CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    854 Wheel Dozer
    View Product Remove
    D7 Dozer
    View Product Remove
    824 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 Cat C32B Cat C9.3B Cat® C15 
    Power - Net 104 hp - 265 hp -
    Displacement 220 in³ 1958 in² - 927.6 in³
    Net Power - 2,200 rpm - SAE J1349 104 hp - - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp - - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Net torque rise meets SAE J139. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - 814 hp - -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - 900 hp - -
    Gross Power - 907 hp - -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - 907 hp - -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - 823 hp - -
    Rated Speed - 1750 r/min - 1800 r/min
    Bore - 5.7 in - 5.4 in
    Stroke - 6.4 in - 6.7 in
    Peak Torque - 1,200 rpm - 3139 lb/ft - -
    Torque Rise - 30 % - 33%
    Note (3) - No engine derating required up to 3050 m (10,000 ft) altitude. Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. -
    Net Power - Rated - ISO 9249/SAE J1349 - - 265 hp -
    Net Power (Rated) - ISO 9249 (DIN) - - 268 mhp -
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV -
    Note (4) - - Machine Build Number 17A -
    Net Power - SAE J1349:2011 - - - 405 hp
    Net Power - ISO 9249:2007 - - - 405 hp
    Engine Power - ISO 14396:2002 - - - 426 hp
    Gross Power - SAE J1995:2014 - - - 434 hp
    Peak Net Torque (1,300 rpm) - - - 1479 lbf·ft
    Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V) - - - 9298 ft
    Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA) - - - 9098 ft
    High Idle Speed - - - 2300 r/min
    Low Idle Speed - - - 800 r/min

    Weights
    Operating Weight 20640 lb 224647 lb 65644 lb -
    Operating Weight - LGP 21369 lb - - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. -

    Transmission
    Drive Pumps 1 - - -
    Maximum Travel Speed - Forward 5.6 mile/h - - -
    Maximum Travel Speed - Reverse 6.2 mile/h - - -
    Track Motors 2 - - -
    Relief Valve Settings 7033 psi - - -
    Transmission Type - Cat Planetary Power Shift - Cat planetary - powershift - ECPC
    Converter Drive - Forward 1 - 4.4 mile/h - -
    Converter Drive - Forward 2 - 7.7 mile/h - -
    Converter Drive - Forward 3 - 13.2 mile/h - -
    Converter Drive - Reverse 1 - 4.8 mile/h - -
    Converter Drive - Reverse 2 - 8.4 mile/h - -
    Converter Drive - Reverse 3 - 14.6 mile/h - -
    Direct Drive - Forward 1 - Lock-up disabled - -
    Direct Drive - Forward 2 - 8.1 mile/h - -
    Direct Drive - Forward 3 - 14.2 mile/h - -
    Direct Drive - Reverse 1 - 5 mile/h - -
    Direct Drive - Reverse 2 - 8.9 mile/h - -
    Direct Drive - Reverse 3 - 15.6 mile/h - -
    Note - Travel speeds based on 45/65-45 L-5 46 ply tires. - -
    Powertrain - - Fully Automatic 4-Speed -
    Forward - 1 - - - 3.8 mile/h
    Forward - 2 - - - 6.9 mile/h
    Forward - 3 - - - 12.2 mile/h
    Forward - 4 - - - 21.6 mile/h
    Reverse - 1 - - - 4.3 mile/h
    Reverse - 2 - - - 7.8 mile/h
    Reverse - 3 - - - 13.9 mile/h
    Reverse - 4 - - - 24.7 mile/h

    Hydraulic Controls
    Pump Output 17.2 gal/min - - -
    Relief Valve Settings 2988 psi - - -

    Ripper
    Type Parallelogram - - -
    Number of Shanks 3 - - -
    Height 6.5 in - - -
    Weight 1222 lb - - -
    Maximum Digging Depth 13.3 in - - -
    Maximum Reach - Ground Line 30.2 in - - -
    Overall Width 67.3 in - - -
    Maximum Ground Clearance Under Tip 17.6 in - - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - - -
    Track Gauge - LGP 69 in - - -
    Length - Track on Ground - LGP 91 in - - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - - -
    Shoe Width - LGP 26 in - - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - - -
    Track Gauge 63 in - - -
    Number of Rollers - Each Side 7 - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    Shoe Width - Standard 20 in - - -

    Undercarriage 
    Ground Pressure  5.7 psi - - -
    Length of Track on Ground  91 in - - -
    Number of Shoes - Each Side - Abrasion Undercarriage  36 - - -

    Service Refill Capacities
    Cooling System 5 gal (US) 53 gal (US) - 30.6 gal (US)
    Final Drive - Each - LGP 2.6 gal (US) - - -
    Crankcase - With Filter 2.8 gal (US) - - -
    Transmission - Hydraulic Tank 23.8 gal (US) - - -
    Fuel Tank 51.5 gal (US) - 123 gal (US) 206.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - - -
    Fuel Tank - Standard - 413 gal (US) - -
    Crankcase - 32 gal (US) - -
    Transmission - 45 gal (US) - 17.4 gal (US)
    Differential - Final Drives - Front - 98 gal (US) - 26.4 gal (US)
    Differential - Final Drives - Rear - 90 gal (US) - 29.1 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - 77 gal (US) - -
    Note (1) - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo - All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative
    DEF Tank - - 12 gal (US) -
    Engine Crankcase - - - 9 gal (US)
    Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) - - - 8.5 gal (US)
    Hydraulic Tank Only - - - 35.4 gal (US)
    Hydraulic System - Implement/Steering - - - 56.5 gal (US)

    Service Refill Capacities 
    Final Drives - Each Side  2.6 gal (US) - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential = The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    BLADE: Digging Depth - LGP 23.2 in - - -
    Track Gauge - LGP 67.9 in - - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - - -
    BLADE: Blade Height - LGP 39.8 in - - -
    BLADE: Blade Lift Height - LGP 30.2 in - - -
    Ground Clearance - LGP 13 in - - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - - -
    Overall Length - With Blade - LGP 169.6 in - - -
    Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) - - -
    BLADE: Maximum Tilt - LGP 17.7 in - - -
    BLADE: Maximum Angle (either side) - LGP 25° - - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - - -
    Dozer Height - Standard 109 in - - -
    Width of Dozer (standard shoes, no blade) - LGP 94.9 in - - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - - -
    Dozer Height - LGP 109 in - - -

    Dimensions 
    BLADE: Blade Capacity (SAE) - Standard  2.86 yd³ - - -
    Track Gauge - Standard  63 in - - -
    BLADE: Digging Depth - Standard  23.8 in - - -
    BLADE: Blade Lift Height - Standard  30.2 in - - -
    Ground Clearance - Standard  13 in - - -
    Overall Length - With Blade - Standard  170.7 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58° - - -
    BLADE: Blade Height - Standard  42.2 in - - -
    BLADE: Maximum Tilt - Standard  15.8 in - - -
    Note  Abrasion Undercarriage - - -
    BLADE: Blade Width - Standard  109.5 in - - -
    BLADE: Blade Width at Maximum Angle - Standard  103.8 in - - -
    BLADE: Maximum Angle (either side) - Standard  25° - - -

    Engine 
    Power Train  Hydrostatic - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 Level II - - -
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards - -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - - -
    Control Hydraulic - - -
    Rope Diameter - Optional 0.75 in - - -
    Drum Capacity - Optional Cable 195 ft - - -
    Maximum Line Speed - Full Drum 79 ft/min - - -
    Drum Capacity - Recommended Cable 277 ft - - -
    Winch Drive Hydraulic - - -
    Weight 1747 lb - - -
    Maximum Line Pull - Full Drum 20350 lb - - -
    Rope Diameter - Recommended 0.63 in - - -
    Maximum Line Speed - Bare Drum 50 ft/min - - -
    Speed Variable - - -
    Winch Length 35.63 in - - -
    Drum Diameter 8 in - - -
    Overall width 27.91 in - - -
    Drum Width 9.65 in - - -
    Throat Clearance 5.6 in - - -

    High Performance Winch
    Winch length 27.76 in - - -
    Rope diameter – optional 0.75 in - - -
    Maximum line speed – bare drum 131 ft/min - - -
    Maximum line pull – bare drum 40000 lb - - -
    Weight 1345 lb - - -
    Drum capacity – optional 256 ft - - -
    Maximum line speed – full drum 207 ft/min - - -
    Rope diameter – recommended 0.63 in - - -
    Winch drive Hydrostatic - - -
    Throat clearance 6.75 in - - -
    Drum diameter 10 in - - -
    Overall width 29.2 in - - -
    Drum width 10.8 in - - -
    Maximum line pull – full drum 25000 lb - - -
    Speed Variable - - -
    Drum capacity – recommended cable 371 ft - - -
    Control Hydraulic - - -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - 161 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 177 mm × 1760 mm (0.58 ft × 5.8 ft) - 120 mm × 1070 mm (4.7 in × 42.1 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 267 mm × 286 mm (0.88 ft × 0.94 ft) - 140 mm × 230 mm (5.5 in × 9.1 in)
    Pump Flow at 1,800 rpm - - - 30.9 gal/min
    Main Relief Pressure - - - 3771 psi
    Maximum Supply Pressure - - - 3495 psi

    Axles
    Front - Fixed - Planetary – Fixed
    Rear - Trunnion - Planetary – Oscillating
    Oscillation Angle - - - ±11°

    Brakes
    Brakes - Meets ISO 3540:2011 - -

    Blades
    Blade Capacities - 30.5 to 44.8 m3 (40 to 58.6 yd3) - -

    Dimensions (Approximate)
    Height - Top of ROPS - 18.25 ft - -
    Height - Top of Exhaust Pipe - 17.17 ft - -
    Height - Top of Hood - 13 ft - 10.5 ft
    Ground Clearance - 27 in - 1.8 ft
    Centerline of Front Axle to Hitch - 9.67 ft - 6.1 ft
    Centerline of Rear Axle to Edge of Bumper - 13.75 ft - 9.3 ft
    Wheel Base - 19.25 ft - 12.1 ft
    Length - With Blade on Ground - 44 ft - -
    Height to Top of Beacon - - - 14.5 ft
    Height - Top of Exhaust Stack - - - 14.2 ft
    Ground Clearance - Bumper - - - 2.8 ft
    Length - With Blade on Ground - Straight Blade - - - 27.6 ft
    Ground Clearance to Trunnion - - - 1.45 ft
    Height - Top of Cab - - - 13.5 ft
    Width Over Guardrails - - - 10.94 ft

    Hydraulic System - Steering
    Steering System - Pump - Piston, variable displacement - Variable displacement piston
    Minimum Turning Radius - Over Blade - 31 ft - -
    Steering System - Circuit - Pilot, load sensing - Pilot operated, load sensing
    Total Steering Angle - 86 degrees - -
    Relief Valve Setting - 5004 psi - -
    Bore - - - 4.5 in
    Stroke - - - 22.7 in
    Max Flow at 1,800 rpm - - - 44.9 gal/min
    Relief Valve Setting - Steering - - - 3481 psi
    Vehicle Articulation Angle - - - 86°

    Operating Specifications
    Operating Weight - 224647 lb - -
    Operating Weight – Straight Blade (Tier 4 Final/Stage V) - - - 74966 lb
    Blade Capacity Range - - - 5.1-16.2 m3 (6.6-21.2 yd3)

    Sound Performance Levels
    Sound Performance - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was - -

    Standard SU
    Operating Weight - - 65644 lb -
    Ground Pressure - - 10 psi -
    Width of Standard Shoe - - 24 in -
    Blade - - Semi-Universal (SU) -
    Blade Capacity - - 10 yd³ -

    LGP S
    Operating Weight - - 63220 lb -
    Ground Pressure - - 6 psi -
    Width of Standard Shoe - - 36 in -
    Blade - - Straight (S) -
    Blade Capacity - - 8 yd³ -

    Waste Handler
    Operating Weight - - 62035 lb -
    Ground Pressure - - 10 psi -
    Width of Standard Shoe - - 24 in -
    Blade - - Universal Landfill (U) -
    Blade Capacity - - 22 yd³ -

    Sustainability
    Recyclability - - 98% -

    Note (2) - - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. -

    Braking System
    Parking Brake - - - Drum and shoe, spring applied, hydraulic released
    Brakes - - - Multi-disc wet (enclosed) 4 WHL

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) - - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 113 dB(A)
    Operator Sound Pressure Level (ISO 6396:2008)* - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008)** - - - 110 dB(A)
    Note (1) - - - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
    Note (2) - - - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
    Note (3) - - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
    Note (5) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) - - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 113 dB(A)
    Operator Sound Pressure Level (ISO 6396:2008)* - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008)** - - - 110 dB(A)
    Note (1) - - - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
    Note (2) - - - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
    Note (3) - - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
    Note (5) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

    Straight Blade
    Capacity - - - 6.6 yd³
    Width Over End Bits - - - 177.4 in
    Height - - - 48.4 in
    Dig Depth - - - 17.6 in
    Ground Clearance - - - 41.6 in
    Maximum Tilt - - - 45.9 in
    Turning Radius – Outside Corner of Blade - - - 23.7 ft
    Turning Radius – Inside Corner of Blade - - - 10.15 ft

    Straight Push Plate Blade
    Capacity - - - 6.6 yd³
    Width Over End Bits - - - 177.4 in
    Height - - - 48.4 in
    Dig Depth - - - 17.6 in
    Ground Clearance - - - 41.6 in
    Maximum Tilt - - - 45.9 in
    Turning Radius – Outside Corner of Blade - - - 23.2 ft
    Turning Radius – Inside Corner of Blade - - - 10.2 in³

    Semi-Universal Blade
    Capacity - - - 10 yd³
    Width Over End Bits - - - 174.1 in
    Height - - - 61.1 in
    Dig Depth - - - 18.8 in
    Ground Clearance - - - 42 in
    Maximum Tilt - - - 44.1 in
    Turning Radius – Outside Corner of Blade - - - 23.8 ft
    Turning Radius – Inside Corner of Blade - - - 10.8 ft

    Universal Blade
    Capacity - - - 10 yd³
    Width Over End Bits - - - 171.3 in
    Height - - - 53.1 in
    Dig Depth - - - 18.1 in
    Ground Clearance - - - 41.4 in
    Maximum Tilt - - - 44.6 in
    Turning Radius – Outside Corner of Blade - - - 23.9 ft
    Turning Radius – Inside Corner of Blade - - - 11.3 ft

    Coal Blade
    Capacity - - - 21.2 yd³
    Width Over End Bits - - - 189 in
    Height - - - 68.7 in
    Dig Depth - - - 18.6 in
    Ground Clearance - - - 42.2 in
    Maximum Tilt - - - 48.9 in
    Turning Radius – Outside Corner of Blade - - - 24.9 ft
    Turning Radius – Inside Corner of Blade - - - 11.4 ft

    Extended Wear Blade
    Capacity - - - 10.6 yd³
    Width Over End Bits - - - 171.6 in
    Height - - - 53.1 in
    Dig Depth - - - 18.1 in
    Ground Clearance - - - 41.4 in
    Maximum Tilt - - - 44.6 in
    Turning Radius – Outside Corner of Blade - - - 23.9 ft
    Turning Radius – Inside Corner of Blade - - - 11.4 ft
    Add a Similar Product: