Engine meets Tier 4 Final/Stage V emission standards.
-
Rated Speed
1800 r/min
-
-
Gross Power - SAE J1995:2014
766 hp
-
-
Net Power - SAE J1349:2011 - Standard Ambient
699 hp
-
-
Net Power - SAE J1349:2011 - High Ambient
648 hp
-
-
Bore
5.4 in
3.85 in
-
Stroke
6 in
4.72 in
-
Displacement
1649.5 in³
220 in³
-
Peak Torque - 1,200 rpm
2624 lb/ft
-
-
Torque Rise
18 %
-
-
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Maximum Gross Power
-
110 hp
-
Rated Net Power - Rated Engine Speed
-
2200 r/min
-
Maximum Gross Power - Rated Engine Speed
-
1800 r/min
-
Rated Net Power - SAE J1349
-
99 hp
-
Maximum Gross Power - ISO 14396 (metric)
-
112 hp
-
Rated Net Power - ISO 9249
-
98 hp
-
Maximum Gross Torque - SAE J1995
-
335 ft·lbf
-
Maximum Gross Torque - ISO 14396
-
332 ft·lbf
-
Maximum Net Torque - SAE J1349
-
329 ft·lbf
-
Maximum Net Torque - ISO 9249
-
327 ft·lbf
-
Maximum Gross Power - ISO 14396
-
110 hp
-
Operating Specifications
Operating Weight - Standard
178517 lb
-
-
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
-
-
Rated Payload - Standard
17.5 ton (US)
-
-
Rated Payload - High Lift
17.5 ton (US)
-
-
Cat Truck Match - Standard
773-775
-
-
Cat Truck Match - High Lift
775-777
-
-
Transmission
Transmission Type
Cat planetary power shift
-
-
Forward - 1
4.6 mile/h
-
-
Forward - 2
8.2 mile/h
-
-
Forward - 3
14.5 mile/h
-
-
Reverse - 1
5.1 mile/h
-
-
Reverse - 2
9.1 mile/h
-
-
Reverse - 3
16 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8.2 mile/h
-
-
Direct Drive - Forward 3
14.5 mile/h
-
-
Direct Drive - Reverse 1
5.1 mile/h
-
-
Direct Drive - Reverse 2
9.1 mile/h
-
-
Direct Drive - Reverse 3
16 mile/h
-
-
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
-
Forward and Reverse - Speed Range 3
-
25 mile/h
-
Forward and Reverse - Speed Range 1*
-
6.3 mile/h
-
Forward and Reverse - Speed Range 2*
-
12.5 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive flow control
-
-
Lift/Tilt System
Variable displacement piston
-
-
Maximum Flow at 1,800 rpm
240 gpm
-
-
Relief Valve Setting - Lift/Tilt
4786 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
-
-
Pilot System
Open loop and pressure reducing
-
-
Pilot Relief Setting
507 psi
-
-
Hydraulic Cycle Times
Rack Back
4.3 s
-
-
Raise
8.6 s
-
-
Dump
2.9 s
-
-
Lower
3.7 s
-
-
Lower Float Down
3.7 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
13.8 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow at 1,400 rpm
96.2 gpm
-
-
Relief Valve Setting - Steering
5004 psi
-
-
Total Steering Angle
70°
-
-
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
Axles - Rear Center Differential
-
2 gal (US)
-
Hydraulic System - Including Tank
-
25.9 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
-
4.8 gal (US)
-
Hydraulic Tank
-
14.5 gal (US)
-
Axles - Front Center Differential
-
2 gal (US)
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
-
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
-
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
17.2 ft
-
-
Ground to Top of Exhaust Stacks
16.6 ft
-
-
Ground to Top of Hood
12.7 ft
-
-
Ground to Bumper Clearance
3.5 ft
-
-
Rear Axle - Centerline to Bumper
12.5 ft
-
-
Front Axle Centerline to Bucket Tip
15.4 ft
-
-
Wheel Base
15.1 ft
-
-
Maximum Overall Length
42.9 ft
-
-
Ground to Lower Hitch Clearance
2 ft
-
-
Ground to Center of Front Axle
4.2 ft
-
-
Clearance at Maximum Lift
7.2 ft
-
-
Rack Back Angle at Ground Level
40.4°
-
-
Rack Back Angle at Carry
48.8°
-
-
B-Pin Height - Maximum Lift
19.7 ft
-
-
Maximum Overall Height - Bucket Raised
27.2 ft
-
-
Rack Angle at Maximum Lift
63.7°
-
-
Dump Angle at Maximum Lift
45°
-
-
Reach - Maximum Lift
7.2 ft
-
-
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
-
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
17.2 ft
-
-
Ground to Top of Exhaust Stacks
16.6 ft
-
-
Ground to Top of Hood
12.7 ft
-
-
Ground to Bumper Clearance
3.5 ft
-
-
Rear Axle - Centerline to Bumper
12.5 ft
-
-
Front Axle Centerline to Bucket Tip
17.8 ft
-
-
Wheel Base
15.1 ft
-
-
Maximum Overall Length
45.3 ft
-
-
Ground to Lower Hitch Clearance
2 ft
-
-
Ground to Center of Front Axle
4.2 ft
-
-
Clearance at Maximum Lift
14.8 ft
-
-
Rack Back Angle at Ground Level
39.9°
-
-
Rack Back Angle at Carry
49.3°
-
-
B-Pin Height - Maximum Lift
21.2 ft
-
-
Maximum Overall Height - Bucket Raised
28.7 ft
-
-
Rack Angle at Maximum Lift
60.6°
-
-
Dump Angle at Maximum Lift
51°
-
-
Reach - Maximum Lift
8.5 ft
-
-
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
-
-
Weights
Operating Weight
-
19103 lb
-
Buckets
Bucket Capacities
-
1.3-3.5 m3 (1.7-4.6 yd3)
-
Bucket Capacities - General Purpose
-
1.3-1.9 m³ (1.7-2.5 yd³)
-
Bucket Capacities - Light Material
-
2.5-3.5 m³ (3.3-4.6 yd³)
-
Sustainability
Recyclability
-
95%
-
Cab
ROPS
-
ISO 3471:2008
-
FOPS
-
ISO 3449:2005
-
Note (4)
-
*The measurements were conducted with the cab doors and windows closed.
-
Note (2)
-
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
Note (3)
-
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
Note (1)
-
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
Steering
Maximum Flow - Steering Pump
-
22 gpm
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
-
3.75 turns
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
-
2.8 s
-
Maximum Working Pressure - Steering Pump
-
3263 psi
-
Steering Articulation Angle - Each Direction
-
40 °
-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
-
3046 psi
-
Maximum Flow - Implement Pump
-
39 gpm
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
-
24 gpm
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
-
3046 psi
-
Hydraulic Cycle Time - Total Cycle Time
-
12.5 s
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
-
5.2 s
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
-
24 gpm
-
Hydraulic Cycle Time - Dump, at Maximum Reach
-
1.4 s
-
Relief Pressure - Tilt Cylinder
-
4931 psi
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
-
32 gpm
-
Maximum Working Pressure - Implement Pump
-
4061 psi
-
Hydraulic Cycle Time - Rackback
-
2.2 s
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
