Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
-
-
Power Train
Hydrostatic
-
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
-
Weights
Operating Weight
20640 lb
154888 lb
-
Operating Weight - LGP
21369 lb
-
-
Operating Weight - LGP, 762 mm/30 in
21810 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Shipping Weight
-
111739 lb
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Track Motors
2
-
-
Relief Valve Settings
7033 psi
-
-
1.0 Forward
-
2.5 mile/h
-
1.5 Forward
-
3.4 mile/h
-
2.0 Forward
-
4.5 mile/h
-
2.5 Forward
-
6 mile/h
-
3.0 Forward
-
7.8 mile/h
-
1.0 Reverse
-
3.2 mile/h
-
1.5 Reverse
-
4.2 mile/h
-
2.0 Reverse
-
5.6 mile/h
-
2.5 Reverse
-
7.5 mile/h
-
3.0 Reverse
-
9.8 mile/h
-
Transmission Clutch Diameter
-
17 in
-
Type
-
Planetary powershift
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Pump Type
-
Variable displacement piston
-
Pump Output - Implement
-
112 gal/min
-
Note (1)
-
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
-
Fan Pump
-
21.7 gal/min
-
Note (2)
-
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
-
Tilt Cylinder Flow - Rod End Flow
-
112 gal/min
-
Tilt Cylinder Flow - Head End Flow
-
63.4 gal/min
-
Lift Cylinder Relief Valve Setting
-
4061.1 psi
-
Tilt Cylinder Relief Valve Setting
-
3872.5 psi
-
Ripper - Lift - Relief Valve Setting
-
4061.1 psi
-
Ripper - Pitch - Relief Valve Setting
-
4061.1 psi
-
Tank Capacity
-
32.2 gal (US)
-
Cylinder Sizing - Blade Lift - Bore
-
5.5 in
-
Cylinder Sizing - Blade Tilt - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Lift - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Angle - Bore
-
7.1 in
-
Cylinder Sizing - Blade Lift - Stroke
-
65.1 in
-
Cylinder Sizing - Blade Tilt - Stroke
-
9.5 in
-
Cylinder Sizing - Ripper Shank Lift - Stroke
-
21.1 in
-
Cylinder Sizing - Ripper Shank Angle - Stroke
-
26 in
-
Note (3)
-
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Digging Depth
13.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Overall Width
67.3 in
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Undercarriage
Ground Pressure - LGP
4.5 psi
-
-
Track Gauge - LGP
69 in
-
-
Length - Track on Ground - LGP
91 in
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
-
-
Ground Pressure - LGP, 762 mm (30 in)
3.9 psi
-
-
Length - Track on Ground - LGP, 762 mm (30 in)
91 in
-
-
Shoe Width - LGP
26 in
-
-
Shoe Width - LGP, 762 mm (30 in)
30 in
-
-
Track Gauge
63 in
100.4 in
-
Number of Rollers - Each Side
7
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
Ground Pressure
5.7 psi
-
-
Length of Track on Ground
91 in
-
-
Number of Shoes - Each Side - Abrasion Undercarriage
36
-
-
Shoe Width - Standard
20 in
-
-
Shoe Type
-
Extreme Service (ES)
-
Width - Shoe
-
24 in
-
Shoes/Side
-
44
-
Grouser Height
-
3.7 in
-
Pitch
-
10.2 in
-
Ground Clearance
-
28.5 in
-
Length - Track on Ground
-
152.8 in
-
Ground Contact Area
-
7347 in²
-
Track Rollers/Side
-
8
-
Number of Carrier Rollers
-
1 per side (optional)
-
Service Refill Capacities
Cooling System
5 gal (US)
-
-
Final Drive - Each - LGP
2.6 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Fuel Tank
51.5 gal (US)
-
-
Final Drives - Each Side
2.6 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
-
Dimensions
BLADE: Blade Width - LGP
126.7 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
BLADE: Digging Depth - LGP
23.2 in
-
-
Track Gauge - LGP
67.9 in
-
-
BLADE: Blade Capacity (SAE) - LGP
3.06 yd³
-
-
BLADE: Blade Width at Maximum Angle - LGP
115.8 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
Ground Clearance - LGP, 762 mm (30 in)
13 in
-
-
BLADE: Blade Height - LGP
39.8 in
-
-
BLADE: Blade Lift Height - LGP
30.2 in
-
-
Ground Clearance - LGP
13 in
-
-
Overall Length - With Blade - LGP, 762 mm (30 in)
169.6 in
-
-
Overall Length - With Blade - LGP
169.6 in
-
-
Note
Abrasion Undercarriage
-
-
BLADE: Maximum Tilt - LGP
17.7 in
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
BLADE: Blade Capacity (SAE) - Standard
2.86 yd³
-
-
Track Gauge - Standard
63 in
-
-
BLADE: Digging Depth - Standard
23.8 in
-
-
BLADE: Blade Lift Height - Standard
30.2 in
-
-
Ground Clearance - Standard
13 in
-
-
Overall Length - With Blade - Standard
170.7 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Blade Height - Standard
42.2 in
-
-
BLADE: Maximum Tilt - Standard
15.8 in
-
-
BLADE: Blade Width - Standard
109.5 in
-
-
BLADE: Blade Width at Maximum Angle - Standard
103.8 in
-
-
BLADE: Maximum Angle (either side) - Standard
25°
-
-
Length of Basic Dozer (without blade) - Standard
128.7 in
-
-
Dozer Height - Standard
109 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
103.5 in
-
-
Length of Basic Dozer (without blade) - LGP
128.7 in
-
-
Dozer Height - LGP, 762 mm (30 in)
109 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
83 in
-
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
128.7 in
-
-
Dozer Height - LGP
109 in
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level II
-
-
Retrieval Winch
Maximum Line Pull - Bare Drum
32150 lb
-
-
Control
Hydraulic
-
-
Rope Diameter - Optional
0.75 in
-
-
Drum Capacity - Optional Cable
195 ft
-
-
Maximum Line Speed - Full Drum
79 ft/min
-
-
Drum Capacity - Recommended Cable
277 ft
-
-
Winch Drive
Hydraulic
-
-
Weight
1747 lb
-
-
Maximum Line Pull - Full Drum
20350 lb
-
-
Rope Diameter - Recommended
0.63 in
-
-
Maximum Line Speed - Bare Drum
50 ft/min
-
-
Speed
Variable
-
-
Winch Length
35.63 in
-
-
Drum Diameter
8 in
-
-
Overall width
27.91 in
-
-
Drum Width
9.65 in
-
-
Throat Clearance
5.6 in
-
-
High Performance Winch
Winch length
27.76 in
-
-
Rope diameter – optional
0.75 in
-
-
Maximum line speed – bare drum
131 ft/min
-
-
Maximum line pull – bare drum
40000 lb
-
-
Weight
1345 lb
-
-
Drum capacity – optional
256 ft
-
-
Maximum line speed – full drum
207 ft/min
-
-
Rope diameter – recommended
0.63 in
-
-
Winch drive
Hydrostatic
-
-
Throat clearance
6.75 in
-
-
Drum diameter
10 in
-
-
Overall width
29.2 in
-
-
Drum width
10.8 in
-
-
Maximum line pull – full drum
25000 lb
-
-
Speed
Variable
-
-
Drum capacity – recommended cable
371 ft
-
-
Control
Hydraulic
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
-
Cat® C27
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
602 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
620 HP
-
Engine Power - ISO 14396* - Reverse
-
754 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Displacement
-
1648 in³
-
Stroke
-
6 in
-
Bore
-
5.4 in
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
All Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Standards
ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
-
FOPS
-
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-
Sound
-
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
-
Note
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
Sound (1)
-
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
-
Note (1)
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
Note (2)
-
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
Note (3)
-
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
-
25.23 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.08 in³
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.14 in
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.86 in
-
10SU ABR - Ground Clearance - Maximum Tilt LH
-
56.3 in
-
10SU ABR - Ground Clearance - Maximum Tilt RH
-
56.3 in
-
10U ABR - Capacity (SAE J1265)
-
28.7 yd³
-
10U ABR - Width (over end bits)
-
207.1 in
-
10U ABR - Height
-
83.5 in
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10U ABR - Digging Depth - Blade Pitch: Nominal
-
60 in
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.9 in
-
10U ABR - Ground Clearance - Maximum Tilt LH
-
60.8 in
-
10U ABR - Ground Clearance - Maximum Tilt RH
-
60.8 in
-
10U ABR - Weights - Blade Weight*
-
23585 lb
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
-
154888 lb
-
Note (1)
-
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
Note (2)
-
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
Note (3)
-
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
-
49233 lbf
-
Maximum penetration depth (standard tip)
-
59.2 in
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
36 in
-
Weight
-
14209 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
-
53055 lbf
-
Maximum penetration depth (standard tip)
-
78.3 in
-
Weight
-
14548 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
-
Cat® C27
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
603 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
622 HP
-
Engine Power - ISO 14396* - Reverse
-
756 HP
-
Displacement
-
1648 in³
-
Bore
-
5.4 in
-
Stroke
-
6 in
-
Emissions
-
U.S. EPA Tier 2 Equivalent
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
All Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Fuel Tank Capacities
Fuel Tank - Usable Volume
-
323.3 gal (US)
-
Fuel Tank - Total Volume
-
335.2 gal (US)
-
Dimensions (Approximate)
Ground Clearance*
-
28.5 in
-
Track Gauge
-
100.4 in
-
Width - Without Trunnions - 610 mm/24 in ES
-
130.4 in
-
Width - Over Trunnions
-
148 in
-
Height - FOPS Cab*
-
162.8 in
-
Height - Top of Stack*
-
171.5 in
-
Height - ROPS/Canopy*
-
173.5 in
-
Note (1)
-
*Includes grouser height for total dimensions on hard surfaces.
