CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    120
    View Product Remove
    18 Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 hp - - -
    Engine Model Cat® C9.3 Cat 7.1 Cat® C13 Cat C9.3
    Bore 4.5 in 4.1 in 5.1 in 4.5 in
    Stroke 5.9 in 5.3 in 6.2 in 5.9 in
    Speed at Rated Power 2,000 rpm - 2,000 rpm -
    VHP Plus - Gear - Net Power - Forward 4th 210 hp - - -
    VHP Plus - Gear - Net Power - Forward 8th 231 hp - - -
    Base Power (1st Gear) - Net - Metric 181 hp - - -
    Maximum Torque - VHP Plus 840 lb/ft - - -
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - - -
    Standard Capability 109 °F 122 °F - 109 °F
    VHP Plus - Gear - Net Power - Forward 2nd 189 hp - - -
    VHP Plus - Gear - Net Power - Forward 3rd 200 hp - - -
    VHP Plus - Gear - Net Power - Forward 1st 179 hp - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA - U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Reverse 2nd 189 hp - - -
    VHP Plus - Gear - Net Power - Forward 5th 215 hp - - -
    VHP Plus - Gear - Net Power - Reverse 1st 179 hp - - -
    VHP Plus - Gear - Net Power - Forward 7th 225 hp - - -
    VHP Plus - Gear - Net Power - Forward 6th 220 hp - - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 hp - - -
    High Ambient - Fan Speed - Standard 1,400 rpm - - -
    VHP Plus Range - Net 133-172 kW (179-231 hp) - - -
    Torque Rise 38% - - -
    Displacement 567.5 in³ 427.8 in³ 763 in³ 567.5 in³
    Number of Cylinders 6 6 6 6
    Derating Altitude 10000 ft 9842.5 ft - -
    High Ambient - Fan Speed - Maximum 1,550 rpm - - -
    High Ambient - Fan Speed - Minimum 500 rpm - - -
    High - Ambient Capability 122 °F - - -
    Net Power - ISO 9249/SAE J1349 - 130 hp - 250 hp
    Note (2) - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Torque - ISO 9249 - 606 lb/ft - -
    Net Power Range (Tier 3) - 130 hp - -
    Note (3) - Power as declared per ISO 14396 - -
    Engine RPM - 2,000 - 2,000
    Maximum Torque - AWD On - 611 lb/ft - -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." - -
    Derating Altitude (AWD) - 5499 ft - -
    Torque Rise - ISO 9294 - 42% - 44%
    All-Wheel Drive Net Power Range (Tier 4) - 174 kW - -
    Base Power (1st Gear) - Net - - 304 hp -
    Standard - Ambient Capability - - 122 °F -
    VHP Range - Net - - 227-266 kW (304-357 hp) -
    Standard - Fan Speed - Minimum - - 550 rpm -
    Emissions (1) - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 40% -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 38% -
    Standard - Fan Speed - Maximum - - 1,450 rpm -
    Emissions (2) - - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 38% -
    VHP Range - Net - Metric - - 227-266 kW (309-362 hp) -
    Emissions (3) - - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards -
    Optimized VHP Range - Net - - 227-266 kW (304-357 hp) -
    Net Power - EEC 80/1269 - - - 250 hp

    Weights
    Operating Weight - Typically Equipped 42647 lb 35067 lb 74324 lb 44613 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - - -
    Operating Weight - Typically Equipped - Front Axle 12055 lb - - -
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - - -
    Gross Vehicle Weight - Base - Front Axle 9343 lb - - -
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - - -
    Gross Vehicle Weight - Base - Total 37420 lb - - -
    Operating Weight - Typically Equipped - Total 42647 lb - - -

    Moldboard
    Blade Width 12 ft 12 ft 18 ft 12 ft
    Moldboard - Height 24 in - - -
    Moldboard - Thickness 0.87 in - - -
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.1 in 5 in 6.5 in
    Cutting Edge Width 6 in - 10 in -
    Cutting Edge Thickness 0.6 in - 1.4 in -
    End Bit - Width 6 in - 6 in -
    End Bit - Thickness 0.6 in - 0.75 in -
    Blade Pull - Base GVW 25269 lb - - -
    Blade Pull - Maximum GVW 34262 lb - - -
    Blade Down Pressure - Base GVW 16038 lb - - -
    Blade Down Pressure - Maximum GVW 29309 lb - - -
    Moldboard - Blade Width 12 ft - - -
    Blade Height - 24 in - -
    End Bit - 6 in - 6 in
    Cutting Edge - 6 in - 6 in
    Down Force - Maximum GVW - - 43861 lb -
    Blade Pull* - Base GVW - - 47216 lb -
    Blade Pull* - Maximum GVW - - 52878 lb -
    Down Force - Base GVW - - 34008 lb -
    Thickness - - 1 in -
    Width - - 18 ft -
    Height - - 31 in -
    Note - - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. -

    Operating Specifications
    Top Speed - Forward 29 mile/h - 32.1 mile/h -
    Top Speed - Reverse 23 mile/h - 25.3 mile/h -
    Turning Radius - Outside Front Tires 25.59 ft - 30.5 ft -
    Steering Range - Left/Right 50° - 47.5° -
    Articulation Angle - Left/Right 20° - 20° -
    Forward - 1st 2.5 mile/h - 2.8 mile/h -
    Forward - 2nd 3.4 mile/h - 3.8 mile/h -
    Forward - 3rd 5 mile/h - 5.5 mile/h -
    Forward - 4th 6.9 mile/h - 7.6 mile/h -
    Forward - 5th 10.6 mile/h - 11.8 mile/h -
    Forward - 6th 14.5 mile/h - 16 mile/h -
    Forward - 7th 19.9 mile/h - 22 mile/h -
    Forward - 8th 29 mile/h - 32.1 mile/h -
    Reverse - 1st 2 mile/h - 2.2 mile/h -
    Reverse - 2nd 3.7 mile/h - 4.1 mile/h -
    Reverse - 3rd 5.4 mile/h - 6 mile/h -
    Reverse - 4th 8.4 mile/h - 9.3 mile/h -
    Reverse - 5th 15.7 mile/h - 17.4 mile/h -
    Reverse - 6th 23 mile/h - 25.3 mile/h -
    Note - - Calculated with no slip and 23.5R25 L-3 tires. -

    Service Refill
    Fuel Capacity 104 gal (US) - 131 gal (US) -
    Cooling System 15 gal (US) - 18.5 gal (US) -
    Hydraulic System - Total 26.4 gal (US) - 38.6 gal (US) -
    Hydraulic System - Tank 16.9 gal (US) - 18.5 gal (US) -
    Diesel Exhaust Fluid 5.8 gal (US) - - -
    Transmission - Differential - Final Drives 18.5 gal (US) - 26 gal (US) -
    Engine Oil 7.9 gal (US) - 9.5 gal (US) -
    Tandem Housing - Each 20 gal (US) - 34 gal (US) -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - 0.24 gal (US) -
    Circle Drive Housing 1.8 gal (US) - 2.6 gal (US) -
    DEF Tank - - 4.2 gal (US) -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - 8 Forward/6 Reverse -
    Transmission APECS, Direct Drive, Powershift - Direct drive, power shift, countershaft -
    Brakes - Service Multiple Oil Disc - Oil-actuated, oil disc -
    Brakes - Service - Surface Area 3565 in² - - -
    Brakes - Parking Multiple Oil Disc - Spring applied, hydraulically released -
    Brakes - Secondary Dual Circuit - Oil-actuated, oil-disc -
    Brakes - Dynamic Brake Torque per Wheel - - 27069.27 ft·lbf -

    Hydraulic System
    Circuit Type Parallel - Electro-hydraulic load sensing, closed center -
    Pump Type Variable Piston - Variable piston -
    Pump Output 55.7 gpm - - -
    Maximum System Pressure 3500 psi - 3590 psi -
    Reservoir Tank Capacity 16.9 gal (US) - - -
    Standby Pressure 885 psi - 856 psi -
    Pump Output* - - 74 gpm -
    Note - - *Pump output measured at 2,150 rpm. -

    Frame
    Drawbar - Width 3 in - 3 in -
    Circle - Diameter 60.2 in - 71.7 in -
    Circle - Blade Beam Thickness 1.6 in - 2 in -
    Drawbar - Height 6 in - 8 in -
    Front Frame Structure - Width 12 in - 14 in -
    Circle - Height 5.4 in - - -
    Front Frame Structure - Height 12.6 in - 18.1 in -
    Drawbar - Thickness 0.5 in - - -
    Front-Top/Bottom Plate - Width 12 in - - -
    Front-Top/Bottom Plate - Thickness 0.87 in - - -
    Front Axle - Height to Center 23.5 in - 26.4 in -
    Front Axle - Wheel Lean - Left/Right 18° - - -
    Front Axle - Total Oscillation per Side 32° - 35° -
    Front Frame Structure - Thickness - - 0.6 in -
    Front Axle - Wheel Lean - - 18° Left/17° Right -

    Blade Range
    Circle Centershift - Right 28.7 in - 22 in -
    Circle Centershift - Left 27.4 in - 27.2 in -
    Moldboard Sideshift - Right 26 in - 31.1 in -
    Moldboard Sideshift - Left 20.1 in - 29.1 in -
    Maximum Blade Position Angle 90° - 65° -
    Blade Tip Range - Forward 40° - 40° -
    Blade Tip Range - Backward 5° - 5° -
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in - 103 in -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in - 103 in -
    Maximum Lift Above Ground 18.9 in 16.1 in 15.7 in 18.9 in
    Maximum Depth of Cut 28.1 in 30.5 in 18.5 in 28.9 in
    Blade Tip Range Forward - 40 - -
    Maximum Shoulder Reach Right - 76 in - -
    Moldboard Side Shift Right - 26.1 in - -
    Maximum Shoulder Reach Left - 69.4 in - -
    Moldboard Side Shift Left - 20.1 in - -
    Circle Center Shift Left - 26 in - -
    Blade Tip Range Backward - 5 - -
    Circle Center Shift Right - 26 in - -

    Ripper
    Ripping Depth - Maximum 16.8 in - 17.8 in -
    Ripper Shank Holder Spacing 21 in - - -
    Ripper Shank Holders 5 - 7 -
    Penetration Force 20812 lb - 30311 lb -
    Pry-Out Force 27794 lb - 43700 lb -
    Machine Length Increase, Beam Raised 40.6 in - 63.4 in -
    Shank Holder Spacing - Minimum - - 17.5 in -
    Shank Holder Spacing - Maximum - - 20 in -

    Scarifier
    Mid, V-Type - Working Width 46.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - - -
    Rear - Scarifying Depth, Maximum 16.8 in - - -
    Front, V-Type - Working Width 47.4 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - - -
    Mid, V-Type - Scarifier Shank Holders 11 - - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - - -
    Rear - Working Width 84 in - - -
    Rear - Scarifier Shank Holders 9 - - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - - -

    Standards
    Brakes ISO 3450 - ISO 3450: 2011 -
    Steering ISO 5010 - ISO 5010: 2007 -
    Sound ISO 6394; ISO 6395 - ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008 -
    ROPS/FOPS ISO 3471/ISO 3449 - ISO 3471: 2008/ISO 3449: 2005 -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

    Tandems
    Height 19.9 in - 25.5 in -
    Width 7.9 in - 9.3 in -
    Sidewall Thickness - Inner 0.63 in - 0.9 in -
    Sidewall Thickness - Outer 0.71 in - 0.9 in -
    Drive Chain Pitch 2 in - 2.5 in -
    Wheel Axle Spacing 60 in - 72.5 in -
    Tandem Oscillation - Front Up 15° - 15° -
    Tandem Oscillation - Front Down 25° - 25° -

    Dimensions
    Height - Top of Cab 130 in - - -
    Length - Counterweight to Ripper 399 in - - -
    Width - Outside Front Tires 98.9 in - - -
    Length - Front Axle to Mid Tandem 241 in - - -
    Length - Front Tire to Rear of Machine 351 in - - -
    Length - Front Axle to Moldboard 100 in - - -
    Length - Between Tandem Axles 60 in - - -
    Width - Outside Rear Tires 98.9 in - - -
    Width - Tire Center Lines 84.3 in - - -
    Height - Front Axle Center 23.5 in - - -
    Height - Exhaust Stack 128 in - - -
    Height - Top of Cylinders 120 in - - -
    Ground Clearance - Rear Axle 13.3 in - - -
    Maximum Height - 136.4 in - 132 in
    Length of Machine* - 387 in - 397.6 in
    Width All Wheel Drive (AWD) - 2551 mm - -
    Width - 102 in - 97.6 in
    Note - *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Basic Blade Width - 12 ft - 140 in

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 65 gal (US) - -
    Cooling System - 14 gal (US) - -
    Engine Crankcase - 4.8 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) - -
    Hydraulic System - 25.6 gal (US) - -

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb - -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. - -
    Joystick Weight* Tier 4 - 35358 lb - -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb - -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb - -
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Front Axle - - 26125 lb -
    Note (2) - - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab. -
    Note (1) - - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt. -

    Dimensions (Approximate)
    Height - Top of Cylinders - - 122.6 in -
    Width - Outside Rear Tires - - 134.3 in -
    Height - Exhaust Stack - - 141.1 in -
    Length - Between Tandem Axles - - 72.5 in -
    Length - Front Axle to Mid Tandem - - 290 in -
    Width - Tire Center Lines - - 106.4 in -
    Length - Front Axle to Moldboard - - 120.7 in -
    Length - Counterweight to Ripper - - 474.4 in -
    Height - Front Axle Center - - 29.9 in -
    Width - Outside Front Tires - - 134.3 in -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - - 417 in -
    Height - Top of Cab - - 147.5 in -
    Ground Clearance - Rear Axle - - 16.7 in -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - - Tires: 23.5R25 Bridgestone VKT 1 Star -
    Wheel Group - 19.5×25 MP (1) - - Tires: 23.5R25 Bridgestone VKT 2 Star -
    Wheel Group - 19.5×25 MP (3) - - Tires: 23.5R25 Bridgestone VJT 1 Star -
    Wheel Group - 19.5×25 MP (4) - - Tires: 23.5R25 Michelin XHA 2 Star -
    Wheel Group - 19.5×25 MP (5) - - Tires: 23.5R25 Michelin XLDD 2 Star L5 -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 2nd - - 309 hp -
    Gear - Forward 4th - - 325 hp -
    Add a Similar Product: