Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	950 GC Wheel Loader \| Front Loader View Product Remove	920 Compact Wheel Loader View Product Remove	910 Compact Wheel Loader View Product Remove	988 GC Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove	903D Compact Wheel Loader View Product Remove	992 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	-	-	580 hp	-	-
Engine Model	Cat® C18	Cat C7.1	Cat C3.6	Cat C3.6	Cat® C15	Cat® C18	Cat C2.4*	Cat® C32B
Rated Speed	1700/rpm	-	-	-	2000 rpm	1,700 rpm	-	1750 rpm
Peak Power Speed	1500/rpm	-	-	-	1600 rpm	1,500 rpm	-	-
Gross Power - SAE J1995:2014	588 hp	-	-	-	456 hp	588 hp	-	-
Net Power - SAE J1349:2011	538 hp	-	-	-	448 hp	538 hp	-	-
Bore	5.7 in	4.13 in	3.85 in	3.85 in	5.4 in	5.7 in	3.4 in	5.7 in
Stroke	7.2 in	5.31 in	4.72 in	4.72 in	6.75 in	7.2 in	4 in	6.4 in
Displacement	1105 in³	428 in³	220 in³	220 in³	927 in³	1105 in³	147 in²	1963.5 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	-	-	-	2230 lbf·ft	-	-
Torque Rise	58 %	-	-	-	16%	58%	-	-
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	-	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-
Net Power - ISO 9249	-	225 hp	-	-	-	-	-	-
Emissions	-	Tier 4/Stage V	Engine meets Tier 4 Final/Stage V emission standards.	Engine meets Tier 4 Final/Stage V emission standards.	-	-	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Note	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	-	*Engine meets U.S. EPA Tier 4 Final emission standards.	-
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	228 hp	-	-	-	-	-	-
Maximum Power - 1,700 rpm - ISO 14396	-	240 hp	-	-	-	-	-	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	243 hp	-	-	-	-	-	-
Peak Gross Torque - 1,400 rpm - SAE J1995	-	811 ft·lbf	-	-	-	-	-	-
Peak Gross Torque - 1,400 rpm - ISO 14396	-	805 ft·lbf	-	-	-	-	-	-
Maximum Net Power - 1,700 rpm - ISO 9249	-	225 hp	-	-	-	-	-	-
Maximum Net Power - 1,700 rpm - SAE J1349	-	225 hp	-	-	-	-	-	-
Maximum Power - 1,700 rpm - SAE J1995	-	241 hp	-	-	-	-	-	-
Maximum Gross Power	-	-	121 hp	110 hp	-	-	42 hp	-
Rated Net Power - Rated Engine Speed	-	-	2200 r/min	2200 r/min	-	-	-	-
Maximum Gross Power - Rated Engine Speed	-	-	2200 r/min	1800 r/min	-	-	-	-
Rated Net Power - SAE J1349	-	-	120 hp	99 hp	-	-	-	-
Maximum Gross Power - ISO 14396 (metric)	-	-	122 hp	112 hp	-	-	-	-
Rated Net Power - ISO 9249	-	-	118 hp	98 hp	-	-	-	-
Maximum Gross Torque - SAE J1995	-	-	372 ft·lbf	335 ft·lbf	-	-	-	-
Maximum Gross Torque - ISO 14396	-	-	369 ft·lbf	332 ft·lbf	-	-	-	-
Maximum Net Torque - SAE J1349	-	-	366 ft·lbf	329 ft·lbf	-	-	-	-
Maximum Net Torque - ISO 9249	-	-	363 ft·lbf	327 ft·lbf	-	-	-	-
Maximum Gross Power - ISO 14396	-	-	121 hp	110 hp	-	-	-	-
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	-	1778 lbf·ft	-	-	-
Note (3)	-	-	-	-	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.	-	-	-
Gross Power	-	-	-	-	-	-	42 hp	-
Net Power - 2,200 rpm - SAE J1349 R-ing	-	-	-	-	-	-	40 hp	-
Net Power - 2,200 rpm - ISO 9249 R-ing	-	-	-	-	-	-	40 hp	-
Net Power	-	-	-	-	-	-	-	814 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	-	-	-	-	-	900 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	-	-	-	-	937 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	-	-	-	-	-	907 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	-	-	-	-	944 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	-	-	-	-	884 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	-	-	-	-	921 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	-	-	-	-	893 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	-	-	-	-	931 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	-	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	-	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	-	-	-	-	823 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	-	-	-	-	823 hp
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	-	-	-	-	-	3514 ft·lbf
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	-	-	-	-	-	3555 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	-	-	-	-	-	3537 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	-	-	-	-	-	3570 ft·lbf
Operating Specifications
Operating Weight	112574 lb	-	-	-	112426 lb	116362 lb	-	233430 lb
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	-	-	6.4-7.6 m3 (8.3-10 yd3)	4.7-13 m3 (6.2-17 yd3)	-	11.5-24.5 m³ (15-32 yd³)
Rated Payload - Quarry Face	12.5 t	-	-	-	12.5 ton (US)	12.5 t	-	-
Rated Payload - Loose Material	16 t	-	-	-	-	16 t	-	-
Cat Truck Match - Standard	770 - 772	-	-	-	-	-	-	775/777
Cat Truck Match - High Lift	773 - 775	-	-	-	772/773/775	-	-	785
Rated Payload - Standard	-	-	-	-	-	-	-	25.5 ton (US)
Rated Payload - Standard (Material Handler)	-	-	-	-	-	-	-	30 ton (US)
Rated Payload - High Lift	-	-	-	-	-	-	-	22.5 ton (US)
Rated Payload - High Lift (Material Handler)	-	-	-	-	-	-	-	27 ton (US)
Transmission
Transmission Type	Cat planetary powershift	-	-	-	Cat planetary power shift	Cat switched reluctance electric drive	-	Cat Planetary Powershift
Forward - 1	4 mile/h	4.5 mile/h	-	-	5 mile/h	-	-	4.3 mile/h
Forward - 2	7.2 mile/h	8 mile/h	-	-	8 mile/h	-	-	7.4 mile/h
Forward - 3	12.7 mile/h	14.2 mile/h	-	-	-	-	-	12.7 mile/h
Forward - 4	21.6 mile/h	22.4 mile/h	-	-	-	-	-	-
Reverse - 1	4.7 mile/h	4.5 mile/h	-	-	5 mile/h	-	-	4.7 mile/h
Reverse - 2	8.3 mile/h	8 mile/h	-	-	8 mile/h	-	-	8.1 mile/h
Reverse - 3	14.4 mile/h	14.2 mile/h	-	-	-	-	-	13.9 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	-	-	Lock-up disabled	-	-	Disabled
Direct Drive - Forward 2	7.8 mile/h	-	-	-	8 mile/h	-	-	8 mile/h
Direct Drive - Forward 3	13.9 mile/h	-	-	-	14 mile/h	-	-	14 mile/h
Direct Drive - Forward 4	24.4 mile/h	-	-	-	24 mile/h	-	-	-
Direct Drive - Reverse 1	5 mile/h	-	-	-	Lock-up disabled	-	-	5 mile/h
Direct Drive - Reverse 2	8.9 mile/h	-	-	-	9 mile/h	-	-	8.8 mile/h
Direct Drive - Reverse 3	15.8 mile/h	-	-	-	16 mile/h	-	-	15.3 mile/h
Note	-	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Travel speeds based on 35/65-R33 tires.	-	-	-
Forward and Reverse - Speed Range 3	-	-	25 mile/h	25 mile/h	-	-	-	-
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h	12.5 mile/h	-	-	-	-
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h	6.3 mile/h	-	-	-	-
Direct Drive - Reverse 4	-	-	-	-	25.4 mile/h	-	-	-
Forward 1 (virtual)	-	-	-	-	-	4.3 mile/h	-	-
Forward 2 (virtual)	-	-	-	-	-	7 mile/h	-	-
Forward 3 (virtual)	-	-	-	-	-	13.8 mile/h	-	-
Forward 4 (virtual)	-	-	-	-	-	20 mile/h	-	-
Reverse 1 (virtual)	-	-	-	-	-	4.3 mile/h	-	-
Reverse 2 (virtual)	-	-	-	-	-	7 mile/h	-	-
Reverse 3 (virtual)	-	-	-	-	-	17.5 mile/h	-	-
Travel Speed	-	-	-	-	-	-	12.4 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	-	-	EH - Load Sense	EH-Positive Flow Control, Flow Sharing	-	Positive Flow Control
Lift/Tilt System - Pump	Variable displacement piston	-	-	-	Variable displacement piston	Variable displacement piston	-	Variable Displacement Piston
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	-	-	4598 psi	4757 psi	-	5000 psi
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-	-	190 mm x 1216 mm (7.5 in x 48 in)	-	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	-	-	170 mm x 722 mm (6.7 in x 28.4 in)	-	-	-
Pilot System	Variable displacement piston	-	-	-	Variable displacement piston	-	-	-
Relief Valve Setting - Main	551 psi	-	-	-	-	-	-	-
Maximum Flow at 2,165 rpm	-	-	-	-	159 gal/min	-	-	250 gal/min
Relief Valve Setting	-	-	-	-	500 psi	-	-	-
Maximum Flow at 1,400-1,600 rpm	-	-	-	-	-	153 gpm	-	-
Lift Cylinder - Bore	-	-	-	-	-	8.7 in	-	9.3 in
Lift Cylinder - Stroke	-	-	-	-	-	41.3 in	-	63.5 in
Tilt Cylinder - Bore	-	-	-	-	-	8.7 in	-	11.5 in
Tilt Cylinder - Stroke	-	-	-	-	-	27 in	-	41.5 in
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-	-	-	-	-
Raise	8 s	-	-	-	-	-	-	-
Dump	2.2 s	-	-	-	-	-	-	-
Lower Float Down	3.5 s	-	-	-	-	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-	-	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	-	-	Pilot, load sensing	Pilot, load sensing	-	Pilot, Load Sensing
Steering System - Pump	Piston, variable displacement	-	-	-	Piston, variable displacement	Piston, variable displacement	-	Piston, Variable Displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-	-	71.3 gpm	-	-
Relief Valve Setting - Steering	4351 psi	-	-	-	4000 psi	-	-	-
Total Steering Angle	86 °	-	-	-	70°	86°	-	80°
Steering Cycle Times - High Idle	3.4 s	-	-	-	3 s	3.4 s	-	3.1 s
Steering Cycle Times - Low Idle	5.6 s	-	-	-	5.2 s	5.6 s	-	4.9 s
Maximum Flow at 2,165 rpm	-	-	-	-	52 gal/min	-	-	-
Steering Cut Off Pressure	-	-	-	-	-	4351 psi	-	4500 psi
Maximum Flow at 1,400-1,850 rpm	-	-	-	-	-	-	-	70 gal/min
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	-
Axles
Front	Fixed	-	Fixed; Locking differential (standard)	Fixed; Locking differential (standard)	Fixed	Fixed	-	Fixed
Rear	Trunnion	-	Oscillating ±11 degrees; Locking differential (standard)	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion	Trunnion	-	Trunnion
Oscillation Angle	13 °	-	-	-	+/-12.5°	13°	-	±9°
Brakes
Brakes	ISO 3450:2011	-	-	-	ISO 3450:2011	ISO 3450:2011	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-	73 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	-	-	113 dB(A)	109 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	72 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	-	110 dB(A)	109 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-	74 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	-	-	113 dB(A)	110 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	73 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-	110 dB(A)	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	188 gal (US)	-	43.6 gal (US)	43.6 gal (US)	141 gal (US)	147 gal (US)	11.4 gal (US)	385.7 gal (US)
Cooling System	31.7 gal (US)	13.2 gal (US)	5.7 gal (US)	5.7 gal (US)	27 gal (US)	-	3 gal (US)	-
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-	-	-	-	-
Crankcase	15.9 gal (US)	4.8 gal (US)	-	-	-	-	-	31.7 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-	-	-	-	-
Transmission	24.3 gal (US)	11.9 gal (US)	0.8 gal (US)	0.8 gal (US)	20 gal (US)	16 gal (US)	-	51.5 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-	-	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	10.6 gal (US)	-	-	49 gal (US)	49 gal (US)	-	96.4 gal (US)
Differential - Final Drives - Rear	49.1 gal (US)	10 gal (US)	-	-	45 gal (US)	49 gal (US)	-	96.4 gal (US)
Hydraulic System Factory Fill	125.5 gal (US)	-	-	-	94 gal (US)	-	-	-
Hydraulic System - Tank Only	63.4 gal (US)	-	-	-	-	-	-	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	-	-
DEF Tank	-	4.2 gal (US)	-	-	-	-	-	-
Fuel Tank Size	-	76.6 gal (US)	-	-	-	-	-	-
Hydraulic Tank	-	29.6 gal (US)	14.5 gal (US)	14.5 gal (US)	-	-	-	-
Engine Crankcase	-	-	2.6 gal (US)	2.6 gal (US)	9 gal (US)	16 gal (US)	-	-
Axles - Rear	-	-	4.5 gal (US)	-	-	-	-	-
Hydraulic System - Including Tank	-	-	25.9 gal (US)	25.9 gal (US)	-	-	-	-
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)	4.8 gal (US)	-	-	-	-
Axles - Front	-	-	4.5 gal (US)	-	-	-	-	-
Axles - Front Center Differential	-	-	-	2 gal (US)	-	-	-	-
Axles - Rear Center Differential	-	-	-	2 gal (US)	-	-	-	-
Diesel Exhaust Fluid Tank	-	-	-	-	5.5 gal (US)	8.7 gal (US)	-	-
Cooling System - Jacket Water	-	-	-	-	-	30 gal (US)	-	-
Cooling Systems - Power Train	-	-	-	-	-	8 gal (US)	-	-
Hydraulic System - Implement/Steering	-	-	-	-	-	126 gal (US)	-	-
Hydraulic System	-	-	-	-	-	-	6.3 gal (US)	-
Engine Oil	-	-	-	-	-	-	2.4 gal (US)	-
Cooling Systems	-	-	-	-	-	-	-	59.4 gal (US)
Hydraulic System Factory Fill (Implement)	-	-	-	-	-	-	-	104.1 gal (US)
Hydraulic Tank - Implement	-	-	-	-	-	-	-	60.2 gal (US)
Hydraulic Factory Fill (Steering)	-	-	-	-	-	-	-	32.5 gal (US)
Hydraulic Tank (Steering Tank Only)	-	-	-	-	-	-	-	26.3 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-	-	-	-
Maximum Overall Length	39.3 ft	-	-	-	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-	-	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-	-	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-	-	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-	-	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-	-	-	-
Maximum Overall Length	40.7 ft	-	-	-	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-	-	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-	-	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-	-	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-	-	-	-	-
Weights
Operating Weight	-	41554 lb	21742 lb	18102 lb	-	-	9414 lb	-
Buckets
Bucket Capacities	-	2.9-4.4 m³ (3.75-5.75 yd³)	1.3-3.5 m3 (1.7-4.6 yd3)	1.3-3.5 m3 (1.7-4.6 yd3)	-	-	0.6-1.0 m3 (0.8-1.3 yd3)	11.5-24.5 m³ (15-32 yd³)
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	1.3-1.9 m³ (1.7-2.5 yd³)	-	-	0.6 m3 (0.8 yd3)	-
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	2.5-3.5 m³ (3.3-4.6 yd³)	-	-	1.0 m3 (1.3 yd3)	-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	76 dB(A)*	-	-	-	-	-	-
Note (1)	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-	-	-	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-	-	-	-	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	73 dB(A)	-	-	-	-	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	For machines in European Union countries and in countries that adopt the EU Directives	-	-	-	-	-	-
With Cooling Fan Speed at Maximum Value - Note	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-	-	-	-	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	107 LWA***	-	-	-	-	-	-
Note (3)	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-	-	-	-	-
Note (2)	-	**For machines in European Union countries and in countries that adopt the "EU Directives."	-	-	-	-	-	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	73 dB(A)	-	-	-	-	-	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	109 dB(A)	-	-	-	-	-	-
Dimensions
Rack Back - Ground	-	40 degrees	-	-	-	-	-	-
Height - Top of Exhaust Pipe	-	11.17 ft	-	-	-	-	-	-
Centerline of Rear Axle to Hitch	-	5.42 ft	-	-	-	-	-	-
Lift Arm Clearance	-	12 ft	-	-	-	-	-	-
B-Pin Height	-	13.75 ft	-	-	-	-	-	-
Centerline of Rear Axle to Edge of Counterweight	-	6.75 ft	-	-	-	-	-	-
Ground Clearance	-	1.5 ft	-	-	-	-	-	-
Rack Back - Maximum Lift	-	60 degrees	-	-	-	-	-	-
Height - Top of Hood	-	8.75 ft	-	-	-	-	-	-
Wheel Base	-	10.83 ft	-	-	-	-	-	-
Height - Top of ROPS	-	11.33 ft	-	-	-	-	-	-
Rack Back - Carry	-	45 degrees	-	-	-	-	-	-
Note	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-	-	-	-	-	-
Weights and Operating Specifications
Note (2)	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-	-	-	-	-	-
Tipping Load - Full Turn - Rigid Tires**	-	25875 lb	-	-	-	-	-	-
Breakout Force	-	34638 lbf	-	-	-	-	-	-
Tipping Load - Full Turn - ISO 14397-1*	-	24264 lb	-	-	-	-	-	-
Note (3)	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-	-	-	-	-	-
Operating Weight	-	41554 lb	-	-	-	-	-	-
Note (1)	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-	-	-	-	-	-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	9.4 s	-	-	-	-	-	-
Steering System - Pump Type	-	Piston	-	-	-	-	-	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	4047 psi	-	-	-	-	-	-
Implement System - Maximum Pump Output at 2,390 rpm	-	68 gpm	-	-	-	-	-	-
Main Relief	-	-	-	-	-	-	3481 psi	-
3rd Auxiliary Flow	-	-	-	-	-	-	14 gpm	-
Hydraulic Cycle Time - Lower, Float	-	-	-	-	-	-	2.4 s	-
Engine - Tier 4 Final/Stage IV
Emissions	-	Tier 4/Stage IV	-	-	-	-	-	-
Sustainability
Recyclability	-	-	95%	95%	-	-	97%	-
Cab
ROPS	-	-	ISO 3471:2008	ISO 3471:2008	-	-	ISO 3471:2008	-
FOPS	-	-	ISO 3449:2005	ISO 3449:2005	-	-	ISO 3449:2005 Level I	-
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	-	-
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	-	-
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	-	-
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.	*The measurements were conducted with the cab doors and windows closed.	-	-	-	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	43.6 gpm	32 gpm	-	-	-	-
Relief Pressure - Tilt Cylinder	-	-	4641 psi	4931 psi	-	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	25 gpm	-	-	-	-	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	4641 psi	-	-	-	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	2.7 s	3.7 s	-	-	-	-
Note	-	-	All cycle times listed are with cylinder snubbing turned off.	-	-	-	-	-
Maximum Working Pressure - Implement Pump	-	-	4061 psi	3408 psi	-	-	-	-
Hydraulic Cycle Time - Total Cycle Time	-	-	11.5 s	12.5 s	-	-	-	-
Hydraulic Cycle Time - Rackback	-	-	2.2 s	2.2 s	-	-	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.8 s	1.4 s	-	-	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	4.8 s	5.2 s	-	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	40 gpm	-	-	-	-	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	25 gpm	-	-	-	-	-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	-	3046 psi	-	-	-	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	-	3046 psi	-	-	-	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	-	24 gpm	-	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	-	-	-	24 gpm	-	-	-	-
Hydraulic Cycle Time - Lift	-	-	-	-	-	-	4.4 s	-
Hydraulic Cycle Time - Dump	-	-	-	-	-	-	0.7 s	-
Steering
Maximum Working Pressure - Steering Pump	-	-	3190 psi	2683 psi	-	-	-	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	2.3 s	3.2 s	-	-	-	-
Steering Articulation Angle - Each Direction	-	-	40 °	40 °	-	-	-	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.4 turns	3.75 turns	-	-	-	-
Maximum Flow - Steering Pump	-	-	21.7 gpm	17 gpm	-	-	-	-
Tires
Other Choices Include	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow	-	-	-	-
Standard Size	-	-	17.5 R25 L2 XTLA	15.5 R25 L2 XTLA	-	-	-	-
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.	Other tire choices are available. Contact your Cat dealer for details.	-	-	-	-
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	-	-
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	-	-
Hydraulic Cycle Times
Rack Back	-	-	-	-	3.8 s	4.5 s	-	2.3 s
Raise	-	-	-	-	7.5 s	8 s	-	9 s
Dump	-	-	-	-	3 s	2.2 s	-	2.6 s
Lower Float Down	-	-	-	-	4.6 s	3.5 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	-	18.9 s	-	-	-
Total Hydraulic Cycle Time	-	-	-	-	-	18.2 s	-	17.1 s
Rack Back - High Lift	-	-	-	-	-	-	-	2.3 s
Raise - High Lift	-	-	-	-	-	-	-	9 s
Dump - High Lift	-	-	-	-	-	-	-	2.6 s
Float Down	-	-	-	-	-	-	-	3.2 s
Float Down - High Lift	-	-	-	-	-	-	-	3.2 s
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	-	-	13.5 ft	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	-	-	-	13.3 ft	14.8 ft	-	-
Ground to Top of Hood	-	-	-	-	10.7 ft	10.9 ft	-	-
Ground to Fuel Tank Clearance	-	-	-	-	2.2 ft	-	-	-
Rear Axle - Centerline to Bumper	-	-	-	-	10.3 ft	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	-	-	16.7 ft	15.3 ft	-	-
Wheel Base	-	-	-	-	12.5 ft	14.9 ft	6.42 ft	-
Maximum Overall Length	-	-	-	-	39.5 ft	40.7 ft	-	-
Ground to Lower Hitch Clearance	-	-	-	-	1.5 ft	1.9 ft	-	-
Ground to Center of Front Axle	-	-	-	-	3.2 ft	-	-	-
Clearance at Maximum Lift (45° Dump)	-	-	-	-	12 ft	-	-	-
B-Pin Height - Maximum Lift	-	-	-	-	18.7 ft	19.3 ft	-	-
Maximum Overall Height - Bucket Raised	-	-	-	-	25 ft	25.8 ft	-	-
Reach at Maximum Lift (45° Dump)	-	-	-	-	7.7 ft	-	-	-
Note	-	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-
Ground to Bumper Clearance	-	-	-	-	-	3.1 ft	-	-
Ground to Center of Axles	-	-	-	-	-	3.2 ft	-	-
Clearance at Maximum Lift	-	-	-	-	-	13.3 ft	-	-
Reach - Maximum Lift	-	-	-	-	-	6.8 ft	-	-
Cab Height	-	-	-	-	-	-	8.25 ft	-
Ground Clearance	-	-	-	-	-	-	10 in	-
Overall Length - With Bucket*	-	-	-	-	-	-	16.17 ft	-
Reach at Maximum Dump Height*	-	-	-	-	-	-	2.42 ft	-
Dig Depth	-	-	-	-	-	-	8 in	-
Maximum Dump Height*	-	-	-	-	-	-	8 ft	-
Load Over Height	-	-	-	-	-	-	9.67 ft	-
Hinge Pin at Maximum Height	-	-	-	-	-	-	10.58 ft	-
Departure Angle - Degrees	-	-	-	-	-	-	30°	-
Overall Length - With Forks	-	-	-	-	-	-	17.58 ft	-
Reach - Ground Level	-	-	-	-	-	-	3.25 ft	-
Maximum Reach	-	-	-	-	-	-	4.92 ft	-
Fork Depth Above Ground	-	-	-	-	-	-	2 in	-
Fork Height at Maximum Reach	-	-	-	-	-	-	4.67 ft	-
Maximum Fork Height	-	-	-	-	-	-	10.33 ft	-
Fork Reach at Maximum Height	-	-	-	-	-	-	2 ft	-
Turning Radius - Over Bucket*	-	-	-	-	-	-	13.42 ft	-
Turning Radius - Inside Tire**	-	-	-	-	-	-	5.92 ft	-
Width - Over Bucket*	-	-	-	-	-	-	5.83 ft	-
Tire Gauge	-	-	-	-	-	-	4.33 ft	-
Machine Width**	-	-	-	-	-	-	5.58 ft	-
Articulation Angle	-	-	-	-	-	-	40°	-
Steering Angle	-	-	-	-	-	-	80°	-
Dump Angle at Maximum Height	-	-	-	-	-	-	40°	-
Note (1)	-	-	-	-	-	-	*Vary with bucket size.	-
Note (2)	-	-	-	-	-	-	**Vary with tire size.	-
Note (3)	-	-	-	-	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	-	-	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	-	-	-	-	14.8 ft	-	-
Ground to Top of Hood	-	-	-	-	-	10.9 ft	-	-
Ground to Bumper Clearance	-	-	-	-	-	3.1 ft	-	-
Rear Axle - Centerline to Bumper	-	-	-	-	-	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	-	-	-	14 ft	-	-
Wheel Base	-	-	-	-	-	14.9 ft	6.42 ft	-
Maximum Overall Length	-	-	-	-	-	39.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	-	-	-	1.9 ft	-	-
Ground to Center of Axles	-	-	-	-	-	3.2 ft	-	-
Clearance at Maximum Lift	-	-	-	-	-	11.9 ft	-	-
B-Pin Height - Maximum Lift	-	-	-	-	-	18 ft	-	-
Maximum Overall Height - Bucket Raised	-	-	-	-	-	24.5 ft	-	-
Reach - Maximum Lift	-	-	-	-	-	6.5 ft	-	-
Note	-	-	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-
Cab Height	-	-	-	-	-	-	8.25 ft	-
Ground Clearance	-	-	-	-	-	-	10 in	-
Overall Length - With Bucket*	-	-	-	-	-	-	15.75 ft	-
Reach at Maximum Dump Height*	-	-	-	-	-	-	2.33 ft	-
Dig Depth	-	-	-	-	-	-	6 in	-
Maximum Dump Height*	-	-	-	-	-	-	7.5 ft	-
Load Over Height	-	-	-	-	-	-	9.17 ft	-
Hinge Pin at Maximum Height	-	-	-	-	-	-	10.08 ft	-
Departure Angle - Degrees	-	-	-	-	-	-	30°	-
Overall Length - With Forks	-	-	-	-	-	-	17.08 ft	-
Reach - Ground Level	-	-	-	-	-	-	2.67 ft	-
Maximum Reach	-	-	-	-	-	-	4.5 ft	-
Fork Depth Above Ground	-	-	-	-	-	-	2 in	-
Fork Height at Maximum Reach	-	-	-	-	-	-	4.67 ft	-
Maximum Fork Height	-	-	-	-	-	-	9.83 ft	-
Fork Reach at Maximum Height	-	-	-	-	-	-	2 ft	-
Turning Radius - Over Bucket*	-	-	-	-	-	-	13.17 ft	-
Turning Radius - Inside Tire**	-	-	-	-	-	-	5.92 ft	-
Width - Over Bucket*	-	-	-	-	-	-	5.83 ft	-
Tire Gauge	-	-	-	-	-	-	4.33 ft	-
Machine Width**	-	-	-	-	-	-	5.58 ft	-
Articulation Angle	-	-	-	-	-	-	40°	-
Steering Angle	-	-	-	-	-	-	80°	-
Dump Angle at Maximum Height	-	-	-	-	-	-	40°	-
Note (1)	-	-	-	-	-	-	*Vary with bucket size.	-
Note (2)	-	-	-	-	-	-	**Vary with tire size.	-
Note (3)	-	-	-	-	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	-	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	-	-	-	-	13.8 ft	-	-
Ground to Top of Hood	-	-	-	-	-	10.9 ft	-	-
Ground to Bumper Clearance	-	-	-	-	-	3.1 ft	-	-
Rear Axle - Centerline to Bumper	-	-	-	-	-	10.5 ft	-	-
Front Axle Centerline to Fork Tip	-	-	-	-	-	16.5 ft	-	-
Wheel Base	-	-	-	-	-	14.9 ft	-	-
Maximum Overall Length	-	-	-	-	-	41.9 ft	-	-
Ground to Lower Hitch Clearance	-	-	-	-	-	1.9 ft	-	-
Ground to Center of Front Axle	-	-	-	-	-	3.2 ft	-	-
Fork Height with Level Arms	-	-	-	-	-	8.1 ft	-	-
Fork Top Clamp Opening	-	-	-	-	-	13.1 ft	-	-
Fork Height at Maximum Lift	-	-	-	-	-	17.2 ft	-	-
Hinge Pin Height at Maximum Lift	-	-	-	-	-	16.1 ft	-	-
Dump Angle at Maximum Lift	-	-	-	-	-	-39.4 °	-	-
Operating Specifications - Standard Lift
Tire Size	-	-	-	-	-	-	33 × 15.5-16.5, 12 PR	-
Rated Bucket Capacity	-	-	-	-	-	-	0.8 yd³	-
Breakout Force	-	-	-	-	-	-	6160 lbf	-
Operating Weight	-	-	-	-	-	-	9414 lb	-
Rated Operating Load at Full Turn - Bucket***	-	-	-	-	-	-	2701 lb	-
Straight Tipping Load - Bucket***	-	-	-	-	-	-	6415 lb	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	-	-	-	-	5401 lb	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	-	-	-	-	5512 lb	-
Rack Back - Transport Position	-	-	-	-	-	-	51°	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	-	-	-	-	3366 lb	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	-	-	-	-	2524 lb	-
Note (1)	-	-	-	-	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-
Note (2)	-	-	-	-	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-
Note (3)	-	-	-	-	-	-	***Manual quick coupler, precleaner hood.	-
Note (4)	-	-	-	-	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-
Operating Specifications - High Lift
Tire Size	-	-	-	-	-	-	33 × 15.5-16.5, 12 PR	-
Rated Bucket Capacity	-	-	-	-	-	-	0.8 yd³	-
Breakout Force	-	-	-	-	-	-	6204 lbf	-
Operating Weight	-	-	-	-	-	-	9462 lb	-
Rated Operating Load at Full Turn - Bucket***	-	-	-	-	-	-	2502 lb	-
Straight Tipping Load - Bucket***	-	-	-	-	-	-	5975 lb	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	-	-	-	-	5004 lb	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	-	-	-	-	5115 lb	-
Rack Back - Transport Position	-	-	-	-	-	-	51°	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	-	-	-	-	3148 lb	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	-	-	-	-	2361 lb	-
Note (1)	-	-	-	-	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-
Note (2)	-	-	-	-	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-
Note (3)	-	-	-	-	-	-	***Manual quick coupler, precleaner hood.	-
Note (4)	-	-	-	-	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-
Maximum Material Densities - General Purpose
Bucket Type	-	-	-	-	-	-	General Purpose	-
Rated Capacity	-	-	-	-	-	-	0.8 yd³	-
Dump Height	-	-	-	-	-	-	90 in	-
Maximum Material Density	-	-	-	-	-	-	3169 lb/yd³	-
Bucket Width	-	-	-	-	-	-	70 in	-
Note	-	-	-	-	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-
Maximum Material Densities - Light Material
Bucket Type	-	-	-	-	-	-	Light Material	-
Rated Capacity	-	-	-	-	-	-	1.3 yd³	-
Dump Height	-	-	-	-	-	-	85 in	-
Maximum Material Density	-	-	-	-	-	-	1989 lb/yd³	-
Bucket Width	-	-	-	-	-	-	74 in	-
Note	-	-	-	-	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	-	-	-	-	-	109.4 °F
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	-	-	-	-	-	131 °F
Sound Performance - Standard
Note	-	-	-	-	-	-	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)
Sound Performance - Suppression
Note	-	-	-	-	-	-	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	-	-	-	-	-	-	17 ft
Ground to Top of ROPS	-	-	-	-	-	-	-	18.3 ft
Ground to Top of Hood	-	-	-	-	-	-	-	13.1 ft
Ground to Center of Front Axle	-	-	-	-	-	-	-	4.3 ft
Ground to Bumper Clearance	-	-	-	-	-	-	-	3.8 ft
Ground to Lower Hitch Clearance	-	-	-	-	-	-	-	2.2 ft
Reach - Maximum Lift	-	-	-	-	-	-	-	8.2 ft
Clearance at Maximum Lift	-	-	-	-	-	-	-	15.2 ft
B-Pin Height - Maximum Lift	-	-	-	-	-	-	-	22.8 ft
Maximum Overall Height - Bucket Raised	-	-	-	-	-	-	-	30.8 ft
Rear Axle - Centerline to Bumper	-	-	-	-	-	-	-	13.5 ft
Tread Width	-	-	-	-	-	-	-	10.83 ft
Rack Back Angle - Maximum Lift	-	-	-	-	-	-	-	56.9 degrees
Dump Angle at Maximum Lift	-	-	-	-	-	-	-	-49.5 degrees
Rack Back Angle - Ground Level	-	-	-	-	-	-	-	40.2 degrees
Width - Over Tires - With Bulge	-	-	-	-	-	-	-	14.74 ft
Rack Back Angle - Carry	-	-	-	-	-	-	-	48.9 degrees
Wheel Base	-	-	-	-	-	-	-	19.3 ft
Maximum Overall Length	-	-	-	-	-	-	-	50.8 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	-	-	-	18 ft
Dimensions - High Lift - Approximate
Tread Width	-	-	-	-	-	-	-	10.83 ft
Rack Back Angle - Ground Level	-	-	-	-	-	-	-	42.5 degrees
Dump Angle at Maximum Lift	-	-	-	-	-	-	-	-48.1 degrees
Rack Back Angle - Maximum Lift	-	-	-	-	-	-	-	56.2 degrees
Width - Over Tires - With Bulge	-	-	-	-	-	-	-	14.75 ft
Rack Back Angle - Carry	-	-	-	-	-	-	-	51.6 degrees
Ground to Top of Exhaust Stacks	-	-	-	-	-	-	-	17 ft
Ground to Top of ROPS	-	-	-	-	-	-	-	18.3 ft
Ground to Top of Hood	-	-	-	-	-	-	-	13.1 ft
Ground to Center of Front Axle	-	-	-	-	-	-	-	4.3 ft
Ground to Bumper Clearance	-	-	-	-	-	-	-	3.8 ft
Ground to Lower Hitch Clearance	-	-	-	-	-	-	-	2.2 ft
Reach - Maximum Lift	-	-	-	-	-	-	-	7.6 ft
Clearance at Maximum Lift	-	-	-	-	-	-	-	17.2 ft
B-Pin Height - Maximum Lift	-	-	-	-	-	-	-	24.5 ft
Maximum Overall Height - Bucket Raised	-	-	-	-	-	-	-	32 ft
Rear Axle - Centerline to Bumper	-	-	-	-	-	-	-	13.5 ft
Wheel Base	-	-	-	-	-	-	-	19.3 ft
Maximum Overall Length	-	-	-	-	-	-	-	51.6 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	-	-	-	18.8 ft

Compare Equipment Go Back

988 Wheel Loader

950 GC Wheel Loader | Front Loader

920 Compact Wheel Loader

910 Compact Wheel Loader

988 GC Wheel Loader

988 XE Wheel Loader

903D Compact Wheel Loader

992 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Hydraulic Cycle Times

Dimensions (Approximate) - High Lift

Dimensions (Approximate) - Standard Lift

Dimensions - Millyard Linkage

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate