Compare

Compare Equipment Go Back

Engine
	986 Wheel Loader View Product	995 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	449 hp	-	-
Engine Model	Cat® C15	Cat® 3516E	Cat C3.6
Peak Power Speed	1600	-	-
Gross Power - SAE J1995:2014	456 hp	1870 hp	-
Net Power - SAE J1349:2011	373 hp	-	-
Rated Speed	2000	-	-
Rated Speed - 2,000 rpm - EEC 80/1269	373 hp	-	-
Rated Speed - 2,000 rpm - ISO 9249	373 hp	-	-
Bore	5.4 in	6.7 in	3.85 in
Stroke	6.75 in	8.5 in	4.72 in
Displacement	927 in²	4766 in³	220 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lb/ft	-	-
Torque Rise	16%	39%	-
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	The power ratings apply when tested under the reference conditions for the specified standard.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.
Engine Power - ISO 14396	-	1847 hp	-
Net Power - SAE J1349 - Standard Ambient	-	1739 hp	-
Net Power - SAE J1349 - High Ambient	-	1696 hp	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-
Note (3)	-	The gross power advertised is with the fan at maximum speed.	-
Maximum Gross Power	-	-	121 hp
Rated Net Power - Rated Engine Speed	-	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	-	2200 r/min
Rated Net Power - SAE J1349	-	-	120 hp
Maximum Gross Power - ISO 14396 (metric)	-	-	122 hp
Rated Net Power - ISO 9249	-	-	118 hp
Maximum Gross Torque - SAE J1995	-	-	372 ft·lbf
Maximum Gross Torque - ISO 14396	-	-	369 ft·lbf
Maximum Net Torque - SAE J1349	-	-	366 ft·lbf
Maximum Net Torque - ISO 9249	-	-	363 ft·lbf
Note	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396	-	-	121 hp
Operating Specifications
Operating Weight - Standard	97785 lb	543772 lb	-
Bucket Capacity Range	5.0-10.3 m³ (6.5-13.5 yd³)	17.2-43.6 m3 (22.3-57 yd3)	-
Operating Weight - High Lift	104005 lb	547675 lb	-
Rated Payload - Standard (Quarry Face)	11 ton (US)	-	-
Rated Payload - Loose Material (Standard)	14 ton (US)	-	-
Rated Payload - High Lift (Quarry Face)	11 ton (US)	-	-
Rated Payload - Loose Material (High Lift)	12.1 ton (US)	-	-
Cat Truck Match - Standard	770/735/740/745	785/789	-
Cat Truck Match - High Lift	772/773	789/793/794	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Power Shift	-
Forward - 1	5 mile/h	4.6 mile/h	-
Forward - 2	8 mile/h	8 mile/h	-
Direct Drive - Forward 2	8 mile/h	8.7 mile/h	-
Direct Drive - Forward 3	14 mile/h	15.2 mile/h	-
Direct Drive - Forward 4	24 mile/h	-	-
Reverse - 1	5 mile/h	5 mile/h	-
Reverse - 2	8 mile/h	8.8 mile/h	-
Direct Drive - Reverse 2	9 mile/h	9.6 mile/h	-
Direct Drive - Reverse 3	16 mile/h	16.8 mile/h	-
Direct Drive - Reverse 4	25.4 mile/h	-	-
Forward - 3	-	13.6 mile/h	-
Reverse - 3	-	14.9 mile/h	-
Direct Drive - Forward 1	-	Lock-up disables	-
Direct Drive - Reverse 1	-	Lock-up disables	-
Note	-	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3	-	-	25 mile/h
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Load Sense	Positive Flow Control	-
Lift/Tilt System - Pump	2 × 110 cc variable displacement	Variable Displacement Piston	-
Maximum Flow at 2,165 rpm	123 gpm	-	-
Relief Valve Setting - Lift/Tilt	4050 psi	5004 psi	-
Lift Cylinder - Bore	7.5 in	-	-
Lift Cylinder - Stroke	45 in	-	-
Tilt Cylinder - Bore	6.7 in	-	-
Tilt Cylinder - Stroke	28.4 in	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	541 gpm	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	370 × 1713 mm (14.6 × 67.4 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	310 × 1086 mm (12.2 × 42.8 in)	-
Pilot System	-	Open Loop and Pressure Reducing	-
Hydraulic Cycle Times
Rack Back	4.5 s	4.9 s	-
Raise	9 s	12.6 s	-
Dump	3.5 s	3.1 s	-
Lower	5.2 s	-	-
Lower Float Down	4.3 s	4.2 s	-
Total Hydraulic Cycle Time	21.3 s	-	-
Hydraulic System - Steering
Steering System - Circuit	Load Sense	Pilot, Load Sensing	-
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	-
Maximum Flow at 1,400 rpm	52 gpm	-	-
Steering Cut Off Pressure	4000 psi	-	-
Total Steering Angle	70°	80 degrees	-
Steering Cycle Times - Low Idle	-	7.6 s	-
Steering Cycle Times - High Idle	-	4.3 s	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	-
Axles
Front	Fixed	Fixed	Fixed; Locking differential (standard)
Rear	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)
Oscillation Angle	±12.5°	9°	-
Oscillation Angle - Chain Arrangement	±8.5°	-	-
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	-
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-	-
Service Refill Capacities
Fuel Tank	141 gal (US)	-	43.6 gal (US)
Fuel Tank - Short Lift	127 gal (US)	-	-
Cooling Systems	26 gal (US)	-	-
Crankcase	9 gal (US)	-	-
Diesel Exhaust Fluid Tank	6 gal (US)	-	-
Transmission	20 gal (US)	-	0.8 gal (US)
Axle Oil - Differentials and Final Drives - Front	49 gal (US)	-	-
Axle Oil - Differentials and Final Drives - Rear	45 gal (US)	-	-
Hydraulic System Factory Fill	87 gal (US)	-	-
Hydraulic System - Tank Only	34 gal (US)	-	-
Engine Crankcase	-	-	2.6 gal (US)
Axles - Rear	-	-	4.5 gal (US)
Hydraulic System - Including Tank	-	-	25.9 gal (US)
Cooling System	-	-	5.7 gal (US)
Hydraulic Tank	-	-	14.5 gal (US)
Note	-	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)
Axles - Front	-	-	4.5 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.5 ft	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-
Ground to Top of Hood	10.7 ft	-	-
Ground to Center of Front Axle	3.2 ft	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-
Reach - Maximum Lift	7.1 ft	-	-
Clearance at Maximum Lift	10.1 ft	-	-
B-Pin Height - Maximum Lift	16.1 ft	-	-
Maximum Overall Height - Bucket Raised	22.4 ft	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-
Wheel Base	12.5 ft	-	-
Maximum Overall Length	36.6 ft	-	-
Front Axle Centerline to Bucket Tip	13.8 ft	-	-
Note	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.5 ft	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-
Ground to Top of Hood	10.7 ft	-	-
Ground to Center of Front Axle	3.2 ft	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-
Reach - Maximum Lift	7.4 ft	-	-
Clearance at Maximum Lift	11.6 ft	-	-
B-Pin Height - Maximum Lift	17.6 ft	-	-
Maximum Overall Height - Bucket Raised	23.9 ft	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-
Wheel Base	12.5 ft	-	-
Maximum Overall Length	38 ft	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-
Note	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	13.5 ft	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-
Ground to Top of Hood	10.7 ft	-	-
Ground to Center of Rear Axle	3.2 ft	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-
Reach at Maximum Lift	8 ft	-	-
Clearance at Maximum Lift	10.7 ft	-	-
B-Pin Height at Maximum Lift	15 ft	-	-
Maximum Overall Height, Bucket Raised	20.9 ft	-	-
Rear Axle Center Line to Bumper	10.3 ft	-	-
Wheel Base	12.5 ft	-	-
Maximum Overall Length	35 ft	-	-
Front Axle Centerline to Bucket Tip	12.2 ft	-	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	13.5 ft	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-
Ground to Top of Hood	10.7 ft	-	-
Ground to Center of Rear Axle	3.2 ft	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-
B-Pin Height at Maximum Lift	15 ft	-	-
Rear Axle Center Line to Bumper	10.3 ft	-	-
Wheel Base	12.5 ft	-	-
Maximum Overall Length	35.4 ft	-	-
Front Axle Centerline to Bucket Tip	12.6 ft	-	-
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-
Cooling System	-	138 gal (US)	-
Engine Crankcase	-	76 gal (US)	-
Transmission	-	110 gal (US)	-
Differential - Final Drives - Front	-	220 gal (US)	-
Differential - Final Drives - Rear	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	20 gal (US)	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	-
Clearance at Maximum Lift	-	19.8 ft	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	21.9 ft	-
Ground to Bumper Clearance	-	4.4 ft	-
Ground to Center of Axles	-	6 ft	-
Ground to Lower Hitch Clearance	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-
Ground to Top of Hood	-	18.6 ft	-
Ground to Top of ROPS	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	39.3 ft	-
Maximum Overall Length	-	64.6 ft	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	59.5 degrees	-
Rack Back Angle - Carry	-	47.7 degrees	-
Rack Back Angle - Ground Level	-	39.7 degrees	-
Reach - Maximum Lift	-	9.6 ft	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-
Tread Width	-	14.1 ft	-
Wheel Base	-	22.3 ft	-
Width - Over Tires - With Bulge	-	18.8 ft	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	-
Clearance at Maximum Lift	-	22.6 ft	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	24.2 ft	-
Ground to Bumper Clearance	-	4.4 ft	-
Ground to Center of Axles	-	6 ft	-
Ground to Lower Hitch Clearance	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-
Ground to Top of Hood	-	18.6 ft	-
Ground to Top of ROPS	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	42.1 ft	-
Maximum Overall Length	-	66.9 ft	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	59.4 degrees	-
Rack Back Angle - Carry	-	53.5 degrees	-
Rack Back Angle - Ground Level	-	45 degrees	-
Reach - Maximum Lift	-	9.4 ft	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-
Tread Width	-	14.1 ft	-
Wheel Base	-	22.3 ft	-
Width - Over Tires - With Bulge	-	18.8 ft	-
Weights
Operating Weight	-	-	21742 lb
Buckets
Bucket Capacities	-	-	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
Recyclability	-	-	95%
Cab
ROPS	-	-	ISO 3471:2008
FOPS	-	-	ISO 3449:2005
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	43.6 gpm
Relief Pressure - Tilt Cylinder	-	-	4641 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	25 gpm
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	4641 psi
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	2.7 s
Note	-	-	All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure - Implement Pump	-	-	4061 psi
Hydraulic Cycle Time - Total Cycle Time	-	-	11.5 s
Hydraulic Cycle Time - Rackback	-	-	2.2 s
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.8 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	4.8 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	40 gpm
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	25 gpm
Steering
Maximum Working Pressure - Steering Pump	-	-	3190 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	2.3 s
Steering Articulation Angle - Each Direction	-	-	40 °
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.4 turns
Maximum Flow - Steering Pump	-	-	21.7 gpm
Tires
Other Choices Include	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size	-	-	17.5 R25 L2 XTLA
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Compare Equipment Go Back

986 Wheel Loader

995 Wheel Loader

920 Compact Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Buckets

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us