Compare

Compare Equipment Go Back

Engine
	988 XE Wheel Loader View Product	920 Compact Wheel Loader View Product Remove	992 Wheel Loader View Product Remove	988 Wheel Loader View Product Remove	914 Compact Wheel Loader View Product Remove	986 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	580 hp	-	449 hp
Engine Model	Cat® C18	Cat C3.6	Cat® C32B	Cat® C18	Cat C3.6	Cat® C15
Rated Speed	1,700 rpm	-	1750 rpm	1700/rpm	-	2000
Peak Power Speed	1,500 rpm	-	-	1500/rpm	-	1600
Gross Power - SAE J1995:2014	588 hp	-	-	588 hp	-	456 hp
Net Power - SAE J1349:2011	538 hp	-	-	538 hp	-	373 hp
Bore	5.7 in	3.85 in	5.7 in	5.7 in	3.85 in	5.4 in
Stroke	7.2 in	4.72 in	6.4 in	7.2 in	4.72 in	6.75 in
Displacement	1105 in³	220 in³	1963.5 in³	1105 in³	220 in³	927 in²
Peak Torque - 1,200 rpm	2230 lbf·ft	-	-	2104 lbf·ft	-	-
Torque Rise	58%	-	-	58 %	-	16%
Note (1)	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Maximum Gross Power	-	121 hp	-	-	110 hp	-
Rated Net Power - Rated Engine Speed	-	2200 r/min	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	2200 r/min	-	-	1800 r/min	-
Rated Net Power - SAE J1349	-	120 hp	-	-	99 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	122 hp	-	-	112 hp	-
Rated Net Power - ISO 9249	-	118 hp	-	-	98 hp	-
Maximum Gross Torque - SAE J1995	-	372 ft·lbf	-	-	335 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	369 ft·lbf	-	-	332 ft·lbf	-
Maximum Net Torque - SAE J1349	-	366 ft·lbf	-	-	329 ft·lbf	-
Maximum Net Torque - ISO 9249	-	363 ft·lbf	-	-	327 ft·lbf	-
Emissions	-	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	-	Engine meets Tier 4 Final/Stage V emission standards.	-
Note	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Maximum Gross Power - ISO 14396	-	121 hp	-	-	110 hp	-
Net Power	-	-	814 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	900 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	937 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	907 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	944 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	884 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	921 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	893 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	931 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	823 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	823 hp	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	3514 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	3555 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	3537 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	3570 ft·lbf	-	-	-
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	-	-	373 hp
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	-	-	373 hp
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	-	-	1778 lb/ft
Operating Specifications
Operating Weight	116362 lb	-	233430 lb	112574 lb	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	11.5-24.5 m³ (15-32 yd³)	4.7-13 m3 (6.2-17 yd3)	-	5.0-10.3 m³ (6.5-13.5 yd³)
Rated Payload - Quarry Face	12.5 t	-	-	12.5 t	-	-
Rated Payload - Loose Material	16 t	-	-	16 t	-	-
Rated Payload - Standard	-	-	25.5 ton (US)	-	-	-
Rated Payload - Standard (Material Handler)	-	-	30 ton (US)	-	-	-
Rated Payload - High Lift	-	-	22.5 ton (US)	-	-	-
Rated Payload - High Lift (Material Handler)	-	-	27 ton (US)	-	-	-
Cat Truck Match - Standard	-	-	775/777	770 - 772	-	770/735/740/745
Cat Truck Match - High Lift	-	-	785	773 - 775	-	772/773
Operating Weight - Standard	-	-	-	-	-	97785 lb
Operating Weight - High Lift	-	-	-	-	-	104005 lb
Rated Payload - Standard (Quarry Face)	-	-	-	-	-	11 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	-	-	14 ton (US)
Rated Payload - High Lift (Quarry Face)	-	-	-	-	-	11 ton (US)
Rated Payload - Loose Material (High Lift)	-	-	-	-	-	12.1 ton (US)
Transmission
Transmission Type	Cat switched reluctance electric drive	-	Cat Planetary Powershift	Cat planetary powershift	-	Cat planetary power shift
Forward 1 (virtual)	4.3 mile/h	-	-	-	-	-
Forward 2 (virtual)	7 mile/h	-	-	-	-	-
Forward 3 (virtual)	13.8 mile/h	-	-	-	-	-
Forward 4 (virtual)	20 mile/h	-	-	-	-	-
Reverse 1 (virtual)	4.3 mile/h	-	-	-	-	-
Reverse 2 (virtual)	7 mile/h	-	-	-	-	-
Reverse 3 (virtual)	17.5 mile/h	-	-	-	-	-
Note	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-
Forward and Reverse - Speed Range 3	-	25 mile/h	-	-	25 mile/h	-
Forward and Reverse - Speed Range 2*	-	12.5 mile/h	-	-	12.5 mile/h	-
Forward and Reverse - Speed Range 1*	-	6.3 mile/h	-	-	6.3 mile/h	-
Forward - 1	-	-	4.3 mile/h	4 mile/h	-	5 mile/h
Forward - 2	-	-	7.4 mile/h	7.2 mile/h	-	8 mile/h
Forward - 3	-	-	12.7 mile/h	12.7 mile/h	-	-
Direct Drive - Forward 1	-	-	Disabled	Lock-up disabled	-	-
Direct Drive - Forward 2	-	-	8 mile/h	7.8 mile/h	-	8 mile/h
Direct Drive - Forward 3	-	-	14 mile/h	13.9 mile/h	-	14 mile/h
Reverse - 1	-	-	4.7 mile/h	4.7 mile/h	-	5 mile/h
Reverse - 2	-	-	8.1 mile/h	8.3 mile/h	-	8 mile/h
Reverse - 3	-	-	13.9 mile/h	14.4 mile/h	-	-
Direct Drive - Reverse 1	-	-	5 mile/h	5 mile/h	-	-
Direct Drive - Reverse 2	-	-	8.8 mile/h	8.9 mile/h	-	9 mile/h
Direct Drive - Reverse 3	-	-	15.3 mile/h	15.8 mile/h	-	16 mile/h
Forward - 4	-	-	-	21.6 mile/h	-	-
Direct Drive - Forward 4	-	-	-	24.4 mile/h	-	24 mile/h
Direct Drive - Reverse 4	-	-	-	-	-	25.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH-Positive Flow Control, Flow Sharing	-	Positive Flow Control	EH- Positive Flow Control, Flow Sharing	-	Load Sense
Lift/Tilt System - Pump	Variable displacement piston	-	Variable Displacement Piston	Variable displacement piston	-	2 × 110 cc variable displacement
Maximum Flow at 1,400-1,600 rpm	153 gpm	-	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	5000 psi	4757 psi	-	4050 psi
Lift Cylinder - Bore	8.7 in	-	9.3 in	-	-	7.5 in
Lift Cylinder - Stroke	41.3 in	-	63.5 in	-	-	45 in
Tilt Cylinder - Bore	8.7 in	-	11.5 in	-	-	6.7 in
Tilt Cylinder - Stroke	27 in	-	41.5 in	-	-	28.4 in
Maximum Flow at 2,165 rpm	-	-	250 gpm	-	-	123 gpm
Maximum Flow at 1,400-1,860 rpm	-	-	-	153 gpm	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	-	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	-	266 mm × 685 mm (8.7 in × 27 in)	-	-
Pilot System	-	-	-	Variable displacement piston	-	-
Relief Valve Setting - Main	-	-	-	551 psi	-	-
Hydraulic Cycle Times
Rack Back	4.5 s	-	2.3 s	-	-	4.5 s
Raise	8 s	-	9 s	-	-	9 s
Dump	2.2 s	-	2.6 s	-	-	3.5 s
Lower Float Down	3.5 s	-	-	-	-	4.3 s
Total Hydraulic Cycle Time	18.2 s	-	17.1 s	-	-	21.3 s
Rack Back - High Lift	-	-	2.3 s	-	-	-
Raise - High Lift	-	-	9 s	-	-	-
Dump - High Lift	-	-	2.6 s	-	-	-
Float Down	-	-	3.2 s	-	-	-
Float Down - High Lift	-	-	3.2 s	-	-	-
Lower	-	-	-	-	-	5.2 s
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Pilot, Load Sensing	Pilot, load sensing	-	Load Sense
Steering System - Pump	Piston, variable displacement	-	Piston, Variable Displacement	Piston, variable displacement	-	Piston, variable displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	71.3 gpm	-	-
Steering Cut Off Pressure	4351 psi	-	4500 psi	-	-	4000 psi
Total Steering Angle	86°	-	80°	86 °	-	70°
Steering Cycle Times - High Idle	3.4 s	-	3.1 s	3.4 s	-	-
Steering Cycle Times - Low Idle	5.6 s	-	4.9 s	5.6 s	-	-
Maximum Flow at 1,400-1,850 rpm	-	-	70 gpm	-	-	-
Relief Valve Setting - Steering	-	-	-	4351 psi	-	-
Maximum Flow at 1,400 rpm	-	-	-	-	-	52 gpm
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	-	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
Front	Fixed	Fixed; Locking differential (standard)	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion
Oscillation Angle	13°	-	±9°	13 °	-	±12.5°
Oscillation Angle - Chain Arrangement	-	-	-	-	-	±8.5°
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	ISO 3450:2011	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	73 dB(A)	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)	109 dB(A)	-	-	111 dB(A)	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	109 dB(A)	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	73 dB(A)	-	74 dB(A)
Machine Sound Power Level (ISO 6395:2008)	110 dB(A)	-	-	112 dB(A)	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Service Refill Capacities
Fuel Tank	147 gal (US)	43.6 gal (US)	385.7 gal (US)	188 gal (US)	43.6 gal (US)	141 gal (US)
Cooling System - Jacket Water	30 gal (US)	-	-	-	-	-
Cooling Systems - Power Train	8 gal (US)	-	-	-	-	-
Engine Crankcase	16 gal (US)	2.6 gal (US)	-	-	2.6 gal (US)	-
Diesel Exhaust Fluid Tank	8.7 gal (US)	-	-	-	-	6 gal (US)
Transmission	16 gal (US)	0.8 gal (US)	51.5 gal (US)	24.3 gal (US)	0.8 gal (US)	20 gal (US)
Differential - Final Drives - Front	49 gal (US)	-	96.4 gal (US)	49.1 gal (US)	-	-
Differential - Final Drives - Rear	49 gal (US)	-	96.4 gal (US)	49.1 gal (US)	-	-
Hydraulic System - Implement/Steering	126 gal (US)	-	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-
Axles - Rear	-	4.5 gal (US)	-	-	-	-
Hydraulic System - Including Tank	-	25.9 gal (US)	-	-	25.9 gal (US)	-
Cooling System	-	5.7 gal (US)	-	31.7 gal (US)	5.7 gal (US)	-
Hydraulic Tank	-	14.5 gal (US)	-	-	14.5 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	4.8 gal (US)	-	-	4.8 gal (US)	-
Axles - Front	-	4.5 gal (US)	-	-	-	-
Cooling Systems	-	-	59.4 gal (US)	-	-	26 gal (US)
Crankcase	-	-	31.7 gal (US)	15.9 gal (US)	-	9 gal (US)
Hydraulic System Factory Fill (Implement)	-	-	104.1 gal (US)	-	-	-
Hydraulic Tank - Implement	-	-	60.2 gal (US)	-	-	-
Hydraulic Factory Fill (Steering)	-	-	32.5 gal (US)	-	-	-
Hydraulic Tank (Steering Tank Only)	-	-	26.3 gal (US)	-	-	-
Coolant (Validated by Test Cell Fill Quantities)	-	-	-	33 gal (US)	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	-	-	-	8.7 gal (US)	-	-
Transmission - Validated by Test Cell Fill Quantities	-	-	-	29 gal (US)	-	-
Hydraulic System Factory Fill	-	-	-	125.5 gal (US)	-	87 gal (US)
Hydraulic System - Tank Only	-	-	-	63.4 gal (US)	-	34 gal (US)
Axles - Rear Center Differential	-	-	-	-	2 gal (US)	-
Axles - Front Center Differential	-	-	-	-	2 gal (US)	-
Fuel Tank - Short Lift	-	-	-	-	-	127 gal (US)
Axle Oil - Differentials and Final Drives - Front	-	-	-	-	-	49 gal (US)
Axle Oil - Differentials and Final Drives - Rear	-	-	-	-	-	45 gal (US)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	13.8 ft	-	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-	-
Maximum Overall Length	39.3 ft	-	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.8 ft	-	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-	-
Maximum Overall Length	40.7 ft	-	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-	-	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-	-
Ground to Top of Exhaust Stacks	13.8 ft	-	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-	-
Front Axle Centerline to Fork Tip	16.5 ft	-	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-	-
Maximum Overall Length	41.9 ft	-	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-	-	-
Fork Height with Level Arms	8.1 ft	-	-	-	-	-
Fork Top Clamp Opening	13.1 ft	-	-	-	-	-
Fork Height at Maximum Lift	17.2 ft	-	-	-	-	-
Hinge Pin Height at Maximum Lift	16.1 ft	-	-	-	-	-
Dump Angle at Maximum Lift	-39.4 °	-	-	-	-	-
Weights
Operating Weight	-	21742 lb	-	-	19103 lb	-
Buckets
