CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    14 Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 hp - - 200 hp
    Engine Model Cat® C9.3 Cat C13 Cat C9.3 Cat® C9.3
    Bore 4.5 in 5.1 in 4.5 in 4.5 in
    Stroke 5.9 in 6.2 in 5.9 in 5.9 in
    Speed at Rated Power 2,000 rpm 1,850 rpm - 2,000 rpm
    VHP Plus - Gear - Net Power - Forward 4th 210 hp - - 231 hp
    VHP Plus - Gear - Net Power - Forward 8th 231 hp - - 252 hp
    Base Power (1st Gear) - Net - Metric 181 hp - - 202 hp
    Maximum Torque - VHP Plus 840 lb/ft 1137 lb/ft - 920 lb/ft
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - - 149-188 kW (202-255 hp)
    Standard Capability 109 °F 122 °F 109 °F 109 °F
    VHP Plus - Gear - Net Power - Forward 2nd 189 hp - - 210 hp
    VHP Plus - Gear - Net Power - Forward 3rd 200 hp - - 220 hp
    VHP Plus - Gear - Net Power - Forward 1st 179 hp - - 200 hp
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Reverse 2nd 189 hp - - 210 hp
    VHP Plus - Gear - Net Power - Forward 5th 215 hp - - 236 hp
    VHP Plus - Gear - Net Power - Reverse 1st 179 hp - - 200 hp
    VHP Plus - Gear - Net Power - Forward 7th 225 hp - - 247 hp
    VHP Plus - Gear - Net Power - Forward 6th 220 hp - - 241 hp
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 hp - - 220 hp
    High Ambient - Fan Speed - Standard 1,400 rpm - - 1,400 rpm
    VHP Plus Range - Net 133-172 kW (179-231 hp) - - 149-188 kW (200-252 hp)
    Torque Rise 38% 41% - 39%
    Displacement 567.5 in³ 763 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 6 6 6 6
    Derating Altitude 10000 ft - - 10000 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - - 1,550 rpm
    High Ambient - Fan Speed - Minimum 500 rpm - - 500 rpm
    High - Ambient Capability 122 °F - - 122 °F
    Base Power (1st Gear) - Net - 238 hp - -
    Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Note (2) - Optimized VHP Plus is standard for the 14M3. - -
    Maximum Altitude - Full Power - 13900 ft - -
    Maximum Altitude - Full Power (Tier 3) - 14349 ft - -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft - -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - -
    Standard - Fan Speed - Minimum - 550 rpm - -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) - -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - -
    Standard - Fan Speed - Maximum - 1,600 rpm - -
    Net Power - EEC 80/1269 - - 250 hp -
    Net Power - ISO 9249/SAE J1349 - - 250 hp -
    Engine RPM - - 2,000 -
    Torque Rise - ISO 9294 - - 44% -

    Weights
    Operating Weight - Typically Equipped 42647 lb 57250 lb 44613 lb 43950 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle 12055 lb - - 12549 lb
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - - 31401 lb
    Gross Vehicle Weight - Base - Front Axle 9343 lb - - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - - 28590 lb
    Gross Vehicle Weight - Maximum - Total 55144 lb - - 55144 lb
    Gross Vehicle Weight - Base - Total 37420 lb - - 38191 lb
    Operating Weight - Typically Equipped - Total 42647 lb - - 43950 lb
    Gross Vehicle Weight - Base* - Total - 50980 lb - -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb - -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb - -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb - -
    Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. - -

    Moldboard
    Blade Width 12 ft 14 ft 12 ft 12 ft
    Moldboard - Height 24 in - - 24 in
    Moldboard - Thickness 0.87 in - - 0.87 in
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.6 in 6.5 in 6.5 in
    Cutting Edge Width 6 in - - 6 in
    Cutting Edge Thickness 0.6 in - - 0.6 in
    End Bit - Width 6 in - - 6 in
    End Bit - Thickness 0.6 in - - 0.6 in
    Blade Pull - Base GVW 25269 lb - - 25732 lb
    Blade Pull - Maximum GVW 34262 lb - - 34262 lb
    Blade Down Pressure - Base GVW 16038 lb - - 16480 lb
    Blade Down Pressure - Maximum GVW 29309 lb - - 29308 lb
    Moldboard - Blade Width 12 ft - - 12 ft
    Blade Width - With End Bits - 169 in - -
    Blade Height - With Cutting Edge - 24.9 in - -
    Blade Width - Without End Bits - 164 in - -
    Blade Height - Without Cutting Edge - 23 in - -
    Cutting Edge - - 6 in -
    End Bit - - 6 in -

    Operating Specifications
    Top Speed - Forward 29 mile/h - - 29 mile/h
    Top Speed - Reverse 23 mile/h - - 23 mile/h
    Turning Radius - Outside Front Tires 25.59 ft - - 25.59 ft
    Steering Range - Left/Right 50° - - 50°
    Articulation Angle - Left/Right 20° - - 20°
    Forward - 1st 2.5 mile/h - - 2.5 mile/h
    Forward - 2nd 3.4 mile/h - - 3.4 mile/h
    Forward - 3rd 5 mile/h - - 5 mile/h
    Forward - 4th 6.9 mile/h - - 6.9 mile/h
    Forward - 5th 10.6 mile/h - - 10.6 mile/h
    Forward - 6th 14.5 mile/h - - 14.5 mile/h
    Forward - 7th 19.9 mile/h - - 19.9 mile/h
    Forward - 8th 29 mile/h - - 29 mile/h
    Reverse - 1st 2 mile/h - - 2 mile/h
    Reverse - 2nd 3.7 mile/h - - 3.7 mile/h
    Reverse - 3rd 5.4 mile/h - - 5.4 mile/h
    Reverse - 4th 8.4 mile/h - - 8.4 mile/h
    Reverse - 5th 15.7 mile/h - - 15.7 mile/h
    Reverse - 6th 23 mile/h - - 23 mile/h

    Service Refill
    Fuel Capacity 104 gal (US) - - 104 gal (US)
    Cooling System 15 gal (US) - - 15 gal (US)
    Hydraulic System - Total 26.4 gal (US) - - 26.4 gal (US)
    Hydraulic System - Tank 16.9 gal (US) - - 16.9 gal (US)
    Diesel Exhaust Fluid 5.8 gal (US) - - 5.8 gal (US)
    Transmission - Differential - Final Drives 18.5 gal (US) - - 18.5 gal (US)
    Engine Oil 7.9 gal (US) - - 7.9 gal (US)
    Tandem Housing - Each 20 gal (US) - - 20 gal (US)
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - - 0.13 gal (US)
    Circle Drive Housing 1.8 gal (US) - - 1.8 gal (US)
    Hydraulic System - - 14.5 gal (US) -
    Engine Crankcase - - 7.9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 100 gal (US) -
    Front Wheel Spindle Bearing - Each - - 0.13 gal (US) -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - - 8 Forward/6 Reverse
    Transmission APECS, Direct Drive, Powershift - - APECS, Direct Drive, Powershift
    Brakes - Service Multiple Oil Disc - - Multiple Oil Disc
    Brakes - Service - Surface Area 3565 in² - - 3565 in²
    Brakes - Parking Multiple Oil Disc - - Multiple Oil Disc
    Brakes - Secondary Dual Circuit - - Dual Circuit

    Hydraulic System
    Circuit Type Parallel - - Parallel
    Pump Type Variable Piston - - Variable Piston
    Pump Output 55.7 gpm - - 55.7 gpm
    Maximum System Pressure 3500 psi - - 3500 psi
    Reservoir Tank Capacity 16.9 gal (US) - - 16.9 gal (US)
    Standby Pressure 885 psi - - 885 psi

    Frame
    Drawbar - Width 3 in - - 3 in
    Circle - Diameter 60.2 in - - 60.2 in
    Circle - Blade Beam Thickness 1.6 in - - 1.6 in
    Drawbar - Height 6 in - - 6 in
    Front Frame Structure - Width 12 in - - 12 in
    Circle - Height 5.4 in - - 5.4 in
    Front Frame Structure - Height 12.6 in - - 12.6 in
    Drawbar - Thickness 0.5 in - - 0.5 in
    Front-Top/Bottom Plate - Width 12 in - - 12 in
    Front-Top/Bottom Plate - Thickness 0.87 in - - 0.87 in
    Front Axle - Height to Center 23.5 in - - 23.5 in
    Front Axle - Wheel Lean - Left/Right 18° 17.1° - 18°
    Front Axle - Total Oscillation per Side 32° 32° - 32°
    Circle - Outer Diameter - 71.7 in - -

    Blade Range
    Circle Centershift - Right 28.7 in 20.5 in - 28.7 in
    Circle Centershift - Left 27.4 in 25.6 in - 27.4 in
    Moldboard Sideshift - Right 26 in 31.1 in - 26 in
    Moldboard Sideshift - Left 20.1 in 29.1 in - 20.1 in
    Maximum Blade Position Angle 90° - - 90°
    Blade Tip Range - Forward 40° 40° - 40°
    Blade Tip Range - Backward 5° 5° - 5°
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in 78.9 in - 77.9 in
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in 73.6 in - 70.5 in
    Maximum Lift Above Ground 18.9 in 16.5 in 18.9 in 18.9 in
    Maximum Depth of Cut 28.1 in 23.3 in 28.9 in 28.1 in

    Ripper
    Ripping Depth - Maximum 16.8 in - - 16.8 in
    Ripper Shank Holder Spacing 21 in - - 21 in
    Ripper Shank Holders 5 - - 5
    Penetration Force 20812 lb - - 20812 lb
    Pry-Out Force 27794 lb - - 27794 lb
    Machine Length Increase, Beam Raised 40.6 in - - 40.6 in

    Scarifier
    Mid, V-Type - Working Width 46.6 in - - 46.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - - 18.4 in
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - - 11.5 in
    Rear - Scarifying Depth, Maximum 16.8 in - - 16.8 in
    Front, V-Type - Working Width 47.4 in - - 47.4 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - - 40.6 in
    Mid, V-Type - Scarifier Shank Holders 11 - - 11
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - - 5 or 11
    Rear - Working Width 84 in - - 84 in
    Rear - Scarifier Shank Holders 9 - - 9
    Rear - Scarifier Shank Holder Spacing 10.5 in - - 10.5 in

    Standards
    Brakes ISO 3450 - - ISO 3450
    Steering ISO 5010 - - ISO 5010
    Sound ISO 6394; ISO 6395 - - ISO 6394; ISO 6395
    ROPS/FOPS ISO 3471/ISO 3449 - - ISO 3471/ISO 3449

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con

    Tandems
    Height 19.9 in - - 19.9 in
    Width 7.9 in - - 7.9 in
    Sidewall Thickness - Inner 0.63 in - - 0.63 in
    Sidewall Thickness - Outer 0.71 in - - 0.71 in
    Drive Chain Pitch 2 in - - 2 in
    Wheel Axle Spacing 60 in - - 60 in
    Tandem Oscillation - Front Up 15° - - 15°
    Tandem Oscillation - Front Down 25° - - 25°

    Dimensions
    Height - Top of Cab 130 in - - 130 in
    Length - Counterweight to Ripper 399 in - - 399 in
    Width - Outside Front Tires 98.9 in - - 98.9 in
    Length - Front Axle to Mid Tandem 241 in - - 241 in
    Length - Front Tire to Rear of Machine 351 in - - 351 in
    Length - Front Axle to Moldboard 100 in - - 100 in
    Length - Between Tandem Axles 60 in - - 60 in
    Width - Outside Rear Tires 98.9 in - - 98.9 in
    Width - Tire Center Lines 84.3 in - - 84.3 in
    Height - Front Axle Center 23.5 in - - 23.5 in
    Height - Exhaust Stack 128 in - - 128 in
    Height - Top of Cylinders 120 in - - 120 in
    Ground Clearance - Rear Axle 13.3 in - - 13.3 in
    Basic Blade Width - - 140 in -
    Length of Machine* - - 397.6 in -
    Width - - 97.6 in -
    Note - - *Typically equipped with push block and ripper. -
    Maximum Height - - 132 in -

    Service Refill Capacities
    Transmission and Differential - 23.5 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8 gal (US) - -
    Hydraulic System - 33 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Cooling System - 15.9 gal (US) - -
    Fuel Tank - 109.9 gal (US) - -

    Machine Weight
    Note - - *Typically equipped with push block and ripper. -
    All-Wheel Drive (AWD) Weight - - 44613 lb -
    Add a Similar Product: