CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    770 Off-Highway Truck
    View Product
    6060 Hydraulic Mining Shovel
    View Product Remove
    772G Off-Highway Truck Bare Chassis
    View Product Remove
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove

    Operating Specifications
    Nominal Payload Class (100%) 42.1 ton (US) - - -
    Top Speed - Loaded 45.8 mile/h - - -
    Target Payload (100%) 42.1 ton (US) - - -
    Maximum Working Payload (110%) 46.3 ton (US) - - -
    Maximum Allowable Payload (120%)* 50.5 ton (US) - - -
    Body Capacity - SAE 2:1 32.9 yd³ - - -
    Note (1) *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. - - -
    Note (2) Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. - - -
    Nominal Water Tank Capacity - - 11000 gal (US) -

    Engine
    Engine Model Cat® C15 2 x Cat 3512E Cat® C18 Cat 3512E
    Rated Engine Speed 1700 r/min - 1700 r/min -
    Gross Power - SAE J1995:2014 515 hp - - -
    Net Power - SAE J1349:2011 477 hp - - -
    Net Power - ISO 9249 477 hp - - -
    Net Power - 80/1269/EEC 489 hp - - -
    Net Power - ISO 14396 508 hp - - -
    Net Torque - SAE J1349 1834 ft·lbf - - -
    Number of Cylinders 6 - 6 -
    Bore 5.4 in - 5.7 in 6.7 in
    Stroke 6.7 in - 7.2 in 8.5 in
    Displacement 927.6 in³ - 1105 in³ 3573 in³
    Note (1) Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). - - U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) No engine derating required up to 3000 m (9,843 ft) altitude. - - Additional fuel optimized selectable power ratings: 1,450 hp
    Note (4) Meets Japan Small Volume Exemption. - - -
    Emissions Meets U.S. EPA Tier 4 and EU Stage V emission standards. - - -
    Gross Power - SAE J1995 - - 605 hp 1600 hp
    Rated Net Power - SAE J1349 - - 550 hp -
    Note - - Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. -
    Net Power - SAE J1349 - - - 1509 hp
    Emissions Rating - - - Fuel Optimized

    Weights - Approximate
    Target Gross Machine Operating Weight 157000 lb - - -
    Target Gross Machine Weight 157000 lb - - -
    Chassis Weight 55948 lb - - -
    Body Weight 17306 lb - - 57779 lb
    Note (1) Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. - - Consult your tire manufacturer for maximum tire load
    Note (2) Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. - - Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Nominal Rated Payload (36.00R51 Tires) - - - 162 ton (US)
    Rated Gross Machine Weight (36.00R51 tires) - - - 564000 lb
    Nominal Rated Payload (33.00R51 Tires) - - - 158 ton (US)
    Rated Gross Machine Weight (33.00R51 tires) - - - 550000 lb
    Chassis Weight (33.00R51 Tires) - - - 186799 lb
    Chassis Weight (36.00R51 Tires) - - - 193192 lb
    Note (3) - - - Body weight varies depending on body selection and configuration.

    Transmission
    Forward - 1 7.4 mile/h - 8 mile/h 7.4 mile/h
    Forward - 2 10.1 mile/h - 10.9 mile/h 10 mile/h
    Forward - 3 13.8 mile/h - 14.8 mile/h 13.7 mile/h
    Forward - 4 18.5 mile/h - 19.8 mile/h 18.5 mile/h
    Forward - 5 25.1 mile/h - 26.9 mile/h 25 mile/h
    Forward - 6 33.8 mile/h - 36.2 mile/h 35.6 mile/h
    Forward - 7 45.8 mile/h - 49.2 mile/h -
    Reverse 8.8 mile/h - 10.4 mile/h 7.2 mile/h
    Note Maximum travel speeds with standard 18.00R33 (E4) tires. - Maximum travel speeds with standard 21.00R33 (E4) tires. Maximum travel speeds with standard 33.00-R51 tires.
    Top Speed - Loaded - - - 35.6 mile/h

    Final Drives
    Differential Ratio 1.92:1 - - 2:10:01
    Planetary Ratio 4.80:1 - - 10.83:1
    Total Reduction Ratio 9.26:1 - - 22.75:1
    Type - - - Double reduction, planetary with full floating axles.

    Brakes
    Brake Surface - Front 216 in² - 216 in² -
    Brake Surface - Rear 6235 in² - 7794 in² -
    Brake Standards ISO 3450:2011 - - -
    Note Target gross machine operating weight is 71 214 kg (157,000 lb). - - -

    Body Hoists
    Pump Flow - High Idle 118 gal/min - - 223 gal/min
    Relief Valve Setting - Raise 2750 psi - - 2500 psi
    Relief Valve Setting - Lower 500 psi - - -
    Body Raise Time - High Idle 7.5 s - - 15 s
    Body Lower Time - Float 10 s - - 15.6 s
    Body Power Down - High Idle 10 s - - -
    Type - - - Twin, two-stage hydraulic cylinders with snubbing valve.
    Body Power Down- High Idle - - - 15.5 s

    Capacity - Dual Slope - 100% Fill Factor
    Struck 23.01 yd³ - - -
    Heaped (SAE 2:1)* 32.9 yd³ - - -
    Note (2) *ISO 6483:1980. - - -
    Note (1) Contact your local Cat dealer for body recommendation. - - -

    Capacity - Flat Floor - 100% Fill Factor
    Struck 23.01 yd³ - - -
    Heaped (SAE 2:1)* 32.9 yd³ - - -
    Note (1) Contact your local Cat dealer for body recommendation. - - -
    Note (2) *ISO 6483:1980. - - -

    Weight Distributions - Approximate
    Front Axle - Empty 49 % - - 48%
    Front Axle - Loaded 34 % - - 33%
    Rear Axle - Empty 51 % - - 52%
    Rear Axle - Loaded 66 % - - 67%
    Note - - - Weight distributions optimized with Cat body.

    Suspension
    Empty Loaded Cylinder Stroke Front 9.2 in - - -
    Empty Loaded Cylinder Stroke Rear 5.9 in - - -
    Rear axle - Oscillation 8.9 ° - - +/- 5.4 degrees
    Type - - - Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front - - - 12.6 in
    Effective Cylinder Stroke - Rear - - - 6.5 in

    Service Refill Capacities
    Fuel Tank 140 gal (US) 3136 gal (US) - 410 gal (US)
    Cooling System 33 gal (US) 211.4 gal (US) 33 gal (US) 126 gal (US)
    Crankcase 17 gal (US) - 17 gal (US) 54 gal (US)
    Differential - Final Drives 47 gal (US) - 47 gal (US) 139 gal (US)
    Steering Tank 14.5 gal (US) - - 29 gal (US)
    Steering System - Including Tank 23 gal (US) - 60 gal (US) -
    Brake/Hoist Hydraulic Tank 38 gal (US) - 38 gal (US) -
    Brake Hoist System 60 gal (US) - 60 gal (US) -
    Torque Converter - Transmission System 17 gal (US) - 17 gal (US) -
    DEF Tank 6 gal (US) - - -
    Hydraulic Tank - 1876 gal (US) - -
    Hydraulic System - Including Tank - 2483 gal (US) - -
    Engine Oil - 86.6 gal (US) - -
    Swing Drive - 42.4 gal (US) - -
    Grease Tank - 188 gal (US) - -
    Fuel Tank Capacity - - 140 gal (US) -
    Diesel Exhaust Fluid Tank - - - 36 gal (US)
    Front Wheels - Each - - - 7.1 gal (US)
    Steering System - Includes Tank - - - 31 gal (US)
    Brake/Hoist Tank - - - 135 gal (US)
    Brake Hoist System - Includes Tank - - - 143 gal (US)
    Torque Converter - Transmission System - Including Sump - - - 46 gal (US)

    Steering
    Steering Standards ISO 5010:2007 - ISO 5010:2007 ISO 5010:2019
    Steer Angle 40.5 ° - 31 ° 25.1 °
    Turning Diameter - Front 57.7 ft - - -
    Turning Circle - Clearance Diameter 66.6 ft - 66.6 ft -
    Note Target gross machine operating weight is 71 214 kg (157,000 lb). - - -
    Turning Diameter - - 57.7 ft -
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - - - 96.6 ft

    Tires
    Standard Tire 18.00R33 (E4) - - 33.00R51
    Note (1) Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. - - Quick Change Rims optional.
    Note (2) Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. - - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Optional Tire - - - 36.00R51
    Rims - - - 610 mm (24") Rims (standard). 660 mm (26") Rims (optional).

    ROPS
    ROPS Standards Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. - - -
    FOPS Standards Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. - - -
    Tractor ROPS - - 77430 lb -

    Sound
    Sound Standards (1) Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. - - -
    Sound Standards (2) Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). - - -
    Sound Standards (3) Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. - - -
    Sound Standards - - - The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.

    Dimensions
    Height - Top of ROPS 12.7 ft - - -
    Overall Body Length 26.8 ft - - -
    Inside Body Length 18.5 ft - - -
    Overall Length 28.9 ft - - -
    Wheel Base 13 ft - - -
    Rear Axle - Tail 8.5 ft - - -
    Ground Clearance 1.6 ft - - -
    Dump Clearance 1.7 ft - - -
    Loading Height - Empty 10.3 ft - - -
    Inside Body Depth - Maximum 4.6 ft - - -
    Overall Height - Body Raised 27.1 ft - - -
    Operating Width 15.7 ft - - -
    Centerline Front Tire Width 10.2 ft - - -
    Engine Guard Clearance 1.8 ft - - -
    Outside Body Width 12.9 ft - - -
    Inside Body Width 11.9 ft - - -
    Front Canopy Height 13.5 ft - - -
    Rear Axle - Clearance 1.8 ft - - -
    Centerline of Rear Dual Tire Width 8.3 ft - - -
    Overall Tire Width 12.1 ft - - -

    General
    Engine Output - SAE J1995 - 3015 hp - -
    Bucket Payload - 67 ton (US) - -
    Operating Weight - 660 ton (US) - -
    Note - Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. - -

    Diesel Engines
    Rated Speed - 1,800 min-1 (1,800 rpm) - -
    Number of Cylinders - Each Engine - 12 - -
    Bore - 6.69 in - -
    Stroke - 8.46 in - -
    Displacement - 3574 in³ - -
    Aspiration - Turbocharged and charge air-cooled - -
    Components (1) - Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) - -
    Components (2) - High-capacity water separator - -
    Components (3) - Two-stage fuel filter with series filtration - -
    Components (4) - Heavy-duty air filters - -
    Components (5) - Microprocessed engine management - -
    Components (6) - Hydraulically driven radiator fan with electronically controlled fan speed - -
    Components (7) - Exhaust manifold and turbo heat shields - -

    Diesel Engine - Lesser Regulated
    Gross Power - SAE J1995 - 3025 hp - -
    Net Power - ISO 9249 - 2990 hp - -
    Net Power - SAE J1349 - 2821 hp - -
    Emissions - Optimized for fuel consumption. - -

    Diesel Engine - Highly Regulated
    Gross Power - SAE J1995 - 3015 hp - -
    Net Power - SAE J1349 - 2810 hp - -
    Net Power - ISO 9249 - 2979 hp - -
    Emissions - Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. - -

    Electrical System
    System Voltage - 24 V - -
    Batteries in Series/Parallel Installation - 6 x 210 Ah; 12 V each; 630 Ah 24 V in total - -
    Components (1) - 6 maintenance-free batteries - -
    Components (2) - Lockable battery isolator switch - -
    Components (3) - Lockable starter isolator switch - -
    Components (4) - 13 LED high-brightness working flood lights - -
    Components (5) - 17 LED service lights - -
    Components (6) - 2 electric horns (1 cab module; 1 oil cooler module) - -

    Operating Weights
    6060 FS - Standard Track Pads - 4.58 ft - -
    6060 FS - Operating Weight - 1320110 lb - -
    6060 FS - Ground Pressure - 26.6 N/cm2 (38.5 psi) - -
    Backhoe - Standard Track Pads - 4.58 ft - -
    Backhoe - Operating Weight - 1323860 lb - -
    Backhoe - Ground Pressure - 26.7 N/cm2 (38.7 psi) - -
    Note - Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. - -

    Hydraulic System with Pump Managing System
    Main Pumps - Diesel Version - 8 variable swash plate pumps - -
    Main Pumps - Maximum Oil Flow - Diesel Version - 8 x 650 L/min (8 x 172 gal/min) - -
    Maximum Pressure - Attachment - 4640 psi - -
    Maximum Pressure - Travel - 5220 psi - -
    Swing Pumps - Diesel Version - 4 reversible swash plate pumps - -
    Swing Pumps - Maximum Oil Flow - Diesel Version - 4 x 352 L/min (4 x 93 gal/min) - -
    Maximum Pressure - Swing Pumps - 5075 psi - -

    Hydraulic Oil Cooling
    Oil Flow of Cooling Pumps - 4 x 488 L/min (4 x 129 gal/min) - -
    Components - 4 cooling fans - -
    Diameter - Fan - 46 in - -
    Features (1) - Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running - -
    Features (2) - Fan speed and flow of oil to the coolers are thermostatically controlled - -
    Features (3) - Extremely high cooling efficiency to ensure optimum oil temperature - -
    Features (4) - Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers - -

    Swing System
    Swing Drive - 4 compact planetary transmissions with axial piston motors - -
    Parking Brakes - Wet multiple disc brake, spring loaded/hydraulically released - -
    Maximum Swing Speed - 3.8 r/min - -
    Swing Ring - Triple-race roller bearing with sealed internal gearing - -
    Features (1) - Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody - -
    Features (2) - Closed-loop swing circuit with torque control - -
    Features (3) - Hydraulic braking of the swing motion by counteracting control - -
    Features (4) - All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system - -

    Undercarriage
    Travel Speed - 1st Stage - Maximum - 0.68 mile/h - -
    Travel Speed - 2nd Stage - Maximum - 0.99 mile/h - -
    Maximum Tractive Force - 661160 lb - -
    Gradeability - Travel Drives - Maximum - 39 % - -
    Track Pads - Each Side - 42 - -
    Bottom Rollers - Each Side - 7 - -
    Support Rollers - Each Side - 2 plus a skid plate in between - -
    Travel Drives - Each Side - 1 planetary transmission with 2 two-stage axial piston motors - -
    Components (1) - HD tracks with cast double-grouser track pad - -
    Components (2) - HD fixed axle rollers and idlers - -
    Components (3) - Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas - -
    Components (4) - Acoustic travel alarm (forward and reverse) - -
    Components (5) - Fully hydraulic, self-adjusting track tensioning system with piston accumulator - -
    Components (6) - Automatic hydraulic retarder valve to prevent over-speed on downhill travel - -

    Operator's Cab
    Operator's Eye Level - Approximately - 24.91 ft - -
    Internal Dimensions of Cab - Length - 7.33 ft - -
    Internal Dimensions of Cab - Width - 5.33 ft - -
    Internal Dimensions of Cab - Height - 6.75 ft - -
    Components (1) - Single hydraulically driven HVAC System, with dual system option - -
    Components (2) - In-floor window with removable grate - -
    Components (3) - Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support - -
    Components (4) - Independently adjustable seat consoles with integrated joysticks - -
    Components (5) - Operator Protective Guard (Top Guard) (ISO 10262:1998) - -
    Components (6) - Elevated full-size trainer seat with safety belt and laptop desk - -
    Components (7) - Additional fold-away auxiliary seat with safety belt - -
    Components (8) - Operator Presence switch - -
    Components (9) - Monitoring system with 254 mm (10 in) touch screen - -
    Components (10) - Powered 45 degree access stairway - -
    Components (11) - Emergency egress ladder - -
    Components (12) - FM/AM radio with USB and AUX input - -
    Components (13) - Roller blinds on 3 front windows - -
    Components (14) - 3 cup holders - -
    Components (15) - Cat Electronic Technician service port - -

    Automatic Lubrication System
    Capacity - Grease Container - 188 gal (US) - -
    Type (1) - Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times - -
    Type (2) - System failures displayed by monitoring system - -
    Type (3) - Grease filters (200 µm) between service station and container as well as directly behind grease pump - -
    Type (4) - Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring - -

    Attachments
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) - Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces - -
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) - Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance - -
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) - Constant boom momentum throughout the entire lift arc; Crowd force assistance - -
    All buckets (FS and BH) are equipped with a wear package consisting of: (1) - Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth - -
    All buckets (FS and BH) are equipped with a wear package consisting of: (2) - Wing shrouds on side walls and heel shrouds at bottom edges - -
    Type (1) - Catwalks with rails at booms (FS and BH) - -
    Type (2) - Guards for shovel cylinders (FS) - -
    Type (3) - Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve - -
    Type (4) - Service access holes from both sides of boom (FS and BH) and stick (FS) - -
    Type (5) - Welding procedures allow for internal counter-welding (double prep weld) wherever possible - -
    Type (6) - Booms and sticks are stress-relieved after welding - -
    Type (7) - Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas - -
    Type (8) - Special wear packages for highly abrasive materials available upon request - -

    Digging Forces
    Maximum Crowd Force - 494410 lb - -
    Maximum Breakout Force - 388780 lb - -

    Working Ranges
    Maximum Digging Height - 51.17 ft - -
    Maximum Digging Reach - 54.17 ft - -
    Maximum Digging Depth - 9.17 ft - -

    Standard Bucket Capacity
    Face Shovel (heaped 2:1) - 44.5 yd³ - -
    Backhoe (heaped 1:1) - 44.5 yd³ - -

    Backhoe Attachment (BH) - Digging Forces
    Stick Digging Force - ISO - 295740 lb - -
    Bucket Digging Force - ISO - 274840 lb - -

    Backhoe Attachment (BH) - Working Range
    Maximum Digging Height - 52.83 ft - -
    Maximum Digging Reach - 62.33 ft - -
    Maximum Digging Depth - 29.17 ft - -

    Retractable Service Station
    Installation - Retractable service station installed underneath the engine module and easily accessible from ground. - -
    Equipped With (1) - Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container - -
    Equipped With (2) - Cat jump-start socket - -
    Equipped With (3) - Indicator lights - -

    Weights
    LRC Bare Chassis Weight without Hoist - - 58414 lb -
    LRC Bare Chassis Weight with Hoist - - 59223 lb -
    LRC Gross Vehicle Weight (Target) with Hoist - - 180999 lb -
    LRC Gross Vehicle Weight (Target) without Hoist - - 180999 lb -
    HRC Bare Chassis Weight without Hoist - - 59567 lb -
    HRC Bare Chassis Weight with Hoist - - 60376 lb -
    HRC Gross Vehicle Weight (Target) with Hoist - - 180999 lb -
    HRC Gross Vehicle Weight (Target) without Hoist - - 180999 lb -
    Note - - LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. -

    Braking System
    Service Brakes - - - Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area - - - 9487 in²
    Rear - Wet Disc Brake Surface Area - - - 13908 in²
    Standards - - - Service and Secondary: ISO 3450:2011
    Parking Brake - - - Four corner, multi disc, spring applied, hydraulically released

    Capacity - MSD II - 100% Fill Factor
    Struck - - - 72 m^3 / 94 yd^3
    Heaped (SAE 2:1) - - - 99 m^3 / 129 yd^3
    Note - - - Consult your local Cat dealer for body recommendations.

    Cab
    Air Conditioning - - - HFC - 134A refrigerant: 24,500 Btu/h
    Heater / Defroster - - - 33300 Btu/h
    ROPS Standards (1) - - - ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards - - - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - - - 17.09 ft
    Overall Body Length - - - 39.32 ft
    Inside Body Length - - - 27.29 ft
    Overall Length - - - 39.23 ft
    Wheel Base - - - 17 ft
    Rear Axle - Tail - - - 12.56 ft
    Ground Clearance - - - 3.29 ft
    Dump Clearance - - - 3.7 ft
    Loading Height - Empty - - - 17.39 ft
    Inside Body Depth - Maximum - - - 9.15 ft
    Overall Height - Body Raised - - - 39.48 ft
    Operating Width - - - 24.72 ft
    Centerline Front Tire Width - - - 15.91 ft
    Engine Guard Clearance - - - 3.41 ft
    Overall Canopy Width - - - 24.81 ft
    Outside Body Width - - - 22 ft
    Inside Body Width - - - 19.72 ft
    Front Canopy Height - - - 19.8 ft
    Rear Axle - Clearance - - - 3.25 ft
    Centerline of Rear Dual Tire Width - - - 14.06 ft
    Overall Tire Width - - - 20.59 ft
    Add a Similar Product:
    • 775G Off-Highway Truck Bare Chassis Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 797F Mining Truck Add
    • 798 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add