Compare

Compare Equipment Go Back

Engine
	988 XE Wheel Loader View Product	914 Compact Wheel Loader View Product Remove	988 Wheel Loader View Product Remove	990 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	580 hp	752 hp	-
Engine Model	Cat® C18	Cat C3.6	Cat® C18	Cat® C27	Cat C3.6
Rated Speed	1,700 rpm	-	1700/rpm	1800 r/min	-
Peak Power Speed	1,500 rpm	-	1500/rpm	-	-
Gross Power - SAE J1995:2014	588 hp	-	588 hp	766 hp	-
Net Power - SAE J1349:2011	538 hp	-	538 hp	-	-
Bore	5.7 in	3.85 in	5.7 in	5.4 in	3.85 in
Stroke	7.2 in	4.72 in	7.2 in	6 in	4.72 in
Displacement	1105 in³	220 in³	1105 in³	1649.5 in³	220 in³
Peak Torque - 1,200 rpm	2230 lbf·ft	-	2104 lbf·ft	2624 lb/ft	-
Torque Rise	58%	-	58 %	18 %	-
Note (1)	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-
Maximum Gross Power	-	110 hp	-	-	121 hp
Rated Net Power - Rated Engine Speed	-	2200 r/min	-	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	1800 r/min	-	-	2200 r/min
Rated Net Power - SAE J1349	-	99 hp	-	-	120 hp
Maximum Gross Power - ISO 14396 (metric)	-	112 hp	-	-	122 hp
Rated Net Power - ISO 9249	-	98 hp	-	-	118 hp
Maximum Gross Torque - SAE J1995	-	335 ft·lbf	-	-	372 ft·lbf
Maximum Gross Torque - ISO 14396	-	332 ft·lbf	-	-	369 ft·lbf
Maximum Net Torque - SAE J1349	-	329 ft·lbf	-	-	366 ft·lbf
Maximum Net Torque - ISO 9249	-	327 ft·lbf	-	-	363 ft·lbf
Emissions	-	Engine meets Tier 4 Final/Stage V emission standards.	-	Option 2 - Emits equivalent to U.S. EPA Tier 2	Engine meets Tier 4 Final/Stage V emission standards.
Note	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396	-	110 hp	-	-	121 hp
Net Power - SAE J1349:2011 - Standard Ambient	-	-	-	699 hp	-
Net Power - SAE J1349:2011 - High Ambient	-	-	-	648 hp	-
Operating Specifications
Operating Weight	116362 lb	-	112574 lb	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	4.7-13 m3 (6.2-17 yd3)	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	-
Rated Payload - Quarry Face	12.5 t	-	12.5 t	-	-
Rated Payload - Loose Material	16 t	-	16 t	-	-
Cat Truck Match - Standard	-	-	770 - 772	773-775	-
Cat Truck Match - High Lift	-	-	773 - 775	775-777	-
Operating Weight - Standard	-	-	-	178517 lb	-
Rated Payload - Standard	-	-	-	17.5 ton (US)	-
Rated Payload - High Lift	-	-	-	17.5 ton (US)	-
Transmission
Transmission Type	Cat switched reluctance electric drive	-	Cat planetary powershift	Cat planetary power shift	-
Forward 1 (virtual)	4.3 mile/h	-	-	-	-
Forward 2 (virtual)	7 mile/h	-	-	-	-
Forward 3 (virtual)	13.8 mile/h	-	-	-	-
Forward 4 (virtual)	20 mile/h	-	-	-	-
Reverse 1 (virtual)	4.3 mile/h	-	-	-	-
Reverse 2 (virtual)	7 mile/h	-	-	-	-
Reverse 3 (virtual)	17.5 mile/h	-	-	-	-
Note	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3	-	25 mile/h	-	-	25 mile/h
Forward and Reverse - Speed Range 1*	-	6.3 mile/h	-	-	6.3 mile/h
Forward and Reverse - Speed Range 2*	-	12.5 mile/h	-	-	12.5 mile/h
Forward - 1	-	-	4 mile/h	4.6 mile/h	-
Forward - 2	-	-	7.2 mile/h	8.2 mile/h	-
Forward - 3	-	-	12.7 mile/h	14.5 mile/h	-
Forward - 4	-	-	21.6 mile/h	-	-
Reverse - 1	-	-	4.7 mile/h	5.1 mile/h	-
Reverse - 2	-	-	8.3 mile/h	9.1 mile/h	-
Reverse - 3	-	-	14.4 mile/h	16 mile/h	-
Direct Drive - Forward 1	-	-	Lock-up disabled	Lock-up disabled	-
Direct Drive - Forward 2	-	-	7.8 mile/h	8.2 mile/h	-
Direct Drive - Forward 3	-	-	13.9 mile/h	14.5 mile/h	-
Direct Drive - Forward 4	-	-	24.4 mile/h	-	-
Direct Drive - Reverse 1	-	-	5 mile/h	5.1 mile/h	-
Direct Drive - Reverse 2	-	-	8.9 mile/h	9.1 mile/h	-
Direct Drive - Reverse 3	-	-	15.8 mile/h	16 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH-Positive Flow Control, Flow Sharing	-	EH- Positive Flow Control, Flow Sharing	Positive flow control	-
Lift/Tilt System - Pump	Variable displacement piston	-	Variable displacement piston	-	-
Maximum Flow at 1,400-1,600 rpm	153 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	4757 psi	4786 psi	-
Lift Cylinder - Bore	8.7 in	-	-	-	-
Lift Cylinder - Stroke	41.3 in	-	-	-	-
Tilt Cylinder - Bore	8.7 in	-	-	-	-
Tilt Cylinder - Stroke	27 in	-	-	-	-
Maximum Flow at 1,400-1,860 rpm	-	-	153 gpm	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	210 mm × 1050 mm (8.7 in × 41.3 in)	235 mm × 1287 mm (9.3 in × 50.7 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	266 mm × 685 mm (8.7 in × 27 in)	292.1 mm × 820 mm (11.5 in × 32.3 in)	-
Pilot System	-	-	Variable displacement piston	Open loop and pressure reducing	-
Relief Valve Setting - Main	-	-	551 psi	-	-
Lift/Tilt System	-	-	-	Variable displacement piston	-
Maximum Flow at 1,800 rpm	-	-	-	240 gpm	-
Pilot Relief Setting	-	-	-	507 psi	-
Hydraulic Cycle Times
Rack Back	4.5 s	-	-	4.3 s	-
Raise	8 s	-	-	8.6 s	-
Dump	2.2 s	-	-	2.9 s	-
Lower Float Down	3.5 s	-	-	3.7 s	-
Total Hydraulic Cycle Time	18.2 s	-	-	-	-
Lower	-	-	-	3.7 s	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	13.8 s	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Pilot, load sensing	Pilot, load sensing	-
Steering System - Pump	Piston, variable displacement	-	Piston, variable displacement	Piston, variable displacement	-
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	71.3 gpm	-	-
Steering Cut Off Pressure	4351 psi	-	-	-	-
Total Steering Angle	86°	-	86 °	70°	-
Steering Cycle Times - High Idle	3.4 s	-	3.4 s	-	-
Steering Cycle Times - Low Idle	5.6 s	-	5.6 s	-	-
Relief Valve Setting - Steering	-	-	4351 psi	5004 psi	-
Maximum Flow at 1,400 rpm	-	-	-	96.2 gpm	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	-
Axles
Front	Fixed	Fixed; Locking differential (standard)	Fixed	Fixed	Fixed; Locking differential (standard)
Rear	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)
Oscillation Angle	13°	-	13 °	8.5°	-
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	ISO 3450: 2011	-
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	73 dB(A)	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	109 dB(A)	-	111 dB(A)	116 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	109 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	*Sound suppression equipped	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	114 dB(A)	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	110 dB(A)	-	112 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	147 gal (US)	43.6 gal (US)	188 gal (US)	281 gal (US)	43.6 gal (US)
Cooling System - Jacket Water	30 gal (US)	-	-	-	-
Cooling Systems - Power Train	8 gal (US)	-	-	-	-
Engine Crankcase	16 gal (US)	2.6 gal (US)	-	20 gal (US)	2.6 gal (US)
Diesel Exhaust Fluid Tank	8.7 gal (US)	-	-	-	-
Transmission	16 gal (US)	0.8 gal (US)	24.3 gal (US)	29.1 gal (US)	0.8 gal (US)
Differential - Final Drives - Front	49 gal (US)	-	49.1 gal (US)	71.6 gal (US)	-
Differential - Final Drives - Rear	49 gal (US)	-	49.1 gal (US)	68.9 gal (US)	-
Hydraulic System - Implement/Steering	126 gal (US)	-	-	-	-
Note	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cooling System	-	5.7 gal (US)	31.7 gal (US)	54.9 gal (US)	5.7 gal (US)
Axles - Rear Center Differential	-	2 gal (US)	-	-	-
Hydraulic System - Including Tank	-	25.9 gal (US)	-	-	25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	4.8 gal (US)	-	-	4.8 gal (US)
Hydraulic Tank	-	14.5 gal (US)	-	-	14.5 gal (US)
Axles - Front Center Differential	-	2 gal (US)	-	-	-
Coolant (Validated by Test Cell Fill Quantities)	-	-	33 gal (US)	-	-
Crankcase	-	-	15.9 gal (US)	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	-	-	8.7 gal (US)	-	-
Transmission - Validated by Test Cell Fill Quantities	-	-	29 gal (US)	-	-
Hydraulic System Factory Fill	-	-	125.5 gal (US)	210 gal (US)	-
Hydraulic System - Tank Only	-	-	63.4 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	68.9 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	-	34.9 gal (US)	-
Axles - Rear	-	-	-	-	4.5 gal (US)
Axles - Front	-	-	-	-	4.5 gal (US)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	39.3 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	40.7 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	13.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Fork Tip	16.5 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	41.9 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-	-
Fork Height with Level Arms	8.1 ft	-	-	-	-
Fork Top Clamp Opening	13.1 ft	-	-	-	-
Fork Height at Maximum Lift	17.2 ft	-	-	-	-
Hinge Pin Height at Maximum Lift	16.1 ft	-	-	-	-
Dump Angle at Maximum Lift	-39.4 °	-	-	-	-
Weights
Operating Weight	-	19103 lb	-	-	21742 lb
Buckets
Bucket Capacities	-	1.3-3.5 m3 (1.7-4.6 yd3)	-	-	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	1.3-1.9 m³ (1.7-2.5 yd³)	-	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	2.5-3.5 m³ (3.3-4.6 yd³)	-	-	2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
Recyclability	-	95%	-	-	95%
Cab
ROPS	-	ISO 3471:2008	-	-	ISO 3471:2008
FOPS	-	ISO 3449:2005	-	-	ISO 3449:2005
Note (4)	-	*The measurements were conducted with the cab doors and windows closed.	-	-	*The measurements were conducted with the cab doors and windows closed.
Note (2)	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Steering
Maximum Flow - Steering Pump	-	22 gpm	-	-	21.7 gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	3.75 turns	-	-	3.4 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	2.8 s	-	-	2.3 s
Maximum Working Pressure - Steering Pump	-	3263 psi	-	-	3190 psi
Steering Articulation Angle - Each Direction	-	40 °	-	-	40 °
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	3046 psi	-	-	-
Maximum Flow - Implement Pump	-	39 gpm	-	-	43.6 gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	24 gpm	-	-	25 gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	3046 psi	-	-	-
Hydraulic Cycle Time - Total Cycle Time	-	12.5 s	-	-	11.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	5.2 s	-	-	4.8 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	24 gpm	-	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	1.4 s	-	-	1.8 s
Relief Pressure - Tilt Cylinder	-	4931 psi	-	-	4641 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	32 gpm	-	-	40 gpm
Maximum Working Pressure - Implement Pump	-	4061 psi	-	-	4061 psi
Hydraulic Cycle Time - Rackback	-	2.2 s	-	-	2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	3.7 s	-	-	2.7 s
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	-	4641 psi
Note	-	-	-	-	All cycle times listed are with cylinder snubbing turned off.
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	-	25 gpm
Tires
Other Choices Include	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)	-	Other tire choices are available. Contact your Cat dealer for details.	-	-	Other tire choices are available. Contact your Cat dealer for details.
Standard Size	-	17.5 R25 L2 XTLA	-	-	17.5 R25 L2 XTLA
Note (3)	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	-	-	4.5 s	-	-
Raise	-	-	8 s	-	-
Dump	-	-	2.2 s	-	-
Lower Float Down	-	-	3.5 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	18.2 s	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	13.8 ft	17.2 ft	-
Ground to Top of Exhaust Stacks	-	-	14.8 ft	16.6 ft	-
Ground to Top of Hood	-	-	10.9 ft	12.7 ft	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	12.5 ft	-
Front Axle Centerline to Bucket Tip	-	-	14 ft	15.4 ft	-
Wheel Base	-	-	14.9 ft	15.1 ft	-
Maximum Overall Length	-	-	39.3 ft	42.9 ft	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	2 ft	-
Clearance at Maximum Lift	-	-	11.9 ft	7.2 ft	-
B-Pin Height - Maximum Lift	-	-	18 ft	19.7 ft	-
Maximum Overall Height - Bucket Raised	-	-	24.5 ft	27.2 ft	-
Reach - Maximum Lift	-	-	6.5 ft	7.2 ft	-
Ground to Bumper Clearance	-	-	-	3.5 ft	-
Ground to Center of Front Axle	-	-	-	4.2 ft	-
Rack Back Angle at Ground Level	-	-	-	40.4°	-
Rack Back Angle at Carry	-	-	-	48.8°	-
Rack Angle at Maximum Lift	-	-	-	63.7°	-
Dump Angle at Maximum Lift	-	-	-	45°	-
Note	-	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	13.8 ft	17.2 ft	-
Ground to Top of Exhaust Stacks	-	-	14.8 ft	16.6 ft	-
Ground to Top of Hood	-	-	10.9 ft	12.7 ft	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	12.5 ft	-
Front Axle Centerline to Bucket Tip	-	-	15.3 ft	17.8 ft	-
Wheel Base	-	-	14.9 ft	15.1 ft	-
Maximum Overall Length	-	-	40.7 ft	45.3 ft	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	2 ft	-
Clearance at Maximum Lift	-	-	13.3 ft	14.8 ft	-
B-Pin Height - Maximum Lift	-	-	19.3 ft	21.2 ft	-
Maximum Overall Height - Bucket Raised	-	-	25.8 ft	28.7 ft	-
Reach - Maximum Lift	-	-	6.8 ft	8.5 ft	-
Ground to Bumper Clearance	-	-	-	3.5 ft	-
Ground to Center of Front Axle	-	-	-	4.2 ft	-
Rack Back Angle at Ground Level	-	-	-	39.9°	-
Rack Back Angle at Carry	-	-	-	49.3°	-
Rack Angle at Maximum Lift	-	-	-	60.6°	-
Dump Angle at Maximum Lift	-	-	-	51°	-
Note	-	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	-	-	-	116 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	114 dB(A)	-
Note (1)	-	-	-	*Sound suppression equipped	-
Note (2)	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (3)	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (4)	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-

Compare Equipment Go Back

988 XE Wheel Loader

914 Compact Wheel Loader

988 Wheel Loader

990 Wheel Loader

920 Compact Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Hydraulic Cycle Time (1,400-1,860 rpm)

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Sound Performance - Tier 2

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us