Compare Equipment Go Back
988 XE Wheel Loader |
988 Wheel Loader |
|
|
Engine |
|||
---|---|---|---|
Engine Power - ISO 14396:2002 | 580 hp | 580 hp | - |
Engine Model | Cat® C18 | Cat® C18 | - |
Rated Speed | 1,700 rpm | 1700/rpm | - |
Peak Power Speed | 1,500 rpm | 1500/rpm | - |
Gross Power - SAE J1995:2014 | 588 hp | 588 hp | - |
Net Power - SAE J1349:2011 | 538 hp | 538 hp | - |
Bore | 5.7 in | 5.7 in | - |
Stroke | 7.2 in | 7.2 in | - |
Displacement | 1105 in³ | 1105 in³ | - |
Peak Torque - 1,200 rpm | 2230 lbf·ft | 2104 lbf·ft | - |
Torque Rise | 58% | 58 % | - |
Note (1) | Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. | Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio | - |
Note (2) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | - |
Operating Specifications |
|||
Operating Weight | 116362 lb | 112574 lb | - |
Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | 4.7-13 m3 (6.2-17 yd3) | - |
Rated Payload - Quarry Face | 12.5 t | 12.5 t | - |
Rated Payload - Loose Material | 16 t | 16 t | - |
Cat Truck Match - Standard | - | 770 - 772 | - |
Cat Truck Match - High Lift | - | 773 - 775 | - |
Transmission |
|||
Transmission Type | Cat switched reluctance electric drive | Cat planetary powershift | - |
Forward 1 (virtual) | 4.3 mile/h | - | - |
Forward 2 (virtual) | 7 mile/h | - | - |
Forward 3 (virtual) | 13.8 mile/h | - | - |
Forward 4 (virtual) | 20 mile/h | - | - |
Reverse 1 (virtual) | 4.3 mile/h | - | - |
Reverse 2 (virtual) | 7 mile/h | - | - |
Reverse 3 (virtual) | 17.5 mile/h | - | - |
Forward - 1 | - | 4 mile/h | - |
Forward - 2 | - | 7.2 mile/h | - |
Forward - 3 | - | 12.7 mile/h | - |
Forward - 4 | - | 21.6 mile/h | - |
Reverse - 1 | - | 4.7 mile/h | - |
Reverse - 2 | - | 8.3 mile/h | - |
Reverse - 3 | - | 14.4 mile/h | - |
Direct Drive - Forward 1 | - | Lock-up disabled | - |
Direct Drive - Forward 2 | - | 7.8 mile/h | - |
Direct Drive - Forward 3 | - | 13.9 mile/h | - |
Direct Drive - Forward 4 | - | 24.4 mile/h | - |
Direct Drive - Reverse 1 | - | 5 mile/h | - |
Direct Drive - Reverse 2 | - | 8.9 mile/h | - |
Direct Drive - Reverse 3 | - | 15.8 mile/h | - |
Hydraulic System - Lift/Tilt |
|||
Lift/Tilt System - Circuit | EH-Positive Flow Control, Flow Sharing | EH- Positive Flow Control, Flow Sharing | - |
Lift/Tilt System - Pump | Variable displacement piston | Variable displacement piston | - |
Maximum Flow at 1,400-1,600 rpm | 153 gal/min | - | - |
Relief Valve Setting - Lift/Tilt | 4757 psi | 4757 psi | - |
Lift Cylinder - Bore | 8.7 in | - | - |
Lift Cylinder - Stroke | 41.3 in | - | - |
Tilt Cylinder - Bore | 8.7 in | - | - |
Tilt Cylinder - Stroke | 27 in | - | - |
Maximum Flow at 1,400-1,860 rpm | - | 153 gal/min | - |
Cylinders, Double Acting - Lift, Bore and Stroke | - | 210 mm × 1050 mm (8.7 in × 41.3 in) | - |
Cylinders, Double Acting - Tilt, Bore and Stroke | - | 266 mm × 685 mm (8.7 in × 27 in) | - |
Pilot System | - | Variable displacement piston | - |
Relief Valve Setting - Main | - | 551 psi | - |
Hydraulic Cycle Times |
|||
Rack Back | 4.5 s | - | - |
Raise | 8 s | - | - |
Dump | 2.2 s | - | - |
Lower Float Down | 3.5 s | - | - |
Total Hydraulic Cycle Time | 18.2 s | - | - |
Hydraulic System - Steering |
|||
Steering System - Circuit | Pilot, load sensing | Pilot, load sensing | - |
Steering System - Pump | Piston, variable displacement | Piston, variable displacement | - |
Maximum Flow at 1,400-1,600 rpm | 71.3 gal/min | 71.3 gal/min | - |
Steering Cut Off Pressure | 4351 psi | - | - |
Total Steering Angle | 86° | 86 ° | - |
Steering Cycle Times - High Idle | 3.4 s | 3.4 s | - |
Steering Cycle Times - Low Idle | 5.6 s | 5.6 s | - |
Relief Valve Setting - Steering | - | 4351 psi | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con | • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system | - |
Axles |
|||
Front | Fixed | Fixed | - |
Rear | Trunnion | Trunnion | - |
Oscillation Angle | 13° | 13 ° | - |
Brakes |
|||
Brakes | ISO 3450:2011 | ISO 3450:2011 | - |
Operator's Cab |
|||
ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - |
Sound Performance - Tier 4 Final / Stage V |
|||
Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | 73 dB(A) | - |
Machine Sound Power Level (ISO 6395:2008) | 109 dB(A) | 111 dB(A) | - |
Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) | - |
Machine Sound Power Level (ISO 6395:2008)** | 109 dB(A) | 109 dB(A) | - |
Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - |
Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - |
Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - |
Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - |
Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
Sound Performance - Tier 3 / Stage IIIA |
|||
Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | 73 dB(A) | - |
Machine Sound Power Level (ISO 6395:2008) | 110 dB(A) | 112 dB(A) | - |
Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | 72 dB(A) | - |
Machine Sound Power Level (ISO 6395:2008)** | 110 dB(A) | 110 dB(A) | - |
Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” | - |
Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. | - |
Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - |
Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - |
Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
Service Refill Capacities |
|||
Fuel Tank | 147 gal (US) | 188 gal (US) | - |
Cooling System - Jacket Water | 30 gal (US) | - | - |
Cooling Systems - Power Train | 8 gal (US) | - | - |
Engine Crankcase | 16 gal (US) | - | - |
Diesel Exhaust Fluid Tank | 8.7 gal (US) | - | - |
Transmission | 16 gal (US) | 24.3 gal (US) | - |
Differential - Final Drives - Front | 49 gal (US) | 49.1 gal (US) | - |
Differential - Final Drives - Rear | 49 gal (US) | 49.1 gal (US) | - |
Hydraulic System - Implement/Steering | 126 gal (US) | - | - |
Note | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20% | • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester | - |
Cooling System | - | 31.7 gal (US) | - |
Coolant (Validated by Test Cell Fill Quantities) | - | 33 gal (US) | - |
Crankcase | - | 15.9 gal (US) | - |
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) | - | 8.7 gal (US) | - |
Transmission - Validated by Test Cell Fill Quantities | - | 29 gal (US) | - |
Hydraulic System Factory Fill | - | 125.5 gal (US) | - |
Hydraulic System - Tank Only | - | 63.4 gal (US) | - |
Dimensions (Approximate) - Standard Lift |
|||
Ground to Top of ROPS | 13.8 ft | - | - |
Ground to Top of Exhaust Stacks | 14.8 ft | - | - |
Ground to Top of Hood | 10.9 ft | - | - |
Ground to Bumper Clearance | 3.1 ft | - | - |
Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
Front Axle Centerline to Bucket Tip | 14 ft | - | - |
Wheel Base | 14.9 ft | - | - |
Maximum Overall Length | 39.3 ft | - | - |
Ground to Lower Hitch Clearance | 1.9 ft | - | - |
Ground to Center of Axles | 3.2 ft | - | - |
Clearance at Maximum Lift | 11.9 ft | - | - |
B-Pin Height - Maximum Lift | 18 ft | - | - |
Maximum Overall Height - Bucket Raised | 24.5 ft | - | - |
Reach - Maximum Lift | 6.5 ft | - | - |
Note | Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. | - | - |
Dimensions (Approximate) - High Lift |
|||
Ground to Top of ROPS | 13.8 ft | - | - |
Ground to Top of Exhaust Stacks | 14.8 ft | - | - |
Ground to Top of Hood | 10.9 ft | - | - |
Ground to Bumper Clearance | 3.1 ft | - | - |
Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
Front Axle Centerline to Bucket Tip | 15.3 ft | - | - |
Wheel Base | 14.9 ft | - | - |
Maximum Overall Length | 40.7 ft | - | - |
Ground to Lower Hitch Clearance | 1.9 ft | - | - |
Ground to Center of Axles | 3.2 ft | - | - |
Clearance at Maximum Lift | 13.3 ft | - | - |
B-Pin Height - Maximum Lift | 19.3 ft | - | - |
Maximum Overall Height - Bucket Raised | 25.8 ft | - | - |
Reach - Maximum Lift | 6.8 ft | - | - |
Note | Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. | - | - |
Dimensions - Millyard Linkage |
|||
Ground to Top of ROPS | 13.8 ft | - | - |
Ground to Top of Exhaust Stacks | 13.8 ft | - | - |
Ground to Top of Hood | 10.9 ft | - | - |
Ground to Bumper Clearance | 3.1 ft | - | - |
Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
Front Axle Centerline to Fork Tip | 16.5 ft | - | - |
Wheel Base | 14.9 ft | - | - |
Maximum Overall Length | 41.9 ft | - | - |
Ground to Lower Hitch Clearance | 1.9 ft | - | - |
Ground to Center of Front Axle | 3.2 ft | - | - |
Fork Height with Level Arms | 8.1 ft | - | - |
Fork Top Clamp Opening | 13.1 ft | - | - |
Fork Height at Maximum Lift | 17.2 ft | - | - |
Hinge Pin Height at Maximum Lift | 16.1 ft | - | - |
Dump Angle at Maximum Lift | -39.4 ° | - | - |
Hydraulic Cycle Time (1,400-1,860 rpm) |
|||
Rack Back | - | 4.5 s | - |
Raise | - | 8 s | - |
Dump | - | 2.2 s | - |
Lower Float Down | - | 3.5 s | - |
Total Hydraulic Cycle Time - Empty Bucket | - | 18.2 s | - |
Dimensions (Approximate) - Standard Lift Linkage |
|||
Ground to Top of ROPS | - | 13.8 ft | - |
Ground to Top of Exhaust Stacks | - | 14.8 ft | - |
Ground to Top of Hood | - | 10.9 ft | - |
Rear Axle - Centerline to Bumper | - | 10.5 ft | - |
Front Axle Centerline to Bucket Tip | - | 14 ft | - |
Wheel Base | - | 14.9 ft | - |
Maximum Overall Length | - | 39.3 ft | - |
Ground to Lower Hitch Clearance | - | 1.9 ft | - |
Clearance at Maximum Lift | - | 11.9 ft | - |
B-Pin Height - Maximum Lift | - | 18 ft | - |
Maximum Overall Height - Bucket Raised | - | 24.5 ft | - |
Reach - Maximum Lift | - | 6.5 ft | - |
Dimensions (Approximate) - High Lift Linkage |
|||
Ground to Top of ROPS | - | 13.8 ft | - |
Ground to Top of Exhaust Stacks | - | 14.8 ft | - |
Ground to Top of Hood | - | 10.9 ft | - |
Rear Axle - Centerline to Bumper | - | 10.5 ft | - |
Front Axle Centerline to Bucket Tip | - | 15.3 ft | - |
Wheel Base | - | 14.9 ft | - |
Maximum Overall Length | - | 40.7 ft | - |
Ground to Lower Hitch Clearance | - | 1.9 ft | - |
Clearance at Maximum Lift | - | 13.3 ft | - |
B-Pin Height - Maximum Lift | - | 19.3 ft | - |
Maximum Overall Height - Bucket Raised | - | 25.8 ft | - |
Reach - Maximum Lift | - | 6.8 ft | - |
Add a Similar Product:
-
995 Wheel Loader Add
-
992 Wheel Loader Add
-
988 GC Wheel Loader Add
-
990 Wheel Loader Add
-
986 Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
930M Waste Handler Small Wheel Loader Add
-
938M Small Wheel Loader Add