Compare Equipment Go Back
 990 Wheel Loader |
 995 Wheel Loader |
|
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396:2002 | 752 hp | - | - |
| Engine Model | Cat® C27 | Cat® 3516E | - |
| Emissions | Option 2 - Emits equivalent to U.S. EPA Tier 2 | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent | - |
| Rated Speed | 1800 r/min | - | - |
| Gross Power - SAE J1995:2014 | 766 hp | 1870 hp | - |
| Net Power - SAE J1349:2011 - Standard Ambient | 699 hp | - | - |
| Net Power - SAE J1349:2011 - High Ambient | 648 hp | - | - |
| Bore | 5.4 in | 6.7 in | - |
| Stroke | 6 in | 8.5 in | - |
| Displacement | 1649.5 in³ | 4766 in³ | - |
| Peak Torque - 1,200 rpm | 2624 lb/ft | - | - |
| Torque Rise | 18 % | 39% | - |
| Note | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator. | - | - |
| Engine Power - ISO 14396 | - | 1847 hp | - |
| Net Power - SAE J1349 - Standard Ambient | - | 1739 hp | - |
| Net Power - SAE J1349 - High Ambient | - | 1696 hp | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 8549 lb/ft | - |
| Note (1) | - | The power ratings apply when tested under the reference conditions for the specified standard. | - |
| Note (2) | - | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. | - |
| Note (3) | - | The gross power advertised is with the fan at maximum speed. | - |
Operating Specifications |
|||
| Operating Weight - Standard | 178517 lb | 543772 lb | - |
| Bucket Capacity Range | 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) | 17.2-43.6 m3 (22.3-57 yd3) | - |
| Rated Payload - Standard | 17.5 ton (US) | - | - |
| Rated Payload - High Lift | 17.5 ton (US) | - | - |
| Cat Truck Match - Standard | 773-775 | 785/789 | - |
| Cat Truck Match - High Lift | 775-777 | 789/793/794 | - |
| Operating Weight - High Lift | - | 547675 lb | - |
| Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | - | 60 ton (US) | - |
| Rated Payload - Standard Lift (Moderate to High Digging Resistance) | - | 50 ton (US) | - |
| Rated Payload - High Lift (Low to Moderate Digging Resistance) | - | 55 ton (US) | - |
| Rated Payload - High Lift (Moderate to High Digging Resistance) | - | 50 ton (US) | - |
| Note | - | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. | - |
Transmission |
|||
| Transmission Type | Cat planetary power shift | Cat Planetary Power Shift | - |
| Forward - 1 | 4.6 mile/h | 4.6 mile/h | - |
| Forward - 2 | 8.2 mile/h | 8 mile/h | - |
| Forward - 3 | 14.5 mile/h | 13.6 mile/h | - |
| Reverse - 1 | 5.1 mile/h | 5 mile/h | - |
| Reverse - 2 | 9.1 mile/h | 8.8 mile/h | - |
| Reverse - 3 | 16 mile/h | 14.9 mile/h | - |
| Direct Drive - Forward 1 | Lock-up disabled | Lock-up disables | - |
| Direct Drive - Forward 2 | 8.2 mile/h | 8.7 mile/h | - |
| Direct Drive - Forward 3 | 14.5 mile/h | 15.2 mile/h | - |
| Direct Drive - Reverse 1 | 5.1 mile/h | Lock-up disables | - |
| Direct Drive - Reverse 2 | 9.1 mile/h | 9.6 mile/h | - |
| Direct Drive - Reverse 3 | 16 mile/h | 16.8 mile/h | - |
| Note | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. | Travel speeds based on 58/85-57 tires. | - |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | Positive flow control | Positive Flow Control | - |
| Lift/Tilt System | Variable displacement piston | - | - |
| Maximum Flow at 1,800 rpm | 240 gal/min | - | - |
| Relief Valve Setting - Lift/Tilt | 4786 psi | 5004 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | 235 mm × 1287 mm (9.3 in × 50.7 in) | 370 × 1713 mm (14.6 × 67.4 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 292.1 mm × 820 mm (11.5 in × 32.3 in) | 310 × 1086 mm (12.2 × 42.8 in) | - |
| Pilot System | Open loop and pressure reducing | Open Loop and Pressure Reducing | - |
| Pilot Relief Setting | 507 psi | - | - |
| Lift/Tilt System - Pump | - | Variable Displacement Piston | - |
| Maximum Flow at 1,700 rpm Engine Speed | - | 541 gal/min | - |
Hydraulic Cycle Times |
|||
| Rack Back | 4.3 s | 4.9 s | - |
| Raise | 8.6 s | 12.6 s | - |
| Dump | 2.9 s | 3.1 s | - |
| Lower | 3.7 s | - | - |
| Lower Float Down | 3.7 s | 4.2 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | 13.8 s | - | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | Pilot, load sensing | Pilot, Load Sensing | - |
| Steering System - Pump | Piston, variable displacement | Piston, Variable Displacement | - |
| Maximum Flow at 1,400 rpm | 96.2 gal/min | - | - |
| Relief Valve Setting - Steering | 5004 psi | - | - |
| Total Steering Angle | 70° | 80 degrees | - |
| Steering Cycle Times - Low Idle | - | 7.6 s | - |
| Steering Cycle Times - High Idle | - | 4.3 s | - |
Air Conditioning System |
|||
| Air Conditioning | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c | - | - |
Axles |
|||
| Front | Fixed | Fixed | - |
| Rear | Trunnion | Trunnion | - |
| Oscillation Angle | 8.5° | 9° | - |
Brakes |
|||
| Brakes | ISO 3450: 2011 | ISO 3450:2011 | - |
Service Refill Capacities |
|||
| Fuel Tank | 281 gal (US) | - | - |
| Cooling System | 54.9 gal (US) | - | - |
| Engine Crankcase | 20 gal (US) | - | - |
| Transmission | 29.1 gal (US) | - | - |
| Differential - Final Drives - Front | 71.6 gal (US) | - | - |
| Differential - Final Drives - Rear | 68.9 gal (US) | - | - |
| Hydraulic System Factory Fill | 210 gal (US) | - | - |
| Hydraulic Tank - Implement and Hydraulic Fan | 68.9 gal (US) | - | - |
| Hydraulic Tank - Steering and Braking | 34.9 gal (US) | - | - |
| Note | Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este | - | - |
Sound Performance - Tier 4 Final / Stage V |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 116 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | 114 dB(A) | - | - |
| Note (1) | *Sound suppression equipped | - | - |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Sound Performance - Tier 2 |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 116 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | 114 dB(A) | - | - |
| Note (1) | *Sound suppression equipped | - | - |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Dimensions (Approximate) - Standard Lift Linkage |
|||
| Ground to Top of ROPS | 17.2 ft | - | - |
| Ground to Top of Exhaust Stacks | 16.6 ft | - | - |
| Ground to Top of Hood | 12.7 ft | - | - |
| Ground to Bumper Clearance | 3.5 ft | - | - |
| Rear Axle - Centerline to Bumper | 12.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 15.4 ft | - | - |
| Wheel Base | 15.1 ft | - | - |
| Maximum Overall Length | 42.9 ft | - | - |
| Ground to Lower Hitch Clearance | 2 ft | - | - |
| Ground to Center of Front Axle | 4.2 ft | - | - |
| Clearance at Maximum Lift | 7.2 ft | - | - |
| Rack Back Angle at Ground Level | 40.4° | - | - |
| Rack Back Angle at Carry | 48.8° | - | - |
| B-Pin Height - Maximum Lift | 19.7 ft | - | - |
| Maximum Overall Height - Bucket Raised | 27.2 ft | - | - |
| Rack Angle at Maximum Lift | 63.7° | - | - |
| Dump Angle at Maximum Lift | 45° | - | - |
| Reach - Maximum Lift | 7.2 ft | - | - |
| Note | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - |
Dimensions (Approximate) - High Lift Linkage |
|||
| Ground to Top of ROPS | 17.2 ft | - | - |
| Ground to Top of Exhaust Stacks | 16.6 ft | - | - |
| Ground to Top of Hood | 12.7 ft | - | - |
| Ground to Bumper Clearance | 3.5 ft | - | - |
| Rear Axle - Centerline to Bumper | 12.5 ft | - | - |
| Front Axle Centerline to Bucket Tip | 17.8 ft | - | - |
| Wheel Base | 15.1 ft | - | - |
| Maximum Overall Length | 45.3 ft | - | - |
| Ground to Lower Hitch Clearance | 2 ft | - | - |
| Ground to Center of Front Axle | 4.2 ft | - | - |
| Clearance at Maximum Lift | 14.8 ft | - | - |
| Rack Back Angle at Ground Level | 39.9° | - | - |
| Rack Back Angle at Carry | 49.3° | - | - |
| B-Pin Height - Maximum Lift | 21.2 ft | - | - |
| Maximum Overall Height - Bucket Raised | 28.7 ft | - | - |
| Rack Angle at Maximum Lift | 60.6° | - | - |
| Dump Angle at Maximum Lift | 51° | - | - |
| Reach - Maximum Lift | 8.5 ft | - | - |
| Note | Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. | - | - |
Complete System Fill |
|||
| Fuel Tank - Standard | - | 856 gal (US) | - |
| Fuel Tank - With 24 hr Attachment | - | 1414 gal (US) | - |
| Cooling System | - | 138 gal (US) | - |
| Engine Crankcase | - | 76 gal (US) | - |
| Transmission | - | 110 gal (US) | - |
| Differential - Final Drives - Front | - | 220 gal (US) | - |
| Differential - Final Drives - Rear | - | 200 gal (US) | - |
| Hydraulic Tank - Implement and Hydraulic Fan | - | 270 gal (US) | - |
| Hydraulic Tank - Steering and Braking | - | 100 gal (US) | - |
| Oil Renewal System (ORS)* | - | 20 gal (US) | - |
| Note | - | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. | - |
Cooling System |
|||
| Ambient Capability Hydraulically Driven Demand Fan - Standard | - | 109.4 °F | - |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | - | 131 °F | - |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | - | 127.4 °F | - |
Sound Performance - Standard |
|||
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | - | 74 dB(A) | - |
| Machine Sound Level (ISO 6395:2008) | - | 119 dB(A) | - |
| Note | - | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c | - |
Sound Performance - Suppression |
|||
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | - | 73 dB(A) | - |
| Machine Sound Level (ISO 6395:2008) | - | 117 dB(A) | - |
| Note | - | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c | - |
Dimensions - Standard Lift - Approximate |
|||
| B-Pin Height - Maximum Lift | - | 28.8 ft | - |
| Clearance at Maximum Lift | - | 19.8 ft | - |
| Dump Angle at Maximum Lift | - | –50.0 degrees | - |
| Front Axle Centerline to Bucket Tip | - | 21.9 ft | - |
| Ground to Bumper Clearance | - | 4.4 ft | - |
| Ground to Center of Axles | - | 6 ft | - |
| Ground to Lower Hitch Clearance | - | 2.9 ft | - |
| Ground to Top of Exhaust Stacks | - | 23.2 ft | - |
| Ground to Top of Hood | - | 18.6 ft | - |
| Ground to Top of ROPS | - | 23.4 ft | - |
| Maximum Overall Height - Bucket Raised | - | 39.3 ft | - |
| Maximum Overall Length | - | 64.6 ft | - |
| Note | - | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. | - |
| Rack Angle at Maximum Lift | - | 59.5 degrees | - |
| Rack Back Angle - Carry | - | 47.7 degrees | - |
| Rack Back Angle - Ground Level | - | 39.7 degrees | - |
| Reach - Maximum Lift | - | 9.6 ft | - |
| Rear Axle - Centerline to Bumper | - | 20.4 ft | - |
| Tread Width | - | 14.1 ft | - |
| Wheel Base | - | 22.3 ft | - |
| Width - Over Tires - With Bulge | - | 18.8 ft | - |
Dimensions - High Lift - Approximate |
|||
| B-Pin Height - Maximum Lift | - | 31.6 ft | - |
| Clearance at Maximum Lift | - | 22.6 ft | - |
| Dump Angle at Maximum Lift | - | –50.0 degrees | - |
| Front Axle Centerline to Bucket Tip | - | 24.2 ft | - |
| Ground to Bumper Clearance | - | 4.4 ft | - |
| Ground to Center of Axles | - | 6 ft | - |
| Ground to Lower Hitch Clearance | - | 2.9 ft | - |
| Ground to Top of Exhaust Stacks | - | 23.2 ft | - |
| Ground to Top of Hood | - | 18.6 ft | - |
| Ground to Top of ROPS | - | 23.4 ft | - |
| Maximum Overall Height - Bucket Raised | - | 42.1 ft | - |
| Maximum Overall Length | - | 66.9 ft | - |
| Note | - | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. | - |
| Rack Angle at Maximum Lift | - | 59.4 degrees | - |
| Rack Back Angle - Carry | - | 53.5 degrees | - |
| Rack Back Angle - Ground Level | - | 45 degrees | - |
| Reach - Maximum Lift | - | 9.4 ft | - |
| Rear Axle - Centerline to Bumper | - | 20.4 ft | - |
| Tread Width | - | 14.1 ft | - |
| Wheel Base | - | 22.3 ft | - |
| Width - Over Tires - With Bulge | - | 18.8 ft | - |
Add a Similar Product:
-
992 Wheel Loader Add
-
988 GC Wheel Loader Add
-
988 XE Wheel Loader Add
-
988 Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
986 Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
930M Waste Handler Small Wheel Loader Add
-
938M Small Wheel Loader Add