Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Net torque rise meets SAE J139.
-
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
-
907 hp
-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
-
823 hp
-
Rated Speed
-
1750 r/min
-
Bore
-
5.7 in
-
Stroke
-
6.4 in
-
Peak Torque - 1,200 rpm
-
3139 lb/ft
-
Torque Rise
-
30 %
-
Note (3)
-
No engine derating required up to 3050 m (10,000 ft) altitude.
-
Weights
Operating Weight
20640 lb
224647 lb
-
Operating Weight - LGP
21369 lb
-
-
Operating Weight - LGP, 762 mm/30 in
21810 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
-
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Track Motors
2
-
-
Relief Valve Settings
7033 psi
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Converter Drive - Forward 1
-
4.4 mile/h
-
Converter Drive - Forward 2
-
7.7 mile/h
-
Converter Drive - Forward 3
-
13.2 mile/h
-
Converter Drive - Reverse 1
-
4.8 mile/h
-
Converter Drive - Reverse 2
-
8.4 mile/h
-
Converter Drive - Reverse 3
-
14.6 mile/h
-
Direct Drive - Forward 1
-
Lock-up disabled
-
Direct Drive - Forward 2
-
8.1 mile/h
-
Direct Drive - Forward 3
-
14.2 mile/h
-
Direct Drive - Reverse 1
-
5 mile/h
-
Direct Drive - Reverse 2
-
8.9 mile/h
-
Direct Drive - Reverse 3
-
15.6 mile/h
-
Note
-
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Digging Depth
13.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Overall Width
67.3 in
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Undercarriage
Ground Pressure - LGP
4.5 psi
-
-
Track Gauge - LGP
69 in
-
-
Length - Track on Ground - LGP
91 in
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
-
-
Ground Pressure - LGP, 762 mm (30 in)
3.9 psi
-
-
Length - Track on Ground - LGP, 762 mm (30 in)
91 in
-
-
Shoe Width - LGP
26 in
-
-
Shoe Width - LGP, 762 mm (30 in)
30 in
-
-
Track Gauge
63 in
-
-
Number of Rollers - Each Side
7
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
Shoe Width - Standard
20 in
-
-
Undercarriage
Ground Pressure
5.7 psi
-
-
Length of Track on Ground
91 in
-
-
Number of Shoes - Each Side - Abrasion Undercarriage
36
-
-
Service Refill Capacities
Cooling System
5 gal (US)
53 gal (US)
-
Final Drive - Each - LGP
2.6 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Fuel Tank
51.5 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
Fuel Tank - Standard
-
413 gal (US)
-
Crankcase
-
32 gal (US)
-
Transmission
-
45 gal (US)
-
Differential - Final Drives - Front
-
98 gal (US)
-
Differential - Final Drives - Rear
-
90 gal (US)
-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
-
77 gal (US)
-
Note (1)
-
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo
-
Service Refill Capacities
Final Drives - Each Side
2.6 gal (US)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential =
-
Dimensions
BLADE: Blade Width - LGP
126.7 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
BLADE: Digging Depth - LGP
23.2 in
-
-
Track Gauge - LGP
67.9 in
-
-
BLADE: Blade Capacity (SAE) - LGP
3.06 yd³
-
-
BLADE: Blade Width at Maximum Angle - LGP
115.8 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
Ground Clearance - LGP, 762 mm (30 in)
13 in
-
-
BLADE: Blade Height - LGP
39.8 in
-
-
BLADE: Blade Lift Height - LGP
30.2 in
-
-
Ground Clearance - LGP
13 in
-
-
Overall Length - With Blade - LGP, 762 mm (30 in)
169.6 in
-
-
Overall Length - With Blade - LGP
169.6 in
-
-
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
-
-
BLADE: Maximum Tilt - LGP
17.7 in
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
Length of Basic Dozer (without blade) - Standard
128.7 in
-
-
Dozer Height - Standard
109 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
94.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
103.5 in
-
-
Length of Basic Dozer (without blade) - LGP
128.7 in
-
-
Dozer Height - LGP, 762 mm (30 in)
109 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
83 in
-
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
128.7 in
-
-
Dozer Height - LGP
109 in
-
-
Dimensions
BLADE: Blade Capacity (SAE) - Standard
2.86 yd³
-
-
Track Gauge - Standard
63 in
-
-
BLADE: Digging Depth - Standard
23.8 in
-
-
BLADE: Blade Lift Height - Standard
30.2 in
-
-
Ground Clearance - Standard
13 in
-
-
Overall Length - With Blade - Standard
170.7 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Blade Height - Standard
42.2 in
-
-
BLADE: Maximum Tilt - Standard
15.8 in
-
-
Note
Abrasion Undercarriage
-
-
BLADE: Blade Width - Standard
109.5 in
-
-
BLADE: Blade Width at Maximum Angle - Standard
103.8 in
-
-
BLADE: Maximum Angle (either side) - Standard
25°
-
-
Engine
Power Train
Hydrostatic
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level II
-
-
ROPS/FOPS
-
ISO 3471:2008 and ISO 3449:2005 Level II Standards
-
Retrieval Winch
Maximum Line Pull - Bare Drum
32150 lb
-
-
Control
Hydraulic
-
-
Rope Diameter - Optional
0.75 in
-
-
Drum Capacity - Optional Cable
195 ft
-
-
Maximum Line Speed - Full Drum
79 ft/min
-
-
Drum Capacity - Recommended Cable
277 ft
-
-
Winch Drive
Hydraulic
-
-
Weight
1747 lb
-
-
Maximum Line Pull - Full Drum
20350 lb
-
-
Rope Diameter - Recommended
0.63 in
-
-
Maximum Line Speed - Bare Drum
50 ft/min
-
-
Speed
Variable
-
-
Winch Length
35.63 in
-
-
Drum Diameter
8 in
-
-
Overall width
27.91 in
-
-
Drum Width
9.65 in
-
-
Throat Clearance
5.6 in
-
-
High Performance Winch
Winch length
27.76 in
-
-
Rope diameter – optional
0.75 in
-
-
Maximum line speed – bare drum
131 ft/min
-
-
Maximum line pull – bare drum
40000 lb
-
-
Weight
1345 lb
-
-
Drum capacity – optional
256 ft
-
-
Maximum line speed – full drum
207 ft/min
-
-
Rope diameter – recommended
0.63 in
-
-
Winch drive
Hydrostatic
-
-
Throat clearance
6.75 in
-
-
Drum diameter
10 in
-
-
Overall width
29.2 in
-
-
Drum width
10.8 in
-
-
Maximum line pull – full drum
25000 lb
-
-
Speed
Variable
-
-
Drum capacity – recommended cable
371 ft
-
-
Control
Hydraulic
-
-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
161 gal/min
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
177 mm × 1760 mm (0.58 ft × 5.8 ft)
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
-
267 mm × 286 mm (0.88 ft × 0.94 ft)
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Brakes
Brakes
-
Meets ISO 3540:2011
-
Blades
Blade Capacities
-
30.5 to 44.8 m3 (40 to 58.6 yd3)
-
Dimensions (Approximate)
Height - Top of ROPS
-
18.25 ft
-
Height - Top of Exhaust Pipe
-
17.17 ft
-
Height - Top of Hood
-
13 ft
-
Ground Clearance
-
27 in
-
Centerline of Front Axle to Hitch
-
9.67 ft
-
Centerline of Rear Axle to Edge of Bumper
-
13.75 ft
-
Wheel Base
-
19.25 ft
-
Length - With Blade on Ground
-
44 ft
-
Hydraulic System - Steering
Steering System - Pump
-
Piston, variable displacement
-
Minimum Turning Radius - Over Blade
-
31 ft
-
Steering System - Circuit
-
Pilot, load sensing
-
Total Steering Angle
-
86 degrees
-
Relief Valve Setting
-
5004 psi
-
Operating Specifications
Operating Weight
-
224647 lb
-
Sound Performance Levels
Sound Performance
-
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was