Bucket Capacities	-	1.3-3.5 m3 (1.7-4.6 yd3)	11.5-24.5 m³ (15-32 yd³)	-	1.3-3.5 m3 (1.7-4.6 yd3)	-
Bucket Capacities - General Purpose	-	1.3-1.9 m³ (1.7-2.5 yd³)	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	2.5-3.5 m³ (3.3-4.6 yd³)	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Sustainability
Recyclability	-	95%	-	-	95%	-
Cab
ROPS	-	ISO 3471:2008	-	-	ISO 3471:2008	-
FOPS	-	ISO 3449:2005	-	-	ISO 3449:2005	-
Note (3)	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (2)	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (1)	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Note (4)	-	*The measurements were conducted with the cab doors and windows closed.	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	43.6 gpm	-	-	39 gpm	-
Relief Pressure - Tilt Cylinder	-	4641 psi	-	-	4931 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	25 gpm	-	-	24 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	4641 psi	-	-	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	2.7 s	-	-	3.7 s	-
Note	-	All cycle times listed are with cylinder snubbing turned off.	-	-	-	-
Maximum Working Pressure - Implement Pump	-	4061 psi	-	-	4061 psi	-
Hydraulic Cycle Time - Total Cycle Time	-	11.5 s	-	-	12.5 s	-
Hydraulic Cycle Time - Rackback	-	2.2 s	-	-	2.2 s	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	1.8 s	-	-	1.4 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	4.8 s	-	-	5.2 s	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	40 gpm	-	-	32 gpm	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	25 gpm	-	-	-	-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	-	-	3046 psi	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	-	-	3046 psi	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	-	-	24 gpm	-
Steering
Maximum Working Pressure - Steering Pump	-	3190 psi	-	-	3263 psi	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	2.3 s	-	-	2.8 s	-
Steering Articulation Angle - Each Direction	-	40 °	-	-	40 °	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	3.4 turns	-	-	3.75 turns	-
Maximum Flow - Steering Pump	-	21.7 gpm	-	-	22 gpm	-
Tires
Other Choices Include	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid	-
Standard Size	-	17.5 R25 L2 XTLA	-	-	17.5 R25 L2 XTLA	-
Note (1)	-	Other tire choices are available. Contact your Cat dealer for details.	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Note (3)	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	109.4 °F	-	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	131 °F	-	-	-
Sound Performance - Standard
Note	-	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-	-
Sound Performance - Suppression
Note	-	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	-	17 ft	-	-	-
Ground to Top of ROPS	-	-	18.3 ft	-	-	-
Ground to Top of Hood	-	-	13.1 ft	-	-	-
Ground to Center of Front Axle	-	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	-	3.8 ft	-	-	-
Ground to Lower Hitch Clearance	-	-	2.2 ft	-	-	-
Reach - Maximum Lift	-	-	8.2 ft	-	-	-
Clearance at Maximum Lift	-	-	15.2 ft	-	-	-
B-Pin Height - Maximum Lift	-	-	22.8 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	-	30.8 ft	-	-	-
Rear Axle - Centerline to Bumper	-	-	13.5 ft	-	-	-
Tread Width	-	-	10.83 ft	-	-	-
Rack Back Angle - Maximum Lift	-	-	56.9 degrees	-	-	-
Dump Angle at Maximum Lift	-	-	-49.5 degrees	-	-	-
Rack Back Angle - Ground Level	-	-	40.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	-	14.74 ft	-	-	-
Rack Back Angle - Carry	-	-	48.9 degrees	-	-	-
Wheel Base	-	-	19.3 ft	-	-	-
Maximum Overall Length	-	-	50.8 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	-	18 ft	-	-	-
Dimensions - High Lift - Approximate
Tread Width	-	-	10.83 ft	-	-	-
Rack Back Angle - Ground Level	-	-	42.5 degrees	-	-	-
Dump Angle at Maximum Lift	-	-	-48.1 degrees	-	-	-
Rack Back Angle - Maximum Lift	-	-	56.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	-	14.75 ft	-	-	-
Rack Back Angle - Carry	-	-	51.6 degrees	-	-	-
Ground to Top of Exhaust Stacks	-	-	17 ft	-	-	-
Ground to Top of ROPS	-	-	18.3 ft	-	-	-
Ground to Top of Hood	-	-	13.1 ft	-	-	-
Ground to Center of Front Axle	-	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	-	3.8 ft	-	-	-
Ground to Lower Hitch Clearance	-	-	2.2 ft	-	-	-
Reach - Maximum Lift	-	-	7.6 ft	-	-	-
Clearance at Maximum Lift	-	-	17.2 ft	-	-	-
B-Pin Height - Maximum Lift	-	-	24.5 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	-	32 ft	-	-	-
Rear Axle - Centerline to Bumper	-	-	13.5 ft	-	-	-
Wheel Base	-	-	19.3 ft	-	-	-
Maximum Overall Length	-	-	51.6 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	-	18.8 ft	-	-	-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	-	-	-	4.5 s	-	-
Raise	-	-	-	8 s	-	-
Dump	-	-	-	2.2 s	-	-
Lower Float Down	-	-	-	3.5 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	18.2 s	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	-	13.8 ft	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft	-	13.3 ft
Ground to Top of Hood	-	-	-	10.9 ft	-	10.7 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft	-	10.3 ft
Front Axle Centerline to Bucket Tip	-	-	-	14 ft	-	13.8 ft
Wheel Base	-	-	-	14.9 ft	-	12.5 ft
Maximum Overall Length	-	-	-	39.3 ft	-	36.6 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft	-	1.5 ft
Clearance at Maximum Lift	-	-	-	11.9 ft	-	10.1 ft
B-Pin Height - Maximum Lift	-	-	-	18 ft	-	16.1 ft
Maximum Overall Height - Bucket Raised	-	-	-	24.5 ft	-	22.4 ft
Reach - Maximum Lift	-	-	-	6.5 ft	-	7.1 ft
Ground to Center of Front Axle	-	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Note	-	-	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	-	13.8 ft	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft	-	13.3 ft
Ground to Top of Hood	-	-	-	10.9 ft	-	10.7 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft	-	10.3 ft
Front Axle Centerline to Bucket Tip	-	-	-	15.3 ft	-	15.3 ft
Wheel Base	-	-	-	14.9 ft	-	12.5 ft
Maximum Overall Length	-	-	-	40.7 ft	-	38 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft	-	1.5 ft
Clearance at Maximum Lift	-	-	-	13.3 ft	-	11.6 ft
B-Pin Height - Maximum Lift	-	-	-	19.3 ft	-	17.6 ft
Maximum Overall Height - Bucket Raised	-	-	-	25.8 ft	-	23.9 ft
Reach - Maximum Lift	-	-	-	6.8 ft	-	7.4 ft
Ground to Center of Front Axle	-	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Note	-	-	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	-	1.5 ft
Reach at Maximum Lift	-	-	-	-	-	8 ft
Clearance at Maximum Lift	-	-	-	-	-	10.7 ft
B-Pin Height at Maximum Lift	-	-	-	-	-	15 ft
Maximum Overall Height, Bucket Raised	-	-	-	-	-	20.9 ft
Rear Axle Center Line to Bumper	-	-	-	-	-	10.3 ft
Wheel Base	-	-	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	-	-	35 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	-	12.2 ft
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	-	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	-	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	-	1.5 ft
B-Pin Height at Maximum Lift	-	-	-	-	-	15 ft
Rear Axle Center Line to Bumper	-	-	-	-	-	10.3 ft
Wheel Base	-	-	-	-	-	12.5 ft
Maximum Overall Length	-	-	-	-	-	35.4 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	-	12.6 ft

Compare Equipment Go Back

988 XE Wheel Loader

920 Compact Wheel Loader

992 Wheel Loader

988 Wheel Loader

914 Compact Wheel Loader

986 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Weights

Buckets

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Hydraulic Cycle Time (1,400-1,860 rpm)

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork