Compare

Compare Equipment Go Back

Engine
	988 XE Wheel Loader View Product	992 Wheel Loader View Product Remove	990 Wheel Loader View Product Remove	986 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	752 hp	449 hp	-
Engine Model	Cat® C18	Cat® C32B	Cat® C27	Cat® C15	Cat C3.6
Rated Speed	1,700 rpm	1750 rpm	1800 r/min	2000	-
Peak Power Speed	1,500 rpm	-	-	1600	-
Gross Power - SAE J1995:2014	588 hp	-	766 hp	456 hp	-
Net Power - SAE J1349:2011	538 hp	-	-	373 hp	-
Bore	5.7 in	5.7 in	5.4 in	5.4 in	3.85 in
Stroke	7.2 in	6.4 in	6 in	6.75 in	4.72 in
Displacement	1105 in³	1963.5 in³	1649.5 in³	927 in²	220 in³
Peak Torque - 1,200 rpm	2230 lbf·ft	-	2624 lb/ft	-	-
Torque Rise	58%	-	18 %	16%	-
Note (1)	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-
Net Power	-	814 hp	-	-	-
Emissions	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	Option 2 - Emits equivalent to U.S. EPA Tier 2	-	Engine meets Tier 4 Final/Stage V emission standards.
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	900 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	937 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	907 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	944 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	884 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	921 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	893 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	931 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	823 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	823 hp	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	3514 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	3555 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	3537 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	3570 ft·lbf	-	-	-
Net Power - SAE J1349:2011 - Standard Ambient	-	-	699 hp	-	-
Net Power - SAE J1349:2011 - High Ambient	-	-	648 hp	-	-
Note	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	373 hp	-
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	373 hp	-
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	1778 lb/ft	-
Maximum Gross Power	-	-	-	-	121 hp
Rated Net Power - Rated Engine Speed	-	-	-	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	-	-	-	2200 r/min
Rated Net Power - SAE J1349	-	-	-	-	120 hp
Maximum Gross Power - ISO 14396 (metric)	-	-	-	-	122 hp
Rated Net Power - ISO 9249	-	-	-	-	118 hp
Maximum Gross Torque - SAE J1995	-	-	-	-	372 ft·lbf
Maximum Gross Torque - ISO 14396	-	-	-	-	369 ft·lbf
Maximum Net Torque - SAE J1349	-	-	-	-	366 ft·lbf
Maximum Net Torque - ISO 9249	-	-	-	-	363 ft·lbf
Maximum Gross Power - ISO 14396	-	-	-	-	121 hp
Operating Specifications
Operating Weight	116362 lb	233430 lb	-	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	11.5-24.5 m³ (15-32 yd³)	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	5.0-10.3 m³ (6.5-13.5 yd³)	-
Rated Payload - Quarry Face	12.5 t	-	-	-	-
Rated Payload - Loose Material	16 t	-	-	-	-
Rated Payload - Standard	-	25.5 ton (US)	17.5 ton (US)	-	-
Rated Payload - Standard (Material Handler)	-	30 ton (US)	-	-	-
Rated Payload - High Lift	-	22.5 ton (US)	17.5 ton (US)	-	-
Rated Payload - High Lift (Material Handler)	-	27 ton (US)	-	-	-
Cat Truck Match - Standard	-	775/777	773-775	770/735/740/745	-
Cat Truck Match - High Lift	-	785	775-777	772/773	-
Operating Weight - Standard	-	-	178517 lb	97785 lb	-
Operating Weight - High Lift	-	-	-	104005 lb	-
Rated Payload - Standard (Quarry Face)	-	-	-	11 ton (US)	-
Rated Payload - Loose Material (Standard)	-	-	-	14 ton (US)	-
Rated Payload - High Lift (Quarry Face)	-	-	-	11 ton (US)	-
Rated Payload - Loose Material (High Lift)	-	-	-	12.1 ton (US)	-
Transmission
Transmission Type	Cat switched reluctance electric drive	Cat Planetary Powershift	Cat planetary power shift	Cat planetary power shift	-
Forward 1 (virtual)	4.3 mile/h	-	-	-	-
Forward 2 (virtual)	7 mile/h	-	-	-	-
Forward 3 (virtual)	13.8 mile/h	-	-	-	-
Forward 4 (virtual)	20 mile/h	-	-	-	-
Reverse 1 (virtual)	4.3 mile/h	-	-	-	-
Reverse 2 (virtual)	7 mile/h	-	-	-	-
Reverse 3 (virtual)	17.5 mile/h	-	-	-	-
Forward - 1	-	4.3 mile/h	4.6 mile/h	5 mile/h	-
Forward - 2	-	7.4 mile/h	8.2 mile/h	8 mile/h	-
Forward - 3	-	12.7 mile/h	14.5 mile/h	-	-
Direct Drive - Forward 1	-	Disabled	Lock-up disabled	-	-
Direct Drive - Forward 2	-	8 mile/h	8.2 mile/h	8 mile/h	-
Direct Drive - Forward 3	-	14 mile/h	14.5 mile/h	14 mile/h	-
Reverse - 1	-	4.7 mile/h	5.1 mile/h	5 mile/h	-
Reverse - 2	-	8.1 mile/h	9.1 mile/h	8 mile/h	-
Reverse - 3	-	13.9 mile/h	16 mile/h	-	-
Direct Drive - Reverse 1	-	5 mile/h	5.1 mile/h	-	-
Direct Drive - Reverse 2	-	8.8 mile/h	9.1 mile/h	9 mile/h	-
Direct Drive - Reverse 3	-	15.3 mile/h	16 mile/h	16 mile/h	-
Note	-	-	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Direct Drive - Forward 4	-	-	-	24 mile/h	-
Direct Drive - Reverse 4	-	-	-	25.4 mile/h	-
Forward and Reverse - Speed Range 3	-	-	-	-	25 mile/h
Forward and Reverse - Speed Range 2*	-	-	-	-	12.5 mile/h
Forward and Reverse - Speed Range 1*	-	-	-	-	6.3 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH-Positive Flow Control, Flow Sharing	Positive Flow Control	Positive flow control	Load Sense	-
Lift/Tilt System - Pump	Variable displacement piston	Variable Displacement Piston	-	2 × 110 cc variable displacement	-
Maximum Flow at 1,400-1,600 rpm	153 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	5000 psi	4786 psi	4050 psi	-
Lift Cylinder - Bore	8.7 in	9.3 in	-	7.5 in	-
Lift Cylinder - Stroke	41.3 in	63.5 in	-	45 in	-
Tilt Cylinder - Bore	8.7 in	11.5 in	-	6.7 in	-
Tilt Cylinder - Stroke	27 in	41.5 in	-	28.4 in	-
Maximum Flow at 2,165 rpm	-	250 gpm	-	123 gpm	-
Lift/Tilt System	-	-	Variable displacement piston	-	-
Maximum Flow at 1,800 rpm	-	-	240 gpm	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	235 mm × 1287 mm (9.3 in × 50.7 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	292.1 mm × 820 mm (11.5 in × 32.3 in)	-	-
Pilot System	-	-	Open loop and pressure reducing	-	-
Pilot Relief Setting	-	-	507 psi	-	-
Hydraulic Cycle Times
Rack Back	4.5 s	2.3 s	4.3 s	4.5 s	-
Raise	8 s	9 s	8.6 s	9 s	-
Dump	2.2 s	2.6 s	2.9 s	3.5 s	-
Lower Float Down	3.5 s	-	3.7 s	4.3 s	-
Total Hydraulic Cycle Time	18.2 s	17.1 s	-	21.3 s	-
Rack Back - High Lift	-	2.3 s	-	-	-
Raise - High Lift	-	9 s	-	-	-
Dump - High Lift	-	2.6 s	-	-	-
Float Down	-	3.2 s	-	-	-
Float Down - High Lift	-	3.2 s	-	-	-
Lower	-	-	3.7 s	5.2 s	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	13.8 s	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	Pilot, load sensing	Load Sense	-
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	Piston, variable displacement	Piston, variable displacement	-
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-	-
Steering Cut Off Pressure	4351 psi	4500 psi	-	4000 psi	-
Total Steering Angle	86°	80°	70°	70°	-
Steering Cycle Times - High Idle	3.4 s	3.1 s	-	-	-
Steering Cycle Times - Low Idle	5.6 s	4.9 s	-	-	-
Maximum Flow at 1,400-1,850 rpm	-	70 gpm	-	-	-
Maximum Flow at 1,400 rpm	-	-	96.2 gpm	52 gpm	-
Relief Valve Setting - Steering	-	-	5004 psi	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-
Axles
Front	Fixed	Fixed	Fixed	Fixed	Fixed; Locking differential (standard)
Rear	Trunnion	Trunnion	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)
Oscillation Angle	13°	±9°	8.5°	±12.5°	-
Oscillation Angle - Chain Arrangement	-	-	-	±8.5°	-
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	ISO 3450: 2011	ISO 3450:2011	-
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	72 dB(A)	73 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	109 dB(A)	-	116 dB(A)	113 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	110 dB(A)	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	*Sound suppression equipped	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	114 dB(A)	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	74 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	110 dB(A)	-	-	113 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	73 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Service Refill Capacities
Fuel Tank	147 gal (US)	385.7 gal (US)	281 gal (US)	141 gal (US)	43.6 gal (US)
Cooling System - Jacket Water	30 gal (US)	-	-	-	-
Cooling Systems - Power Train	8 gal (US)	-	-	-	-
Engine Crankcase	16 gal (US)	-	20 gal (US)	-	2.6 gal (US)
Diesel Exhaust Fluid Tank	8.7 gal (US)	-	-	6 gal (US)	-
Transmission	16 gal (US)	51.5 gal (US)	29.1 gal (US)	20 gal (US)	0.8 gal (US)
Differential - Final Drives - Front	49 gal (US)	96.4 gal (US)	71.6 gal (US)	-	-
Differential - Final Drives - Rear	49 gal (US)	96.4 gal (US)	68.9 gal (US)	-	-
Hydraulic System - Implement/Steering	126 gal (US)	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	-	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cooling Systems	-	59.4 gal (US)	-	26 gal (US)	-
Crankcase	-	31.7 gal (US)	-	9 gal (US)	-
Hydraulic System Factory Fill (Implement)	-	104.1 gal (US)	-	-	-
Hydraulic Tank - Implement	-	60.2 gal (US)	-	-	-
Hydraulic Factory Fill (Steering)	-	32.5 gal (US)	-	-	-
Hydraulic Tank (Steering Tank Only)	-	26.3 gal (US)	-	-	-
Cooling System	-	-	54.9 gal (US)	-	5.7 gal (US)
Hydraulic System Factory Fill	-	-	210 gal (US)	87 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	68.9 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	-	34.9 gal (US)	-	-
Fuel Tank - Short Lift	-	-	-	127 gal (US)	-
Axle Oil - Differentials and Final Drives - Front	-	-	-	49 gal (US)	-
Axle Oil - Differentials and Final Drives - Rear	-	-	-	45 gal (US)	-
Hydraulic System - Tank Only	-	-	-	34 gal (US)	-
Axles - Rear	-	-	-	-	4.5 gal (US)
Hydraulic System - Including Tank	-	-	-	-	25.9 gal (US)
Hydraulic Tank	-	-	-	-	14.5 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	-	-	4.8 gal (US)
Axles - Front	-	-	-	-	4.5 gal (US)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	39.3 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	40.7 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	13.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Fork Tip	16.5 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	41.9 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-	-
Fork Height with Level Arms	8.1 ft	-	-	-	-
Fork Top Clamp Opening	13.1 ft	-	-	-	-
Fork Height at Maximum Lift	17.2 ft	-	-	-	-
Hinge Pin Height at Maximum Lift	16.1 ft	-	-	-	-
Dump Angle at Maximum Lift	-39.4 °	-	-	-	-
Buckets
Bucket Capacities	-	11.5-24.5 m³ (15-32 yd³)	-	-	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	-	-	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	-	-	-	2.5-3.5 m³ (3.3-4.6 yd³)
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	131 °F	-	-	-
Sound Performance - Standard
Note	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-	-
Sound Performance - Suppression
Note	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	17 ft	-	-	-
Ground to Top of ROPS	-	18.3 ft	-	-	-
Ground to Top of Hood	-	13.1 ft	-	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	3.8 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	-	-	-
Reach - Maximum Lift	-	8.2 ft	-	-	-
Clearance at Maximum Lift	-	15.2 ft	-	-	-
B-Pin Height - Maximum Lift	-	22.8 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	30.8 ft	-	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-	-	-
Tread Width	-	10.83 ft	-	-	-
Rack Back Angle - Maximum Lift	-	56.9 degrees	-	-	-
Dump Angle at Maximum Lift	-	-49.5 degrees	-	-	-
Rack Back Angle - Ground Level	-	40.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	14.74 ft	-	-	-
Rack Back Angle - Carry	-	48.9 degrees	-	-	-
Wheel Base	-	19.3 ft	-	-	-
Maximum Overall Length	-	50.8 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	18 ft	-	-	-
Dimensions - High Lift - Approximate
Tread Width	-	10.83 ft	-	-	-
Rack Back Angle - Ground Level	-	42.5 degrees	-	-	-
Dump Angle at Maximum Lift	-	-48.1 degrees	-	-	-
Rack Back Angle - Maximum Lift	-	56.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	14.75 ft	-	-	-
Rack Back Angle - Carry	-	51.6 degrees	-	-	-
Ground to Top of Exhaust Stacks	-	17 ft	-	-	-
Ground to Top of ROPS	-	18.3 ft	-	-	-
Ground to Top of Hood	-	13.1 ft	-	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	3.8 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	-	-	-
Reach - Maximum Lift	-	7.6 ft	-	-	-
Clearance at Maximum Lift	-	17.2 ft	-	-	-
B-Pin Height - Maximum Lift	-	24.5 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	32 ft	-	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-	-	-
Wheel Base	-	19.3 ft	-	-	-
Maximum Overall Length	-	51.6 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	18.8 ft	-	-	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	-	-	116 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	114 dB(A)	-	-
Note (1)	-	-	*Sound suppression equipped	-	-
Note (2)	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-
Note (3)	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-
Note (4)	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	17.2 ft	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	16.6 ft	13.3 ft	-
Ground to Top of Hood	-	-	12.7 ft	10.7 ft	-
Ground to Bumper Clearance	-	-	3.5 ft	-	-
Rear Axle - Centerline to Bumper	-	-	12.5 ft	10.3 ft	-
Front Axle Centerline to Bucket Tip	-	-	15.4 ft	13.8 ft	-
Wheel Base	-	-	15.1 ft	12.5 ft	-
Maximum Overall Length	-	-	42.9 ft	36.6 ft	-
Ground to Lower Hitch Clearance	-	-	2 ft	1.5 ft	-
Ground to Center of Front Axle	-	-	4.2 ft	3.2 ft	-
Clearance at Maximum Lift	-	-	7.2 ft	10.1 ft	-
Rack Back Angle at Ground Level	-	-	40.4°	-	-
Rack Back Angle at Carry	-	-	48.8°	-	-
B-Pin Height - Maximum Lift	-	-	19.7 ft	16.1 ft	-
Maximum Overall Height - Bucket Raised	-	-	27.2 ft	22.4 ft	-
Rack Angle at Maximum Lift	-	-	63.7°	-	-
Dump Angle at Maximum Lift	-	-	45°	-	-
Reach - Maximum Lift	-	-	7.2 ft	7.1 ft	-
Note	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	17.2 ft	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	16.6 ft	13.3 ft	-
Ground to Top of Hood	-	-	12.7 ft	10.7 ft	-
Ground to Bumper Clearance	-	-	3.5 ft	-	-
Rear Axle - Centerline to Bumper	-	-	12.5 ft	10.3 ft	-
Front Axle Centerline to Bucket Tip	-	-	17.8 ft	15.3 ft	-
Wheel Base	-	-	15.1 ft	12.5 ft	-
Maximum Overall Length	-	-	45.3 ft	38 ft	-
Ground to Lower Hitch Clearance	-	-	2 ft	1.5 ft	-
Ground to Center of Front Axle	-	-	4.2 ft	3.2 ft	-
Clearance at Maximum Lift	-	-	14.8 ft	11.6 ft	-
Rack Back Angle at Ground Level	-	-	39.9°	-	-
Rack Back Angle at Carry	-	-	49.3°	-	-
B-Pin Height - Maximum Lift	-	-	21.2 ft	17.6 ft	-
Maximum Overall Height - Bucket Raised	-	-	28.7 ft	23.9 ft	-
Rack Angle at Maximum Lift	-	-	60.6°	-	-
Dump Angle at Maximum Lift	-	-	51°	-	-
Reach - Maximum Lift	-	-	8.5 ft	7.4 ft	-
Note	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
Reach at Maximum Lift	-	-	-	8 ft	-
Clearance at Maximum Lift	-	-	-	10.7 ft	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-
Maximum Overall Height, Bucket Raised	-	-	-	20.9 ft	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	35 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	12.2 ft	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	35.4 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	12.6 ft	-
Weights
Operating Weight	-	-	-	-	21742 lb
Sustainability
Recyclability	-	-	-	-	95%
Cab
ROPS	-	-	-	-	ISO 3471:2008
FOPS	-	-	-	-	ISO 3449:2005
Note (3)	-	-	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)	-	-	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)	-	-	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)	-	-	-	-	*The measurements were conducted with the cab doors and windows closed.
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	-	-	43.6 gpm
Relief Pressure - Tilt Cylinder	-	-	-	-	4641 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	-	25 gpm
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	-	4641 psi
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	-	-	2.7 s
Note	-	-	-	-	All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure - Implement Pump	-	-	-	-	4061 psi
Hydraulic Cycle Time - Total Cycle Time	-	-	-	-	11.5 s
Hydraulic Cycle Time - Rackback	-	-	-	-	2.2 s
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	-	-	1.8 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	-	-	4.8 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	-	40 gpm
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	-	25 gpm
Steering
Maximum Working Pressure - Steering Pump	-	-	-	-	3190 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	-	-	2.3 s
Steering Articulation Angle - Each Direction	-	-	-	-	40 °
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	-	-	3.4 turns
Maximum Flow - Steering Pump	-	-	-	-	21.7 gpm
Tires
Other Choices Include	-	-	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size	-	-	-	-	17.5 R25 L2 XTLA
Note (1)	-	-	-	-	Other tire choices are available. Contact your Cat dealer for details.
Note (3)	-	-	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	-	-	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Compare Equipment Go Back

988 XE Wheel Loader

992 Wheel Loader

990 Wheel Loader

986 Wheel Loader

920 Compact Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Buckets

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Weights

Sustainability

Cab

Loader Hydraulic System

Steering

Tires