CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    826 Landfill Compactor
    View Product

    Engine
    Gross Power - SAE J1995:2014 435 hp - -
    Net Power - SAE J1349:2011 405 hp - -
    Net Power - ISO 9249:2007 405 hp - -
    Engine Power - ISO 14396:2002 426 hp - -
    Engine Model C15 Cat® - -
    Emissions U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA - -
    Rated Speed 1800 - -
    Torque Rise 33% - -
    Bore 5.4 in - -
    Stroke 6.7 in - -
    Displacement 927.6 in³ - -
    High Idle Speed 2300 r/min - -
    Low Idle Speed 800 r/min - -
    Maximum Altitude – Without Derating (Tier 4 Final/Stage V) 9298 ft - -
    Maximum Altitude - Without Derating (Tier 3/Stage IIIA) 9098 ft - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - -

    Operating Specifications
    Operating Weight (Tier 4 Final/Stage V) 90207 lb - -
    Operating Weight (Tier 3/Stage IIIA equivalent) 89186 lb - -
    Maximum Operating Weight (Tier 4 Final/Stage V) 92568 lb - -
    Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 91549 lb - -

    Transmission
    Transmission Type Planetary - Powershift - ECPC - -
    Direct Drive - Forward 1 4.2 mile/h - -
    Direct Drive - Forward 2 7.5 mile/h - -
    Direct Drive - Reverse 1 4.3 mile/h - -
    Direct Drive - Reverse 2 8.6 mile/h - -

    Hydraulic System
    Pump Flow at 1800 rpm 30.9 gpm - -
    Main Relief Pressure 3771 psi - -
    Maximum Supply Pressure 3495 psi - -
    Lift System Double Acting Cylinder - -
    Bore 4.7 in - -
    Stroke 42.1 in - -

    Service Refill Capacities
    Cooling System 30.6 gal (US) - -
    Engine Crankcase 9 gal (US) - -
    Transmission 17.4 gal (US) - -
    Fuel Tank 206.6 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) 8.5 gal (US) - -
    Differential - Final Drives - Front 26.4 gal (US) - -
    Differential - Final Drives - Rear 29.1 gal (US) - -
    Hydraulic Tank Only 35.4 gal (US) - -
    Note Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H - -

    Axles
    Front Planetary - Fixed - -
    Rear Planetary - Oscillating - -
    Oscillation Angle ±5° - -

    Braking System
    Service Brakes Multi Disc Wet (Enclosed) 2 WHL - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)* 110 dB(A) - -
    Note (1) * Sound suppression equipped - -
    Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)* 110 dB(A) - -
    Note (1) * Sound suppression equipped - -
    Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot operated, load sensing - -
    Bore 4.5 in - -
    Stroke 22.7 in - -
    Steering System - Pump Piston - Variable Displacement - -
    Maximum System Flow 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) - -
    Steering Pressure Limited 3481 psi - -
    Vehicle Articulation Angle 86 ° - -

    Dimensions (Approximate)
    Height to Top of Air Conditioning Condenser 14.99 ft - -
    Height - Cab Roof 13.75 ft - -
    Height - Top of Beacon 15.63 ft - -
    Height - Top of Exhaust Pipe 14.56 ft - -
    Height - Top of Hood 10.87 ft - -
    Ground Clearance - Bumper 3.15 ft - -
    Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard 9.38 ft - -
    Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard 10.16 ft - -
    Hitch to Centerline of Front Axle 6.07 ft - -
    Wheel Base 12.14 ft - -
    Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard 28.59 ft - -
    Ground Clearance 2.11 ft - -
    Width - Over Wheels 12.47 ft - -
    Turning Radius - Inside of Wheels 9.18 ft - -

    Straight Blade
    Width – Moldboard Length 14.16 ft - -
    Width - Over End Bits 14.75 ft - -
    Height with Cutting Edge and Screen 6.23 ft - -
    Maximum Depth of Cut 1.5 ft - -
    Maximum Lift above Ground 4.19 ft - -
    Capacity, Rated 16.1 yd³ - -
    Overall Machine Length (includes rear radiator guard, measured to cutting edge) 28.59 ft - -

    Semi U-Blade
    Width – Moldboard Length 14.66 ft - -
    Width - Over End Bits 14.83 ft - -
    Height with Cutting Edge and Screen 6.63 ft - -
    Maximum Depth of Cut 2.03 ft - -
    Maximum Lift above Ground 3.825 ft - -
    Capacity, Rated 20.9 yd³ - -
    Overall Machine Length (includes rear radiator guard, measured to cutting edge) 29.54 ft - -

    U-Blade
    Width – Moldboard Length 14.25 ft - -
    Width - Over End Bits 14.41 ft - -
    Height with Cutting Edge and Screen 6.62 ft - -
    Maximum Depth of Cut 2.03 mm - -
    Maximum Lift above Ground 3.79 ft - -
    Capacity, Rated 22.9 yd³ - -
    Overall Machine Length (includes rear radiator guard, measured to cutting edge) 30.7 ft - -

    Wheels
    Combination Tips (Weight Group) 21125 lb - -
    Plus Tips - Weight (Group) 22002 lb - -
    Paddle Tips - Weight (Group) 20540 lb - -
    Diamond Tips Weight (Group) 23997 lb - -
    Outside Diameter 77.6 in - -
    Outside Diameter - Diamond 78.1 in - -
    Drum Diameter 63.4 in - -
    Drum Width 47.2 in - -
    Feet Per Row 6 - -
    Feet Per Wheel 30 - -
    Replaceable Weld On - -
    Width Over Drums 3800 mm - -
    Tip Height 179 mm - -
    Tip Height - Diamond 7.25 in - -
    Add a Similar Product:
    • CS12 GC Vibratory Soil Compactor Add
    • CP56B Vibratory Soil Compactor Add
    • CP44B Vibratory Soil Compactor Add
    • CS44B Vibratory Soil Compactor Add
    • CP11 GC Vibratory Soil Compactor Add
    • CS11 GC Vibratory Soil Compactor Add
    • CS10 GC Vibratory Soil Compactor Add
    • CB15 Tandem Vibratory Roller Add
    • CB16 Tandem Vibratory Roller Add
    • CB4.4 Utility Compactor Add