CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    990 Wheel Loader
    View Product
    995 Wheel Loader
    View Product Remove
    903D Compact Wheel Loader
    View Product Remove
    920 Compact Wheel Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 752 hp - - -
    Engine Model Cat® C27 Cat® 3516E Cat C2.4* Cat C3.6
    Emissions Option 2 - Emits equivalent to U.S. EPA Tier 2 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent - Engine meets Tier 4 Final/Stage V emission standards.
    Rated Speed 1800 r/min - - -
    Gross Power - SAE J1995:2014 766 hp 1870 hp - -
    Net Power - SAE J1349:2011 - Standard Ambient 699 hp - - -
    Net Power - SAE J1349:2011 - High Ambient 648 hp - - -
    Bore 5.4 in 6.7 in 3.4 in 3.85 in
    Stroke 6 in 8.5 in 4 in 4.72 in
    Displacement 1649.5 in³ 4766 in³ 147 in² 220 in³
    Peak Torque - 1,200 rpm 2624 lb/ft - - -
    Torque Rise 18 % 39% - -
    Note Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator. - *Engine meets U.S. EPA Tier 4 Final emission standards. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Engine Power - ISO 14396 - 1847 hp - -
    Net Power - SAE J1349 - Standard Ambient - 1739 hp - -
    Net Power - SAE J1349 - High Ambient - 1696 hp - -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft - -
    Note (1) - The power ratings apply when tested under the reference conditions for the specified standard. - -
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. - -
    Note (3) - The gross power advertised is with the fan at maximum speed. - -
    Maximum Gross Power - - 42 hp 121 hp
    Gross Power - - 42 hp -
    Net Power - 2,200 rpm - SAE J1349 R-ing - - 40 hp -
    Net Power - 2,200 rpm - ISO 9249 R-ing - - 40 hp -
    Rated Net Power - Rated Engine Speed - - - 2200 r/min
    Maximum Gross Power - Rated Engine Speed - - - 2200 r/min
    Rated Net Power - SAE J1349 - - - 120 hp
    Maximum Gross Power - ISO 14396 (metric) - - - 122 hp
    Rated Net Power - ISO 9249 - - - 118 hp
    Maximum Gross Torque - SAE J1995 - - - 372 ft·lbf
    Maximum Gross Torque - ISO 14396 - - - 369 ft·lbf
    Maximum Net Torque - SAE J1349 - - - 366 ft·lbf
    Maximum Net Torque - ISO 9249 - - - 363 ft·lbf
    Maximum Gross Power - ISO 14396 - - - 121 hp

    Operating Specifications
    Operating Weight - Standard 178517 lb 543772 lb - -
    Bucket Capacity Range 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 17.2-43.6 m3 (22.3-57 yd3) - -
    Rated Payload - Standard 17.5 ton (US) - - -
    Rated Payload - High Lift 17.5 ton (US) - - -
    Cat Truck Match - Standard 773-775 785/789 - -
    Cat Truck Match - High Lift 775-777 789/793/794 - -
    Operating Weight - High Lift - 547675 lb - -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -

    Transmission
    Transmission Type Cat planetary power shift Cat Planetary Power Shift - -
    Forward - 1 4.6 mile/h 4.6 mile/h - -
    Forward - 2 8.2 mile/h 8 mile/h - -
    Forward - 3 14.5 mile/h 13.6 mile/h - -
    Reverse - 1 5.1 mile/h 5 mile/h - -
    Reverse - 2 9.1 mile/h 8.8 mile/h - -
    Reverse - 3 16 mile/h 14.9 mile/h - -
    Direct Drive - Forward 1 Lock-up disabled Lock-up disables - -
    Direct Drive - Forward 2 8.2 mile/h 8.7 mile/h - -
    Direct Drive - Forward 3 14.5 mile/h 15.2 mile/h - -
    Direct Drive - Reverse 1 5.1 mile/h Lock-up disables - -
    Direct Drive - Reverse 2 9.1 mile/h 9.6 mile/h - -
    Direct Drive - Reverse 3 16 mile/h 16.8 mile/h - -
    Note Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. Travel speeds based on 58/85-57 tires. - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
    Travel Speed - - 12.4 mile/h -
    Forward and Reverse - Speed Range 3 - - - 25 mile/h
    Forward and Reverse - Speed Range 2* - - - 12.5 mile/h
    Forward and Reverse - Speed Range 1* - - - 6.3 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive flow control Positive Flow Control - -
    Lift/Tilt System Variable displacement piston - - -
    Maximum Flow at 1,800 rpm 240 gpm - - -
    Relief Valve Setting - Lift/Tilt 4786 psi 5004 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke 235 mm × 1287 mm (9.3 in × 50.7 in) 370 × 1713 mm (14.6 × 67.4 in) - -
    Cylinders, Double Acting - Tilt, Bore and Stroke 292.1 mm × 820 mm (11.5 in × 32.3 in) 310 × 1086 mm (12.2 × 42.8 in) - -
    Pilot System Open loop and pressure reducing Open Loop and Pressure Reducing - -
    Pilot Relief Setting 507 psi - - -
    Lift/Tilt System - Pump - Variable Displacement Piston - -
    Maximum Flow at 1,700 rpm Engine Speed - 541 gpm - -

    Hydraulic Cycle Times
    Rack Back 4.3 s 4.9 s - -
    Raise 8.6 s 12.6 s - -
    Dump 2.9 s 3.1 s - -
    Lower 3.7 s - - -
    Lower Float Down 3.7 s 4.2 s - -
    Total Hydraulic Cycle Time - Empty Bucket 13.8 s - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing Pilot, Load Sensing - -
    Steering System - Pump Piston, variable displacement Piston, Variable Displacement - -
    Maximum Flow at 1,400 rpm 96.2 gpm - - -
    Relief Valve Setting - Steering 5004 psi - - -
    Total Steering Angle 70° 80 degrees - -
    Steering Cycle Times - Low Idle - 7.6 s - -
    Steering Cycle Times - High Idle - 4.3 s - -

    Air Conditioning System
    Air Conditioning • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c - - -

    Axles
    Front Fixed Fixed - Fixed; Locking differential (standard)
    Rear Trunnion Trunnion - Oscillating ±11 degrees; Locking differential (standard)
    Oscillation Angle 8.5° 9° - -

    Brakes
    Brakes ISO 3450: 2011 ISO 3450:2011 - -

    Service Refill Capacities
    Fuel Tank 281 gal (US) - 11.4 gal (US) 43.6 gal (US)
    Cooling System 54.9 gal (US) - 3 gal (US) 5.7 gal (US)
    Engine Crankcase 20 gal (US) - - 2.6 gal (US)
    Transmission 29.1 gal (US) - - 0.8 gal (US)
    Differential - Final Drives - Front 71.6 gal (US) - - -
    Differential - Final Drives - Rear 68.9 gal (US) - - -
    Hydraulic System Factory Fill 210 gal (US) - - -
    Hydraulic Tank - Implement and Hydraulic Fan 68.9 gal (US) - - -
    Hydraulic Tank - Steering and Braking 34.9 gal (US) - - -
    Note Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este - - DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Hydraulic System - - 6.3 gal (US) -
    Engine Oil - - 2.4 gal (US) -
    Axles - Rear - - - 4.5 gal (US)
    Hydraulic System - Including Tank - - - 25.9 gal (US)
    Hydraulic Tank - - - 14.5 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.8 gal (US)
    Axles - Front - - - 4.5 gal (US)

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 116 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)* 114 dB(A) - - -
    Note (1) *Sound suppression equipped - - -
    Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - -
    Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - -
    Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Sound Performance - Tier 2
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 116 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)* 114 dB(A) - - -
    Note (1) *Sound suppression equipped - - -
    Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - -
    Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - -
    Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS 17.2 ft - - -
    Ground to Top of Exhaust Stacks 16.6 ft - - -
    Ground to Top of Hood 12.7 ft - - -
    Ground to Bumper Clearance 3.5 ft - - -
    Rear Axle - Centerline to Bumper 12.5 ft - - -
    Front Axle Centerline to Bucket Tip 15.4 ft - - -
    Wheel Base 15.1 ft - - -
    Maximum Overall Length 42.9 ft - - -
    Ground to Lower Hitch Clearance 2 ft - - -
    Ground to Center of Front Axle 4.2 ft - - -
    Clearance at Maximum Lift 7.2 ft - - -
    Rack Back Angle at Ground Level 40.4° - - -
    Rack Back Angle at Carry 48.8° - - -
    B-Pin Height - Maximum Lift 19.7 ft - - -
    Maximum Overall Height - Bucket Raised 27.2 ft - - -
    Rack Angle at Maximum Lift 63.7° - - -
    Dump Angle at Maximum Lift 45° - - -
    Reach - Maximum Lift 7.2 ft - - -
    Note Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. - - -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS 17.2 ft - - -
    Ground to Top of Exhaust Stacks 16.6 ft - - -
    Ground to Top of Hood 12.7 ft - - -
    Ground to Bumper Clearance 3.5 ft - - -
    Rear Axle - Centerline to Bumper 12.5 ft - - -
    Front Axle Centerline to Bucket Tip 17.8 ft - - -
    Wheel Base 15.1 ft - - -
    Maximum Overall Length 45.3 ft - - -
    Ground to Lower Hitch Clearance 2 ft - - -
    Ground to Center of Front Axle 4.2 ft - - -
    Clearance at Maximum Lift 14.8 ft - - -
    Rack Back Angle at Ground Level 39.9° - - -
    Rack Back Angle at Carry 49.3° - - -
    B-Pin Height - Maximum Lift 21.2 ft - - -
    Maximum Overall Height - Bucket Raised 28.7 ft - - -
    Rack Angle at Maximum Lift 60.6° - - -
    Dump Angle at Maximum Lift 51° - - -
    Reach - Maximum Lift 8.5 ft - - -
    Note Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. - - -

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) - -
    Cooling System - 138 gal (US) - -
    Engine Crankcase - 76 gal (US) - -
    Transmission - 110 gal (US) - -
    Differential - Final Drives - Front - 220 gal (US) - -
    Differential - Final Drives - Rear - 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) - -
    Hydraulic Tank - Steering and Braking - 100 gal (US) - -
    Oil Renewal System (ORS)* - 20 gal (US) - -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) - -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) - -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft - -
    Clearance at Maximum Lift - 19.8 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 21.9 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 39.3 ft - -
    Maximum Overall Length - 64.6 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.5 degrees - -
    Rack Back Angle - Carry - 47.7 degrees - -
    Rack Back Angle - Ground Level - 39.7 degrees - -
    Reach - Maximum Lift - 9.6 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft - -
    Clearance at Maximum Lift - 22.6 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 24.2 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 42.1 ft - -
    Maximum Overall Length - 66.9 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.4 degrees - -
    Rack Back Angle - Carry - 53.5 degrees - -
    Rack Back Angle - Ground Level - 45 degrees - -
    Reach - Maximum Lift - 9.4 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Weights
    Operating Weight - - 9414 lb 21742 lb

    Buckets
    Bucket Capacities - - 0.6-1.0 m3 (0.8-1.3 yd3) 1.3-3.5 m3 (1.7-4.6 yd3)
    Bucket Capacities - General Purpose - - 0.6 m3 (0.8 yd3) 1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material - - 1.0 m3 (1.3 yd3) 2.5-3.5 m³ (3.3-4.6 yd³)

    Hydraulic System
    Main Relief - - 3481 psi -
    3rd Auxiliary Flow - - 14 gpm -
    Hydraulic Cycle Time - Lower, Float - - 2.4 s -

    Loader Hydraulic System
    Hydraulic Cycle Time - Lift - - 4.4 s -
    Hydraulic Cycle Time - Dump - - 0.7 s -
    Maximum Flow - Implement Pump - - - 43.6 gpm
    Relief Pressure - Tilt Cylinder - - - 4641 psi
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard - - - 25 gpm
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure - - - 4641 psi
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level - - - 2.7 s
    Note - - - All cycle times listed are with cylinder snubbing turned off.
    Maximum Working Pressure - Implement Pump - - - 4061 psi
    Hydraulic Cycle Time - Total Cycle Time - - - 11.5 s
    Hydraulic Cycle Time - Rackback - - - 2.2 s
    Hydraulic Cycle Time - Dump, at Maximum Reach - - - 1.8 s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift - - - 4.8 s
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High - - - 40 gpm
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow - - - 25 gpm

    Cab
    ROPS - - ISO 3471:2008 ISO 3471:2008
    FOPS - - ISO 3449:2005 Level I ISO 3449:2005
    Note (3) - - - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (2) - - - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (1) - - - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (4) - - - *The measurements were conducted with the cab doors and windows closed.

    Dimensions (Approximate) - Standard Lift
    Cab Height - - 8.25 ft -
    Ground Clearance - - 10 in -
    Wheel Base - - 6.42 ft -
    Overall Length - With Bucket* - - 15.75 ft -
    Reach at Maximum Dump Height* - - 2.33 ft -
    Dig Depth - - 6 in -
    Maximum Dump Height* - - 7.5 ft -
    Load Over Height - - 9.17 ft -
    Hinge Pin at Maximum Height - - 10.08 ft -
    Departure Angle - Degrees - - 30° -
    Overall Length - With Forks - - 17.08 ft -
    Reach - Ground Level - - 2.67 ft -
    Maximum Reach - - 4.5 ft -
    Fork Depth Above Ground - - 2 in -
    Fork Height at Maximum Reach - - 4.67 ft -
    Maximum Fork Height - - 9.83 ft -
    Fork Reach at Maximum Height - - 2 ft -
    Turning Radius - Over Bucket* - - 13.17 ft -
    Turning Radius - Inside Tire** - - 5.92 ft -
    Width - Over Bucket* - - 5.83 ft -
    Tire Gauge - - 4.33 ft -
    Machine Width** - - 5.58 ft -
    Articulation Angle - - 40° -
    Steering Angle - - 80° -
    Dump Angle at Maximum Height - - 40° -
    Note (1) - - *Vary with bucket size. -
    Note (2) - - **Vary with tire size. -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. -

    Dimensions (Approximate) - High Lift
    Cab Height - - 8.25 ft -
    Ground Clearance - - 10 in -
    Wheel Base - - 6.42 ft -
    Overall Length - With Bucket* - - 16.17 ft -
    Reach at Maximum Dump Height* - - 2.42 ft -
    Dig Depth - - 8 in -
    Maximum Dump Height* - - 8 ft -
    Load Over Height - - 9.67 ft -
    Hinge Pin at Maximum Height - - 10.58 ft -
    Departure Angle - Degrees - - 30° -
    Overall Length - With Forks - - 17.58 ft -
    Reach - Ground Level - - 3.25 ft -
    Maximum Reach - - 4.92 ft -
    Fork Depth Above Ground - - 2 in -
    Fork Height at Maximum Reach - - 4.67 ft -
    Maximum Fork Height - - 10.33 ft -
    Fork Reach at Maximum Height - - 2 ft -
    Turning Radius - Over Bucket* - - 13.42 ft -
    Turning Radius - Inside Tire** - - 5.92 ft -
    Width - Over Bucket* - - 5.83 ft -
    Tire Gauge - - 4.33 ft -
    Machine Width** - - 5.58 ft -
    Articulation Angle - - 40° -
    Steering Angle - - 80° -
    Dump Angle at Maximum Height - - 40° -
    Note (1) - - *Vary with bucket size. -
    Note (2) - - **Vary with tire size. -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. -

    Operating Specifications - Standard Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR -
    Rated Bucket Capacity - - 0.8 yd³ -
    Breakout Force - - 6160 lbf -
    Operating Weight - - 9414 lb -
    Rated Operating Load at Full Turn - Bucket*** - - 2701 lb -
    Straight Tipping Load - Bucket*** - - 6415 lb -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5401 lb -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5512 lb -
    Rack Back - Transport Position - - 51° -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3366 lb -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2524 lb -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. -
    Note (3) - - ***Manual quick coupler, precleaner hood. -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. -

    Operating Specifications - High Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR -
    Rated Bucket Capacity - - 0.8 yd³ -
    Breakout Force - - 6204 lbf -
    Operating Weight - - 9462 lb -
    Rated Operating Load at Full Turn - Bucket*** - - 2502 lb -
    Straight Tipping Load - Bucket*** - - 5975 lb -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5004 lb -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5115 lb -
    Rack Back - Transport Position - - 51° -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3148 lb -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2361 lb -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. -
    Note (3) - - ***Manual quick coupler, precleaner hood. -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. -

    Maximum Material Densities - General Purpose
    Bucket Type - - General Purpose -
    Rated Capacity - - 0.8 yd³ -
    Dump Height - - 90 in -
    Maximum Material Density - - 3169 lb/yd³ -
    Bucket Width - - 70 in -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. -

    Maximum Material Densities - Light Material
    Bucket Type - - Light Material -
    Rated Capacity - - 1.3 yd³ -
    Dump Height - - 85 in -
    Maximum Material Density - - 1989 lb/yd³ -
    Bucket Width - - 74 in -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. -

    Sustainability
    Recyclability - - 97% 95%

    Steering
    Maximum Working Pressure - Steering Pump - - - 3190 psi
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed - - - 2.3 s
    Steering Articulation Angle - Each Direction - - - 40 °
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - - - 3.4 turns
    Maximum Flow - Steering Pump - - - 21.7 gpm

    Tires
    Other Choices Include - - - 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
    Standard Size - - - 17.5 R25 L2 XTLA
    Note (1) - - - Other tire choices are available. Contact your Cat dealer for details.
    Note (3) - - - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2) - - - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Add a Similar Product:
    • 992 Wheel Loader Add
    • 988 GC Wheel Loader Add
    • 988 XE Wheel Loader Add
    • 988 Wheel Loader Add
    • 950 GC Wheel Loader | Front Loader Add
    • 986 Wheel Loader Add
    • 914 Compact Wheel Loader Add
    • 910 Compact Wheel Loader Add