Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio
-
-
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
-
-
Maximum Gross Power
-
110 hp
-
Rated Net Power - Rated Engine Speed
-
2200 r/min
-
Maximum Gross Power - Rated Engine Speed
-
1800 r/min
-
Rated Net Power - SAE J1349
-
99 hp
-
Maximum Gross Power - ISO 14396 (metric)
-
112 hp
-
Rated Net Power - ISO 9249
-
98 hp
-
Maximum Gross Torque - SAE J1995
-
335 ft·lbf
-
Maximum Gross Torque - ISO 14396
-
332 ft·lbf
-
Maximum Net Torque - SAE J1349
-
329 ft·lbf
-
Maximum Net Torque - ISO 9249
-
327 ft·lbf
-
Emissions
-
Engine meets Tier 4 Final/Stage V emission standards.
-
Note
-
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Maximum Gross Power - ISO 14396
-
110 hp
-
Operating Specifications
Operating Weight
112574 lb
-
-
Bucket Capacity Range
4.7-13 m3 (6.2-17 yd3)
-
-
Rated Payload - Quarry Face
12.5 t
-
-
Rated Payload - Loose Material
16 t
-
-
Cat Truck Match - Standard
770 - 772
-
-
Cat Truck Match - High Lift
773 - 775
-
-
Transmission
Transmission Type
Cat planetary powershift
-
-
Forward - 1
4 mile/h
-
-
Forward - 2
7.2 mile/h
-
-
Forward - 3
12.7 mile/h
-
-
Forward - 4
21.6 mile/h
-
-
Reverse - 1
4.7 mile/h
-
-
Reverse - 2
8.3 mile/h
-
-
Reverse - 3
14.4 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
7.8 mile/h
-
-
Direct Drive - Forward 3
13.9 mile/h
-
-
Direct Drive - Forward 4
24.4 mile/h
-
-
Direct Drive - Reverse 1
5 mile/h
-
-
Direct Drive - Reverse 2
8.9 mile/h
-
-
Direct Drive - Reverse 3
15.8 mile/h
-
-
Note
-
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
-
Forward and Reverse - Speed Range 3
-
25 mile/h
-
Forward and Reverse - Speed Range 1*
-
6.3 mile/h
-
Forward and Reverse - Speed Range 2*
-
12.5 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH- Positive Flow Control, Flow Sharing
-
-
Lift/Tilt System - Pump
Variable displacement piston
-
-
Maximum Flow at 1,400-1,860 rpm
153 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4757 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
210 mm × 1050 mm (8.7 in × 41.3 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
266 mm × 685 mm (8.7 in × 27 in)
-
-
Pilot System
Variable displacement piston
-
-
Relief Valve Setting - Main
551 psi
-
-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back
4.5 s
-
-
Raise
8 s
-
-
Dump
2.2 s
-
-
Lower Float Down
3.5 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
18.2 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow at 1,400-1,600 rpm
71.3 gal/min
-
-
Relief Valve Setting - Steering
4351 psi
-
-
Total Steering Angle
86 °
-
-
Steering Cycle Times - High Idle
3.4 s
-
-
Steering Cycle Times - Low Idle
5.6 s
-
-
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
111 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
109 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
112 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Service Refill Capacities
Fuel Tank
188 gal (US)
43.6 gal (US)
-
Cooling System
31.7 gal (US)
5.7 gal (US)
-
Coolant (Validated by Test Cell Fill Quantities)
33 gal (US)
-
-
Crankcase
15.9 gal (US)
-
-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
8.7 gal (US)
-
-
Transmission
24.3 gal (US)
0.8 gal (US)
-
Transmission - Validated by Test Cell Fill Quantities
29 gal (US)
-
-
Differential - Final Drives - Front
49.1 gal (US)
-
-
Differential - Final Drives - Rear
49.1 gal (US)
-
-
Hydraulic System Factory Fill
125.5 gal (US)
-
-
Hydraulic System - Tank Only
63.4 gal (US)
-
-
Note
• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
Axles - Rear Center Differential
-
2 gal (US)
-
Hydraulic System - Including Tank
-
25.9 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
-
4.8 gal (US)
-
Engine Crankcase
-
2.6 gal (US)
-
Hydraulic Tank
-
14.5 gal (US)
-
Axles - Front Center Differential
-
2 gal (US)
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
13.8 ft
-
-
Ground to Top of Exhaust Stacks
14.8 ft
-
-
Ground to Top of Hood
10.9 ft
-
-
Rear Axle - Centerline to Bumper
10.5 ft
-
-
Front Axle Centerline to Bucket Tip
14 ft
-
-
Wheel Base
14.9 ft
-
-
Maximum Overall Length
39.3 ft
-
-
Ground to Lower Hitch Clearance
1.9 ft
-
-
Clearance at Maximum Lift
11.9 ft
-
-
B-Pin Height - Maximum Lift
18 ft
-
-
Maximum Overall Height - Bucket Raised
24.5 ft
-
-
Reach - Maximum Lift
6.5 ft
-
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
13.8 ft
-
-
Ground to Top of Exhaust Stacks
14.8 ft
-
-
Ground to Top of Hood
10.9 ft
-
-
Rear Axle - Centerline to Bumper
10.5 ft
-
-
Front Axle Centerline to Bucket Tip
15.3 ft
-
-
Wheel Base
14.9 ft
-
-
Maximum Overall Length
40.7 ft
-
-
Ground to Lower Hitch Clearance
1.9 ft
-
-
Clearance at Maximum Lift
13.3 ft
-
-
B-Pin Height - Maximum Lift
19.3 ft
-
-
Maximum Overall Height - Bucket Raised
25.8 ft
-
-
Reach - Maximum Lift
6.8 ft
-
-
Weights
Operating Weight
-
19103 lb
-
Buckets
Bucket Capacities
-
1.3-3.5 m3 (1.7-4.6 yd3)
-
Bucket Capacities - General Purpose
-
1.3-1.9 m³ (1.7-2.5 yd³)
-
Bucket Capacities - Light Material
-
2.5-3.5 m³ (3.3-4.6 yd³)
-
Sustainability
Recyclability
-
95%
-
Cab
ROPS
-
ISO 3471:2008
-
FOPS
-
ISO 3449:2005
-
Note (4)
-
*The measurements were conducted with the cab doors and windows closed.
-
Note (2)
-
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
Note (3)
-
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
Note (1)
-
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
Steering
Maximum Flow - Steering Pump
-
22 gpm
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
-
3.75 turns
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
-
2.8 s
-
Maximum Working Pressure - Steering Pump
-
3263 psi
-
Steering Articulation Angle - Each Direction
-
40 °
-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
-
3046 psi
-
Maximum Flow - Implement Pump
-
39 gpm
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
-
24 gpm
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
-
3046 psi
-
Hydraulic Cycle Time - Total Cycle Time
-
12.5 s
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
-
5.2 s
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
-
24 gpm
-
Hydraulic Cycle Time - Dump, at Maximum Reach
-
1.4 s
-
Relief Pressure - Tilt Cylinder
-
4931 psi
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
-
32 gpm
-
Maximum Working Pressure - Implement Pump
-
4061 psi
-
Hydraulic Cycle Time - Rackback
-
2.2 s
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
