Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	910 Compact Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	-
Engine Model	Cat® C18	Cat C3.6	Cat® 3516E	Cat C3.6
Rated Speed	1700/rpm	-	-	-
Peak Power Speed	1500/rpm	-	-	-
Gross Power - SAE J1995:2014	588 hp	-	1870 hp	-
Net Power - SAE J1349:2011	538 hp	-	-	-
Bore	5.7 in	3.85 in	6.7 in	3.85 in
Stroke	7.2 in	4.72 in	8.5 in	4.72 in
Displacement	1105 in³	220 in³	4766 in³	220 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	-	-
Torque Rise	58 %	-	39%	-
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	The power ratings apply when tested under the reference conditions for the specified standard.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-
Maximum Gross Power	-	110 hp	-	121 hp
Rated Net Power - Rated Engine Speed	-	2200 r/min	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	1800 r/min	-	2200 r/min
Rated Net Power - SAE J1349	-	99 hp	-	120 hp
Maximum Gross Power - ISO 14396 (metric)	-	112 hp	-	122 hp
Rated Net Power - ISO 9249	-	98 hp	-	118 hp
Maximum Gross Torque - SAE J1995	-	335 ft·lbf	-	372 ft·lbf
Maximum Gross Torque - ISO 14396	-	332 ft·lbf	-	369 ft·lbf
Maximum Net Torque - SAE J1349	-	329 ft·lbf	-	366 ft·lbf
Maximum Net Torque - ISO 9249	-	327 ft·lbf	-	363 ft·lbf
Emissions	-	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.
Note	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396	-	110 hp	-	121 hp
Engine Power - ISO 14396	-	-	1847 hp	-
Net Power - SAE J1349 - Standard Ambient	-	-	1739 hp	-
Net Power - SAE J1349 - High Ambient	-	-	1696 hp	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	8549 lb/ft	-
Note (3)	-	-	The gross power advertised is with the fan at maximum speed.	-
Operating Specifications
Operating Weight	112574 lb	-	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	17.2-43.6 m3 (22.3-57 yd3)	-
Rated Payload - Quarry Face	12.5 t	-	-	-
Rated Payload - Loose Material	16 t	-	-	-
Cat Truck Match - Standard	770 - 772	-	785/789	-
Cat Truck Match - High Lift	773 - 775	-	789/793/794	-
Operating Weight - Standard	-	-	543772 lb	-
Operating Weight - High Lift	-	-	547675 lb	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Note	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Transmission
Transmission Type	Cat planetary powershift	-	Cat Planetary Power Shift	-
Forward - 1	4 mile/h	-	4.6 mile/h	-
Forward - 2	7.2 mile/h	-	8 mile/h	-
Forward - 3	12.7 mile/h	-	13.6 mile/h	-
Forward - 4	21.6 mile/h	-	-	-
Reverse - 1	4.7 mile/h	-	5 mile/h	-
Reverse - 2	8.3 mile/h	-	8.8 mile/h	-
Reverse - 3	14.4 mile/h	-	14.9 mile/h	-
Direct Drive - Forward 1	Lock-up disabled	-	Lock-up disables	-
Direct Drive - Forward 2	7.8 mile/h	-	8.7 mile/h	-
Direct Drive - Forward 3	13.9 mile/h	-	15.2 mile/h	-
Direct Drive - Forward 4	24.4 mile/h	-	-	-
Direct Drive - Reverse 1	5 mile/h	-	Lock-up disables	-
Direct Drive - Reverse 2	8.9 mile/h	-	9.6 mile/h	-
Direct Drive - Reverse 3	15.8 mile/h	-	16.8 mile/h	-
Note	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3	-	25 mile/h	-	25 mile/h
Forward and Reverse - Speed Range 2*	-	12.5 mile/h	-	12.5 mile/h
Forward and Reverse - Speed Range 1*	-	6.3 mile/h	-	6.3 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	Positive Flow Control	-
Lift/Tilt System - Pump	Variable displacement piston	-	Variable Displacement Piston	-
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	5004 psi	-
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	370 × 1713 mm (14.6 × 67.4 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	310 × 1086 mm (12.2 × 42.8 in)	-
Pilot System	Variable displacement piston	-	Open Loop and Pressure Reducing	-
Relief Valve Setting - Main	551 psi	-	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	-	541 gpm	-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-
Raise	8 s	-	-	-
Dump	2.2 s	-	-	-
Lower Float Down	3.5 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Pilot, Load Sensing	-
Steering System - Pump	Piston, variable displacement	-	Piston, Variable Displacement	-
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-
Relief Valve Setting - Steering	4351 psi	-	-	-
Total Steering Angle	86 °	-	80 degrees	-
Steering Cycle Times - High Idle	3.4 s	-	4.3 s	-
Steering Cycle Times - Low Idle	5.6 s	-	7.6 s	-
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-	-
Axles
Front	Fixed	Fixed; Locking differential (standard)	Fixed	Fixed; Locking differential (standard)
Rear	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion	Oscillating ±11 degrees; Locking differential (standard)
Oscillation Angle	13 °	-	9°	-
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	-
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Service Refill Capacities
Fuel Tank	188 gal (US)	43.6 gal (US)	-	43.6 gal (US)
Cooling System	31.7 gal (US)	5.7 gal (US)	-	5.7 gal (US)
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-
Crankcase	15.9 gal (US)	-	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-
Transmission	24.3 gal (US)	0.8 gal (US)	-	0.8 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	-	-	-
Differential - Final Drives - Rear	49.1 gal (US)	-	-	-
Hydraulic System Factory Fill	125.5 gal (US)	-	-	-
Hydraulic System - Tank Only	63.4 gal (US)	-	-	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Diesel Exhaust Fluid (DEF) Tank	-	4.8 gal (US)	-	4.8 gal (US)
Hydraulic System - Including Tank	-	25.9 gal (US)	-	25.9 gal (US)
Engine Crankcase	-	2.6 gal (US)	-	2.6 gal (US)
Hydraulic Tank	-	14.5 gal (US)	-	14.5 gal (US)
Axles - Front Center Differential	-	2 gal (US)	-	-
Axles - Rear Center Differential	-	2 gal (US)	-	-
Axles - Rear	-	-	-	4.5 gal (US)
Axles - Front	-	-	-	4.5 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-
Wheel Base	14.9 ft	-	-	-
Maximum Overall Length	39.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-
Wheel Base	14.9 ft	-	-	-
Maximum Overall Length	40.7 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-
Weights
Operating Weight	-	18102 lb	-	21742 lb
Buckets
Bucket Capacities	-	1.3-3.5 m3 (1.7-4.6 yd3)	-	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	1.3-1.9 m³ (1.7-2.5 yd³)	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	2.5-3.5 m³ (3.3-4.6 yd³)	-	2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
Recyclability	-	95%	-	95%
Cab
ROPS	-	ISO 3471:2008	-	ISO 3471:2008
FOPS	-	ISO 3449:2005	-	ISO 3449:2005
Note (2)	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)	-	*The measurements were conducted with the cab doors and windows closed.	-	*The measurements were conducted with the cab doors and windows closed.
Steering
Maximum Working Pressure - Steering Pump	-	2683 psi	-	3190 psi
Steering Articulation Angle - Each Direction	-	40 °	-	40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	3.2 s	-	2.3 s
Maximum Flow - Steering Pump	-	17 gpm	-	21.7 gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	3.75 turns	-	3.4 turns
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach	-	1.4 s	-	1.8 s
Hydraulic Cycle Time - Total Cycle Time	-	12.5 s	-	11.5 s
Maximum Working Pressure - Implement Pump	-	3408 psi	-	4061 psi
Relief Pressure - Tilt Cylinder	-	4931 psi	-	4641 psi
Hydraulic Cycle Time - Rackback	-	2.2 s	-	2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	3046 psi	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	5.2 s	-	4.8 s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	3046 psi	-	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	24 gpm	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	-	24 gpm	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	3.7 s	-	2.7 s
Maximum Flow - Implement Pump	-	32 gpm	-	43.6 gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	25 gpm
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	4641 psi
Note	-	-	-	All cycle times listed are with cylinder snubbing turned off.
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	40 gpm
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	25 gpm
Tires
Note (2)	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size	-	15.5 R25 L2 XTLA	-	17.5 R25 L2 XTLA
Other Choices Include	-	17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Note (3)	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)	-	Other tire choices are available. Contact your Cat dealer for details.	-	Other tire choices are available. Contact your Cat dealer for details.
Complete System Fill
Fuel Tank - Standard	-	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	-	1414 gal (US)	-
Cooling System	-	-	138 gal (US)	-
Engine Crankcase	-	-	76 gal (US)	-
Transmission	-	-	110 gal (US)	-
Differential - Final Drives - Front	-	-	220 gal (US)	-
Differential - Final Drives - Rear	-	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	-	20 gal (US)	-
Note	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	127.4 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	119 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	117 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	28.8 ft	-
Clearance at Maximum Lift	-	-	19.8 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	21.9 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	39.3 ft	-
Maximum Overall Length	-	-	64.6 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.5 degrees	-
Rack Back Angle - Carry	-	-	47.7 degrees	-
Rack Back Angle - Ground Level	-	-	39.7 degrees	-
Reach - Maximum Lift	-	-	9.6 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	31.6 ft	-
Clearance at Maximum Lift	-	-	22.6 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	24.2 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	42.1 ft	-
Maximum Overall Length	-	-	66.9 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.4 degrees	-
Rack Back Angle - Carry	-	-	53.5 degrees	-
Rack Back Angle - Ground Level	-	-	45 degrees	-
Reach - Maximum Lift	-	-	9.4 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Hydraulic Cycle Times
Rack Back	-	-	4.9 s	-
Raise	-	-	12.6 s	-
Dump	-	-	3.1 s	-
Lower Float Down	-	-	4.2 s	-

Compare Equipment Go Back

988 Wheel Loader

910 Compact Wheel Loader

995 Wheel Loader

920 Compact Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Hydraulic Cycle Times

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us