Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
-
Net Power - ISO 9249
-
225 hp
-
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric
-
228 hp
-
Maximum Power - 1,700 rpm - ISO 14396
-
240 hp
-
Maximum Power - 1,700 rpm - ISO 14396 - Metric
-
243 hp
-
Peak Gross Torque - 1,400 rpm - SAE J1995
-
811 ft·lbf
-
Peak Gross Torque - 1,400 rpm - ISO 14396
-
805 ft·lbf
-
Maximum Net Power - 1,700 rpm - ISO 9249
-
225 hp
-
Maximum Net Power - 1,700 rpm - SAE J1349
-
225 hp
-
Maximum Power - 1,700 rpm - SAE J1995
-
241 hp
-
Operating Specifications
Operating Weight - Standard
178517 lb
-
-
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
-
-
Rated Payload - Standard
17.5 ton (US)
-
-
Rated Payload - High Lift
17.5 ton (US)
-
-
Cat Truck Match - Standard
773-775
-
-
Cat Truck Match - High Lift
775-777
-
-
Transmission
Transmission Type
Cat planetary power shift
-
-
Forward - 1
4.6 mile/h
4.5 mile/h
-
Forward - 2
8.2 mile/h
8 mile/h
-
Forward - 3
14.5 mile/h
14.2 mile/h
-
Reverse - 1
5.1 mile/h
4.5 mile/h
-
Reverse - 2
9.1 mile/h
8 mile/h
-
Reverse - 3
16 mile/h
14.2 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8.2 mile/h
-
-
Direct Drive - Forward 3
14.5 mile/h
-
-
Direct Drive - Reverse 1
5.1 mile/h
-
-
Direct Drive - Reverse 2
9.1 mile/h
-
-
Direct Drive - Reverse 3
16 mile/h
-
-
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
-
Forward - 4
-
22.4 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive flow control
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 1,800 rpm
240 gpm
-
-
Relief Valve Setting - Lift/Tilt
4786 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
-
-
Pilot System
Open loop and pressure reducing
-
-
Pilot Relief Setting
507 psi
-
-
Hydraulic Cycle Times
Rack Back
4.3 s
-
-
Raise
8.6 s
-
-
Dump
2.9 s
-
-
Lower
3.7 s
-
-
Lower Float Down
3.7 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
13.8 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow at 1,400 rpm
96.2 gpm
-
-
Relief Valve Setting - Steering
5004 psi
-
-
Total Steering Angle
70°
-
-
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
-
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Oscillation Angle
8.5°
-
-
Brakes
Brakes
ISO 3450: 2011
-
-
Service Refill Capacities
Fuel Tank
281 gal (US)
-
-
Cooling System
54.9 gal (US)
13.2 gal (US)
-
Engine Crankcase
20 gal (US)
-
-
Transmission
29.1 gal (US)
11.9 gal (US)
-
Differential - Final Drives - Front
71.6 gal (US)
10.6 gal (US)
-
Differential - Final Drives - Rear
68.9 gal (US)
10 gal (US)
-
Hydraulic System Factory Fill
210 gal (US)
-
-
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US)
-
-
Hydraulic Tank - Steering and Braking
34.9 gal (US)
-
-
Note
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
-
-
DEF Tank
-
4.2 gal (US)
-
Fuel Tank Size
-
76.6 gal (US)
-
Crankcase
-
4.8 gal (US)
-
Hydraulic Tank
-
29.6 gal (US)
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
-
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
-
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
17.2 ft
-
-
Ground to Top of Exhaust Stacks
16.6 ft
-
-
Ground to Top of Hood
12.7 ft
-
-
Ground to Bumper Clearance
3.5 ft
-
-
Rear Axle - Centerline to Bumper
12.5 ft
-
-
Front Axle Centerline to Bucket Tip
15.4 ft
-
-
Wheel Base
15.1 ft
-
-
Maximum Overall Length
42.9 ft
-
-
Ground to Lower Hitch Clearance
2 ft
-
-
Ground to Center of Front Axle
4.2 ft
-
-
Clearance at Maximum Lift
7.2 ft
-
-
Rack Back Angle at Ground Level
40.4°
-
-
Rack Back Angle at Carry
48.8°
-
-
B-Pin Height - Maximum Lift
19.7 ft
-
-
Maximum Overall Height - Bucket Raised
27.2 ft
-
-
Rack Angle at Maximum Lift
63.7°
-
-
Dump Angle at Maximum Lift
45°
-
-
Reach - Maximum Lift
7.2 ft
-
-
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
-
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
17.2 ft
-
-
Ground to Top of Exhaust Stacks
16.6 ft
-
-
Ground to Top of Hood
12.7 ft
-
-
Ground to Bumper Clearance
3.5 ft
-
-
Rear Axle - Centerline to Bumper
12.5 ft
-
-
Front Axle Centerline to Bucket Tip
17.8 ft
-
-
Wheel Base
15.1 ft
-
-
Maximum Overall Length
45.3 ft
-
-
Ground to Lower Hitch Clearance
2 ft
-
-
Ground to Center of Front Axle
4.2 ft
-
-
Clearance at Maximum Lift
14.8 ft
-
-
Rack Back Angle at Ground Level
39.9°
-
-
Rack Back Angle at Carry
49.3°
-
-
B-Pin Height - Maximum Lift
21.2 ft
-
-
Maximum Overall Height - Bucket Raised
28.7 ft
-
-
Rack Angle at Maximum Lift
60.6°
-
-
Dump Angle at Maximum Lift
51°
-
-
Reach - Maximum Lift
8.5 ft
-
-
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
-
-
Weights
Operating Weight
-
41554 lb
-
Buckets
Bucket Capacities
-
2.9-4.4 m³ (3.75-5.75 yd³)
-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
-
76 dB(A)*
-
Note (1)
-
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)
-
European Union Directive "2000/14/EC" as amended by "2005/88/EC."
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
-
73 dB(A)
-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)
-
For machines in European Union countries and in countries that adopt the EU Directives
-
With Cooling Fan Speed at Maximum Value - Note
-
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
-
107 LWA***
-
Note (3)
-
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
-
Note (2)
-
**For machines in European Union countries and in countries that adopt the "EU Directives."
-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
73 dB(A)
-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
-
109 dB(A)
-
Dimensions
Rack Back - Ground
-
40 degrees
-
Height - Top of Exhaust Pipe
-
11.17 ft
-
Centerline of Rear Axle to Hitch
-
5.42 ft
-
Lift Arm Clearance
-
12 ft
-
B-Pin Height
-
13.75 ft
-
Centerline of Rear Axle to Edge of Counterweight
-
6.75 ft
-
Ground Clearance
-
1.5 ft
-
Rack Back - Maximum Lift
-
60 degrees
-
Height - Top of Hood
-
8.75 ft
-
Wheel Base
-
10.83 ft
-
Height - Top of ROPS
-
11.33 ft
-
Rack Back - Carry
-
45 degrees
-
Note
-
All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
-
Weights and Operating Specifications
Note (2)
-
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Tipping Load - Full Turn - Rigid Tires**
-
25875 lb
-
Breakout Force
-
34638 lbf
-
Tipping Load - Full Turn - ISO 14397-1*
-
24264 lb
-
Note (3)
-
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
-
Operating Weight
-
41554 lb
-
Note (1)
-
For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
-
9.4 s
-
Steering System - Pump Type
-
Piston
-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)
-
4047 psi
-
Implement System - Maximum Pump Output at 2,390 rpm
