CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    854 Wheel Dozer
    View Product Remove
    844 Wheel Dozer
    View Product Remove
    D7 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 Cat C32B Cat® C27 Cat C9.3B
    Power - Net 104 hp - - 265 hp
    Displacement 220 in³ 1958 in² 1649.5 in³ -
    Net Power - 2,200 rpm - SAE J1349 104 hp - - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp - - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. - Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Net torque rise meets SAE J139. - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - 814 hp - -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - 900 hp - -
    Gross Power - 907 hp - -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - 907 hp - -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - 823 hp - -
    Rated Speed - 1750 r/min 1800 r/min -
    Bore - 5.7 in 5.4 in -
    Stroke - 6.4 in 6 in -
    Peak Torque - 1,200 rpm - 3139 lb/ft - -
    Torque Rise - 30 % 18 % -
    Note (3) - No engine derating required up to 3050 m (10,000 ft) altitude. - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Net Power - SAE J1349:2011 - Standard Ambient - - 699 hp -
    Emissions - - Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2 U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV
    Engine Power - ISO 14396:2002 - - 786 hp -
    Gross Power - SAE J1995:2014 - - 766 hp -
    Net Power - SAE J1349:2011 - High Ambient - - 648 hp -
    Engine Power - ISO 14396: 2002 - - 752 hp -
    Peak Torque - Speed - - 2624 lb/ft -
    Note - - Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. -
    Net Power - Rated - ISO 9249/SAE J1349 - - - 265 hp
    Net Power (Rated) - ISO 9249 (DIN) - - - 268 mhp
    Note (4) - - - Machine Build Number 17A

    Weights
    Operating Weight 20640 lb 224647 lb - 65644 lb
    Operating Weight - LGP 21369 lb - - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - - Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.

    Transmission
    Drive Pumps 1 - - -
    Maximum Travel Speed - Forward 5.6 mile/h - - -
    Maximum Travel Speed - Reverse 6.2 mile/h - - -
    Track Motors 2 - - -
    Relief Valve Settings 7033 psi - - -
    Transmission Type - Cat Planetary Power Shift Cat Planetary Power Shift -
    Converter Drive - Forward 1 - 4.4 mile/h 4.5 mile/h -
    Converter Drive - Forward 2 - 7.7 mile/h 8.3 mile/h -
    Converter Drive - Forward 3 - 13.2 mile/h 14.2 mile/h -
    Converter Drive - Reverse 1 - 4.8 mile/h 4.9 mile/h -
    Converter Drive - Reverse 2 - 8.4 mile/h 9.1 mile/h -
    Converter Drive - Reverse 3 - 14.6 mile/h 15.5 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disabled -
    Direct Drive - Forward 2 - 8.1 mile/h 8.5 mile/h -
    Direct Drive - Forward 3 - 14.2 mile/h 15.2 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h 5.4 mile/h -
    Direct Drive - Reverse 2 - 8.9 mile/h 9.6 mile/h -
    Direct Drive - Reverse 3 - 15.6 mile/h 16.4 mile/h -
    Note - Travel speeds based on 45/65-45 L-5 46 ply tires. Travel speeds based on 45/65-45 L-5 46 ply tires. -
    Powertrain - - - Fully Automatic 4-Speed

    Hydraulic Controls
    Pump Output 17.2 gal/min - - -
    Relief Valve Settings 2988 psi - - -

    Ripper
    Type Parallelogram - - -
    Number of Shanks 3 - - -
    Height 6.5 in - - -
    Weight 1222 lb - - -
    Maximum Digging Depth 13.3 in - - -
    Maximum Reach - Ground Line 30.2 in - - -
    Overall Width 67.3 in - - -
    Maximum Ground Clearance Under Tip 17.6 in - - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - - -
    Track Gauge - LGP 69 in - - -
    Length - Track on Ground - LGP 91 in - - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - - -
    Shoe Width - LGP 26 in - - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - - -
    Track Gauge 63 in - - -
    Number of Rollers - Each Side 7 - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    Shoe Width - Standard 20 in - - -

    Undercarriage 
    Ground Pressure  5.7 psi - - -
    Length of Track on Ground  91 in - - -
    Number of Shoes - Each Side - Abrasion Undercarriage  36 - - -

    Service Refill Capacities
    Cooling System 5 gal (US) 53 gal (US) 54.9 gal (US) -
    Final Drive - Each - LGP 2.6 gal (US) - - -
    Crankcase - With Filter 2.8 gal (US) - - -
    Transmission - Hydraulic Tank 23.8 gal (US) - - -
    Fuel Tank 51.5 gal (US) - - 123 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - - -
    Fuel Tank - Standard - 413 gal (US) 286.6 gal (US) -
    Crankcase - 32 gal (US) 20 gal (US) -
    Transmission - 45 gal (US) 29.1 gal (US) -
    Differential - Final Drives - Front - 98 gal (US) 71.6 gal (US) -
    Differential - Final Drives - Rear - 90 gal (US) 68.9 gal (US) -
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - 77 gal (US) - -
    Note (1) - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo - -
    Hydraulic System - Implement and Hydraulic Fan - - 68.9 gal (US) -
    Hydraulic System - Steering and Braking - - 34.9 gal (US) -
    DEF Tank - - - 12 gal (US)

    Service Refill Capacities 
    Final Drives - Each Side  2.6 gal (US) - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential = The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    BLADE: Digging Depth - LGP 23.2 in - - -
    Track Gauge - LGP 67.9 in - - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - - -
    BLADE: Blade Height - LGP 39.8 in - - -
    BLADE: Blade Lift Height - LGP 30.2 in - - -
    Ground Clearance - LGP 13 in - - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - - -
    Overall Length - With Blade - LGP 169.6 in - - -
    Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) - - -
    BLADE: Maximum Tilt - LGP 17.7 in - - -
    BLADE: Maximum Angle (either side) - LGP 25° - - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - - -
    Dozer Height - Standard 109 in - - -
    Width of Dozer (standard shoes, no blade) - LGP 94.9 in - - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - - -
    Dozer Height - LGP 109 in - - -

    Dimensions 
    BLADE: Blade Capacity (SAE) - Standard  2.86 yd³ - - -
    Track Gauge - Standard  63 in - - -
    BLADE: Digging Depth - Standard  23.8 in - - -
    BLADE: Blade Lift Height - Standard  30.2 in - - -
    Ground Clearance - Standard  13 in - - -
    Overall Length - With Blade - Standard  170.7 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58° - - -
    BLADE: Blade Height - Standard  42.2 in - - -
    BLADE: Maximum Tilt - Standard  15.8 in - - -
    Note  Abrasion Undercarriage - - -
    BLADE: Blade Width - Standard  109.5 in - - -
    BLADE: Blade Width at Maximum Angle - Standard  103.8 in - - -
    BLADE: Maximum Angle (either side) - Standard  25° - - -

    Engine 
    Power Train  Hydrostatic - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 Level II - - -
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards ISO 3471:2008 and ISO 3449:2005 Level II Standards -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - - -
    Control Hydraulic - - -
    Rope Diameter - Optional 0.75 in - - -
    Drum Capacity - Optional Cable 195 ft - - -
    Maximum Line Speed - Full Drum 79 ft/min - - -
    Drum Capacity - Recommended Cable 277 ft - - -
    Winch Drive Hydraulic - - -
    Weight 1747 lb - - -
    Maximum Line Pull - Full Drum 20350 lb - - -
    Rope Diameter - Recommended 0.63 in - - -
    Maximum Line Speed - Bare Drum 50 ft/min - - -
    Speed Variable - - -
    Winch Length 35.63 in - - -
    Drum Diameter 8 in - - -
    Overall width 27.91 in - - -
    Drum Width 9.65 in - - -
    Throat Clearance 5.6 in - - -

    High Performance Winch
    Winch length 27.76 in - - -
    Rope diameter – optional 0.75 in - - -
    Maximum line speed – bare drum 131 ft/min - - -
    Maximum line pull – bare drum 40000 lb - - -
    Weight 1345 lb - - -
    Drum capacity – optional 256 ft - - -
    Maximum line speed – full drum 207 ft/min - - -
    Rope diameter – recommended 0.63 in - - -
    Winch drive Hydrostatic - - -
    Throat clearance 6.75 in - - -
    Drum diameter 10 in - - -
    Overall width 29.2 in - - -
    Drum width 10.8 in - - -
    Maximum line pull – full drum 25000 lb - - -
    Speed Variable - - -
    Drum capacity – recommended cable 371 ft - - -
    Control Hydraulic - - -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - 161 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 177 mm × 1760 mm (0.58 ft × 5.8 ft) 133 mm × 1535 mm (5.25 in × 60.4 in) -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 267 mm × 286 mm (0.88 ft × 0.94 ft) 210 mm × 188 mm (8.25 in × 7.4 in) -
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - - 82 gal/min -
    Relief Valve Setting - Bulldozer (Large Pump) - - 2700 psi -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - - 2920 psi -

    Axles
    Front - Fixed Fixed -
    Rear - Trunnion Trunnion -
    Oscillation Angle - - 8.5 ° -

    Brakes
    Brakes - Meets ISO 3540:2011 Meets ISO 3540:2011 -

    Blades
    Blade Capacities - 30.5 to 44.8 m3 (40 to 58.6 yd3) - -

    Dimensions (Approximate)
    Height - Top of ROPS - 18.25 ft 17.2 ft -
    Height - Top of Exhaust Pipe - 17.17 ft 16.6 ft -
    Height - Top of Hood - 13 ft 12.7 ft -
    Ground Clearance - 27 in 2 ft -
    Centerline of Front Axle to Hitch - 9.67 ft 7.5 ft -
    Centerline of Rear Axle to Edge of Bumper - 13.75 ft 12.5 ft -
    Wheel Base - 19.25 ft 15.1 ft -
    Length - With Blade on Ground - 44 ft 36.5 ft -

    Hydraulic System - Steering
    Steering System - Pump - Piston, variable displacement Piston, variable displacement -
    Minimum Turning Radius - Over Blade - 31 ft 34 ft -
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing -
    Total Steering Angle - 86 degrees 35 ° -
    Relief Valve Setting - 5004 psi 4500 psi -
    Maximum Flow - - 94.3 gal/min -

    Operating Specifications
    Operating Weight - 224647 lb 165089 lb -
    Blade Capacity Range - - 20.8 yd³ -

    Sound Performance Levels
    Sound Performance - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 116 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)* - - 114 dB(A) -
    Note (1) - - *Sound suppression equipped -
    Note (2) - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (3) - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (4) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -

    Sound Performance - Tier 2
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 116 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)* - - 114 dB(A) -
    Note (1) - - *Sound suppression equipped -
    Note (2) - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (3) - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (4) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -

    Standard SU
    Operating Weight - - - 65644 lb
    Ground Pressure - - - 10 psi
    Width of Standard Shoe - - - 24 in
    Blade - - - Semi-Universal (SU)
    Blade Capacity - - - 10 yd³

    LGP S
    Operating Weight - - - 63220 lb
    Ground Pressure - - - 6 psi
    Width of Standard Shoe - - - 36 in
    Blade - - - Straight (S)
    Blade Capacity - - - 8 yd³

    Waste Handler
    Operating Weight - - - 62035 lb
    Ground Pressure - - - 10 psi
    Width of Standard Shoe - - - 24 in
    Blade - - - Universal Landfill (U)
    Blade Capacity - - - 22 yd³

    Sustainability
    Recyclability - - - 98%

    Note (2) - - - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.
    Add a Similar Product: