Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio
-
-
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
-
-
Net Power - ISO 9249
-
225 hp
-
Emissions
-
Tier 4/Stage V
-
Note
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
-
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric
-
228 hp
-
Maximum Power - 1,700 rpm - ISO 14396
-
240 hp
-
Maximum Power - 1,700 rpm - ISO 14396 - Metric
-
243 hp
-
Peak Gross Torque - 1,400 rpm - SAE J1995
-
811 ft·lbf
-
Peak Gross Torque - 1,400 rpm - ISO 14396
-
805 ft·lbf
-
Maximum Net Power - 1,700 rpm - ISO 9249
-
225 hp
-
Maximum Net Power - 1,700 rpm - SAE J1349
-
225 hp
-
Maximum Power - 1,700 rpm - SAE J1995
-
241 hp
-
Operating Specifications
Operating Weight
112574 lb
-
-
Bucket Capacity Range
4.7-13 m3 (6.2-17 yd3)
-
-
Rated Payload - Quarry Face
12.5 t
-
-
Rated Payload - Loose Material
16 t
-
-
Cat Truck Match - Standard
770 - 772
-
-
Cat Truck Match - High Lift
773 - 775
-
-
Transmission
Transmission Type
Cat planetary powershift
-
-
Forward - 1
4 mile/h
4.5 mile/h
-
Forward - 2
7.2 mile/h
8 mile/h
-
Forward - 3
12.7 mile/h
14.2 mile/h
-
Forward - 4
21.6 mile/h
22.4 mile/h
-
Reverse - 1
4.7 mile/h
4.5 mile/h
-
Reverse - 2
8.3 mile/h
8 mile/h
-
Reverse - 3
14.4 mile/h
14.2 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
7.8 mile/h
-
-
Direct Drive - Forward 3
13.9 mile/h
-
-
Direct Drive - Forward 4
24.4 mile/h
-
-
Direct Drive - Reverse 1
5 mile/h
-
-
Direct Drive - Reverse 2
8.9 mile/h
-
-
Direct Drive - Reverse 3
15.8 mile/h
-
-
Note
-
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH- Positive Flow Control, Flow Sharing
-
-
Lift/Tilt System - Pump
Variable displacement piston
-
-
Maximum Flow at 1,400-1,860 rpm
153 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4757 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
210 mm × 1050 mm (8.7 in × 41.3 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
266 mm × 685 mm (8.7 in × 27 in)
-
-
Pilot System
Variable displacement piston
-
-
Relief Valve Setting - Main
551 psi
-
-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back
4.5 s
-
-
Raise
8 s
-
-
Dump
2.2 s
-
-
Lower Float Down
3.5 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
18.2 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow at 1,400-1,600 rpm
71.3 gal/min
-
-
Relief Valve Setting - Steering
4351 psi
-
-
Total Steering Angle
86 °
-
-
Steering Cycle Times - High Idle
3.4 s
-
-
Steering Cycle Times - Low Idle
5.6 s
-
-
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system
-
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Oscillation Angle
13 °
-
-
Brakes
Brakes
ISO 3450:2011
-
-
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
111 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
109 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
112 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Service Refill Capacities
Fuel Tank
188 gal (US)
-
-
Cooling System
31.7 gal (US)
13.2 gal (US)
-
Coolant (Validated by Test Cell Fill Quantities)
33 gal (US)
-
-
Crankcase
15.9 gal (US)
4.8 gal (US)
-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.7 gal (US)
-
-
Transmission
24.3 gal (US)
11.9 gal (US)
-
Transmission - Validated by Test Cell Fill Quantities
29 gal (US)
-
-
Differential - Final Drives - Front
49.1 gal (US)
10.6 gal (US)
-
Differential - Final Drives - Rear
49.1 gal (US)
10 gal (US)
-
Hydraulic System Factory Fill
125.5 gal (US)
-
-
Hydraulic System - Tank Only
63.4 gal (US)
-
-
Note
• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester
-
-
DEF Tank
-
4.2 gal (US)
-
Fuel Tank Size
-
76.6 gal (US)
-
Hydraulic Tank
-
29.6 gal (US)
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
13.8 ft
-
-
Ground to Top of Exhaust Stacks
14.8 ft
-
-
Ground to Top of Hood
10.9 ft
-
-
Rear Axle - Centerline to Bumper
10.5 ft
-
-
Front Axle Centerline to Bucket Tip
14 ft
-
-
Wheel Base
14.9 ft
-
-
Maximum Overall Length
39.3 ft
-
-
Ground to Lower Hitch Clearance
1.9 ft
-
-
Clearance at Maximum Lift
11.9 ft
-
-
B-Pin Height - Maximum Lift
18 ft
-
-
Maximum Overall Height - Bucket Raised
24.5 ft
-
-
Reach - Maximum Lift
6.5 ft
-
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
13.8 ft
-
-
Ground to Top of Exhaust Stacks
14.8 ft
-
-
Ground to Top of Hood
10.9 ft
-
-
Rear Axle - Centerline to Bumper
10.5 ft
-
-
Front Axle Centerline to Bucket Tip
15.3 ft
-
-
Wheel Base
14.9 ft
-
-
Maximum Overall Length
40.7 ft
-
-
Ground to Lower Hitch Clearance
1.9 ft
-
-
Clearance at Maximum Lift
13.3 ft
-
-
B-Pin Height - Maximum Lift
19.3 ft
-
-
Maximum Overall Height - Bucket Raised
25.8 ft
-
-
Reach - Maximum Lift
6.8 ft
-
-
Weights
Operating Weight
-
41554 lb
-
Buckets
Bucket Capacities
-
2.9-4.4 m³ (3.75-5.75 yd³)
-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
-
76 dB(A)*
-
Note (1)
-
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)
-
European Union Directive "2000/14/EC" as amended by "2005/88/EC."
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
-
73 dB(A)
-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)
-
For machines in European Union countries and in countries that adopt the EU Directives
-
With Cooling Fan Speed at Maximum Value - Note
-
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
-
107 LWA***
-
Note (3)
-
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
-
Note (2)
-
**For machines in European Union countries and in countries that adopt the "EU Directives."
-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
73 dB(A)
-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
-
109 dB(A)
-
Dimensions
Rack Back - Ground
-
40 degrees
-
Height - Top of Exhaust Pipe
-
11.17 ft
-
Centerline of Rear Axle to Hitch
-
5.42 ft
-
Lift Arm Clearance
-
12 ft
-
B-Pin Height
-
13.75 ft
-
Centerline of Rear Axle to Edge of Counterweight
-
6.75 ft
-
Ground Clearance
-
1.5 ft
-
Rack Back - Maximum Lift
-
60 degrees
-
Height - Top of Hood
-
8.75 ft
-
Wheel Base
-
10.83 ft
-
Height - Top of ROPS
-
11.33 ft
-
Rack Back - Carry
-
45 degrees
-
Note
-
All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
-
Weights and Operating Specifications
Note (2)
-
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Tipping Load - Full Turn - Rigid Tires**
-
25875 lb
-
Breakout Force
-
34638 lbf
-
Tipping Load - Full Turn - ISO 14397-1*
-
24264 lb
-
Note (3)
-
**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
-
Operating Weight
-
41554 lb
-
Note (1)
-
For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
-
9.4 s
-
Steering System - Pump Type
-
Piston
-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)
-
4047 psi
-
Implement System - Maximum Pump Output at 2,390 rpm
