Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	914 Compact Wheel Loader View Product Remove	903D Compact Wheel Loader View Product Remove	990 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	986 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	752 hp	-	449 hp
Engine Model	Cat® C18	Cat C3.6	Cat C2.4*	Cat® C27	Cat C3.6	Cat® C15
Rated Speed	1700/rpm	-	-	1800 r/min	-	2000
Peak Power Speed	1500/rpm	-	-	-	-	1600
Gross Power - SAE J1995:2014	588 hp	-	-	766 hp	-	456 hp
Net Power - SAE J1349:2011	538 hp	-	-	-	-	373 hp
Bore	5.7 in	3.85 in	3.4 in	5.4 in	3.85 in	5.4 in
Stroke	7.2 in	4.72 in	4 in	6 in	4.72 in	6.75 in
Displacement	1105 in³	220 in³	147 in²	1649.5 in³	220 in³	927 in²
Peak Torque - 1,200 rpm	2104 lbf·ft	-	-	2624 lb/ft	-	-
Torque Rise	58 %	-	-	18 %	-	16%
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	-	-	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Maximum Gross Power	-	110 hp	42 hp	-	121 hp	-
Rated Net Power - Rated Engine Speed	-	2200 r/min	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	1800 r/min	-	-	2200 r/min	-
Rated Net Power - SAE J1349	-	99 hp	-	-	120 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	112 hp	-	-	122 hp	-
Rated Net Power - ISO 9249	-	98 hp	-	-	118 hp	-
Maximum Gross Torque - SAE J1995	-	335 ft·lbf	-	-	372 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	332 ft·lbf	-	-	369 ft·lbf	-
Maximum Net Torque - SAE J1349	-	329 ft·lbf	-	-	366 ft·lbf	-
Maximum Net Torque - ISO 9249	-	327 ft·lbf	-	-	363 ft·lbf	-
Emissions	-	Engine meets Tier 4 Final/Stage V emission standards.	-	Option 2 - Emits equivalent to U.S. EPA Tier 2	Engine meets Tier 4 Final/Stage V emission standards.	-
Note	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	*Engine meets U.S. EPA Tier 4 Final emission standards.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Maximum Gross Power - ISO 14396	-	110 hp	-	-	121 hp	-
Gross Power	-	-	42 hp	-	-	-
Net Power - 2,200 rpm - SAE J1349 R-ing	-	-	40 hp	-	-	-
Net Power - 2,200 rpm - ISO 9249 R-ing	-	-	40 hp	-	-	-
Net Power - SAE J1349:2011 - Standard Ambient	-	-	-	699 hp	-	-
Net Power - SAE J1349:2011 - High Ambient	-	-	-	648 hp	-	-
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	-	-	373 hp
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	-	-	373 hp
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	-	-	1778 lb/ft
Operating Specifications
Operating Weight	112574 lb	-	-	-	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	-	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	-	5.0-10.3 m³ (6.5-13.5 yd³)
Rated Payload - Quarry Face	12.5 t	-	-	-	-	-
Rated Payload - Loose Material	16 t	-	-	-	-	-
Cat Truck Match - Standard	770 - 772	-	-	773-775	-	770/735/740/745
Cat Truck Match - High Lift	773 - 775	-	-	775-777	-	772/773
Operating Weight - Standard	-	-	-	178517 lb	-	97785 lb
Rated Payload - Standard	-	-	-	17.5 ton (US)	-	-
Rated Payload - High Lift	-	-	-	17.5 ton (US)	-	-
Operating Weight - High Lift	-	-	-	-	-	104005 lb
Rated Payload - Standard (Quarry Face)	-	-	-	-	-	11 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	-	-	14 ton (US)
Rated Payload - High Lift (Quarry Face)	-	-	-	-	-	11 ton (US)
Rated Payload - Loose Material (High Lift)	-	-	-	-	-	12.1 ton (US)
Transmission
Transmission Type	Cat planetary powershift	-	-	Cat planetary power shift	-	Cat planetary power shift
Forward - 1	4 mile/h	-	-	4.6 mile/h	-	5 mile/h
Forward - 2	7.2 mile/h	-	-	8.2 mile/h	-	8 mile/h
Forward - 3	12.7 mile/h	-	-	14.5 mile/h	-	-
Forward - 4	21.6 mile/h	-	-	-	-	-
Reverse - 1	4.7 mile/h	-	-	5.1 mile/h	-	5 mile/h
Reverse - 2	8.3 mile/h	-	-	9.1 mile/h	-	8 mile/h
Reverse - 3	14.4 mile/h	-	-	16 mile/h	-	-
Direct Drive - Forward 1	Lock-up disabled	-	-	Lock-up disabled	-	-
Direct Drive - Forward 2	7.8 mile/h	-	-	8.2 mile/h	-	8 mile/h
Direct Drive - Forward 3	13.9 mile/h	-	-	14.5 mile/h	-	14 mile/h
Direct Drive - Forward 4	24.4 mile/h	-	-	-	-	24 mile/h
Direct Drive - Reverse 1	5 mile/h	-	-	5.1 mile/h	-	-
Direct Drive - Reverse 2	8.9 mile/h	-	-	9.1 mile/h	-	9 mile/h
Direct Drive - Reverse 3	15.8 mile/h	-	-	16 mile/h	-	16 mile/h
Note	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-
Forward and Reverse - Speed Range 3	-	25 mile/h	-	-	25 mile/h	-
Forward and Reverse - Speed Range 1*	-	6.3 mile/h	-	-	6.3 mile/h	-
Forward and Reverse - Speed Range 2*	-	12.5 mile/h	-	-	12.5 mile/h	-
Travel Speed	-	-	12.4 mile/h	-	-	-
Direct Drive - Reverse 4	-	-	-	-	-	25.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	-	Positive flow control	-	Load Sense
Lift/Tilt System - Pump	Variable displacement piston	-	-	-	-	2 × 110 cc variable displacement
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	-	4786 psi	-	4050 psi
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-	235 mm × 1287 mm (9.3 in × 50.7 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	-	292.1 mm × 820 mm (11.5 in × 32.3 in)	-	-
Pilot System	Variable displacement piston	-	-	Open loop and pressure reducing	-	-
Relief Valve Setting - Main	551 psi	-	-	-	-	-
Lift/Tilt System	-	-	-	Variable displacement piston	-	-
Maximum Flow at 1,800 rpm	-	-	-	240 gpm	-	-
Pilot Relief Setting	-	-	-	507 psi	-	-
Maximum Flow at 2,165 rpm	-	-	-	-	-	123 gpm
Lift Cylinder - Bore	-	-	-	-	-	7.5 in
Lift Cylinder - Stroke	-	-	-	-	-	45 in
Tilt Cylinder - Bore	-	-	-	-	-	6.7 in
Tilt Cylinder - Stroke	-	-	-	-	-	28.4 in
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-	-	-
Raise	8 s	-	-	-	-	-
Dump	2.2 s	-	-	-	-	-
Lower Float Down	3.5 s	-	-	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	-	Pilot, load sensing	-	Load Sense
Steering System - Pump	Piston, variable displacement	-	-	Piston, variable displacement	-	Piston, variable displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-	-	-
Relief Valve Setting - Steering	4351 psi	-	-	5004 psi	-	-
Total Steering Angle	86 °	-	-	70°	-	70°
Steering Cycle Times - High Idle	3.4 s	-	-	-	-	-
Steering Cycle Times - Low Idle	5.6 s	-	-	-	-	-
Maximum Flow at 1,400 rpm	-	-	-	96.2 gpm	-	52 gpm
Steering Cut Off Pressure	-	-	-	-	-	4000 psi
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
Front	Fixed	Fixed; Locking differential (standard)	-	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	-	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion
Oscillation Angle	13 °	-	-	8.5°	-	±12.5°
Oscillation Angle - Chain Arrangement	-	-	-	-	-	±8.5°
Brakes
Brakes	ISO 3450:2011	-	-	ISO 3450: 2011	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	72 dB(A)	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	-	116 dB(A)	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	-	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	*Sound suppression equipped	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	114 dB(A)	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-	-	74 dB(A)
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	-	-	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Service Refill Capacities
Fuel Tank	188 gal (US)	43.6 gal (US)	11.4 gal (US)	281 gal (US)	43.6 gal (US)	141 gal (US)
Cooling System	31.7 gal (US)	5.7 gal (US)	3 gal (US)	54.9 gal (US)	5.7 gal (US)	-
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-	-	-
Crankcase	15.9 gal (US)	-	-	-	-	9 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-	-	-
Transmission	24.3 gal (US)	0.8 gal (US)	-	29.1 gal (US)	0.8 gal (US)	20 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	-	-	71.6 gal (US)	-	-
Differential - Final Drives - Rear	49.1 gal (US)	-	-	68.9 gal (US)	-	-
Hydraulic System Factory Fill	125.5 gal (US)	-	-	210 gal (US)	-	87 gal (US)
Hydraulic System - Tank Only	63.4 gal (US)	-	-	-	-	34 gal (US)
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-
Axles - Rear Center Differential	-	2 gal (US)	-	-	-	-
Hydraulic System - Including Tank	-	25.9 gal (US)	-	-	25.9 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	4.8 gal (US)	-	-	4.8 gal (US)	-
Engine Crankcase	-	2.6 gal (US)	-	20 gal (US)	2.6 gal (US)	-
Hydraulic Tank	-	14.5 gal (US)	-	-	14.5 gal (US)	-
Axles - Front Center Differential	-	2 gal (US)	-	-	-	-
Hydraulic System	-	-	6.3 gal (US)	-	-	-
Engine Oil	-	-	2.4 gal (US)	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	68.9 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	-	-	34.9 gal (US)	-	-
Axles - Rear	-	-	-	-	4.5 gal (US)	-
Axles - Front	-	-	-	-	4.5 gal (US)	-
Fuel Tank - Short Lift	-	-	-	-	-	127 gal (US)
Cooling Systems	-	-	-	-	-	26 gal (US)
Diesel Exhaust Fluid Tank	-	-	-	-	-	6 gal (US)
Axle Oil - Differentials and Final Drives - Front	-	-	-	-	-	49 gal (US)
Axle Oil - Differentials and Final Drives - Rear	-	-	-	-	-	45 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	17.2 ft	-	13.5 ft
Ground to Top of Exhaust Stacks	14.8 ft	-	-	16.6 ft	-	13.3 ft
Ground to Top of Hood	10.9 ft	-	-	12.7 ft	-	10.7 ft
Rear Axle - Centerline to Bumper	10.5 ft	-	-	12.5 ft	-	10.3 ft
Front Axle Centerline to Bucket Tip	14 ft	-	-	15.4 ft	-	13.8 ft
Wheel Base	14.9 ft	-	-	15.1 ft	-	12.5 ft
Maximum Overall Length	39.3 ft	-	-	42.9 ft	-	36.6 ft
Ground to Lower Hitch Clearance	1.9 ft	-	-	2 ft	-	1.5 ft
Clearance at Maximum Lift	11.9 ft	-	-	7.2 ft	-	10.1 ft
B-Pin Height - Maximum Lift	18 ft	-	-	19.7 ft	-	16.1 ft
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	27.2 ft	-	22.4 ft
Reach - Maximum Lift	6.5 ft	-	-	7.2 ft	-	7.1 ft
Ground to Bumper Clearance	-	-	-	3.5 ft	-	-
Ground to Center of Front Axle	-	-	-	4.2 ft	-	3.2 ft
Rack Back Angle at Ground Level	-	-	-	40.4°	-	-
Rack Back Angle at Carry	-	-	-	48.8°	-	-
Rack Angle at Maximum Lift	-	-	-	63.7°	-	-
Dump Angle at Maximum Lift	-	-	-	45°	-	-
Note	-	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	17.2 ft	-	13.5 ft
Ground to Top of Exhaust Stacks	14.8 ft	-	-	16.6 ft	-	13.3 ft
Ground to Top of Hood	10.9 ft	-	-	12.7 ft	-	10.7 ft
Rear Axle - Centerline to Bumper	10.5 ft	-	-	12.5 ft	-	10.3 ft
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	17.8 ft	-	15.3 ft
Wheel Base	14.9 ft	-	-	15.1 ft	-	12.5 ft
Maximum Overall Length	40.7 ft	-	-	45.3 ft	-	38 ft
Ground to Lower Hitch Clearance	1.9 ft	-	-	2 ft	-	1.5 ft
Clearance at Maximum Lift	13.3 ft	-	-	14.8 ft	-	11.6 ft
B-Pin Height - Maximum Lift	19.3 ft	-	-	21.2 ft	-	17.6 ft
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	28.7 ft	-	23.9 ft
Reach - Maximum Lift	6.8 ft	-	-	8.5 ft	-	7.4 ft
Ground to Bumper Clearance	-	-	-	3.5 ft	-	-
Ground to Center of Front Axle	-	-	-	4.2 ft	-	3.2 ft
Rack Back Angle at Ground Level	-	-	-	39.9°	-	-
Rack Back Angle at Carry	-	-	-	49.3°	-	-
Rack Angle at Maximum Lift	-	-	-	60.6°	-	-
Dump Angle at Maximum Lift	-	-	-	51°	-	-
Note	-	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Weights
Operating Weight	-	19103 lb	9414 lb	-	21742 lb	-
Buckets
Bucket Capacities	-	1.3-3.5 m3 (1.7-4.6 yd3)	0.6-1.0 m3 (0.8-1.3 yd3)	-	1.3-3.5 m3 (1.7-4.6 yd3)	-
Bucket Capacities - General Purpose	-	1.3-1.9 m³ (1.7-2.5 yd³)	0.6 m3 (0.8 yd3)	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	2.5-3.5 m³ (3.3-4.6 yd³)	1.0 m3 (1.3 yd3)	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Sustainability
Recyclability	-	95%	97%	-	95%	-
Cab
ROPS	-	ISO 3471:2008	ISO 3471:2008	-	ISO 3471:2008	-
FOPS	-	ISO 3449:2005	ISO 3449:2005 Level I	-	ISO 3449:2005	-
Note (4)	-	*The measurements were conducted with the cab doors and windows closed.	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Note (2)	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (3)	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (1)	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Steering
Maximum Flow - Steering Pump	-	22 gpm	-	-	21.7 gpm	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	3.75 turns	-	-	3.4 turns	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	2.8 s	-	-	2.3 s	-
Maximum Working Pressure - Steering Pump	-	3263 psi	-	-	3190 psi	-
Steering Articulation Angle - Each Direction	-	40 °	-	-	40 °	-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	3046 psi	-	-	-	-
Maximum Flow - Implement Pump	-	39 gpm	-	-	43.6 gpm	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	24 gpm	-	-	25 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	3046 psi	-	-	-	-
Hydraulic Cycle Time - Total Cycle Time	-	12.5 s	-	-	11.5 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	5.2 s	-	-	4.8 s	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	24 gpm	-	-	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	1.4 s	-	-	1.8 s	-
Relief Pressure - Tilt Cylinder	-	4931 psi	-	-	4641 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	32 gpm	-	-	40 gpm	-
Maximum Working Pressure - Implement Pump	-	4061 psi	-	-	4061 psi	-
Hydraulic Cycle Time - Rackback	-	2.2 s	-	-	2.2 s	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	3.7 s	-	-	2.7 s	-
Hydraulic Cycle Time - Lift	-	-	4.4 s	-	-	-
Hydraulic Cycle Time - Dump	-	-	0.7 s	-	-	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	-	4641 psi	-
Note	-	-	-	-	All cycle times listed are with cylinder snubbing turned off.	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	-	25 gpm	-
Tires
Other Choices Include	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-
Note (1)	-	Other tire choices are available. Contact your Cat dealer for details.	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Standard Size	-	17.5 R25 L2 XTLA	-	-	17.5 R25 L2 XTLA	-
Note (3)	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Hydraulic System
Main Relief	-	-	3481 psi	-	-	-
3rd Auxiliary Flow	-	-	14 gpm	-	-	-
Hydraulic Cycle Time - Lower, Float	-	-	2.4 s	-	-	-
Dimensions (Approximate) - Standard Lift
Cab Height	-	-	8.25 ft	-	-	-
Ground Clearance	-	-	10 in	-	-	-
Wheel Base	-	-	6.42 ft	-	-	-
Overall Length - With Bucket*	-	-	15.75 ft	-	-	-
Reach at Maximum Dump Height*	-	-	2.33 ft	-	-	-
Dig Depth	-	-	6 in	-	-	-
Maximum Dump Height*	-	-	7.5 ft	-	-	-
Load Over Height	-	-	9.17 ft	-	-	-
Hinge Pin at Maximum Height	-	-	10.08 ft	-	-	-
Departure Angle - Degrees	-	-	30°	-	-	-
Overall Length - With Forks	-	-	17.08 ft	-	-	-
Reach - Ground Level	-	-	2.67 ft	-	-	-
Maximum Reach	-	-	4.5 ft	-	-	-
Fork Depth Above Ground	-	-	2 in	-	-	-
Fork Height at Maximum Reach	-	-	4.67 ft	-	-	-
Maximum Fork Height	-	-	9.83 ft	-	-	-
Fork Reach at Maximum Height	-	-	2 ft	-	-	-
Turning Radius - Over Bucket*	-	-	13.17 ft	-	-	-
Turning Radius - Inside Tire**	-	-	5.92 ft	-	-	-
Width - Over Bucket*	-	-	5.83 ft	-	-	-
Tire Gauge	-	-	4.33 ft	-	-	-
Machine Width**	-	-	5.58 ft	-	-	-
Articulation Angle	-	-	40°	-	-	-
Steering Angle	-	-	80°	-	-	-
Dump Angle at Maximum Height	-	-	40°	-	-	-
Note (1)	-	-	*Vary with bucket size.	-	-	-
Note (2)	-	-	**Vary with tire size.	-	-	-
Note (3)	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-	-
Dimensions (Approximate) - High Lift
Cab Height	-	-	8.25 ft	-	-	-
Ground Clearance	-	-	10 in	-	-	-
Wheel Base	-	-	6.42 ft	-	-	-
Overall Length - With Bucket*	-	-	16.17 ft	-	-	-
Reach at Maximum Dump Height*	-	-	2.42 ft	-	-	-
Dig Depth	-	-	8 in	-	-	-
Maximum Dump Height*	-	-	8 ft	-	-	-
Load Over Height	-	-	9.67 ft	-	-	-
Hinge Pin at Maximum Height	-	-	10.58 ft	-	-	-
Departure Angle - Degrees	-	-	30°	-	-	-
Overall Length - With Forks	-	-	17.58 ft	-	-	-
Reach - Ground Level	-	-	3.25 ft	-	-	-
Maximum Reach	-	-	4.92 ft	-	-	-
Fork Depth Above Ground	-	-	2 in	-	-	-
Fork Height at Maximum Reach	-	-	4.67 ft	-	-	-
Maximum Fork Height	-	-	10.33 ft	-	-	-
Fork Reach at Maximum Height	-	-	2 ft	-	-	-
Turning Radius - Over Bucket*	-	-	13.42 ft	-	-	-
Turning Radius - Inside Tire**	-	-	5.92 ft	-	-	-
Width - Over Bucket*	-	-	5.83 ft	-	-	-
Tire Gauge	-	-	4.33 ft	-	-	-
Machine Width**	-	-	5.58 ft	-	-	-
Articulation Angle	-	-	40°	-	-	-
Steering Angle	-	-	80°	-	-	-
Dump Angle at Maximum Height	-	-	40°	-	-	-
Note (1)	-	-	*Vary with bucket size.	-	-	-
Note (2)	-	-	**Vary with tire size.	-	-	-
Note (3)	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-	-
Operating Specifications - Standard Lift
Tire Size	-	-	33 × 15.5-16.5, 12 PR	-	-	-
Rated Bucket Capacity	-	-	0.8 yd³	-	-	-
Breakout Force	-	-	6160 lbf	-	-	-
Operating Weight	-	-	9414 lb	-	-	-
Rated Operating Load at Full Turn - Bucket***	-	-	2701 lb	-	-	-
Straight Tipping Load - Bucket***	-	-	6415 lb	-	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	5401 lb	-	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	5512 lb	-	-	-
Rack Back - Transport Position	-	-	51°	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	3366 lb	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	2524 lb	-	-	-
Note (1)	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-	-
Note (2)	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-	-
Note (3)	-	-	***Manual quick coupler, precleaner hood.	-	-	-
Note (4)	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-	-
Operating Specifications - High Lift
Tire Size	-	-	33 × 15.5-16.5, 12 PR	-	-	-
Rated Bucket Capacity	-	-	0.8 yd³	-	-	-
Breakout Force	-	-	6204 lbf	-	-	-
Operating Weight	-	-	9462 lb	-	-	-
Rated Operating Load at Full Turn - Bucket***	-	-	2502 lb	-	-	-
Straight Tipping Load - Bucket***	-	-	5975 lb	-	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	5004 lb	-	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	5115 lb	-	-	-
Rack Back - Transport Position	-	-	51°	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	3148 lb	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	2361 lb	-	-	-
Note (1)	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-	-
Note (2)	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-	-
Note (3)	-	-	***Manual quick coupler, precleaner hood.	-	-	-
Note (4)	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-	-
Maximum Material Densities - General Purpose
Bucket Type	-	-	General Purpose	-	-	-
Rated Capacity	-	-	0.8 yd³	-	-	-
Dump Height	-	-	90 in	-	-	-
Maximum Material Density	-	-	3169 lb/yd³	-	-	-
Bucket Width	-	-	70 in	-	-	-
Note	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-	-
Maximum Material Densities - Light Material
Bucket Type	-	-	Light Material	-	-	-
Rated Capacity	-	-	1.3 yd³	-	-	-
Dump Height	-	-	85 in	-	-	-
Maximum Material Density	-	-	1989 lb/yd³	-	-	-
Bucket Width	-	-	74 in	-	-	-
Note	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-	-
Hydraulic Cycle Times
Rack Back	-	-	-	4.3 s	-	4.5 s
Raise	-	-	-	8.6 s	-	9 s
Dump	-	-	-	2.9 s	-	3.5 s
Lower	-	-	-	3.7 s	-	5.2 s
Lower Float Down	-	-	-	3.7 s	-	4.3 s
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	13.8 s	-	-
Total Hydraulic Cycle Time	-	-	-	-	-	21.3 s
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	-	-	-	116 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	114 dB(A)	-	-
Note (1)	-	-	-	*Sound suppression equipped	-	-
Note (2)	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-
Note (3)	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-
Note (4)	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	-	1.5 ft
Reach at Maximum Lift	-	-	-	-	-	8 ft
Clearance at Maximum Lift	-	-	-	-	-	10.7 ft
B-Pin Height at Maximum Lift	-	-	-	-	-	15 ft
Maximum Overall Height, Bucket Raised	-	-	-	-	-	20.9 ft
Rear Axle Center Line to Bumper	-	-	-	-	-	10.3 ft
Wheel Base	-	-	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	-	-	35 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	-	12.2 ft
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	-	1.5 ft
B-Pin Height at Maximum Lift	-	-	-	-	-	15 ft
Rear Axle Center Line to Bumper	-	-	-	-	-	10.3 ft
Wheel Base	-	-	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	-	-	35.4 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	-	12.6 ft

Compare Equipment Go Back

988 Wheel Loader

914 Compact Wheel Loader

903D Compact Wheel Loader

990 Wheel Loader

920 Compact Wheel Loader

986 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Hydraulic System

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Hydraulic Cycle Times

Sound Performance - Tier 2

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork