CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    814 Wheel Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 - Cat C32B
    Power - Net 104 HP - -
    Displacement 220 in³ - 1958 in²
    Net Power - 2,200 rpm - SAE J1349 104 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 HP - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
    Power Train Hydrostatic - -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - Net torque rise meets SAE J139.
    Gross Power - - 907 HP
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 HP
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 HP
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 HP
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 HP
    Rated Speed - - 1750 r/min
    Bore - - 5.7 in
    Stroke - - 6.4 in
    Peak Torque - 1,200 rpm - - 3139 lb/ft
    Torque Rise - - 30 %
    Note (3) - - No engine derating required up to 3050 m (10,000 ft) altitude.

    Weights
    Operating Weight 20640 lb - 224647 lb
    Operating Weight - LGP 21369 lb - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Track Motors 2 - -
    Relief Valve Settings 7033 psi - -
    Transmission Type - Cat Planetary Power Shift Cat Planetary Power Shift
    Forward - 1 - 3.7 mile/h -
    Forward - 2 - 6.5 mile/h -
    Forward - 3 - 11.2 mile/h -
    Forward - 4 - 19.4 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.3 mile/h -
    Reverse - 3 - 12.8 mile/h -
    Reverse - 4 - 22.1 mile/h -
    Converter Drive - Forward 1 - - 4.4 mile/h
    Converter Drive - Forward 2 - - 7.7 mile/h
    Converter Drive - Forward 3 - - 13.2 mile/h
    Converter Drive - Reverse 1 - - 4.8 mile/h
    Converter Drive - Reverse 2 - - 8.4 mile/h
    Converter Drive - Reverse 3 - - 14.6 mile/h
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Forward 2 - - 8.1 mile/h
    Direct Drive - Forward 3 - - 14.2 mile/h
    Direct Drive - Reverse 1 - - 5 mile/h
    Direct Drive - Reverse 2 - - 8.9 mile/h
    Direct Drive - Reverse 3 - - 15.6 mile/h
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires.

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Digging Depth 13.3 in - -
    Maximum Reach - Ground Line 30.2 in - -
    Overall Width 67.3 in - -
    Maximum Ground Clearance Under Tip 17.6 in - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - -
    Track Gauge - LGP 69 in - -
    Length - Track on Ground - LGP 91 in - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - -
    Shoe Width - LGP 26 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge 63 in - -
    Number of Rollers - Each Side 7 - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Ground Pressure 5.7 psi - -
    Length of Track on Ground 91 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 36 - -
    Shoe Width - Standard 20 in - -

    Service Refill Capacities
    Cooling System 5 gal (US) - 53 gal (US)
    Final Drive - Each - LGP 2.6 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 132.1 gal (US) -
    Final Drives - Each Side 2.6 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Diesel Exhaust Fluid Tank - 4.2 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) -
    Engine Crankcase - 5.3 gal (US) -
    Transmission - 13.2 gal (US) 45 gal (US)
    Differential - Final Drives - Front - 17.2 gal (US) 98 gal (US)
    Differential - Final Drives - Rear - 17.2 gal (US) 90 gal (US)
    Hydraulic System - Implement/Steering - 34.1 gal (US) -
    Hydraulic Tank Only - 19.8 gal (US) -
    Fuel Tank - Standard - - 413 gal (US)
    Crankcase - - 32 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US)
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Digging Depth - LGP 23.2 in - -
    Track Gauge - LGP 67.9 in - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 39.8 in - -
    BLADE: Blade Lift Height - LGP 30.2 in - -
    Ground Clearance - LGP 13 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - -
    Overall Length - With Blade - LGP 169.6 in - -
    Note Abrasion Undercarriage - -
    BLADE: Maximum Tilt - LGP 17.7 in - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    BLADE: Blade Capacity (SAE) - Standard 2.86 yd³ - -
    Track Gauge - Standard 63 in - -
    BLADE: Digging Depth - Standard 23.8 in - -
    BLADE: Blade Lift Height - Standard 30.2 in - -
    Ground Clearance - Standard 13 in - -
    Overall Length - With Blade - Standard 170.7 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Blade Height - Standard 42.2 in - -
    BLADE: Maximum Tilt - Standard 15.8 in - -
    BLADE: Blade Width - Standard 109.5 in - -
    BLADE: Blade Width at Maximum Angle - Standard 103.8 in - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - -
    Dozer Height - Standard 109 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - -
    Dozer Height - LGP 109 in - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level II - -
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - -
    Control Hydraulic - -
    Rope Diameter - Optional 0.75 in - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Winch Drive Hydraulic - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 20350 lb - -
    Rope Diameter - Recommended 0.63 in - -
    Maximum Line Speed - Bare Drum 50 ft/min - -
    Speed Variable - -
    Winch Length 35.63 in - -
    Drum Diameter 8 in - -
    Overall width 27.91 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -

    High Performance Winch
    Winch length 27.76 in - -
    Rope diameter – optional 0.75 in - -
    Maximum line speed – bare drum 131 ft/min - -
    Maximum line pull – bare drum 40000 lb - -
    Weight 1345 lb - -
    Drum capacity – optional 256 ft - -
    Maximum line speed – full drum 207 ft/min - -
    Rope diameter – recommended 0.63 in - -
    Winch drive Hydrostatic - -
    Throat clearance 6.75 in - -
    Drum diameter 10 in - -
    Overall width 29.2 in - -
    Drum width 10.8 in - -
    Maximum line pull – full drum 25000 lb - -
    Speed Variable - -
    Drum capacity – recommended cable 371 ft - -
    Control Hydraulic - -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 -
    Net Power (SAE J1349:2011) - 249 HP -
    Net Power (ISO 9249:2007) - 249 HP -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - 2200 r/min -
    Gross Power (SAE J1995:2014) - 284 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 902 lb/ft -
    Torque Rise - 52% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -
    Low Idle Speed - 800 r/min -
    Maximum Altitude without Derating - 9842.5 ft -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb -

    Scoops
    Chip Scoop Doze Capacity - 37.9 yd³ -
    Chip Scoop Carry Capacity - 19 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - 2200 r/min -
    Net Power (SAE J1349:2011) - 249 HP -
    Gross Power (SAE J1995:2014) - 286 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 749 lb/ft -
    Torque Rise - 26% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 23.5 gal/min -
    Relief Valve Setting - Lift/Tilt - 3190 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) 177 mm × 1760 mm (0.58 ft × 5.8 ft)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System - Open center, fixed displacement gear -
    Pilot Relief Valve Setting - 3046 psi -
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gal/min
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 267 mm × 286 mm (0.88 ft × 0.94 ft)

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Variable displacement piston Piston, variable displacement
    Maximum Flow at 2,200 rpm - 38.8 gal/min -
    Relief Valve Setting - Steering - 4003 psi -
    Total Steering Angle - 72° 86 degrees
    Steering Cycle Times - High Idle - 3 s -
    Steering Cycle Times - Low Idle - 8.2 s -
    Minimum Turning Radius - Over Blade - - 31 ft
    Relief Valve Setting - - 5004 psi

    Axles
    Front - Planetary – Fixed Fixed
    Rear - Planetary – Oscillating Trunnion
    Oscillation Angle - ±10° -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft -
    Height - Top of Cab - 12.1 ft -
    Height - Top of Exhaust Pipe - 11.3 ft 17.17 ft
    Height - Top of Hood - 8.7 ft 13 ft
    Height to Top of Radiator Guard - 8 ft -
    Ground Clearance to Hitch - 1.4 ft -
    Ground Clearance to Transmission Guard - 1.4 ft -
    Ground Clearance to Bottom of Bumper - 2.3 ft -
    Centerline of Rear Axle to Bumper - 6.5 ft -
    Centerline of Front Axle to Hitch - 5.5 ft 9.67 ft
    Wheel Base - 11 ft 19.25 ft
    Width over Platform - 10.3 ft -
    Overall Length to Front Tire - 21 ft -
    Overall Machine Length with Straight Blade - 23.6 ft -
    Overall Machine Length with Coal Blade - 25.5 ft -
    Height - Top of ROPS - - 18.25 ft
    Ground Clearance - - 27 in
    Centerline of Rear Axle to Edge of Bumper - - 13.75 ft
    Length - With Blade on Ground - - 44 ft

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 111 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Brakes
    Brakes - - Meets ISO 3540:2011

    Blades
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3)

    Operating Specifications
    Operating Weight - - 224647 lb

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was
    Add a Similar Product: