CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    986 Wheel Loader
    View Product
    920 Compact Wheel Loader
    View Product Remove
    910 Compact Wheel Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 449 hp - -
    Engine Model Cat® C15 Cat C3.6 Cat C3.6
    Peak Power Speed 1600 - -
    Gross Power - SAE J1995:2014 456 hp - -
    Net Power - SAE J1349:2011 373 hp - -
    Rated Speed 2000 - -
    Rated Speed - 2,000 rpm - EEC 80/1269 373 hp - -
    Rated Speed - 2,000 rpm - ISO 9249 373 hp - -
    Bore 5.4 in 3.85 in 3.85 in
    Stroke 6.75 in 4.72 in 4.72 in
    Displacement 927 in² 220 in³ 220 in³
    Peak Torque (1,200 rpm) - SAE J1995:2014 1778 lb/ft - -
    Torque Rise 16% - -
    Note (1) Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. - -
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. - -
    Maximum Gross Power - 121 hp 110 hp
    Rated Net Power - Rated Engine Speed - 2200 r/min 2200 r/min
    Maximum Gross Power - Rated Engine Speed - 2200 r/min 1800 r/min
    Rated Net Power - SAE J1349 - 120 hp 99 hp
    Maximum Gross Power - ISO 14396 (metric) - 122 hp 112 hp
    Rated Net Power - ISO 9249 - 118 hp 98 hp
    Maximum Gross Torque - SAE J1995 - 372 ft·lbf 335 ft·lbf
    Maximum Gross Torque - ISO 14396 - 369 ft·lbf 332 ft·lbf
    Maximum Net Torque - SAE J1349 - 366 ft·lbf 329 ft·lbf
    Maximum Net Torque - ISO 9249 - 363 ft·lbf 327 ft·lbf
    Emissions - Engine meets Tier 4 Final/Stage V emission standards. Engine meets Tier 4 Final/Stage V emission standards.
    Note - Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Gross Power - ISO 14396 - 121 hp 110 hp

    Operating Specifications
    Operating Weight - Standard 97785 lb - -
    Bucket Capacity Range 5.0-10.3 m³ (6.5-13.5 yd³) - -
    Operating Weight - High Lift 104005 lb - -
    Rated Payload - Standard (Quarry Face) 11 ton (US) - -
    Rated Payload - Loose Material (Standard) 14 ton (US) - -
    Rated Payload - High Lift (Quarry Face) 11 ton (US) - -
    Rated Payload - Loose Material (High Lift) 12.1 ton (US) - -
    Cat Truck Match - Standard 770/735/740/745 - -
    Cat Truck Match - High Lift 772/773 - -

    Transmission
    Transmission Type Cat planetary power shift - -
    Forward - 1 5 mile/h - -
    Forward - 2 8 mile/h - -
    Direct Drive - Forward 2 8 mile/h - -
    Direct Drive - Forward 3 14 mile/h - -
    Direct Drive - Forward 4 24 mile/h - -
    Reverse - 1 5 mile/h - -
    Reverse - 2 8 mile/h - -
    Direct Drive - Reverse 2 9 mile/h - -
    Direct Drive - Reverse 3 16 mile/h - -
    Direct Drive - Reverse 4 25.4 mile/h - -
    Note - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
    Forward and Reverse - Speed Range 3 - 25 mile/h 25 mile/h
    Forward and Reverse - Speed Range 2* - 12.5 mile/h 12.5 mile/h
    Forward and Reverse - Speed Range 1* - 6.3 mile/h 6.3 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Load Sense - -
    Lift/Tilt System - Pump 2 × 110 cc variable displacement - -
    Maximum Flow at 2,165 rpm 123 gpm - -
    Relief Valve Setting - Lift/Tilt 4050 psi - -
    Lift Cylinder - Bore 7.5 in - -
    Lift Cylinder - Stroke 45 in - -
    Tilt Cylinder - Bore 6.7 in - -
    Tilt Cylinder - Stroke 28.4 in - -

    Hydraulic Cycle Times
    Rack Back 4.5 s - -
    Raise 9 s - -
    Dump 3.5 s - -
    Lower 5.2 s - -
    Lower Float Down 4.3 s - -
    Total Hydraulic Cycle Time 21.3 s - -

    Hydraulic System - Steering
    Steering System - Circuit Load Sense - -
    Steering System - Pump Piston, variable displacement - -
    Maximum Flow at 1,400 rpm 52 gpm - -
    Steering Cut Off Pressure 4000 psi - -
    Total Steering Angle 70° - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co - -

    Axles
    Front Fixed Fixed; Locking differential (standard) Fixed; Locking differential (standard)
    Rear Trunnion Oscillating ±11 degrees; Locking differential (standard) Oscillating ±11 degrees; Locking differential (Standard)
    Oscillation Angle ±12.5° - -
    Oscillation Angle - Chain Arrangement ±8.5° - -

    Brakes
    Brakes ISO 3450:2011 - -

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) - -

    Service Refill Capacities
    Fuel Tank 141 gal (US) 43.6 gal (US) 43.6 gal (US)
    Fuel Tank - Short Lift 127 gal (US) - -
    Cooling Systems 26 gal (US) - -
    Crankcase 9 gal (US) - -
    Diesel Exhaust Fluid Tank 6 gal (US) - -
    Transmission 20 gal (US) 0.8 gal (US) 0.8 gal (US)
    Axle Oil - Differentials and Final Drives - Front 49 gal (US) - -
    Axle Oil - Differentials and Final Drives - Rear 45 gal (US) - -
    Hydraulic System Factory Fill 87 gal (US) - -
    Hydraulic System - Tank Only 34 gal (US) - -
    Engine Crankcase - 2.6 gal (US) 2.6 gal (US)
    Axles - Rear - 4.5 gal (US) -
    Hydraulic System - Including Tank - 25.9 gal (US) 25.9 gal (US)
    Cooling System - 5.7 gal (US) 5.7 gal (US)
    Hydraulic Tank - 14.5 gal (US) 14.5 gal (US)
    Note - DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Diesel Exhaust Fluid (DEF) Tank - 4.8 gal (US) 4.8 gal (US)
    Axles - Front - 4.5 gal (US) -
    Axles - Front Center Differential - - 2 gal (US)
    Axles - Rear Center Differential - - 2 gal (US)

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 74 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* 73 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Front Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    Reach - Maximum Lift 7.1 ft - -
    Clearance at Maximum Lift 10.1 ft - -
    B-Pin Height - Maximum Lift 16.1 ft - -
    Maximum Overall Height - Bucket Raised 22.4 ft - -
    Rear Axle - Centerline to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 36.6 ft - -
    Front Axle Centerline to Bucket Tip 13.8 ft - -
    Note
    • All dimensions are approximate.
    • Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 - -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Front Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    Reach - Maximum Lift 7.4 ft - -
    Clearance at Maximum Lift 11.6 ft - -
    B-Pin Height - Maximum Lift 17.6 ft - -
    Maximum Overall Height - Bucket Raised 23.9 ft - -
    Rear Axle - Centerline to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 38 ft - -
    Front Axle Centerline to Bucket Tip 15.3 ft - -
    Note
    • All dimensions are approximate.
    • Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 - -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Rear Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    Reach at Maximum Lift 8 ft - -
    Clearance at Maximum Lift 10.7 ft - -
    B-Pin Height at Maximum Lift 15 ft - -
    Maximum Overall Height, Bucket Raised 20.9 ft - -
    Rear Axle Center Line to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 35 ft - -
    Front Axle Centerline to Bucket Tip 12.2 ft - -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS 13.5 ft - -
    Ground to Top of Exhaust Stacks 13.3 ft - -
    Ground to Top of Hood 10.7 ft - -
    Ground to Center of Rear Axle 3.2 ft - -
    Ground to Fuel Tank Clearance 2.3 ft - -
    Ground to Lower Hitch Clearance 1.5 ft - -
    B-Pin Height at Maximum Lift 15 ft - -
    Rear Axle Center Line to Bumper 10.3 ft - -
    Wheel Base 12.5 ft - -
    Maximum Overall Length 35.4 ft - -
    Front Axle Centerline to Bucket Tip 12.6 ft - -

    Weights
    Operating Weight - 21742 lb 18102 lb

    Buckets
    Bucket Capacities - 1.3-3.5 m3 (1.7-4.6 yd3) 1.3-3.5 m3 (1.7-4.6 yd3)
    Bucket Capacities - General Purpose - 1.3-1.9 m³ (1.7-2.5 yd³) 1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material - 2.5-3.5 m³ (3.3-4.6 yd³) 2.5-3.5 m³ (3.3-4.6 yd³)

    Sustainability
    Recyclability - 95% 95%

    Cab
    ROPS - ISO 3471:2008 ISO 3471:2008
    FOPS - ISO 3449:2005 ISO 3449:2005
    Note (3) - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (2) - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (1) - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (4) - *The measurements were conducted with the cab doors and windows closed. *The measurements were conducted with the cab doors and windows closed.

    Loader Hydraulic System
    Maximum Flow - Implement Pump - 43.6 gpm 32 gpm
    Relief Pressure - Tilt Cylinder - 4641 psi 4931 psi
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard - 25 gpm -
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure - 4641 psi -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level - 2.7 s 3.7 s
    Note - All cycle times listed are with cylinder snubbing turned off. -
    Maximum Working Pressure - Implement Pump - 4061 psi 3408 psi
    Hydraulic Cycle Time - Total Cycle Time - 11.5 s 12.5 s
    Hydraulic Cycle Time - Rackback - 2.2 s 2.2 s
    Hydraulic Cycle Time - Dump, at Maximum Reach - 1.8 s 1.4 s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift - 4.8 s 5.2 s
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High - 40 gpm -
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow - 25 gpm -
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure - - 3046 psi
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure - - 3046 psi
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow - - 24 gpm
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow - - 24 gpm

    Steering
    Maximum Working Pressure - Steering Pump - 3190 psi 2683 psi
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed - 2.3 s 3.2 s
    Steering Articulation Angle - Each Direction - 40 ° 40 °
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - 3.4 turns 3.75 turns
    Maximum Flow - Steering Pump - 21.7 gpm 17 gpm

    Tires
    Other Choices Include - 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
    Standard Size - 17.5 R25 L2 XTLA 15.5 R25 L2 XTLA
    Note (1) - Other tire choices are available. Contact your Cat dealer for details. Other tire choices are available. Contact your Cat dealer for details.
    Note (3) - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2) - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Add a Similar Product:
    • 995 Wheel Loader Add
    • 992 Wheel Loader Add
    • 988 GC Wheel Loader Add
    • 990 Wheel Loader Add
    • 988 XE Wheel Loader Add
    • 988 Wheel Loader Add
    • 950 GC Wheel Loader | Front Loader Add
    • 914 Compact Wheel Loader Add
    • 903D Compact Wheel Loader Add