Compare Equipment Go Back
 770 Off-Highway Truck |
 6060 Hydraulic Mining Shovel |
 775G Off-Highway Truck Bare Chassis |
 794 AC Mining Truck |
|
Operating Specifications |
||||
|---|---|---|---|---|
| Nominal Payload Class (100%) | 42.1 ton (US) | - | - | - |
| Top Speed - Loaded | 45.8 mile/h | - | - | - |
| Target Payload (100%) | 42.1 ton (US) | - | - | - |
| Maximum Working Payload (110%) | 46.3 ton (US) | - | - | - |
| Maximum Allowable Payload (120%)* | 50.5 ton (US) | - | - | - |
| Body Capacity - SAE 2:1 | 32.9 yd³ | - | - | - |
| Note (1) | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. | - | - | - |
| Note (2) | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. | - | - | - |
| Nominal Water Tank Capacity | - | - | 15000 gal (US) | - |
Engine |
||||
| Engine Model | Cat® C15 | 2 x Cat 3512E | Cat® C27 | Cat® C175-16 |
| Rated Engine Speed | 1700 r/min | - | - | - |
| Gross Power - SAE J1995:2014 | 515 hp | - | - | - |
| Net Power - SAE J1349:2011 | 477 hp | - | - | - |
| Net Power - ISO 9249 | 477 hp | - | - | - |
| Net Power - 80/1269/EEC | 489 hp | - | - | - |
| Net Power - ISO 14396 | 508 hp | - | - | - |
| Net Torque - SAE J1349 | 1834 ft·lbf | - | - | - |
| Number of Cylinders | 6 | - | - | - |
| Bore | 5.4 in | - | 5.4 in | 6.9 in |
| Stroke | 6.7 in | - | 6 in | 8.7 in |
| Displacement | 927.6 in³ | - | 1648 in³ | 5187 in³ |
| Note (1) | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. | - | - | Contact factory for high altitude configuration. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). | - | - | Tier 4 / EU Stage V option available for regions that require these emissions standards. |
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude. | - | - | Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW) |
| Note (4) | Meets Japan Small Volume Exemption. | - | - | - |
| Emissions | Meets U.S. EPA Tier 4 and EU Stage V emission standards. | - | - | - |
| Gross Power - SAE J1995 | - | - | 825 hp | 3500 hp |
| Rated Net Power - SAE J1349 | - | - | 683 hp | - |
| Note | - | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | - |
| Standard Gross Power - SAE J1995 | - | - | - | 3500 hp |
| Optional Gross Power - SAE J1995 | - | - | - | 3100 hp |
| Optional Gross Power - SAE J1995 (Option 2) | - | - | - | 2750 hp |
| Rated Speed | - | - | - | 1800 r/min |
| Net Power - SAE J1349 | - | - | - | 3405 hp |
| Emissions Rating | - | - | - | Fuel Optimized |
Weights - Approximate |
||||
| Target Gross Machine Operating Weight | 157000 lb | - | - | - |
| Target Gross Machine Weight | 157000 lb | - | - | - |
| Chassis Weight | 55948 lb | - | - | 426237 lb |
| Body Weight | 17306 lb | - | - | 64346 lb |
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. | - | - | Consult your tire manufacturer for maximum tire load. |
| Note (2) | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. | - | - | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires |
| Nominal Rated Payload | - | - | - | 327 ton (US) |
| Rated Gross Machine Weight | - | - | - | 1150000 lb |
| Note (3) | - | - | - | Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations. |
| Note (4) | - | - | - | Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg) |
Transmission |
||||
| Forward - 1 | 7.4 mile/h | - | 6.6 mile/h | - |
| Forward - 2 | 10.1 mile/h | - | 9.3 mile/h | - |
| Forward - 3 | 13.8 mile/h | - | 12.6 mile/h | - |
| Forward - 4 | 18.5 mile/h | - | 16.8 mile/h | - |
| Forward - 5 | 25.1 mile/h | - | 22.8 mile/h | - |
| Forward - 6 | 33.8 mile/h | - | 30.7 mile/h | - |
| Forward - 7 | 45.8 mile/h | - | 41.6 mile/h | - |
| Reverse | 8.8 mile/h | - | 8.7 mile/h | - |
| Note | Maximum travel speeds with standard 18.00R33 (E4) tires. | - | Maximum travel speeds with standard 24.00R35 (E4) tires | - |
Final Drives |
||||
| Differential Ratio | 1.92:1 | - | - | - |
| Planetary Ratio | 4.80:1 | - | - | - |
| Total Reduction Ratio | 9.26:1 | - | - | 35:01:00 |
Brakes |
||||
| Brake Surface - Front | 216 in² | - | 257 in² | - |
| Brake Surface - Rear | 6235 in² | - | 9497 in² | - |
| Brake Standards | ISO 3450:2011 | - | - | - |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). | - | - | - |
Body Hoists |
||||
| Pump Flow - High Idle | 118 gal/min | - | - | - |
| Relief Valve Setting - Raise | 2750 psi | - | - | 3029 psi |
| Relief Valve Setting - Lower | 500 psi | - | - | - |
| Body Raise Time - High Idle | 7.5 s | - | - | 24 s |
| Body Lower Time - Float | 10 s | - | - | - |
| Body Power Down - High Idle | 10 s | - | - | - |
| Pump Flow - High Idle (HAA at 1,800 rpm) | - | - | - | 221 gal/min |
| Pump Flow - High Idle (LAA at 1,960 rpm) | - | - | - | 240 gal/min |
| High Idle Body Lower Time - Float | - | - | - | 20 s |
| Total Cycle Time | - | - | - | 44 s |
| Note (1) | - | - | - | Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages. |
| Note (2) | - | - | - | Power raise in both stages; power down in both stages possible. |
| Note (3) | - | - | - | Automatic body-lower modulation reduces impact on frame. |
Capacity - Dual Slope - 100% Fill Factor |
||||
| Struck | 23.01 yd³ | - | - | - |
| Heaped (SAE 2:1)* | 32.9 yd³ | - | - | - |
| Note (2) | *ISO 6483:1980. | - | - | - |
| Note (1) | Contact your local Cat dealer for body recommendation. | - | - | - |
Capacity - Flat Floor - 100% Fill Factor |
||||
| Struck | 23.01 yd³ | - | - | - |
| Heaped (SAE 2:1)* | 32.9 yd³ | - | - | - |
| Note (1) | Contact your local Cat dealer for body recommendation. | - | - | - |
| Note (2) | *ISO 6483:1980. | - | - | - |
Weight Distributions - Approximate |
||||
| Front Axle - Empty | 49 % | - | - | 49 % |
| Front Axle - Loaded | 34 % | - | - | 33 % |
| Rear Axle - Empty | 51 % | - | - | 51 % |
| Rear Axle - Loaded | 66 % | - | - | 67 % |
Suspension |
||||
| Empty Loaded Cylinder Stroke Front | 9.2 in | - | - | - |
| Empty Loaded Cylinder Stroke Rear | 5.9 in | - | - | - |
| Rear axle - Oscillation | 8.9 ° | - | - | - |
Service Refill Capacities |
||||
| Fuel Tank | 140 gal (US) | 3136 gal (US) | - | 1300 gal (US) |
| Cooling System | 33 gal (US) | 211.4 gal (US) | 45 gal (US) | 211 gal (US) |
| Crankcase | 17 gal (US) | - | 24 gal (US) | 82 gal (US) |
| Differential - Final Drives | 47 gal (US) | - | 38 gal (US) | - |
| Steering Tank | 14.5 gal (US) | - | - | - |
| Steering System - Including Tank | 23 gal (US) | - | 14 gal (US) | - |
| Brake/Hoist Hydraulic Tank | 38 gal (US) | - | 46.5 gal (US) | - |
| Brake Hoist System | 60 gal (US) | - | 85 gal (US) | - |
| Torque Converter - Transmission System | 17 gal (US) | - | - | - |
| DEF Tank | 6 gal (US) | - | - | - |
| Hydraulic Tank | - | 1876 gal (US) | - | 296 gal (US) |
| Hydraulic System - Including Tank | - | 2483 gal (US) | - | 385 gal (US) |
| Engine Oil | - | 86.6 gal (US) | - | - |
| Swing Drive | - | 42.4 gal (US) | - | - |
| Grease Tank | - | 188 gal (US) | - | - |
| Fuel Tank Capacity | - | - | 210 gal (US) | - |
| Final Drive - Each | - | - | - | 67 gal (US) |
| Diesel Exhaust Fluid Tank | - | - | - | 100 gal (US) |
| Note (1) | - | - | - | DEF Tank only available for EPA Tier 4 / EU Stage V engine option. |
Steering |
||||
| Steering Standards | ISO 5010:2007 | - | ISO 5010:2007 | ISO 5010:2019 |
| Steer Angle | 40.5 ° | - | 31 ° | 39 ° |
| Turning Diameter - Front | 57.7 ft | - | - | - |
| Turning Circle - Clearance Diameter | 66.6 ft | - | 85.6 ft | - |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). | - | - | Gross Machine Operating Weight is 521 631 kg (1,150,000 lb). |
| Turning Diameter | - | - | 77.1 ft | - |
Tires |
||||
| Standard Tire | 18.00R33 (E4) | - | - | - |
| Note (1) | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. | - | - | Quick Change Rims optional. |
| Note (2) | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. | - | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
| Standard Tires | - | - | - | 53/80 R63 |
| Rims | - | - | - | 36" x 63" |
ROPS |
||||
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - | - | - |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. | - | - | - |
| Tractor ROPS | - | - | 85288 lb | - |
Sound |
||||
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. | - | - | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed. |
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). | - | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Sound Standards (3) | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. | - | - | - |
Dimensions |
||||
| Height - Top of ROPS | 12.7 ft | - | - | - |
| Overall Body Length | 26.8 ft | - | - | - |
| Inside Body Length | 18.5 ft | - | - | - |
| Overall Length | 28.9 ft | - | - | - |
| Wheel Base | 13 ft | - | - | - |
| Rear Axle - Tail | 8.5 ft | - | - | - |
| Ground Clearance | 1.6 ft | - | - | - |
| Dump Clearance | 1.7 ft | - | - | - |
| Loading Height - Empty | 10.3 ft | - | - | - |
| Inside Body Depth - Maximum | 4.6 ft | - | - | - |
| Overall Height - Body Raised | 27.1 ft | - | - | - |
| Operating Width | 15.7 ft | - | - | - |
| Centerline Front Tire Width | 10.2 ft | - | - | - |
| Engine Guard Clearance | 1.8 ft | - | - | - |
| Outside Body Width | 12.9 ft | - | - | - |
| Inside Body Width | 11.9 ft | - | - | - |
| Front Canopy Height | 13.5 ft | - | - | - |
| Rear Axle - Clearance | 1.8 ft | - | - | - |
| Centerline of Rear Dual Tire Width | 8.3 ft | - | - | - |
| Overall Tire Width | 12.1 ft | - | - | - |
General |
||||
| Engine Output - SAE J1995 | - | 3015 hp | - | - |
| Bucket Payload | - | 67 ton (US) | - | - |
| Operating Weight | - | 660 ton (US) | - | - |
| Note | - | Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. | - | - |
Diesel Engines |
||||
| Rated Speed | - | 1,800 min-1 (1,800 rpm) | - | - |
| Number of Cylinders - Each Engine | - | 12 | - | - |
| Bore | - | 6.69 in | - | - |
| Stroke | - | 8.46 in | - | - |
| Displacement | - | 3574 in³ | - | - |
| Aspiration | - | Turbocharged and charge air-cooled | - | - |
| Components (1) | - | Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) | - | - |
| Components (2) | - | High-capacity water separator | - | - |
| Components (3) | - | Two-stage fuel filter with series filtration | - | - |
| Components (4) | - | Heavy-duty air filters | - | - |
| Components (5) | - | Microprocessed engine management | - | - |
| Components (6) | - | Hydraulically driven radiator fan with electronically controlled fan speed | - | - |
| Components (7) | - | Exhaust manifold and turbo heat shields | - | - |
Diesel Engine - Lesser Regulated |
||||
| Gross Power - SAE J1995 | - | 3025 hp | - | - |
| Net Power - ISO 9249 | - | 2990 hp | - | - |
| Net Power - SAE J1349 | - | 2821 hp | - | - |
| Emissions | - | Optimized for fuel consumption. | - | - |
Diesel Engine - Highly Regulated |
||||
| Gross Power - SAE J1995 | - | 3015 hp | - | - |
| Net Power - SAE J1349 | - | 2810 hp | - | - |
| Net Power - ISO 9249 | - | 2979 hp | - | - |
| Emissions | - | Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. | - | - |
Electrical System |
||||
| System Voltage | - | 24 V | - | - |
| Batteries in Series/Parallel Installation | - | 6 x 210 Ah; 12 V each; 630 Ah 24 V in total | - | - |
| Components (1) | - | 6 maintenance-free batteries | - | - |
| Components (2) | - | Lockable battery isolator switch | - | - |
| Components (3) | - | Lockable starter isolator switch | - | - |
| Components (4) | - | 13 LED high-brightness working flood lights | - | - |
| Components (5) | - | 17 LED service lights | - | - |
| Components (6) | - | 2 electric horns (1 cab module; 1 oil cooler module) | - | - |
Operating Weights |
||||
| 6060 FS - Standard Track Pads | - | 4.58 ft | - | - |
| 6060 FS - Operating Weight | - | 1320110 lb | - | - |
| 6060 FS - Ground Pressure | - | 26.6 N/cm2 (38.5 psi) | - | - |
| Backhoe - Standard Track Pads | - | 4.58 ft | - | - |
| Backhoe - Operating Weight | - | 1323860 lb | - | - |
| Backhoe - Ground Pressure | - | 26.7 N/cm2 (38.7 psi) | - | - |
| Note | - | Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. | - | - |
Hydraulic System with Pump Managing System |
||||
| Main Pumps - Diesel Version | - | 8 variable swash plate pumps | - | - |
| Main Pumps - Maximum Oil Flow - Diesel Version | - | 8 x 650 L/min (8 x 172 gal/min) | - | - |
| Maximum Pressure - Attachment | - | 4640 psi | - | - |
| Maximum Pressure - Travel | - | 5220 psi | - | - |
| Swing Pumps - Diesel Version | - | 4 reversible swash plate pumps | - | - |
| Swing Pumps - Maximum Oil Flow - Diesel Version | - | 4 x 352 L/min (4 x 93 gal/min) | - | - |
| Maximum Pressure - Swing Pumps | - | 5075 psi | - | - |
Hydraulic Oil Cooling |
||||
| Oil Flow of Cooling Pumps | - | 4 x 488 L/min (4 x 129 gal/min) | - | - |
| Components | - | 4 cooling fans | - | - |
| Diameter - Fan | - | 46 in | - | - |
| Features (1) | - | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running | - | - |
| Features (2) | - | Fan speed and flow of oil to the coolers are thermostatically controlled | - | - |
| Features (3) | - | Extremely high cooling efficiency to ensure optimum oil temperature | - | - |
| Features (4) | - | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers | - | - |
Swing System |
||||
| Swing Drive | - | 4 compact planetary transmissions with axial piston motors | - | - |
| Parking Brakes | - | Wet multiple disc brake, spring loaded/hydraulically released | - | - |
| Maximum Swing Speed | - | 3.8 r/min | - | - |
| Swing Ring | - | Triple-race roller bearing with sealed internal gearing | - | - |
| Features (1) | - | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody | - | - |
| Features (2) | - | Closed-loop swing circuit with torque control | - | - |
| Features (3) | - | Hydraulic braking of the swing motion by counteracting control | - | - |
| Features (4) | - | All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system | - | - |
Undercarriage |
||||
| Travel Speed - 1st Stage - Maximum | - | 0.68 mile/h | - | - |
| Travel Speed - 2nd Stage - Maximum | - | 0.99 mile/h | - | - |
| Maximum Tractive Force | - | 661160 lb | - | - |
| Gradeability - Travel Drives - Maximum | - | 39 % | - | - |
| Track Pads - Each Side | - | 42 | - | - |
| Bottom Rollers - Each Side | - | 7 | - | - |
| Support Rollers - Each Side | - | 2 plus a skid plate in between | - | - |
| Travel Drives - Each Side | - | 1 planetary transmission with 2 two-stage axial piston motors | - | - |
| Components (1) | - | HD tracks with cast double-grouser track pad | - | - |
| Components (2) | - | HD fixed axle rollers and idlers | - | - |
| Components (3) | - | Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas | - | - |
| Components (4) | - | Acoustic travel alarm (forward and reverse) | - | - |
| Components (5) | - | Fully hydraulic, self-adjusting track tensioning system with piston accumulator | - | - |
| Components (6) | - | Automatic hydraulic retarder valve to prevent over-speed on downhill travel | - | - |
Operator's Cab |
||||
| Operator's Eye Level - Approximately | - | 24.91 ft | - | - |
| Internal Dimensions of Cab - Length | - | 7.33 ft | - | - |
| Internal Dimensions of Cab - Width | - | 5.33 ft | - | - |
| Internal Dimensions of Cab - Height | - | 6.75 ft | - | - |
| Components (1) | - | Single hydraulically driven HVAC System, with dual system option | - | - |
| Components (2) | - | In-floor window with removable grate | - | - |
| Components (3) | - | Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support | - | - |
| Components (4) | - | Independently adjustable seat consoles with integrated joysticks | - | - |
| Components (5) | - | Operator Protective Guard (Top Guard) (ISO 10262:1998) | - | - |
| Components (6) | - | Elevated full-size trainer seat with safety belt and laptop desk | - | - |
| Components (7) | - | Additional fold-away auxiliary seat with safety belt | - | - |
| Components (8) | - | Operator Presence switch | - | - |
| Components (9) | - | Monitoring system with 254 mm (10 in) touch screen | - | - |
| Components (10) | - | Powered 45 degree access stairway | - | - |
| Components (11) | - | Emergency egress ladder | - | - |
| Components (12) | - | FM/AM radio with USB and AUX input | - | - |
| Components (13) | - | Roller blinds on 3 front windows | - | - |
| Components (14) | - | 3 cup holders | - | - |
| Components (15) | - | Cat Electronic Technician service port | - | - |
Automatic Lubrication System |
||||
| Capacity - Grease Container | - | 188 gal (US) | - | - |
| Type (1) | - | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times | - | - |
| Type (2) | - | System failures displayed by monitoring system | - | - |
| Type (3) | - | Grease filters (200 µm) between service station and container as well as directly behind grease pump | - | - |
| Type (4) | - | Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring | - | - |
Attachments |
||||
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | - | Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces | - | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | - | Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance | - | - |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - | Constant boom momentum throughout the entire lift arc; Crowd force assistance | - | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | - | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth | - | - |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - | Wing shrouds on side walls and heel shrouds at bottom edges | - | - |
| Type (1) | - | Catwalks with rails at booms (FS and BH) | - | - |
| Type (2) | - | Guards for shovel cylinders (FS) | - | - |
| Type (3) | - | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve | - | - |
| Type (4) | - | Service access holes from both sides of boom (FS and BH) and stick (FS) | - | - |
| Type (5) | - | Welding procedures allow for internal counter-welding (double prep weld) wherever possible | - | - |
| Type (6) | - | Booms and sticks are stress-relieved after welding | - | - |
| Type (7) | - | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas | - | - |
| Type (8) | - | Special wear packages for highly abrasive materials available upon request | - | - |
Digging Forces |
||||
| Maximum Crowd Force | - | 494410 lb | - | - |
| Maximum Breakout Force | - | 388780 lb | - | - |
Working Ranges |
||||
| Maximum Digging Height | - | 51.17 ft | - | - |
| Maximum Digging Reach | - | 54.17 ft | - | - |
| Maximum Digging Depth | - | 9.17 ft | - | - |
Standard Bucket Capacity |
||||
| Face Shovel (heaped 2:1) | - | 44.5 yd³ | - | - |
| Backhoe (heaped 1:1) | - | 44.5 yd³ | - | - |
Backhoe Attachment (BH) - Digging Forces |
||||
| Stick Digging Force - ISO | - | 295740 lb | - | - |
| Bucket Digging Force - ISO | - | 274840 lb | - | - |
Backhoe Attachment (BH) - Working Range |
||||
| Maximum Digging Height | - | 52.83 ft | - | - |
| Maximum Digging Reach | - | 62.33 ft | - | - |
| Maximum Digging Depth | - | 29.17 ft | - | - |
Retractable Service Station |
||||
| Installation | - | Retractable service station installed underneath the engine module and easily accessible from ground. | - | - |
| Equipped With (1) | - | Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container | - | - |
| Equipped With (2) | - | Cat jump-start socket | - | - |
| Equipped With (3) | - | Indicator lights | - | - |
Weights |
||||
| LRC Bare Chassis Weight without Hoist | - | - | 75118 lb | - |
| LRC Bare Chassis Weight with Hoist | - | - | 76326 lb | - |
| LRC Gross Vehicle Weight (Target) without Hoist | - | - | 246503 lb | - |
| LRC Gross Vehicle Weight (Target) with Hoist | - | - | 246503 lb | - |
| HRC Bare Chassis Weight without Hoist | - | - | 76573 lb | - |
| HRC Bare Chassis Weight with Hoist | - | - | 77781 lb | - |
| HRC Gross Vehicle Weight (Target) without Hoist | - | - | 246503 lb | - |
| HRC Gross Vehicle Weight (Target) with Hoist | - | - | 246503 lb | - |
| Note | - | - | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - |
AC Drive System |
||||
| Total Reduction Ratio | - | - | - | 35:01:00 |
| Top Speed - Loaded | - | - | - | 37 mile/h |
| Generator/Alternator | - | - | - | Brushless, engine mounted, dual bearing |
| Controls | - | - | - | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
| Wheel Motor | - | - | - | High-torque AC induction, rear axle mounted |
| Cooling System | - | - | - | Variable speed, hydraulically driven cooling system |
Braking System |
||||
| Service Brakes | - | - | - | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
| Front Wet Disc Brake Surface Area | - | - | - | 20378 in² |
| Rear - Wet Disc Brake Surface Area | - | - | - | 30750 in² |
| Standards | - | - | - | ISO 3450:2011 |
| Parking Brake | - | - | - | Four-corner, Multi-disc, Spring applied, Hydraulically Released |
| Load Brake | - | - | - | Rear service brakes |
| Dynamic Retarding Power - Continuous | - | - | - | 5480 hp |
Capacity - HE Body - 100% fill factor |
||||
| Struck | - | - | - | 108-133 m³ (142-175 yd³) |
| Heaped (SAE 2:1) | - | - | - | 180-222 m³ (236-290 yd³) |
| Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate | - | - | - | 0.63 in |
| Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate | - | - | - | 0.35 in |
| Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate | - | - | - | 0.31 in |
| Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate | - | - | - | 0.2 in |
| Note | - | - | - | Contact your local Cat dealer for body recommendations. |
Dimensions (Approximate) |
||||
| Height - Top of ROPS | - | - | - | 22.25 ft |
| Overall Length | - | - | - | 50.75 ft |
| Wheel Base | - | - | - | 21.83 ft |
| Rear Axle - Tail | - | - | - | 15.5 ft |
| Ground Clearance | - | - | - | 2.67 ft |
| Dump Clearance | - | - | - | 3 ft |
| Loading Height - Empty | - | - | - | 22.92 ft |
| Overall Height - Body Raised | - | - | - | 48.42 ft |
| Centerline Front Tire Width | - | - | - | 23 ft |
| Front Axle Clearance | - | - | - | 3.17 ft |
| Canopy Width (without optional rock deflectors) | - | - | - | 29.75 ft |
| Outside Body Width | - | - | - | 29.75 ft |
| Inside Body Width | - | - | - | 28.08 ft |
| Front Canopy Height | - | - | - | 26.33 ft |
| Rear Axle - Clearance | - | - | - | 3.08 ft |
| Centerline of Rear Dual Tire Width | - | - | - | 18.75 ft |
| Overall Tire Width | - | - | - | 28.67 ft |
| Overall Canopy Width | - | - | - | 31.5 ft |
Cab |
||||
| ROPS Standards (1) | - | - | - | Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer. |
| FOPS Standards | - | - | - | Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer. |
Add a Similar Product:
