Compare

Compare Equipment Go Back

Operating Specifications
	770 Off-Highway Truck View Product	MH3022 Wheel Material Handler View Product Remove	772 (07) Off-Highway Truck View Product Remove	789 Next Generation View Product Remove	794 AC Mining Truck View Product Remove	793F Mining Truck View Product Remove
Nominal Payload Class (100%)	42.1 ton (US)	-	51.6 ton (US)	-	-	-
Top Speed - Loaded	45.8 mile/h	-	49.2 mile/h	-	-	-
Target Payload (100%)	42.1 ton (US)	-	-	-	-	-
Maximum Working Payload (110%)	46.3 ton (US)	-	-	-	-	-
Maximum Allowable Payload (120%)*	50.5 ton (US)	-	-	-	-	-
Body Capacity - SAE 2:1	32.9 yd³	-	40.8 yd³	-	-	-
Note (1)	*Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.	-	-	-	-	-
Note (2)	Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.	-	-	-	-	-
Maximum Payload Class (110%)	-	-	56.7 ton (US)	-	-	-
Target Payload Capacity	-	-	51.6 ton (US)	-	-	-
Not to Exceed Payload (120%)	-	-	61.9 ton (US)	-	-	-
Body Capacity (SAE 2:1)**	-	-	40.8 yd³	-	-	-
Engine
Engine Model	Cat® C15	Cat C4.4	Cat® C18	Cat® 3516E	Cat® C175-16	Cat® C175-16
Rated Engine Speed	1700 r/min	-	1700 r/min	-	-	-
Gross Power - SAE J1995:2014	515 hp	-	605 hp	2100 hp	-	-
Net Power - SAE J1349:2011	477 hp	-	550 hp	1975 hp	-	-
Net Power - ISO 9249	477 hp	145 hp	550 hp	-	-	-
Net Power - 80/1269/EEC	489 hp	-	-	-	-	-
Net Power - ISO 14396	508 hp	-	-	-	-	-
Net Torque - SAE J1349	1834 ft·lbf	-	2221 ft-lb	-	-	-
Number of Cylinders	6	-	6	-	-	-
Bore	5.4 in	4.1 in	5.7 in	6.7 in	6.9 in	6.9 in
Stroke	6.7 in	5 in	7.2 in	8.5 in	8.7 in	8.7 in
Displacement	927.6 in³	268.5 in³	1105 in³	4766 in³	5187 in³	5187 in³
Note (1)	Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time	-	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.	Contact factory for high altitude configuration.	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)	Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO	-	Optional 1417 kW / 1,900 HP engine rating.	Tier 4 / EU Stage V option available for regions that require these emissions standards.	EPA Tier 4 Final / EU Stage V available for applicable markets.
Note (3)	No engine derating required up to 3000 m (9,843 ft) altitude.	-	-	U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.	Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW)	-
Note (4)	Meets Japan Small Volume Exemption.	-	-	-	-	-
Emissions	Meets U.S. EPA Tier 4 and EU Stage V emission standards.	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.	-	-	-	Fuel Optimized
Net Power - ISO 9249 (DIN)	-	147 hp (metric)	-	-	-	-
Engine Power - Maximum - ISO 14396	-	148 hp	-	-	-	-
Engine Power - ISO 14396 (DIN)	-	150 hp (metric)	-	-	-	-
Biodiesel Capability	-	Up to B20¹	-	-	-	-
Engine Power - ISO 14396	-	-	598 hp	-	-	-
Rated Speed	-	-	-	1650 r/min	1800 r/min	1750 r/min
Emissions Rating	-	-	-	Fuel Optimized	Fuel Optimized	-
Gross Power - SAE J1995	-	-	-	-	3500 hp	2650 hp
Standard Gross Power - SAE J1995	-	-	-	-	3500 hp	-
Optional Gross Power - SAE J1995	-	-	-	-	3100 hp	-
Optional Gross Power - SAE J1995 (Option 2)	-	-	-	-	2750 hp	-
Net Power - SAE J1349	-	-	-	-	3405 hp	2478 hp
Weights - Approximate
Target Gross Machine Operating Weight	157000 lb	-	181000 lb	-	-	-
Target Gross Machine Weight	157000 lb	-	181000 lb	-	-	-
Chassis Weight	55948 lb	-	59223 lb	-	426237 lb	265639 lb
Body Weight	17306 lb	-	17306 lb	60406 lb	64346 lb	67682 lb
Note (1)	Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.	-	-	Consult your tire manufacturer for maximum tire load	Consult your tire manufacturer for maximum tire load.	Consult your tire manufacturer for maximum tire load
Note (2)	Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.	-	-	Chassis weight with full fuel and fluids, standard and mandatory attachments, hoist, body mounting group, rims, and tires.	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Nominal Rated Payload	-	-	-	213 ton (US)	327 ton (US)	256 ton (US)
Rated Gross Machine Weight	-	-	-	715000 lb	1150000 lb	851000 lb
Note (3)	-	-	-	-	Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations.	Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
Note (4)	-	-	-	-	Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg)	-
Transmission
Forward - 1	7.4 mile/h	-	8 mile/h	7.8 mile/h	-	8 mile/h
Forward - 2	10.1 mile/h	-	10.9 mile/h	10.6 mile/h	-	10.8 mile/h
Forward - 3	13.8 mile/h	-	14.8 mile/h	14.4 mile/h	-	14.8 mile/h
Forward - 4	18.5 mile/h	-	19.8 mile/h	19.4 mile/h	-	19.9 mile/h
Forward - 5	25.1 mile/h	-	26.9 mile/h	26.3 mile/h	-	27.1 mile/h
Forward - 6	33.8 mile/h	-	36.2 mile/h	35.5 mile/h	-	37.3 mile/h
Forward - 7	45.8 mile/h	-	49.2 mile/h	-	-	-
Reverse	8.8 mile/h	-	10.4 mile/h	7.3 mile/h	-	7.3 mile/h
Note	Maximum travel speeds with standard 18.00R33 (E4) tires.	-	-	-	-	-
Maximum Gradeability	-	65	-	-	-	-
Maximum Travel Speed (with steering wheel)	-	12.4 mile/h	-	-	-	-
Maximum Travel Speed (with joysticks)	-	9.3 mile/h	-	-	-	-
Drawbar Pull	-	28551 lb/ft	-	-	-	-
Top Speed - Loaded	-	-	-	35.5 mile/h	-	37.3 mile/h
Final Drives
Differential Ratio	1.92:1	-	2.74:1	2.35:1	-	1.8:1
Planetary Ratio	4.80:1	-	4.80:1	10.83:1	-	16:01
Total Reduction Ratio	9.26:1	-	13.14:1	25.46:1	35:01:00	26.8:1
Type	-	-	-	Double reduction, planetary with full floating axles	-	-
Brakes
Brake Surface - Front	216 in²	-	216 in²	-	-	13921 in²
Brake Surface - Rear	6235 in²	-	7794 in²	-	-	20847 in²
Brake Standards	ISO 3450:2011	-	ISO 3450:2011	-	-	-
Note	Target gross machine operating weight is 71 214 kg (157,000 lb).	-	-	-	-	-
Standards	-	-	-	-	-	J-ISO 3450 JAN88, ISO 3450:1996
Body Hoists
Pump Flow - High Idle	118 gal/min	-	112 gal/min	106.5 gal/min	-	224 gal/min
Relief Valve Setting - Raise	2750 psi	-	2750 psi	2749 psi	3029 psi	2955 psi
Relief Valve Setting - Lower	500 psi	-	500 psi	-	-	-
Body Raise Time - High Idle	7.5 s	-	8 s	14 s	24 s	19 s
Body Lower Time - Float	10 s	-	10 s	16 s	-	20 s
Body Power Down - High Idle	10 s	-	10 s	-	-	17.5 s
Type	-	-	-	Twin, two-stage hydraulic cylinders with snubbing valve.	-	Twin, two-stage hydraulic cylinders with snubbing valve
Pump Flow - High Idle (HAA at 1,800 rpm)	-	-	-	-	221 gal/min	-
Pump Flow - High Idle (LAA at 1,960 rpm)	-	-	-	-	240 gal/min	-
High Idle Body Lower Time - Float	-	-	-	-	20 s	-
Total Cycle Time	-	-	-	-	44 s	-
Note (1)	-	-	-	-	Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages.	-
Note (2)	-	-	-	-	Power raise in both stages; power down in both stages possible.	-
Note (3)	-	-	-	-	Automatic body-lower modulation reduces impact on frame.	-
Capacity - Dual Slope - 100% Fill Factor
Struck	23.01 yd³	-	31.3 yd³	-	-	-
Heaped (SAE 2:1)*	32.9 yd³	-	-	-	-	-
Note (2)	*ISO 6483:1980.	-	-	-	-	-
Note (1)	Contact your local Cat dealer for body recommendation.	-	-	-	-	-
Heaped 2:1 (SAE)	-	-	40.8 yd³	-	-	-
Capacity - Flat Floor - 100% Fill Factor
Struck	23.01 yd³	-	31.3 yd³	-	-	-
Heaped (SAE 2:1)*	32.9 yd³	-	-	-	-	-
Note (1)	Contact your local Cat dealer for body recommendation.	-	-	-	-	-
Note (2)	*ISO 6483:1980.	-	-	-	-	-
Heaped 2:1 (SAE)	-	-	40.9 yd³	-	-	-
Weight Distributions - Approximate
Front Axle - Empty	49 %	-	51.4 %	50%	49 %	48 %
Front Axle - Loaded	34 %	-	34.2 %	33%	33 %	33 %
Rear Axle - Empty	51 %	-	48.6 %	50%	51 %	52 %
Rear Axle - Loaded	66 %	-	65.8 %	67%	67 %	67 %
Suspension
Empty Loaded Cylinder Stroke Front	9.2 in	-	9.2 in	-	-	-
Empty Loaded Cylinder Stroke Rear	5.9 in	-	5.8 in	-	-	-
Rear axle - Oscillation	8.9 °	-	8.9 °	+/- 5 degrees	-	±4.9 degrees
Type	-	-	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments	-	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front	-	-	-	4.12 in	-	5.1 in
Effective Cylinder Stroke - Rear	-	-	-	3.67 in	-	4.2 in
Service Refill Capacities
Fuel Tank	140 gal (US)	-	140 gal (US)	1000 gal (US)	1300 gal (US)	750 gal (US)
Cooling System	33 gal (US)	9.5 gal (US)	33 gal (US)	180 gal (US)	211 gal (US)	284 gal (US)
Crankcase	17 gal (US)	-	17 gal (US)	77 gal (US)	82 gal (US)	82 gal (US)
Differential - Final Drives	47 gal (US)	-	47 gal (US)	-	-	-
Steering Tank	14.5 gal (US)	-	14.5 gal (US)	-	-	-
Steering System - Including Tank	23 gal (US)	-	23 gal (US)	-	-	77 gal (US)
Brake/Hoist Hydraulic Tank	38 gal (US)	-	38 gal (US)	-	-	-
Brake Hoist System	60 gal (US)	-	60 gal (US)	169 gal (US)	-	-
Torque Converter - Transmission System	17 gal (US)	-	17 gal (US)	-	-	-
DEF Tank	6 gal (US)	-	6 gal (US)	-	-	-
Fuel Tank Capacity	-	92.5 gal (US)	-	-	-	-
Diesel Exhaust Fluid Tank	-	7.9 gal (US)	-	62 gal (US)	100 gal (US)	62 gal (US)
Engine Oil	-	3.4 gal (US)	-	-	-	-
Hydraulic Tank	-	40.9 gal (US)	-	-	296 gal (US)	-
Hydraulic System - Including Tank	-	91.1 gal (US)	-	-	385 gal (US)	-
Rear Axle - Housing (Differential)	-	3.7 gal (US)	-	-	-	-
Front Steering Axle - Differential	-	2.8 gal (US)	-	-	-	-
Final Drive - Each	-	0.7 gal (US)	-	-	67 gal (US)	-
Powershift Transmission	-	0.7 gal (US)	-	-	-	-
Fuel Tank - Standard	-	-	-	550 gal (US)	-	-
Fuel Tank (Tier 4)	-	-	-	55 gal (US)	-	-
Front Wheels - Each	-	-	-	5.8 gal (US)	-	-
Differentials	-	-	-	161 gal (US)	-	-
Steering System	-	-	-	42 gal (US)	-	-
Steering System - Includes Tank	-	-	-	46 gal (US)	-	-
Brake Hoist System - Includes Tank	-	-	-	347 gal (US)	-	347 gal (US)
Torque Converter - Transmission System - Including Sump	-	-	-	55 gal (US)	-	-
Note (1)	-	-	-	-	DEF Tank only available for EPA Tier 4 / EU Stage V engine option.	DEF Tank only available for EPA Tier 4 engine option.
Fuel Tank - Optional	-	-	-	-	-	1300 gal (US)
Rear Axle - Housing	-	-	-	-	-	260 gal (US)
Torque Converter - Transmission Sump	-	-	-	-	-	27 gal (US)
Torque Converter/Transmission System - Including Sump	-	-	-	-	-	55 gal (US)
Steering
Steering Standards	ISO 5010:2007	-	ISO 5010:2007	ISO 5010:2019	ISO 5010:2019	SAE J15111 OCT90, ISO 5010:1992
Steer Angle	40.5 °	-	40.5 °	36.07 °	39 °	36 °
Turning Diameter - Front	57.7 ft	-	57.7 ft	-	-	93.2 ft
Turning Circle - Clearance Diameter	66.6 ft	-	66.6 ft	-	-	-
Note	Target gross machine operating weight is 71 214 kg (157,000 lb).	-	-	-	Gross Machine Operating Weight is 521 631 kg (1,150,000 lb).	-
Tires
Standard Tire	18.00R33 (E4)	-	21.00R33 (E4)	-	-	-
Note (1)	Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.	-	-	Quick Change Rims optional	Quick Change Rims optional.	Extended life wheel stations optional.
Note (2)	Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.	-	-	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Standard Tires	-	-	-	37 R57	53/80 R63	40.00 R57
Optional Tires	-	-	-	40 R57	-	-
Optional Tire	-	-	-	42/90 R57	-	-
Rims	-	-	-	29” x 57” Rims	36" x 63"	29" or 32"
Note	-	-	-	-	-	Quick Change Rims optional.
ROPS
ROPS Standards	Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-	ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.	-	-	-
FOPS Standards	Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.
Sound
Sound Standards (1)	Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.	-	Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.	Operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed.	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards (2)	Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).	-	Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A).	-	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.	-
Sound Standards (3)	Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.	-	Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.	-	-	-
Sound Standards	-	-	-	-	-	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Dimensions
Height - Top of ROPS	12.7 ft	-	12.8 ft	-	-	-
Overall Body Length	26.8 ft	-	26.8 ft	-	-	-
Inside Body Length	18.5 ft	-	19 ft	-	-	-
Overall Length	28.9 ft	-	28.9 ft	-	-	-
Wheel Base	13 ft	8.5 ft	13 ft	-	-	-
Rear Axle - Tail	8.5 ft	-	9.5 ft	-	-	-
Ground Clearance	1.6 ft	1 ft	1.6 ft	-	-	-
Dump Clearance	1.7 ft	-	1.5 ft	-	-	-
Loading Height - Empty	10.3 ft	-	11.6 ft	-	-	-
Inside Body Depth - Maximum	4.6 ft	-	5.7 ft	-	-	-
Overall Height - Body Raised	27.1 ft	-	27.1 ft	-	-	-
Operating Width	15.7 ft	-	15.7 ft	-	-	-
Centerline Front Tire Width	10.2 ft	-	10.4 ft	-	-	-
Engine Guard Clearance	1.8 ft	-	2 ft	-	-	-
Outside Body Width	12.9 ft	-	12.9 ft	-	-	-
Inside Body Width	11.9 ft	-	11.9 ft	-	-	-
Front Canopy Height	13.5 ft	-	13.7 ft	-	-	-
Rear Axle - Clearance	1.8 ft	-	1.9 ft	-	-	-
Centerline of Rear Dual Tire Width	8.3 ft	-	8.7 ft	-	-	-
Overall Tire Width	12.1 ft	-	12.9 ft	-	-	-
Boom	-	MH Boom 5.35 (17'7")	-	-	-	-
Stick	-	Straight 4.3 m (14'1")	-	-	-	-
Shipping Height (with OPG, without stick)	-	3350 mm	-	-	-	-
Shipping Length	-	27.3 ft	-	-	-	-
Shipping Length (with push blade)	-	28.3 ft	-	-	-	-
Machine Length	-	16.3 ft	-	-	-	-
Machine Length (with push blade)	-	17.8 ft	-	-	-	-
Tail Swing Radius	-	8.5 ft	-	-	-	-
Counterweight Clearance	-	4.3 ft	-	-	-	-
Cab Height- Lowered	-	11 ft	-	-	-	-
Cab Height-Lowered with OPG	-	11 ft	-	-	-	-
Cab Height-Raised	-	18.8 ft	-	-	-	-
Cab Height-Raised with OPG	-	18.8 ft	-	-	-	-
Shipping Width	-	8.3 ft	-	-	-	-
Undercarriage Length	-	16.1 ft	-	-	-	-
Undercarriage Length (with push blade)	-	17.6 ft	-	-	-	-
Upper Frame Width (including handrails)	-	8.3 ft	-	-	-	-
Machine Weights
Maximum Operating Weight	-	54000 lb	-	-	-	-
Minimum Operating Weight	-	46750 lb	-	-	-	-
Working Ranges
Maximum Reach	-	30.4 ft	-	-	-	-
Boom	-	MH Boom 5.35 (17'7")	-	-	-	-
Stick	-	Straight 4.3 m (14'1")	-	-	-	-
Maximum Height	-	35.3 ft	-	-	-	-
Minimum Dump Height	-	10.8 ft	-	-	-	-
Maximum Reach at Ground Line	-	28.5 ft	-	-	-	-
Maximum Depth	-	4.8 ft	-	-	-	-
Boom Pin Height	-	23.3 ft	-	-	-	-
Hydraulic System
Maximum Flow - Implement/Travel Circuit	-	81 gal/min	-	-	-	-
Maximum Pressure - Implements	-	5366 psi	-	-	-	-
Maximum Pressure - Travel	-	5076 psi	-	-	-	-
Maximum Pressure - Swing	-	5294 psi	-	-	-	-
Swing Mechanism
Swing Speed	-	8.2 r/min	-	-	-	-
Maximum Swing Torque	-	39553 lb/ft	-	-	-	-
Transmissions
Maximum Travel Speed (with joysticks)	-	9.3 mile/h	-	-	-	-
Braking System
Service Brakes	-	-	-	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area	-	-	-	12662 in²	20378 in²	13921 in³
Rear - Wet Disc Brake Surface Area	-	-	-	20861 in²	30750 in²	20847 in³
Standards	-	-	-	(Service and Secondary) ISO 3450:2011	ISO 3450:2011	(Service and Secondary): ISO 3450:1996
Parking Brake	-	-	-	Four-corner, Multi-disc, Spring applied, Hydraulically Released	Four-corner, Multi-disc, Spring applied, Hydraulically Released	-
Load Brake	-	-	-	-	Rear service brakes	Rear service brakes
Dynamic Retarding Power - Continuous	-	-	-	-	5480 hp	-
Parking Brakes	-	-	-	-	-	Four-corner, Multi-disc, Spring Applied, Hydraulically Released
Note	-	-	-	-	-	Anti-Lock Brake System (ABS) optional with CMD package
Capacity - HP Body - 100% Fill Factor
Struck	-	-	-	77 m3(101 yd3)	-	112.6-151 m³ (147-197.5 yd³)
Heaped (SAE 2:1)*	-	-	-	187	-	162-191 m³ (212-250 yd³)
Note (1)	-	-	-	Consult your local Cat dealer for body recommendations	-	Contact your local Cat dealer for body recommendation.
Note (2)	-	-	-	-	-	*ISO 6483:1980
Cab
Air Conditioning	-	-	-	(HFC - 134A refrigerant) 24,500 Btu/hr	-	Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr
Heater / Defroster	-	-	-	33300 Btu/h	-	38900 Btu/h
FOPS Standards	-	-	-	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.	Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer.	FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.
ROPS Standards (2)	-	-	-	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.	-	ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.
ROPS Standards (1)	-	-	-	-	Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer.	The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.
Note	-	-	-	-	-	Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
Dimensions (Approximate)
Height - Top of ROPS	-	-	-	5550 mm	22.25 ft	-
Overall Body Length	-	-	-	12945 mm	-	-
Inside Body Length	-	-	-	8730 mm	-	-
Overall Length	-	-	-	12970 mm	50.75 ft	-
Wheel Base	-	-	-	57000 mm	21.83 ft	-
Rear Axle - Tail	-	-	-	3856 mm	15.5 ft	-
Ground Clearance	-	-	-	1304 mm	2.67 ft	-
Dump Clearance	-	-	-	1585 mm	3 ft	-
Loading Height - Empty	-	-	-	6147 mm	22.92 ft	-
Rear Sidewall Height	-	-	-	1010 mm	-	-
Inside Body Depth - Maximum	-	-	-	3075 mm	-	-
Overall Height - Body Raised	-	-	-	11534 mm	48.42 ft	-
Operating Width	-	-	-	7822 mm	-	-
Centerline Front Tire Width	-	-	-	5410 mm	23 ft	-
Engine Guard Clearance	-	-	-	1290 mm	-	-
Overall Canopy Width	-	-	-	7769 mm	31.5 ft	-
Outside Body Width	-	-	-	7123 mm	29.75 ft	-
Inside Body Width	-	-	-	6920 mm	28.08 ft	-
Front Canopy Height	-	-	-	6739 mm	26.33 ft	-
Rear Axle - Clearance	-	-	-	1263 mm	3.08 ft	-
Centerline of Rear Dual Tire Width	-	-	-	4695 mm	18.75 ft	-
Overall Tire Width	-	-	-	7120 mm	28.67 ft	-
Front Axle Clearance	-	-	-	-	3.17 ft	-
Canopy Width (without optional rock deflectors)	-	-	-	-	29.75 ft	-
AC Drive System
Total Reduction Ratio	-	-	-	-	35:01:00	-
Top Speed - Loaded	-	-	-	-	37 mile/h	-
Generator/Alternator	-	-	-	-	Brushless, engine mounted, dual bearing	-
Controls	-	-	-	-	IGBT Inverter Technology, air cooled, pressurized cabinet with filtration	-
Wheel Motor	-	-	-	-	High-torque AC induction, rear axle mounted	-
Cooling System	-	-	-	-	Variable speed, hydraulically driven cooling system	-
Capacity - HE Body - 100% fill factor
Struck	-	-	-	-	108-133 m³ (142-175 yd³)	-
Heaped (SAE 2:1)	-	-	-	-	180-222 m³ (236-290 yd³)	-
Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate	-	-	-	-	0.63 in	-
Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate	-	-	-	-	0.35 in	-
Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate	-	-	-	-	0.31 in	-
Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate	-	-	-	-	0.2 in	-
Note	-	-	-	-	Contact your local Cat dealer for body recommendations.	-
Capacity - MSD II - 100% Fill Factor
Note	-	-	-	-	-	Contact your local Cat dealer for body recommendation.
Struck	-	-	-	-	-	112-142 m³ (146-186 yd³)
Heaped (SAE 2:1)	-	-	-	-	-	159-190 m3 (209-250 yd3)

Compare Equipment Go Back

770 Off-Highway Truck

MH3022 Wheel Material Handler

772 (07) Off-Highway Truck

789 Next Generation

794 AC Mining Truck

793F Mining Truck

Operating Specifications

Engine

Weights - Approximate

Transmission

Final Drives

Brakes

Body Hoists

Capacity - Dual Slope - 100% Fill Factor

Capacity - Flat Floor - 100% Fill Factor

Weight Distributions - Approximate

Suspension

Service Refill Capacities

Steering

Tires

ROPS

Sound

Dimensions

Machine Weights

Working Ranges

Hydraulic System

Swing Mechanism

Transmissions

Braking System

Capacity - HP Body - 100% Fill Factor

Cab

Dimensions (Approximate)

AC Drive System

Capacity - HE Body - 100% fill factor

Capacity - MSD II - 100% Fill Factor