Compare Equipment Go Back
 826 Landfill Compactor |
 CS11 GC Vibratory Soil Compactor |
|
|
Engine |
|||
|---|---|---|---|
| Gross Power - SAE J1995:2014 | 435 hp | - | - |
| Net Power - SAE J1349:2011 | 405 hp | 111.2 hp | - |
| Net Power - ISO 9249:2007 | 405 hp | - | - |
| Engine Power - ISO 14396:2002 | 426 hp | - | - |
| Engine Model | C15 Cat® | Cat® C3.6 | - |
| Emissions | U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA | U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, Japan 2014 | - |
| Rated Speed | 1800 | - | - |
| Torque Rise | 33% | - | - |
| Bore | 5.4 in | 3.9 in | - |
| Stroke | 6.7 in | 4.7 in | - |
| Displacement | 927.6 in³ | - | - |
| High Idle Speed | 2300 r/min | - | - |
| Low Idle Speed | 800 r/min | - | - |
| Maximum Altitude – Without Derating (Tier 4 Final/Stage V) | 9298 ft | - | - |
| Maximum Altitude - Without Derating (Tier 3/Stage IIIA) | 9098 ft | - | - |
| Note | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. | - | - |
| Gross Power | - | 122.9 hp | - |
| Engine Power - ISO 14396 | - | 120.7 hp | - |
| Net Power - ISO 9249 | - | 112.2 hp | - |
| Note (1) | - | Net power advertised is the power available at the engine flywheel when equipped with a fan at maximum speed, air cleaner, clean emissions module, and alternator. | - |
Operating Specifications |
|||
| Operating Weight (Tier 4 Final/Stage V) | 90207 lb | - | - |
| Operating Weight (Tier 3/Stage IIIA equivalent) | 89186 lb | - | - |
| Maximum Operating Weight (Tier 4 Final/Stage V) | 92568 lb | - | - |
| Maximum Operating Weight (Tier 3/Stage IIIA equivalent) | 91549 lb | - | - |
| Ground Clearance | - | 20.4 in | - |
| Curb Clearance | - | 19.4 in | - |
| Turning Radius - Inside Drum Edge | - | 12.7 ft | - |
| Travel Speed - Maximum | - | 6.8 mile/h | - |
| Drum Width | - | 84 in | - |
Transmission |
|||
| Transmission Type | Planetary - Powershift - ECPC | - | - |
| Direct Drive - Forward 1 | 4.2 mile/h | - | - |
| Direct Drive - Forward 2 | 7.5 mile/h | - | - |
| Direct Drive - Reverse 1 | 4.3 mile/h | - | - |
| Direct Drive - Reverse 2 | 8.6 mile/h | - | - |
Hydraulic System |
|||
| Pump Flow at 1800 rpm | 30.9 gpm | - | - |
| Main Relief Pressure | 3771 psi | - | - |
| Maximum Supply Pressure | 3495 psi | - | - |
| Lift System | Double Acting Cylinder | - | - |
| Bore | 4.7 in | - | - |
| Stroke | 42.1 in | - | - |
Service Refill Capacities |
|||
| Cooling System | 30.6 gal (US) | 4.9 gal (US) | - |
| Engine Crankcase | 9 gal (US) | - | - |
| Transmission | 17.4 gal (US) | - | - |
| Fuel Tank | 206.6 gal (US) | - | - |
| Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) | 8.5 gal (US) | - | - |
| Differential - Final Drives - Front | 26.4 gal (US) | - | - |
| Differential - Final Drives - Rear | 29.1 gal (US) | - | - |
| Hydraulic Tank Only | 35.4 gal (US) | - | - |
| Note | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H | - | - |
| Fuel Tank Capacity | - | 56.3 gal (US) | - |
| DEF Tank | - | 5 gal (US) | - |
| Engine Oil - With Filter | - | 3.1 gal (US) | - |
| Eccentric Weight Housings (combined) | - | 6.9 gal (US) | - |
| Axle and Final Drives | - | 2.6 gal (US) | - |
| Hydraulic Tank | - | 6.1 gal (US) | - |
Axles |
|||
| Front | Planetary - Fixed | - | - |
| Rear | Planetary - Oscillating | - | - |
| Oscillation Angle | ±5° | - | - |
Braking System |
|||
| Service Brakes | Multi Disc Wet (Enclosed) 2 WHL | - | - |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released | - | - |
Sound Performance - Tier 4 Final / Stage V |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 113 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | 110 dB(A) | - | - |
| Note (1) | * Sound suppression equipped | - | - |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Sound Performance - Tier 3 / Stage IIIA |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | 73 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008) | 113 dB(A) | - | - |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - |
| Machine Sound Power Level (ISO 6395:2008)* | 110 dB(A) | - | - |
| Note (1) | * Sound suppression equipped | - | - |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - | - |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | Pilot operated, load sensing | - | - |
| Bore | 4.5 in | - | - |
| Stroke | 22.7 in | - | - |
| Steering System - Pump | Piston - Variable Displacement | - | - |
| Maximum System Flow | 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) | - | - |
| Steering Pressure Limited | 3481 psi | - | - |
| Vehicle Articulation Angle | 86 ° | - | - |
Dimensions (Approximate) |
|||
| Height to Top of Air Conditioning Condenser | 14.99 ft | - | - |
| Height - Cab Roof | 13.75 ft | - | - |
| Height - Top of Beacon | 15.63 ft | - | - |
| Height - Top of Exhaust Pipe | 14.56 ft | - | - |
| Height - Top of Hood | 10.87 ft | - | - |
| Ground Clearance - Bumper | 3.15 ft | - | - |
| Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard | 9.38 ft | - | - |
| Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard | 10.16 ft | - | - |
| Hitch to Centerline of Front Axle | 6.07 ft | - | - |
| Wheel Base | 12.14 ft | - | - |
| Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard | 28.59 ft | - | - |
| Ground Clearance | 2.11 ft | - | - |
| Width - Over Wheels | 12.47 ft | - | - |
| Turning Radius - Inside of Wheels | 9.18 ft | - | - |
Straight Blade |
|||
| Width – Moldboard Length | 14.16 ft | - | - |
| Width - Over End Bits | 14.75 ft | - | - |
| Height with Cutting Edge and Screen | 6.23 ft | - | - |
| Maximum Depth of Cut | 1.5 ft | - | - |
| Maximum Lift above Ground | 4.19 ft | - | - |
| Capacity, Rated | 16.1 yd³ | - | - |
| Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 28.59 ft | - | - |
Semi U-Blade |
|||
| Width – Moldboard Length | 14.66 ft | - | - |
| Width - Over End Bits | 14.83 ft | - | - |
| Height with Cutting Edge and Screen | 6.63 ft | - | - |
| Maximum Depth of Cut | 2.03 ft | - | - |
| Maximum Lift above Ground | 3.825 ft | - | - |
| Capacity, Rated | 20.9 yd³ | - | - |
| Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 29.54 ft | - | - |
U-Blade |
|||
| Width – Moldboard Length | 14.25 ft | - | - |
| Width - Over End Bits | 14.41 ft | - | - |
| Height with Cutting Edge and Screen | 6.62 ft | - | - |
| Maximum Depth of Cut | 2.03 mm | - | - |
| Maximum Lift above Ground | 3.79 ft | - | - |
| Capacity, Rated | 22.9 yd³ | - | - |
| Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 30.7 ft | - | - |
Wheels |
|||
| Combination Tips (Weight Group) | 21125 lb | - | - |
| Plus Tips - Weight (Group) | 22002 lb | - | - |
| Paddle Tips - Weight (Group) | 20540 lb | - | - |
| Diamond Tips Weight (Group) | 23997 lb | - | - |
| Outside Diameter | 77.6 in | - | - |
| Outside Diameter - Diamond | 78.1 in | - | - |
| Drum Diameter | 63.4 in | - | - |
| Drum Width | 47.2 in | - | - |
| Feet Per Row | 6 | - | - |
| Feet Per Wheel | 30 | - | - |
| Replaceable | Weld On | - | - |
| Width Over Drums | 3800 mm | - | - |
| Tip Height | 179 mm | - | - |
| Tip Height - Diamond | 7.25 in | - | - |
Weights |
|||
| Operating Weight - With Cab | - | 24775 lb | - |
| Operating Weight - With ROPS/FOPS Canopy | - | 24435 lb | - |
| Weight - Drum with Cab | - | 13549 lb | - |
| Weight - Drum with ROPS/FOPS Canopy | - | 13453 lb | - |
| Note (1) | - | Operating weights are approximate and consider full fluids and 75 kg (165 lb) operator. Cab weights include heat and air conditioning. | - |
Dimensions |
|||
| Compaction Width | - | 84 in | - |
| Overall Length | - | 18.7 ft | - |
| Overall Width | - | 7.5 ft | - |
| Maximum Height | - | 9.9 ft | - |
| Drum Diameter | - | 60.4 in | - |
| Wheel Base | - | 9.8 ft | - |
Sustainability |
|||
| Recyclability | - | 94% | - |
Vibratory System |
|||
| Nominal Amplitude - High | - | 0.079 in | - |
| Nominal Amplitude - Low | - | 0.039 in | - |
| Centrifugal Force - Maximum | - | 56200 lb | - |
| Centrifugal Force - Minimum | - | 33500 lb | - |
| Static Linear Load - With Cab | - | 161.3 lb/in | - |
| Static Linear Load - With ROPS/FOPS Canopy | - | 160.1 lb/in | - |
Add a Similar Product:
-
CP56B Vibratory Soil Compactor Add
-
CP11 GC Vibratory Soil Compactor Add
-
CB16 Tandem Vibratory Roller Add
-
CS10 GC Vibratory Soil Compactor Add
-
CB15 Tandem Vibratory Roller Add
-
CB4.4 Utility Compactor Add
-
CB13 Tandem Vibratory Roller Add
-
CB4.0 Utility Compactor Add
-
CB4.4 Utility Compactor Add
-
CC2.7 GC Utility Compactor Add