Compare Equipment Go Back
988 XE Wheel Loader |
938M Aggregate Handler Small Wheel Loader |
|
|
Engine |
|||
---|---|---|---|
Engine Power - ISO 14396:2002 | 580 hp | - | - |
Engine Model | Cat® C18 | Cat® C7.1 | - |
Rated Speed | 1,700 rpm | - | - |
Peak Power Speed | 1,500 rpm | - | - |
Gross Power - SAE J1995:2014 | 588 hp | - | - |
Net Power - SAE J1349:2011 | 538 hp | - | - |
Bore | 5.7 in | 4 in | - |
Stroke | 7.2 in | 5 in | - |
Displacement | 1105 in³ | 427 in³ | - |
Peak Torque - 1,200 rpm | 2230 lbf·ft | - | - |
Torque Rise | 58% | - | - |
Note (1) | Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - |
Note (2) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - |
Maximum Gross Power | - | 188 hp | - |
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | - | 188 hp | - |
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | - | 1800 r/min | - |
Maximum Rated Gross Power - ISO 14396 | - | 188 hp | - |
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | - | 1600 r/min | - |
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | - | 649 ft·lbf | - |
Note (3) | - | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | - |
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | - | 173 hp | - |
Emissions | - | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | - |
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | - | 627 ft·lbf | - |
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | - | 650 ft·lbf | - |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | 186 hp | - |
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | 184 hp | - |
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | - | 190 hp | - |
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | - | 183 hp | - |
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | 170 hp | - |
Net Power (Standard Power Mode: Range 1-3*) | - | 1600 r/min | - |
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | - | 176 hp | - |
Net Power (Performance Power Mode: Range 1-4) | - | 1800 r/min | - |
Maximum Rated Gross Power - ISO 14396 (metric) | - | 190 hp | - |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | 172 hp | - |
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | - | 628 ft·lbf | - |
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | - | 170 hp | - |
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | - | 664 ft·lbf | - |
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | - | 642 ft·lbf | - |
Operating Specifications |
|||
Operating Weight | 116362 lb | - | - |
Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) | - | - |
Rated Payload - Quarry Face | 12.5 t | - | - |
Rated Payload - Loose Material | 16 t | - | - |
Full Turn Tip Load (2) | - | 10 662 kg (23,504 lb)^ | - |
Full Turn Tip Load (1) | - | 10 551 kg (23,260 lb)** | - |
Note (2) | - | ^Aggregate Handler equipped with full counterweight, optional guards, roading fenders, cold start package, and 23.5R25 tires. | - |
Note (1) | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | - |
Transmission |
|||
Transmission Type | Cat switched reluctance electric drive | - | - |
Forward 1 (virtual) | 4.3 mile/h | - | - |
Forward 2 (virtual) | 7 mile/h | - | - |
Forward 3 (virtual) | 13.8 mile/h | - | - |
Forward 4 (virtual) | 20 mile/h | - | - |
Reverse 1 (virtual) | 4.3 mile/h | - | - |
Reverse 2 (virtual) | 7 mile/h | - | - |
Reverse 3 (virtual) | 17.5 mile/h | - | - |
Forward and Reverse - Range 4 | - | 25 mile/h | - |
Note | - | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | - |
Forward and Reverse - Range 1* | - | 1-13 km/h (0.6-8 mph) | - |
Forward and Reverse - Range 2 | - | 8 mile/h | - |
Forward and Reverse - Range 3 | - | 17 mile/h | - |
Hydraulic System - Lift/Tilt |
|||
Lift/Tilt System - Circuit | EH-Positive Flow Control, Flow Sharing | - | - |
Lift/Tilt System - Pump | Variable displacement piston | - | - |
Maximum Flow at 1,400-1,600 rpm | 153 gal/min | - | - |
Relief Valve Setting - Lift/Tilt | 4757 psi | - | - |
Lift Cylinder - Bore | 8.7 in | - | - |
Lift Cylinder - Stroke | 41.3 in | - | - |
Tilt Cylinder - Bore | 8.7 in | - | - |
Tilt Cylinder - Stroke | 27 in | - | - |
Hydraulic Cycle Times |
|||
Rack Back | 4.5 s | - | - |
Raise | 8 s | - | - |
Dump | 2.2 s | - | - |
Lower Float Down | 3.5 s | - | - |
Total Hydraulic Cycle Time | 18.2 s | - | - |
Hydraulic System - Steering |
|||
Steering System - Circuit | Pilot, load sensing | - | - |
Steering System - Pump | Piston, variable displacement | - | - |
Maximum Flow at 1,400-1,600 rpm | 71.3 gal/min | - | - |
Steering Cut Off Pressure | 4351 psi | - | - |
Total Steering Angle | 86° | - | - |
Steering Cycle Times - High Idle | 3.4 s | - | - |
Steering Cycle Times - Low Idle | 5.6 s | - | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | - |
Axles |
|||
Front | Fixed | - | - |
Rear | Trunnion | - | - |
Oscillation Angle | 13° | - | - |
Brakes |
|||
Brakes | ISO 3450:2011 | - | - |
Operator's Cab |
|||
ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - | - |
Sound Performance - Tier 4 Final / Stage V |
|||
Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | - | - |
Machine Sound Power Level (ISO 6395:2008) | 109 dB(A) | - | - |
Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - |
Machine Sound Power Level (ISO 6395:2008)** | 109 dB(A) | - | - |
Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” | - | - |
Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 | - | - |
Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - |
Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - |
Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Sound Performance - Tier 3 / Stage IIIA |
|||
Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A) | - | - |
Machine Sound Power Level (ISO 6395:2008) | 110 dB(A) | - | - |
Operator Sound Pressure Level (ISO 6396:2008)* | 72 dB(A) | - | - |
Machine Sound Power Level (ISO 6395:2008)** | 110 dB(A) | - | - |
Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” | - | - |
Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 | - | - |
Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - |
Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. | - | - |
Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - | - |
Service Refill Capacities |
|||
Fuel Tank | 147 gal (US) | 51.5 gal (US) | - |
Cooling System - Jacket Water | 30 gal (US) | - | - |
Cooling Systems - Power Train | 8 gal (US) | - | - |
Engine Crankcase | 16 gal (US) | 5.3 gal (US) | - |
Diesel Exhaust Fluid Tank | 8.7 gal (US) | - | - |
Transmission | 16 gal (US) | - | - |
Differential - Final Drives - Front | 49 gal (US) | - | - |
Differential - Final Drives - Rear | 49 gal (US) | - | - |
Hydraulic System - Implement/Steering | 126 gal (US) | - | - |
Note | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20% | - | - |
Rear Axles | - | 9.2 gal (US) | - |
Hydraulic System - Including Tank | - | 44.9 gal (US) | - |
Hydraulic Tank | - | 23.8 gal (US) | - |
Diesel Exhaust Fluid (DEF) Tank | - | 5 gal (US) | - |
Cooling System | - | 8.5 gal (US) | - |
Front Axles | - | 9.2 gal (US) | - |
Transmission - Gear Box | - | 2.9 gal (US) | - |
Dimensions (Approximate) - Standard Lift |
|||
Ground to Top of ROPS | 13.8 ft | - | - |
Ground to Top of Exhaust Stacks | 14.8 ft | - | - |
Ground to Top of Hood | 10.9 ft | - | - |
Ground to Bumper Clearance | 3.1 ft | - | - |
Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
Front Axle Centerline to Bucket Tip | 14 ft | - | - |
Wheel Base | 14.9 ft | - | - |
Maximum Overall Length | 39.3 ft | - | - |
Ground to Lower Hitch Clearance | 1.9 ft | - | - |
Ground to Center of Axles | 3.2 ft | - | - |
Clearance at Maximum Lift | 11.9 ft | - | - |
B-Pin Height - Maximum Lift | 18 ft | - | - |
Maximum Overall Height - Bucket Raised | 24.5 ft | - | - |
Reach - Maximum Lift | 6.5 ft | - | - |
Note | Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. | - | - |
Dimensions (Approximate) - High Lift |
|||
Ground to Top of ROPS | 13.8 ft | - | - |
Ground to Top of Exhaust Stacks | 14.8 ft | - | - |
Ground to Top of Hood | 10.9 ft | - | - |
Ground to Bumper Clearance | 3.1 ft | - | - |
Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
Front Axle Centerline to Bucket Tip | 15.3 ft | - | - |
Wheel Base | 14.9 ft | - | - |
Maximum Overall Length | 40.7 ft | - | - |
Ground to Lower Hitch Clearance | 1.9 ft | - | - |
Ground to Center of Axles | 3.2 ft | - | - |
Clearance at Maximum Lift | 13.3 ft | - | - |
B-Pin Height - Maximum Lift | 19.3 ft | - | - |
Maximum Overall Height - Bucket Raised | 25.8 ft | - | - |
Reach - Maximum Lift | 6.8 ft | - | - |
Note | Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. | - | - |
Dimensions - Millyard Linkage |
|||
Ground to Top of ROPS | 13.8 ft | - | - |
Ground to Top of Exhaust Stacks | 13.8 ft | - | - |
Ground to Top of Hood | 10.9 ft | - | - |
Ground to Bumper Clearance | 3.1 ft | - | - |
Rear Axle - Centerline to Bumper | 10.5 ft | - | - |
Front Axle Centerline to Fork Tip | 16.5 ft | - | - |
Wheel Base | 14.9 ft | - | - |
Maximum Overall Length | 41.9 ft | - | - |
Ground to Lower Hitch Clearance | 1.9 ft | - | - |
Ground to Center of Front Axle | 3.2 ft | - | - |
Fork Height with Level Arms | 8.1 ft | - | - |
Fork Top Clamp Opening | 13.1 ft | - | - |
Fork Height at Maximum Lift | 17.2 ft | - | - |
Hinge Pin Height at Maximum Lift | 16.1 ft | - | - |
Dump Angle at Maximum Lift | -39.4 ° | - | - |
Weights |
|||
Operating Weight | - | 36839 lb | - |
Note (2) | - | ^Aggregate Handler equipped with full counterweight, optional guards, roading fenders, cold start package, and 23.5R25 tires. | - |
Note (1) | - | **Aggregate Handler machine equipped with full counterweight and optional guards. | - |
Operating Weight (2) | - | 16 710 kg (36,839 lb)^ | - |
Operating Weight (1) | - | 16 199 kg (35,712 lb)** | - |
Buckets |
|||
Bucket Capacities | - | 2.9-5.0 m3 (3.8-6.5 yd3) | - |
Cab |
|||
ROPS | - | ISO 3471:2008 | - |
Note (1) | - | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | - |
FOPS | - | ISO 3449:2005 LEVEL II | - |
Declared Sound Levels | - | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- |
Steering |
|||
Maximum Flow - Steering Pump | - | 34 gal/min | - |
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | - | 3.1 s | - |
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | - | 2.3 s | - |
Steering Cylinder, Double Acting - Bore Diameter | - | 3.1 in | - |
Steering Cylinder, Double Acting - Rod Diameter | - | 2 in | - |
Steering Cylinder, Double Acting - Stroke | - | 15.7 in | - |
Note (1) | - | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - |
Maximum Working Pressure - Steering Pump | - | 3500 psi | - |
Note (2) | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - |
Loader Hydraulic System |
|||
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | - | 4351 psi | - |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | - | 4061 psi | - |
Note (1) | - | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - |
Tilt Cylinder, Double Acting - Bore Diameter | - | 5.9 in | - |
Relief Pressure - Tilt Cylinder | - | 4351 psi | - |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | - | 1.5/1.7 seconds | - |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | - | 9.7/10.6 seconds | - |
Tilt Cylinder, Double Acting - Rod Diameter | - | 3.5 in | - |
Maximum Flow - Implement Pump | - | 50 gal/min | - |
Note (2) | - | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - |
Tilt Cylinder, Double Acting - Stroke | - | 21.9 in | - |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | - | 5.5/6.2 seconds | - |
Maximum Flow - Implement Pump - 4th Function Maximum Flow* | - | 42 gal/min | - |
Note (3) | - | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - |
Lift Cylinder, Double Acting - Stroke | - | 31.1 in | - |
Maximum Working Pressure - Implement Pump | - | 4061 psi | - |
Lift Cylinder, Double Acting - Bore Diameter | - | 4.7 in | - |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | - | 2.7/2.7 seconds | - |
Lift Cylinder, Double Acting - Rod Diameter | - | 2.6 in | - |
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | - | 50 gal/min | - |
Power Train |
|||
Brakes - Parking | - | Spring applied hydraulically released | - |
Rear Axle - Traction Aid - Optional | - | Limited slip differential | - |
Rear Axle - Oscillation Angle by Tire Size - 23.5 R25 | - | ± 7 degrees | - |
Rear Axle | - | Oscillating | - |
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | - | ± 10.5 degrees | - |
Note (2) | - | Offset rims available to meet European roading requirements. | - |
Note (1) | - | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - |
Brakes - Service | - | Outboard wet disc | - |
Note (3) | - | *Differential front locking axle can be engaged on the go at full torque to 20 km/h (12.4 mph) on the 938M. | - |
Front Axle | - | Fixed | - |
Front Axle - Traction Aid* | - | Locking differential (standard) | - |
Sustainability |
|||
Recyclability | - | 94% | - |
Add a Similar Product: