CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    854 Wheel Dozer
    View Product Remove
    844 Wheel Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 Cat C32B Cat® C27 Cat® C7.1
    Power - Net 104 hp - - -
    Displacement 220 in³ 1958 in² 1649.5 in³ 427.8 in³
    Net Power - 2,200 rpm - SAE J1349 104 hp - - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp - - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module, and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Net torque rise meets SAE J139. - -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - 814 hp - -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - 900 hp - -
    Gross Power - 907 hp - -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - 907 hp - -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - 823 hp - -
    Rated Speed - 1750 r/min 1800 r/min 2200 r/min
    Bore - 5.7 in 5.4 in 4.1 in
    Stroke - 6.4 in 6 in 5.3 in
    Peak Torque - 1,200 rpm - 3139 lb/ft - -
    Torque Rise - 30 % 18 % 26 %
    Note (3) - No engine derating required up to 3050 m (10,000 ft) altitude. - -
    Net Power - SAE J1349:2011 - Standard Ambient - - 699 hp -
    Emissions - - Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2 Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
    Engine Power - ISO 14396:2002 - - 786 hp 275 hp
    Gross Power - SAE J1995:2014 - - 766 hp 286 hp
    Net Power - SAE J1349:2011 - High Ambient - - 648 hp -
    Engine Power - ISO 14396: 2002 - - 752 hp 275 hp
    Peak Torque - Speed - - 2624 lb/ft -
    Note - - Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. -
    Net Power - SAE J1349:2011 - - - 249 hp
    Net Power - ISO 9249:2007 - - - 249 hp
    Peak Torque (1400 rpm) - - - 902 lbf·ft
    Peak Torque ( 1,400 rpm ) - - - 749 lbf·ft
    High Idle Speed - - - 2270 r/min
    Low Idle Speed - - - 800 r/min
    Maximum Altitude without Derating - - - 9842.5 ft

    Weights
    Operating Weight 20640 lb 224647 lb - -
    Operating Weight - LGP 21369 lb - - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - - -

    Transmission
    Drive Pumps 1 - - -
    Maximum Travel Speed - Forward 5.6 mile/h - - -
    Maximum Travel Speed - Reverse 6.2 mile/h - - -
    Track Motors 2 - - -
    Relief Valve Settings 7033 psi - - -
    Transmission Type - Cat Planetary Power Shift Cat Planetary Power Shift Cat Planetary Power Shift
    Converter Drive - Forward 1 - 4.4 mile/h 4.5 mile/h -
    Converter Drive - Forward 2 - 7.7 mile/h 8.3 mile/h -
    Converter Drive - Forward 3 - 13.2 mile/h 14.2 mile/h -
    Converter Drive - Reverse 1 - 4.8 mile/h 4.9 mile/h -
    Converter Drive - Reverse 2 - 8.4 mile/h 9.1 mile/h -
    Converter Drive - Reverse 3 - 14.6 mile/h 15.5 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disabled -
    Direct Drive - Forward 2 - 8.1 mile/h 8.5 mile/h -
    Direct Drive - Forward 3 - 14.2 mile/h 15.2 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h 5.4 mile/h -
    Direct Drive - Reverse 2 - 8.9 mile/h 9.6 mile/h -
    Direct Drive - Reverse 3 - 15.6 mile/h 16.4 mile/h -
    Note - Travel speeds based on 45/65-45 L-5 46 ply tires. Travel speeds based on 45/65-45 L-5 46 ply tires. -
    Forward - 1 - - - 3.7 mile/h
    Forward - 2 - - - 6.5 mile/h
    Forward - 3 - - - 11.2 mile/h
    Forward - 4 - - - 19.4 mile/h
    Reverse - 1 - - - 4.2 mile/h
    Reverse - 2 - - - 7.3 mile/h
    Reverse - 3 - - - 12.8 mile/h
    Reverse - 4 - - - 22.1 mile/h

    Hydraulic Controls
    Pump Output 17.2 gal/min - - -
    Relief Valve Settings 2988 psi - - -

    Ripper
    Type Parallelogram - - -
    Number of Shanks 3 - - -
    Height 6.5 in - - -
    Weight 1222 lb - - -
    Maximum Digging Depth 13.3 in - - -
    Maximum Reach - Ground Line 30.2 in - - -
    Overall Width 67.3 in - - -
    Maximum Ground Clearance Under Tip 17.6 in - - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - - -
    Track Gauge - LGP 69 in - - -
    Length - Track on Ground - LGP 91 in - - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - - -
    Shoe Width - LGP 26 in - - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - - -
    Track Gauge 63 in - - -
    Number of Rollers - Each Side 7 - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    Shoe Width - Standard 20 in - - -

    Undercarriage 
    Ground Pressure  5.7 psi - - -
    Length of Track on Ground  91 in - - -
    Number of Shoes - Each Side - Abrasion Undercarriage  36 - - -

    Service Refill Capacities
    Cooling System 5 gal (US) 53 gal (US) 54.9 gal (US) -
    Final Drive - Each - LGP 2.6 gal (US) - - -
    Crankcase - With Filter 2.8 gal (US) - - -
    Transmission - Hydraulic Tank 23.8 gal (US) - - -
    Fuel Tank 51.5 gal (US) - - 132.1 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - - -
    Fuel Tank - Standard - 413 gal (US) 286.6 gal (US) -
    Crankcase - 32 gal (US) 20 gal (US) -
    Transmission - 45 gal (US) 29.1 gal (US) 13.2 gal (US)
    Differential - Final Drives - Front - 98 gal (US) 71.6 gal (US) 17.2 gal (US)
    Differential - Final Drives - Rear - 90 gal (US) 68.9 gal (US) 17.2 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - 77 gal (US) - -
    Note (1) - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo - All nonroad Tier 4 Final and EU Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that
    Hydraulic System - Implement and Hydraulic Fan - - 68.9 gal (US) -
    Hydraulic System - Steering and Braking - - 34.9 gal (US) -
    Diesel Exhaust Fluid Tank - - - 4.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - - - 21.4 gal (US)
    Cooling Systems - Tier 3/Stage IIIA equivalent - - - 19.3 gal (US)
    Engine Crankcase - - - 5.3 gal (US)
    Hydraulic System - Implement/Steering - - - 34.1 gal (US)
    Hydraulic Tank Only - - - 19.8 gal (US)

    Service Refill Capacities 
    Final Drives - Each Side  2.6 gal (US) - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential = The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    BLADE: Digging Depth - LGP 23.2 in - - -
    Track Gauge - LGP 67.9 in - - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - - -
    BLADE: Blade Height - LGP 39.8 in - - -
    BLADE: Blade Lift Height - LGP 30.2 in - - -
    Ground Clearance - LGP 13 in - - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - - -
    Overall Length - With Blade - LGP 169.6 in - - -
    Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) - - -
    BLADE: Maximum Tilt - LGP 17.7 in - - -
    BLADE: Maximum Angle (either side) - LGP 25° - - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - - -
    Dozer Height - Standard 109 in - - -
    Width of Dozer (standard shoes, no blade) - LGP 94.9 in - - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - - -
    Dozer Height - LGP 109 in - - -

    Dimensions 
    BLADE: Blade Capacity (SAE) - Standard  2.86 yd³ - - -
    Track Gauge - Standard  63 in - - -
    BLADE: Digging Depth - Standard  23.8 in - - -
    BLADE: Blade Lift Height - Standard  30.2 in - - -
    Ground Clearance - Standard  13 in - - -
    Overall Length - With Blade - Standard  170.7 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58° - - -
    BLADE: Blade Height - Standard  42.2 in - - -
    BLADE: Maximum Tilt - Standard  15.8 in - - -
    Note  Abrasion Undercarriage - - -
    BLADE: Blade Width - Standard  109.5 in - - -
    BLADE: Blade Width at Maximum Angle - Standard  103.8 in - - -
    BLADE: Maximum Angle (either side) - Standard  25° - - -

    Engine 
    Power Train  Hydrostatic - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 Level II - - -
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards ISO 3471:2008 and ISO 3449:2005 Level II Standards -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - - -
    Control Hydraulic - - -
    Rope Diameter - Optional 0.75 in - - -
    Drum Capacity - Optional Cable 195 ft - - -
    Maximum Line Speed - Full Drum 79 ft/min - - -
    Drum Capacity - Recommended Cable 277 ft - - -
    Winch Drive Hydraulic - - -
    Weight 1747 lb - - -
    Maximum Line Pull - Full Drum 20350 lb - - -
    Rope Diameter - Recommended 0.63 in - - -
    Maximum Line Speed - Bare Drum 50 ft/min - - -
    Speed Variable - - -
    Winch Length 35.63 in - - -
    Drum Diameter 8 in - - -
    Overall width 27.91 in - - -
    Drum Width 9.65 in - - -
    Throat Clearance 5.6 in - - -

    High Performance Winch
    Winch length 27.76 in - - -
    Rope diameter – optional 0.75 in - - -
    Maximum line speed – bare drum 131 ft/min - - -
    Maximum line pull – bare drum 40000 lb - - -
    Weight 1345 lb - - -
    Drum capacity – optional 256 ft - - -
    Maximum line speed – full drum 207 ft/min - - -
    Rope diameter – recommended 0.63 in - - -
    Winch drive Hydrostatic - - -
    Throat clearance 6.75 in - - -
    Drum diameter 10 in - - -
    Overall width 29.2 in - - -
    Drum width 10.8 in - - -
    Maximum line pull – full drum 25000 lb - - -
    Speed Variable - - -
    Drum capacity – recommended cable 371 ft - - -
    Control Hydraulic - - -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - 161 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 177 mm × 1760 mm (0.58 ft × 5.8 ft) 133 mm × 1535 mm (5.25 in × 60.4 in) 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 267 mm × 286 mm (0.88 ft × 0.94 ft) 210 mm × 188 mm (8.25 in × 7.4 in) -
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - - 82 gal/min -
    Relief Valve Setting - Bulldozer (Large Pump) - - 2700 psi -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - - 2920 psi -
    Lift/Tilt System - Circuit - - - Pilot operated load sensing valve with EH
    Lift/Tilt System - - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - - 23.5 gal/min
    Relief Valve Setting - Lift/Tilt - - - 3190 psi
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - - 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - - - Open center, fixed displacement gear
    Pilot Relief Valve Setting - - - 3046 psi

    Axles
    Front - Fixed Fixed Planetary – Fixed
    Rear - Trunnion Trunnion Planetary – Oscillating
    Oscillation Angle - - 8.5 ° ±10°

    Brakes
    Brakes - Meets ISO 3540:2011 Meets ISO 3540:2011 -

    Blades
    Blade Capacities - 30.5 to 44.8 m3 (40 to 58.6 yd3) - -

    Dimensions (Approximate)
    Height - Top of ROPS - 18.25 ft 17.2 ft -
    Height - Top of Exhaust Pipe - 17.17 ft 16.6 ft 11.3 ft
    Height - Top of Hood - 13 ft 12.7 ft 8.7 ft
    Ground Clearance - 27 in 2 ft -
    Centerline of Front Axle to Hitch - 9.67 ft 7.5 ft 5.5 ft
    Centerline of Rear Axle to Edge of Bumper - 13.75 ft 12.5 ft -
    Wheel Base - 19.25 ft 15.1 ft 11 ft
    Length - With Blade on Ground - 44 ft 36.5 ft -
    Height to Top of Beacon - - - 13.1 ft
    Height - Top of Cab - - - 12.1 ft
    Height to Top of Radiator Guard - - - 8 ft
    Ground Clearance to Hitch - - - 1.4 ft
    Ground Clearance to Transmission Guard - - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - - 2.3 ft
    Centerline of Rear Axle to Bumper - - - 6.5 ft
    Width over Platform - - - 10.3 ft
    Overall Length to Front Tire - - - 21 ft
    Overall Machine Length with Straight Blade - - - 23.6 ft
    Overall Machine Length with Coal Blade - - - 25.5 ft

    Hydraulic System - Steering
    Steering System - Pump - Piston, variable displacement Piston, variable displacement Variable displacement piston
    Minimum Turning Radius - Over Blade - 31 ft 34 ft -
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing Pilot, load sensing
    Total Steering Angle - 86 degrees 35 ° 72°
    Relief Valve Setting - 5004 psi 4500 psi -
    Maximum Flow - - 94.3 gal/min -
    Maximum Flow at 2,200 rpm - - - 38.8 gal/min
    Relief Valve Setting - Steering - - - 4003 psi
    Steering Cycle Times - High Idle - - - 3 s
    Steering Cycle Times - Low Idle - - - 8.2 s

    Operating Specifications
    Operating Weight - 224647 lb 165089 lb -
    Blade Capacity Range - - 20.8 yd³ -
    Operating Weight (Tier 4 Final/Stage V) - - - 48526 lb
    Operating Weight (Tier 3/Stage IIIA equivalent) - - - 47887 lb

    Sound Performance Levels
    Sound Performance - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A) 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 116 dB(A) 111 dB(A)
    Operator Sound Pressure Level (ISO 6396:2008)* - - 72 dB(A) 70 dB(A)
    Machine Sound Power Level (ISO 6395:2008)* - - 114 dB(A) 109 dB(A)
    Note (1) - - *Sound suppression equipped * Sound suppression equipped
    Note (2) - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (3) - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (4) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

    Sound Performance - Tier 2
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 116 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)* - - 114 dB(A) -
    Note (1) - - *Sound suppression equipped -
    Note (2) - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (3) - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (4) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -

    Braking System
    Service Brakes - - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - - Drum and Shoe, Spring Applied, Hydraulic Released

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 112 dB(A)
    Operator Sound Pressure Level (ISO 6396:2008)* - - - 70 dB(A)
    Machine Sound Power Level (ISO 6395:2008)* - - - 110 dB(A)
    Note (1) - - - * Sound suppression equipped
    Note (2) - - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (3) - - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
    Note (4) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

    Straight Blade
    Capacity - - - 3.72 yd³
    Overall Width - - - 12 ft
    Height - - - 3.3 ft
    Dig Depth - - - 1.6 ft
    Ground Clearance - - - 3 ft
    Maximum Tilt - - - 2.6 ft
    Turning Radius – Outside Corner of Blade - - - 23.5 ft
    Turning Radius – Inside Corner of Blade - - - 11.6 ft
    Weight - - - 3000 lb
    Total Operating Weight - - - 48526 lb

    Coal Blade
    Capacity - - - 13.8 yd³
    Overall Width - - - 14.2 ft
    Height - - - 4.8 ft
    Dig Depth - - - 1.6 ft
    Ground Clearance - - - 3.1 ft
    Maximum Tilt - - - 3.1 ft
    Turning Radius – Outside Corner of Blade - - - 25.1 ft
    Turning Radius – Inside Corner of Blade - - - 11.2 ft
    Weight - - - 4429 lb
    Total Operating Weight - - - 49996 lb
    Add a Similar Product: