brakes	ISO 3450: 2011	ISO 3450:2011	ISO 3450:2011	-	ISO 3450:2011
Service Refill Capacities
Fuel Tank	281 gal (US)	385.7 gal (US)	-	43.6 gal (US)	141 gal (US)
Cooling System	54.9 gal (US)	-	-	5.7 gal (US)	-
Engine Crankcase	20 gal (US)	-	-	2.6 gal (US)	-
Transmission	29.1 gal (US)	51.5 gal (US)	-	0.8 gal (US)	20 gal (US)
Differential - Final Drives - Front	71.6 gal (US)	96.4 gal (US)	-	-	-
Differential - Final Drives - Rear	68.9 gal (US)	96.4 gal (US)	-	-	-
Hydraulic System Factory Fill	210 gal (US)	-	-	-	87 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan	68.9 gal (US)	-	-	-	-
Hydraulic Tank - Steering and Braking	34.9 gal (US)	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	-	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-
Cooling Systems	-	59.4 gal (US)	-	-	26 gal (US)
Crankcase	-	31.7 gal (US)	-	-	9 gal (US)
Hydraulic System Factory Fill (Implement)	-	104.1 gal (US)	-	-	-
Hydraulic Tank - Implement	-	60.2 gal (US)	-	-	-
Hydraulic Factory Fill (Steering)	-	32.5 gal (US)	-	-	-
Hydraulic Tank (Steering Tank Only)	-	26.3 gal (US)	-	-	-
Axles - Rear	-	-	-	4.5 gal (US)	-
Hydraulic System - Including Tank	-	-	-	25.9 gal (US)	-
Hydraulic Tank	-	-	-	14.5 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	-	-	4.8 gal (US)	-
Axles - Front	-	-	-	4.5 gal (US)	-
Fuel Tank - Short Lift	-	-	-	-	127 gal (US)
Diesel Exhaust Fluid Tank	-	-	-	-	6 gal (US)
Axle Oil - Differentials and Final Drives - Front	-	-	-	-	49 gal (US)
Axle Oil - Differentials and Final Drives - Rear	-	-	-	-	45 gal (US)
Hydraulic System - Tank Only	-	-	-	-	34 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	-	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Machine Sound Power Level (ISO 6395:2008)**	-	-	-	-	110 dB(A)
Note (5)	-	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	-	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-	13.3 ft
Ground to Top of Hood	12.7 ft	-	-	-	10.7 ft
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-	10.3 ft
Front Axle Centerline to Bucket Tip	15.4 ft	-	-	-	13.8 ft
Wheel Base	15.1 ft	-	-	-	12.5 ft
Maximum Overall Length	42.9 ft	-	-	-	36.6 ft
Ground to Lower Hitch Clearance	2 ft	-	-	-	1.5 ft
Ground to Center of Front Axle	4.2 ft	-	-	-	3.2 ft
Clearance at Maximum Lift	7.2 ft	-	-	-	10.1 ft
Rack Back Angle at Ground Level	40.4°	-	-	-	-
Rack Back Angle at Carry	48.8°	-	-	-	-
B-Pin Height - Maximum Lift	19.7 ft	-	-	-	16.1 ft
Maximum Overall Height - Bucket Raised	27.2 ft	-	-	-	22.4 ft
Rack Angle at Maximum Lift	63.7°	-	-	-	-
Dump Angle at Maximum Lift	45°	-	-	-	-
Reach - Maximum Lift	7.2 ft	-	-	-	7.1 ft
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Fuel Tank Clearance	-	-	-	-	2.3 ft
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-	13.3 ft
Ground to Top of Hood	12.7 ft	-	-	-	10.7 ft
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-	10.3 ft
Front Axle Centerline to Bucket Tip	17.8 ft	-	-	-	15.3 ft
Wheel Base	15.1 ft	-	-	-	12.5 ft
Maximum Overall Length	45.3 ft	-	-	-	38 ft
Ground to Lower Hitch Clearance	2 ft	-	-	-	1.5 ft
Ground to Center of Front Axle	4.2 ft	-	-	-	3.2 ft
Clearance at Maximum Lift	14.8 ft	-	-	-	11.6 ft
Rack Back Angle at Ground Level	39.9°	-	-	-	-
Rack Back Angle at Carry	49.3°	-	-	-	-
B-Pin Height - Maximum Lift	21.2 ft	-	-	-	17.6 ft
Maximum Overall Height - Bucket Raised	28.7 ft	-	-	-	23.9 ft
Rack Angle at Maximum Lift	60.6°	-	-	-	-
Dump Angle at Maximum Lift	51°	-	-	-	-
Reach - Maximum Lift	8.5 ft	-	-	-	7.4 ft
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Fuel Tank Clearance	-	-	-	-	2.3 ft
Buckets
Bucket Capacities	-	11.5-24.5 m³ (15-32 yd³)	-	1.3-3.5 m3 (1.7-4.6 yd3)	-
Bucket Capacities - General Purpose	-	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	109.4 °F	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	131 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	131 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	127.4 °F	-	-
Sound Performance - Standard
Note	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	74 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	-	119 dB(A)	-	-
Sound Performance - Suppression
Note	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	73 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	-	117 dB(A)	-	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	17 ft	23.2 ft	-	-
Ground to Top of ROPS	-	18.3 ft	23.4 ft	-	-
Ground to Top of Hood	-	13.1 ft	18.6 ft	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	3.8 ft	4.4 ft	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	2.9 ft	-	-
Reach - Maximum Lift	-	8.2 ft	9.6 ft	-	-
Clearance at Maximum Lift	-	15.2 ft	19.8 ft	-	-
B-Pin Height - Maximum Lift	-	22.8 ft	28.8 ft	-	-
Maximum Overall Height - Bucket Raised	-	30.8 ft	39.3 ft	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	20.4 ft	-	-
Tread Width	-	10.83 ft	14.1 ft	-	-
Rack Back Angle - Maximum Lift	-	56.9 degrees	-	-	-
Dump Angle at Maximum Lift	-	-49.5 degrees	–50.0 degrees	-	-
Rack Back Angle - Ground Level	-	40.2 degrees	39.7 degrees	-	-
Width - Over Tires - With Bulge	-	14.74 ft	18.8 ft	-	-
Rack Back Angle - Carry	-	48.9 degrees	47.7 degrees	-	-
Wheel Base	-	19.3 ft	22.3 ft	-	-
Maximum Overall Length	-	50.8 ft	64.6 ft	-	-
Front Axle Centerline to Bucket Tip	-	18 ft	21.9 ft	-	-
Ground to Center of Axles	-	-	6 ft	-	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	-	59.5 degrees	-	-
Dimensions - High Lift - Approximate
Tread Width	-	10.83 ft	14.1 ft	-	-
Rack Back Angle - Ground Level	-	42.5 degrees	45 degrees	-	-
Dump Angle at Maximum Lift	-	-48.1 degrees	–50.0 degrees	-	-
Rack Back Angle - Maximum Lift	-	56.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	14.75 ft	18.8 ft	-	-
Rack Back Angle - Carry	-	51.6 degrees	53.5 degrees	-	-
Ground to Top of Exhaust Stacks	-	17 ft	23.2 ft	-	-
Ground to Top of ROPS	-	18.3 ft	23.4 ft	-	-
Ground to Top of Hood	-	13.1 ft	18.6 ft	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	3.8 ft	4.4 ft	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	2.9 ft	-	-
Reach - Maximum Lift	-	7.6 ft	9.4 ft	-	-
Clearance at Maximum Lift	-	17.2 ft	22.6 ft	-	-
B-Pin Height - Maximum Lift	-	24.5 ft	31.6 ft	-	-
Maximum Overall Height - Bucket Raised	-	32 ft	42.1 ft	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	20.4 ft	-	-
Wheel Base	-	19.3 ft	22.3 ft	-	-
Maximum Overall Length	-	51.6 ft	66.9 ft	-	-
Front Axle Centerline to Bucket Tip	-	18.8 ft	24.2 ft	-	-
Ground to Center of Axles	-	-	6 ft	-	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	-	59.4 degrees	-	-
Complete System Fill
Fuel Tank - Standard	-	-	856 gal (US)	-	-
Fuel Tank - With 24 hr Attachment	-	-	1414 gal (US)	-	-
Cooling System	-	-	138 gal (US)	-	-
Engine Crankcase	-	-	76 gal (US)	-	-
Transmission	-	-	110 gal (US)	-	-
Differential - Final Drives - Front	-	-	220 gal (US)	-	-
Differential - Final Drives - Rear	-	-	200 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	270 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	-	100 gal (US)	-	-
Oil Renewal System (ORS)*	-	-	20 gal (US)	-	-
Note	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-
Weights
Operating Weight	-	-	-	21742 lb	-
Sustainability
Recyclability	-	-	-	95%	-
Cab
ROPS	-	-	-	ISO 3471:2008	-
FOPS	-	-	-	ISO 3449:2005	-
Note (3)	-	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (2)	-	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (1)	-	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Note (4)	-	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	-	43.6 gpm	-
Relief Pressure - Tilt Cylinder	-	-	-	4641 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	25 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	4641 psi	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	-	2.7 s	-
Note	-	-	-	All cycle times listed are with cylinder snubbing turned off.	-
Maximum Working Pressure - Implement Pump	-	-	-	4061 psi	-
Hydraulic Cycle Time - Total Cycle Time	-	-	-	11.5 s	-
Hydraulic Cycle Time - Rackback	-	-	-	2.2 s	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	-	1.8 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	-	4.8 s	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	40 gpm	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	25 gpm	-
Steering
Maximum Working Pressure - Steering Pump	-	-	-	3190 psi	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	-	2.3 s	-
Steering Articulation Angle - Each Direction	-	-	-	40 °	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	-	3.4 turns	-
Maximum Flow - Steering Pump	-	-	-	21.7 gpm	-
Tires
Other Choices Include	-	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-
Standard Size	-	-	-	17.5 R25 L2 XTLA	-
Note (1)	-	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Note (3)	-	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Operator's Cab
ROPS/FOPS	-	-	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	-	74 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	-	-	-	-	110 dB(A)
Note (1)	-	-	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	-	-	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	-	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	-	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	-	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	1.5 ft
Reach at Maximum Lift	-	-	-	-	8 ft
Clearance at Maximum Lift	-	-	-	-	10.7 ft
B-Pin Height at Maximum Lift	-	-	-	-	15 ft
Maximum Overall Height, Bucket Raised	-	-	-	-	20.9 ft
Rear Axle Center Line to Bumper	-	-	-	-	10.3 ft
Wheel Base	-	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	-	35 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	12.2 ft
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	1.5 ft
B-Pin Height at Maximum Lift	-	-	-	-	15 ft
Rear Axle Center Line to Bumper	-	-	-	-	10.3 ft
Wheel Base	-	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	-	35.4 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	12.6 ft

Compare Equipment Go Back

990 Wheel Loader

992 Wheel Loader

995 Wheel Loader

920 Compact Wheel Loader

986 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Buckets

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Complete System Fill

Weights

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Operator's Cab

Sound Performance - Tier 3 / Stage IIIA

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork