CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    814 Wheel Dozer
    View Product Remove
    D11 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 - -
    Power - Net 104 HP - -
    Displacement 220 in³ - -
    Net Power - 2,200 rpm - SAE J1349 104 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 HP - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - -
    Power Train Hydrostatic - -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - -

    Weights
    Operating Weight 20640 lb - 229800 lb
    Operating Weight - LGP 21369 lb - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
    Operating Weight - Carrydozer - - 250665 lb

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Track Motors 2 - -
    Relief Valve Settings 7033 psi - -
    Transmission Type - Cat Planetary Power Shift -
    Forward - 1 - 3.7 mile/h -
    Forward - 2 - 6.5 mile/h -
    Forward - 3 - 11.2 mile/h -
    Forward - 4 - 19.4 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.3 mile/h -
    Reverse - 3 - 12.8 mile/h -
    Reverse - 4 - 22.1 mile/h -
    1.0 Forward - - 2.5 mile/h
    2.0 Forward - - 4.4 mile/h
    3.0 Forward - - 7.6 mile/h
    1.0 Reverse - - 3 mile/h
    2.0 Reverse - - 5.3 mile/h
    3.0 Reverse - - 9.1 mile/h
    Drawbar Pull - 3 Forward - - 46250 ft·lbf
    Drawbar Pull - 1 Forward - - 148200 ft·lbf
    Drawbar Pull - 2 Forward - - 82300 ft·lbf

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -
    Pump Type - - Variable displacement piston pump
    Combined Pump Output - Implement - - 177 gal/min

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Digging Depth 13.3 in - -
    Maximum Reach - Ground Line 30.2 in - -
    Overall Width 67.3 in - -
    Maximum Ground Clearance Under Tip 17.6 in - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - -
    Track Gauge - LGP 69 in - -
    Length - Track on Ground - LGP 91 in - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - -
    Shoe Width - LGP 26 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge 63 in - 114 in
    Number of Rollers - Each Side 7 - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Ground Pressure 5.7 psi - -
    Length of Track on Ground 91 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 36 - -
    Shoe Width - Standard 20 in - -
    Shoe Type - - Extreme Service
    Width - Shoe - - 28 in
    Width - Shoe - CD - - 36 in
    Shoes/Side - - 41
    Grouser Height - - 4 in
    Pitch - - 12.5 in
    Ground Clearance* - - 30.6 in
    Length - Track on Ground - - 175 in
    Ground Contact Area - - 9781 in²
    Ground Contact Area - CD - - 12605 in²
    Track Rollers/Side - - 8
    Number of Carrier Rollers - - 1 per side (optional)

    Service Refill Capacities
    Cooling System 5 gal (US) - 46.8 gal (US)
    Final Drive - Each - LGP 2.6 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 132.1 gal (US) -
    Final Drives - Each Side 2.6 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Diesel Exhaust Fluid Tank - 4.2 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) -
    Engine Crankcase - 5.3 gal (US) 35.1 gal (US)
    Transmission - 13.2 gal (US) -
    Differential - Final Drives - Front - 17.2 gal (US) -
    Differential - Final Drives - Rear - 17.2 gal (US) -
    Hydraulic System - Implement/Steering - 34.1 gal (US) -
    Hydraulic Tank Only - 19.8 gal (US) -
    Cooling System Refill - Tier 2 Equivalent Engine - - 41.7 gal (US)
    Power Train - - 120 gal (US)
    Power Train - Refill Volume - - 103.3 gal (US)
    Final Drive - Each - - 12.4 gal (US)
    Roller Frames - Each - - 24.8 gal (US)
    Hydraulic Tank - - 42.2 gal (US)
    Hydraulic System Tank and Chassis - - 64.7 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Standard) - - 117.6 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - - 143.4 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -
    Note (1) - - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Digging Depth - LGP 23.2 in - -
    Track Gauge - LGP 67.9 in - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 39.8 in - -
    BLADE: Blade Lift Height - LGP 30.2 in - -
    Ground Clearance - LGP 13 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - -
    Overall Length - With Blade - LGP 169.6 in - -
    Note Abrasion Undercarriage - -
    BLADE: Maximum Tilt - LGP 17.7 in - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    BLADE: Blade Capacity (SAE) - Standard 2.86 yd³ - -
    Track Gauge - Standard 63 in - -
    BLADE: Digging Depth - Standard 23.8 in - -
    BLADE: Blade Lift Height - Standard 30.2 in - -
    Ground Clearance - Standard 13 in - -
    Overall Length - With Blade - Standard 170.7 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Blade Height - Standard 42.2 in - -
    BLADE: Maximum Tilt - Standard 15.8 in - -
    BLADE: Blade Width - Standard 109.5 in - -
    BLADE: Blade Width at Maximum Angle - Standard 103.8 in - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - -
    Dozer Height - Standard 109 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - -
    Dozer Height - LGP 109 in - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level II - -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - -
    Control Hydraulic - -
    Rope Diameter - Optional 0.75 in - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Winch Drive Hydraulic - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 20350 lb - -
    Rope Diameter - Recommended 0.63 in - -
    Maximum Line Speed - Bare Drum 50 ft/min - -
    Speed Variable - -
    Winch Length 35.63 in - -
    Drum Diameter 8 in - -
    Overall width 27.91 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -

    High Performance Winch
    Winch length 27.76 in - -
    Rope diameter – optional 0.75 in - -
    Maximum line speed – bare drum 131 ft/min - -
    Maximum line pull – bare drum 40000 lb - -
    Weight 1345 lb - -
    Drum capacity – optional 256 ft - -
    Maximum line speed – full drum 207 ft/min - -
    Rope diameter – recommended 0.63 in - -
    Winch drive Hydrostatic - -
    Throat clearance 6.75 in - -
    Drum diameter 10 in - -
    Overall width 29.2 in - -
    Drum width 10.8 in - -
    Maximum line pull – full drum 25000 lb - -
    Speed Variable - -
    Drum capacity – recommended cable 371 ft - -
    Control Hydraulic - -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 -
    Net Power (SAE J1349:2011) - 249 HP -
    Net Power (ISO 9249:2007) - 249 HP -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - 2200 r/min -
    Gross Power (SAE J1995:2014) - 284 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 902 lb/ft -
    Torque Rise - 52% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -
    Low Idle Speed - 800 r/min -
    Maximum Altitude without Derating - 9842.5 ft -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb -

    Scoops
    Chip Scoop Doze Capacity - 37.9 yd³ -
    Chip Scoop Carry Capacity - 19 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - 2200 r/min -
    Net Power (SAE J1349:2011) - 249 HP -
    Gross Power (SAE J1995:2014) - 286 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 749 lb/ft -
    Torque Rise - 26% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 23.5 gal/min -
    Relief Valve Setting - Lift/Tilt - 3190 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System - Open center, fixed displacement gear -
    Pilot Relief Valve Setting - 3046 psi -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 38.8 gal/min -
    Relief Valve Setting - Steering - 4003 psi -
    Total Steering Angle - 72° -
    Steering Cycle Times - High Idle - 3 s -
    Steering Cycle Times - Low Idle - 8.2 s -

    Axles
    Front - Planetary – Fixed -
    Rear - Planetary – Oscillating -
    Oscillation Angle - ±10° -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft -
    Height - Top of Cab - 12.1 ft -
    Height - Top of Exhaust Pipe - 11.3 ft -
    Height - Top of Hood - 8.7 ft -
    Height to Top of Radiator Guard - 8 ft -
    Ground Clearance to Hitch - 1.4 ft -
    Ground Clearance to Transmission Guard - 1.4 ft -
    Ground Clearance to Bottom of Bumper - 2.3 ft -
    Centerline of Rear Axle to Bumper - 6.5 ft -
    Centerline of Front Axle to Hitch - 5.5 ft -
    Wheel Base - 11 ft -
    Width over Platform - 10.3 ft -
    Overall Length to Front Tire - 21 ft -
    Overall Machine Length with Straight Blade - 23.6 ft -
    Overall Machine Length with Coal Blade - 25.5 ft -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 111 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C32
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 HP
    Displacement - - 1959 in³
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 955 HP
    Note (1) - - *Excludes all fan losses.
    Note (2) - - Engine ratings apply at 1,800 rpm.
    Note (3) - - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

    Blades
    Semi-Universal (SU)* Capacity - - 35.6 yd³
    Semi-Universal (SU)* Width Over Endbits - - 219.8 in
    U-Blade Capacity - - 45 yd³
    U-Blade Width - - 249.6 in
    Reclamation Universal - Blade capacity (SAE J1265) - - 55 yd³
    Reclamation Universal - Width with blade (over end bits) - - 251.8 in
    Carry Dozer - Blade capacity (SAE J1265) - - 57 yd³
    Carry Dozer - Width with blade (over end bits) - - 263.9 in

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - Cat® C32
    Displacement - - 1959 in³
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 HP
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 957 HP
    Note (1) - - *Excludes all fan losses.
    Note (2) - - Engine ratings apply at 1,800 rpm.
    Note (3) - - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

    Fuel Tank Capacities
    Fuel Tank - Total Volume - - 500 gal (US)
    Fuel Tank - Usable Volume - - 475 gal (US)

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 66000 lb
    Maximum penetration depth (standard tip) - - 63.5 in
    Pryout Force - - 148510 lb

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 66110 lb
    Maximum penetration depth (standard tip) - - 85.5 in
    Pryout Force - - 148510 lb

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - - 131.1 in
    Maximum Penetration Force - Shank Vertical - - 77350 lb
    Maximum Penetration - Standard Tip - - 43.3 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 145640 lb

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - - 149.8 in
    Length with SU-Blade** - No rear attachment - - 345.1 in
    Overall Length SU-Blade and SS Ripper** - - 421.7 in

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
    FOPS - - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
    Sound (1) - - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
    Sound (2) - - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).

    Dimensions - D11
    Ground Clearance* - - 31.4 in
    Track Gauge - - 114 in
    Width at Outside of Track (710 mm Track Shoe) - - 142 in
    Height (ROPS/canopy)* - - 185.9 in
    Length of Track on Ground - - 175 in
    Length with SU-Blade** - No rear attachment - - 337.8 in
    Overall Length SU-Blade and SS Ripper** - - 414.4 in
    Note - - *Includes grouser height for total dimensions on hard surfaces.
    Add a Similar Product: