Compare

Compare Equipment Go Back

Engine
	990 Wheel Loader View Product	995 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	986 Wheel Loader View Product Remove	914 Compact Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	752 hp	-	-	449 hp	-
Engine Model	Cat® C27	Cat® 3516E	Cat C3.6	Cat® C15	Cat C3.6
Emissions	Option 2 - Emits equivalent to U.S. EPA Tier 2	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.	-	Engine meets Tier 4 Final/Stage V emission standards.
Rated Speed	1800 r/min	-	-	2000	-
Gross Power - SAE J1995:2014	766 hp	1870 hp	-	456 hp	-
Net Power - SAE J1349:2011 - Standard Ambient	699 hp	-	-	-	-
Net Power - SAE J1349:2011 - High Ambient	648 hp	-	-	-	-
Bore	5.4 in	6.7 in	3.85 in	5.4 in	3.85 in
Stroke	6 in	8.5 in	4.72 in	6.75 in	4.72 in
Displacement	1649.5 in³	4766 in³	220 in³	927 in²	220 in³
Peak Torque - 1,200 rpm	2624 lb/ft	-	-	-	-
Torque Rise	18 %	39%	-	16%	-
Note	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Engine Power - ISO 14396	-	1847 hp	-	-	-
Net Power - SAE J1349 - Standard Ambient	-	1739 hp	-	-	-
Net Power - SAE J1349 - High Ambient	-	1696 hp	-	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-	-	-
Note (1)	-	The power ratings apply when tested under the reference conditions for the specified standard.	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-
Note (2)	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-
Note (3)	-	The gross power advertised is with the fan at maximum speed.	-	-	-
Maximum Gross Power	-	-	121 hp	-	110 hp
Rated Net Power - Rated Engine Speed	-	-	2200 r/min	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	-	2200 r/min	-	1800 r/min
Rated Net Power - SAE J1349	-	-	120 hp	-	99 hp
Maximum Gross Power - ISO 14396 (metric)	-	-	122 hp	-	112 hp
Rated Net Power - ISO 9249	-	-	118 hp	-	98 hp
Maximum Gross Torque - SAE J1995	-	-	372 ft·lbf	-	335 ft·lbf
Maximum Gross Torque - ISO 14396	-	-	369 ft·lbf	-	332 ft·lbf
Maximum Net Torque - SAE J1349	-	-	366 ft·lbf	-	329 ft·lbf
Maximum Net Torque - ISO 9249	-	-	363 ft·lbf	-	327 ft·lbf
Maximum Gross Power - ISO 14396	-	-	121 hp	-	110 hp
Peak Power Speed	-	-	-	1600	-
Net Power - SAE J1349:2011	-	-	-	373 hp	-
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	373 hp	-
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	373 hp	-
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	1778 lb/ft	-
Operating Specifications
Operating Weight - Standard	178517 lb	543772 lb	-	97785 lb	-
Bucket Capacity Range	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	17.2-43.6 m3 (22.3-57 yd3)	-	5.0-10.3 m³ (6.5-13.5 yd³)	-
Rated Payload - Standard	17.5 ton (US)	-	-	-	-
Rated Payload - High Lift	17.5 ton (US)	-	-	-	-
Cat Truck Match - Standard	773-775	785/789	-	770/735/740/745	-
Cat Truck Match - High Lift	775-777	789/793/794	-	772/773	-
Operating Weight - High Lift	-	547675 lb	-	104005 lb	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-	-
Rated Payload - Standard (Quarry Face)	-	-	-	11 ton (US)	-
Rated Payload - Loose Material (Standard)	-	-	-	14 ton (US)	-
Rated Payload - High Lift (Quarry Face)	-	-	-	11 ton (US)	-
Rated Payload - Loose Material (High Lift)	-	-	-	12.1 ton (US)	-
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Power Shift	-	Cat planetary power shift	-
Forward - 1	4.6 mile/h	4.6 mile/h	-	5 mile/h	-
Forward - 2	8.2 mile/h	8 mile/h	-	8 mile/h	-
Forward - 3	14.5 mile/h	13.6 mile/h	-	-	-
Reverse - 1	5.1 mile/h	5 mile/h	-	5 mile/h	-
Reverse - 2	9.1 mile/h	8.8 mile/h	-	8 mile/h	-
Reverse - 3	16 mile/h	14.9 mile/h	-	-	-
Direct Drive - Forward 1	Lock-up disabled	Lock-up disables	-	-	-
Direct Drive - Forward 2	8.2 mile/h	8.7 mile/h	-	8 mile/h	-
Direct Drive - Forward 3	14.5 mile/h	15.2 mile/h	-	14 mile/h	-
Direct Drive - Reverse 1	5.1 mile/h	Lock-up disables	-	-	-
Direct Drive - Reverse 2	9.1 mile/h	9.6 mile/h	-	9 mile/h	-
Direct Drive - Reverse 3	16 mile/h	16.8 mile/h	-	16 mile/h	-
Note	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3	-	-	25 mile/h	-	25 mile/h
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h	-	12.5 mile/h
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h	-	6.3 mile/h
Direct Drive - Forward 4	-	-	-	24 mile/h	-
Direct Drive - Reverse 4	-	-	-	25.4 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive flow control	Positive Flow Control	-	Load Sense	-
Lift/Tilt System	Variable displacement piston	-	-	-	-
Maximum Flow at 1,800 rpm	240 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4786 psi	5004 psi	-	4050 psi	-
Cylinders, Double Acting - Lift, Bore and Stroke	235 mm × 1287 mm (9.3 in × 50.7 in)	370 × 1713 mm (14.6 × 67.4 in)	-	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	292.1 mm × 820 mm (11.5 in × 32.3 in)	310 × 1086 mm (12.2 × 42.8 in)	-	-	-
Pilot System	Open loop and pressure reducing	Open Loop and Pressure Reducing	-	-	-
Pilot Relief Setting	507 psi	-	-	-	-
Lift/Tilt System - Pump	-	Variable Displacement Piston	-	2 × 110 cc variable displacement	-
Maximum Flow at 1,700 rpm Engine Speed	-	541 gpm	-	-	-
Maximum Flow at 2,165 rpm	-	-	-	123 gpm	-
Lift Cylinder - Bore	-	-	-	7.5 in	-
Lift Cylinder - Stroke	-	-	-	45 in	-
Tilt Cylinder - Bore	-	-	-	6.7 in	-
Tilt Cylinder - Stroke	-	-	-	28.4 in	-
Hydraulic Cycle Times
Rack Back	4.3 s	4.9 s	-	4.5 s	-
Raise	8.6 s	12.6 s	-	9 s	-
Dump	2.9 s	3.1 s	-	3.5 s	-
Lower	3.7 s	-	-	5.2 s	-
Lower Float Down	3.7 s	4.2 s	-	4.3 s	-
Total Hydraulic Cycle Time - Empty Bucket	13.8 s	-	-	-	-
Total Hydraulic Cycle Time	-	-	-	21.3 s	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	-	Load Sense	-
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	-	Piston, variable displacement	-
Maximum Flow at 1,400 rpm	96.2 gpm	-	-	52 gpm	-
Relief Valve Setting - Steering	5004 psi	-	-	-	-
Total Steering Angle	70°	80 degrees	-	70°	-
Steering Cycle Times - Low Idle	-	7.6 s	-	-	-
Steering Cycle Times - High Idle	-	4.3 s	-	-	-
Steering Cut Off Pressure	-	-	-	4000 psi	-
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-
Axles
Front	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed	Fixed; Locking differential (standard)
Rear	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)
Oscillation Angle	8.5°	9°	-	±12.5°	-
Oscillation Angle - Chain Arrangement	-	-	-	±8.5°	-
Brakes
Brakes	ISO 3450: 2011	ISO 3450:2011	-	ISO 3450:2011	-
Service Refill Capacities
Fuel Tank	281 gal (US)	-	43.6 gal (US)	141 gal (US)	43.6 gal (US)
Cooling System	54.9 gal (US)	-	5.7 gal (US)	-	5.7 gal (US)
Engine Crankcase	20 gal (US)	-	2.6 gal (US)	-	2.6 gal (US)
Transmission	29.1 gal (US)	-	0.8 gal (US)	20 gal (US)	0.8 gal (US)
Differential - Final Drives - Front	71.6 gal (US)	-	-	-	-
Differential - Final Drives - Rear	68.9 gal (US)	-	-	-	-
Hydraulic System Factory Fill	210 gal (US)	-	-	87 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	68.9 gal (US)	-	-	-	-
Hydraulic Tank - Steering and Braking	34.9 gal (US)	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear	-	-	4.5 gal (US)	-	-
Hydraulic System - Including Tank	-	-	25.9 gal (US)	-	25.9 gal (US)
Hydraulic Tank	-	-	14.5 gal (US)	-	14.5 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)	-	4.8 gal (US)
Axles - Front	-	-	4.5 gal (US)	-	-
Fuel Tank - Short Lift	-	-	-	127 gal (US)	-
Cooling Systems	-	-	-	26 gal (US)	-
Crankcase	-	-	-	9 gal (US)	-
Diesel Exhaust Fluid Tank	-	-	-	6 gal (US)	-
Axle Oil - Differentials and Final Drives - Front	-	-	-	49 gal (US)	-
Axle Oil - Differentials and Final Drives - Rear	-	-	-	45 gal (US)	-
Hydraulic System - Tank Only	-	-	-	34 gal (US)	-
Axles - Rear Center Differential	-	-	-	-	2 gal (US)
Axles - Front Center Differential	-	-	-	-	2 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	73 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	113 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Machine Sound Power Level (ISO 6395:2008)**	-	-	-	110 dB(A)	-
Note (5)	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-	-
Note (1)	*Sound suppression equipped	-	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	13.3 ft	-
Ground to Top of Hood	12.7 ft	-	-	10.7 ft	-
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	10.3 ft	-
Front Axle Centerline to Bucket Tip	15.4 ft	-	-	13.8 ft	-
Wheel Base	15.1 ft	-	-	12.5 ft	-
Maximum Overall Length	42.9 ft	-	-	36.6 ft	-
Ground to Lower Hitch Clearance	2 ft	-	-	1.5 ft	-
Ground to Center of Front Axle	4.2 ft	-	-	3.2 ft	-
Clearance at Maximum Lift	7.2 ft	-	-	10.1 ft	-
Rack Back Angle at Ground Level	40.4°	-	-	-	-
Rack Back Angle at Carry	48.8°	-	-	-	-
B-Pin Height - Maximum Lift	19.7 ft	-	-	16.1 ft	-
Maximum Overall Height - Bucket Raised	27.2 ft	-	-	22.4 ft	-
Rack Angle at Maximum Lift	63.7°	-	-	-	-
Dump Angle at Maximum Lift	45°	-	-	-	-
Reach - Maximum Lift	7.2 ft	-	-	7.1 ft	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	13.3 ft	-
Ground to Top of Hood	12.7 ft	-	-	10.7 ft	-
Ground to Bumper Clearance	3.5 ft	-	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	10.3 ft	-
Front Axle Centerline to Bucket Tip	17.8 ft	-	-	15.3 ft	-
Wheel Base	15.1 ft	-	-	12.5 ft	-
Maximum Overall Length	45.3 ft	-	-	38 ft	-
Ground to Lower Hitch Clearance	2 ft	-	-	1.5 ft	-
Ground to Center of Front Axle	4.2 ft	-	-	3.2 ft	-
Clearance at Maximum Lift	14.8 ft	-	-	11.6 ft	-
Rack Back Angle at Ground Level	39.9°	-	-	-	-
Rack Back Angle at Carry	49.3°	-	-	-	-
B-Pin Height - Maximum Lift	21.2 ft	-	-	17.6 ft	-
Maximum Overall Height - Bucket Raised	28.7 ft	-	-	23.9 ft	-
Rack Angle at Maximum Lift	60.6°	-	-	-	-
Dump Angle at Maximum Lift	51°	-	-	-	-
Reach - Maximum Lift	8.5 ft	-	-	7.4 ft	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-	-	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-	-	-
Cooling System	-	138 gal (US)	-	-	-
Engine Crankcase	-	76 gal (US)	-	-	-
Transmission	-	110 gal (US)	-	-	-
Differential - Final Drives - Front	-	220 gal (US)	-	-	-
Differential - Final Drives - Rear	-	200 gal (US)	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-	-	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-	-	-
Oil Renewal System (ORS)*	-	20 gal (US)	-	-	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-	-	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-	-	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-	-	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	-	-	-
Clearance at Maximum Lift	-	19.8 ft	-	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-	-
Front Axle Centerline to Bucket Tip	-	21.9 ft	-	-	-
Ground to Bumper Clearance	-	4.4 ft	-	-	-
Ground to Center of Axles	-	6 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-	-	-
Ground to Top of Hood	-	18.6 ft	-	-	-
Ground to Top of ROPS	-	23.4 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	39.3 ft	-	-	-
Maximum Overall Length	-	64.6 ft	-	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-	-
Rack Angle at Maximum Lift	-	59.5 degrees	-	-	-
Rack Back Angle - Carry	-	47.7 degrees	-	-	-
Rack Back Angle - Ground Level	-	39.7 degrees	-	-	-
Reach - Maximum Lift	-	9.6 ft	-	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-	-	-
Tread Width	-	14.1 ft	-	-	-
Wheel Base	-	22.3 ft	-	-	-
Width - Over Tires - With Bulge	-	18.8 ft	-	-	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	-	-	-
Clearance at Maximum Lift	-	22.6 ft	-	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-	-
Front Axle Centerline to Bucket Tip	-	24.2 ft	-	-	-
Ground to Bumper Clearance	-	4.4 ft	-	-	-
Ground to Center of Axles	-	6 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-	-	-
Ground to Top of Hood	-	18.6 ft	-	-	-
Ground to Top of ROPS	-	23.4 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	42.1 ft	-	-	-
Maximum Overall Length	-	66.9 ft	-	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-	-
Rack Angle at Maximum Lift	-	59.4 degrees	-	-	-
Rack Back Angle - Carry	-	53.5 degrees	-	-	-
Rack Back Angle - Ground Level	-	45 degrees	-	-	-
Reach - Maximum Lift	-	9.4 ft	-	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-	-	-
Tread Width	-	14.1 ft	-	-	-
Wheel Base	-	22.3 ft	-	-	-
Width - Over Tires - With Bulge	-	18.8 ft	-	-	-
Weights
Operating Weight	-	-	21742 lb	-	19103 lb
Buckets
Bucket Capacities	-	-	1.3-3.5 m3 (1.7-4.6 yd3)	-	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-	2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
Recyclability	-	-	95%	-	95%
Cab
ROPS	-	-	ISO 3471:2008	-	ISO 3471:2008
FOPS	-	-	ISO 3449:2005	-	ISO 3449:2005
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.	-	*The measurements were conducted with the cab doors and windows closed.
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	43.6 gpm	-	39 gpm
Relief Pressure - Tilt Cylinder	-	-	4641 psi	-	4931 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	25 gpm	-	24 gpm
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	4641 psi	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	2.7 s	-	3.7 s
Note	-	-	All cycle times listed are with cylinder snubbing turned off.	-	-
Maximum Working Pressure - Implement Pump	-	-	4061 psi	-	4061 psi
Hydraulic Cycle Time - Total Cycle Time	-	-	11.5 s	-	12.5 s
Hydraulic Cycle Time - Rackback	-	-	2.2 s	-	2.2 s
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.8 s	-	1.4 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	4.8 s	-	5.2 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	40 gpm	-	32 gpm
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	25 gpm	-	-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	-	-	3046 psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	-	-	3046 psi
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	-	-	24 gpm
Steering
Maximum Working Pressure - Steering Pump	-	-	3190 psi	-	3263 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	2.3 s	-	2.8 s
Steering Articulation Angle - Each Direction	-	-	40 °	-	40 °
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.4 turns	-	3.75 turns
Maximum Flow - Steering Pump	-	-	21.7 gpm	-	22 gpm
Tires
Other Choices Include	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size	-	-	17.5 R25 L2 XTLA	-	17.5 R25 L2 XTLA
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.	-	Other tire choices are available. Contact your Cat dealer for details.
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Operator's Cab
ROPS/FOPS	-	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	74 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	-	-	-	113 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	73 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	-	-	-	110 dB(A)	-
Note (1)	-	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-
Note (2)	-	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-
Note (3)	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (5)	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
Reach at Maximum Lift	-	-	-	8 ft	-
Clearance at Maximum Lift	-	-	-	10.7 ft	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-
Maximum Overall Height, Bucket Raised	-	-	-	20.9 ft	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	35 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	12.2 ft	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	35.4 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	12.6 ft	-

Compare Equipment Go Back

990 Wheel Loader

995 Wheel Loader

920 Compact Wheel Loader

986 Wheel Loader

914 Compact Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Buckets

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Operator's Cab

Sound Performance - Tier 3 / Stage IIIA

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork