CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D3 Track-Type Tractor
    View Product
    814 Wheel Dozer
    View Product Remove
    D7 Dozer
    View Product Remove
    D10 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C3.6 Cat® C7.1 Cat C9.3B -
    Power - Net 104 hp - 265 hp -
    Displacement 220 in³ 427.8 in³ - -
    Net Power - 2,200 rpm - SAE J1349 104 hp - - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 hp - - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module, and alternator. Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( -
    Net Power - SAE J1349:2011 - 249 hp - -
    Net Power - ISO 9249:2007 - 249 hp - -
    Gross Power - SAE J1995:2014 - 286 hp - -
    Engine Power - ISO 14396:2002 - 275 hp - -
    Rated Speed - 2200 r/min - -
    Emissions - Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV -
    Peak Torque (1400 rpm) - 902 lbf·ft - -
    Torque Rise - 26 % - -
    Engine Power - ISO 14396: 2002 - 275 hp - -
    Peak Torque ( 1,400 rpm ) - 749 lbf·ft - -
    Bore - 4.1 in - -
    Stroke - 5.3 in - -
    High Idle Speed - 2270 r/min - -
    Low Idle Speed - 800 r/min - -
    Maximum Altitude without Derating - 9842.5 ft - -
    Net Power - Rated - ISO 9249/SAE J1349 - - 265 hp -
    Net Power (Rated) - ISO 9249 (DIN) - - 268 mhp -
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. -
    Note (4) - - Machine Build Number 17A -

    Weights
    Operating Weight 20640 lb - 65644 lb 154888 lb
    Operating Weight - LGP 21369 lb - - -
    Operating Weight - LGP, 762 mm/30 in 21810 lb - - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - - D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
    Shipping Weight - - - 111739 lb

    Transmission
    Drive Pumps 1 - - -
    Maximum Travel Speed - Forward 5.6 mile/h - - -
    Maximum Travel Speed - Reverse 6.2 mile/h - - -
    Track Motors 2 - - -
    Relief Valve Settings 7033 psi - - -
    Transmission Type - Cat Planetary Power Shift - -
    Forward - 1 - 3.7 mile/h - -
    Forward - 2 - 6.5 mile/h - -
    Forward - 3 - 11.2 mile/h - -
    Forward - 4 - 19.4 mile/h - -
    Reverse - 1 - 4.2 mile/h - -
    Reverse - 2 - 7.3 mile/h - -
    Reverse - 3 - 12.8 mile/h - -
    Reverse - 4 - 22.1 mile/h - -
    Powertrain - - Fully Automatic 4-Speed -
    1.0 Forward - - - 2.5 mile/h
    1.5 Forward - - - 3.4 mile/h
    2.0 Forward - - - 4.5 mile/h
    2.5 Forward - - - 6 mile/h
    3.0 Forward - - - 7.8 mile/h
    1.0 Reverse - - - 3.2 mile/h
    1.5 Reverse - - - 4.2 mile/h
    2.0 Reverse - - - 5.6 mile/h
    2.5 Reverse - - - 7.5 mile/h
    3.0 Reverse - - - 9.8 mile/h
    Transmission Clutch Diameter - - - 17 in
    Type - - - Planetary powershift

    Hydraulic Controls
    Pump Output 17.2 gal/min - - -
    Relief Valve Settings 2988 psi - - -
    Pump Type - - - Variable displacement piston
    Pump Output - Implement - - - 112 gal/min
    Note (1) - - - Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).
    Fan Pump - - - 21.7 gal/min
    Note (2) - - - Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
    Tilt Cylinder Flow - Rod End Flow - - - 112 gal/min
    Tilt Cylinder Flow - Head End Flow - - - 63.4 gal/min
    Lift Cylinder Relief Valve Setting - - - 4061.1 psi
    Tilt Cylinder Relief Valve Setting - - - 3872.5 psi
    Ripper - Lift - Relief Valve Setting - - - 4061.1 psi
    Ripper - Pitch - Relief Valve Setting - - - 4061.1 psi
    Tank Capacity - - - 32.2 gal (US)
    Cylinder Sizing - Blade Lift - Bore - - - 5.5 in
    Cylinder Sizing - Blade Tilt - Bore - - - 8.3 in
    Cylinder Sizing - Ripper Shank Lift - Bore - - - 8.3 in
    Cylinder Sizing - Ripper Shank Angle - Bore - - - 7.1 in
    Cylinder Sizing - Blade Lift - Stroke - - - 65.1 in
    Cylinder Sizing - Blade Tilt - Stroke - - - 9.5 in
    Cylinder Sizing - Ripper Shank Lift - Stroke - - - 21.1 in
    Cylinder Sizing - Ripper Shank Angle - Stroke - - - 26 in
    Note (3) - - - Electro-hydraulic pilot valves assist operations of ripper and dozer controls.

    Ripper
    Type Parallelogram - - -
    Number of Shanks 3 - - -
    Height 6.5 in - - -
    Weight 1222 lb - - -
    Maximum Digging Depth 13.3 in - - -
    Maximum Reach - Ground Line 30.2 in - - -
    Overall Width 67.3 in - - -
    Maximum Ground Clearance Under Tip 17.6 in - - -

    Undercarriage
    Ground Pressure - LGP 4.5 psi - - -
    Track Gauge - LGP 69 in - - -
    Length - Track on Ground - LGP 91 in - - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40 - - -
    Ground Pressure - LGP, 762 mm (30 in) 3.9 psi - - -
    Length - Track on Ground - LGP, 762 mm (30 in) 91 in - - -
    Shoe Width - LGP 26 in - - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - - -
    Track Gauge 63 in - - 100.4 in
    Number of Rollers - Each Side 7 - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    Shoe Width - Standard 20 in - - -
    Shoe Type - - - Extreme Service (ES)
    Width - Shoe - - - 24 in
    Shoes/Side - - - 44
    Grouser Height - - - 3.7 in
    Pitch - - - 10.2 in
    Ground Clearance - - - 28.5 in
    Length - Track on Ground - - - 152.8 in
    Ground Contact Area - - - 7347 in²
    Track Rollers/Side - - - 8
    Number of Carrier Rollers - - - 1 per side (optional)

    Undercarriage 
    Ground Pressure  5.7 psi - - -
    Length of Track on Ground  91 in - - -
    Number of Shoes - Each Side - Abrasion Undercarriage  36 - - -

    Service Refill Capacities
    Cooling System 5 gal (US) - - -
    Final Drive - Each - LGP 2.6 gal (US) - - -
    Crankcase - With Filter 2.8 gal (US) - - -
    Transmission - Hydraulic Tank 23.8 gal (US) - - -
    Fuel Tank 51.5 gal (US) 132.1 gal (US) 123 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - - -
    Diesel Exhaust Fluid Tank - 4.2 gal (US) - -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) - -
    Cooling Systems - Tier 3/Stage IIIA equivalent - 19.3 gal (US) - -
    Engine Crankcase - 5.3 gal (US) - -
    Transmission - 13.2 gal (US) - -
    Differential - Final Drives - Front - 17.2 gal (US) - -
    Differential - Final Drives - Rear - 17.2 gal (US) - -
    Hydraulic System - Implement/Steering - 34.1 gal (US) - -
    Hydraulic Tank Only - 19.8 gal (US) - -
    Note (1) - All nonroad Tier 4 Final and EU Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that - -
    DEF Tank - - 12 gal (US) -

    Service Refill Capacities 
    Final Drives - Each Side  2.6 gal (US) - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.

    Dimensions
    BLADE: Blade Width - LGP 126.7 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    BLADE: Digging Depth - LGP 23.2 in - - -
    Track Gauge - LGP 67.9 in - - -
    BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ - - -
    BLADE: Blade Width at Maximum Angle - LGP 115.8 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - - -
    BLADE: Blade Height - LGP 39.8 in - - -
    BLADE: Blade Lift Height - LGP 30.2 in - - -
    Ground Clearance - LGP 13 in - - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 169.6 in - - -
    Overall Length - With Blade - LGP 169.6 in - - -
    Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) - - -
    BLADE: Maximum Tilt - LGP 17.7 in - - -
    BLADE: Maximum Angle (either side) - LGP 25° - - -
    Length of Basic Dozer (without blade) - Standard 128.7 in - - -
    Dozer Height - Standard 109 in - - -
    Width of Dozer (standard shoes, no blade) - LGP 94.9 in - - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 103.5 in - - -
    Length of Basic Dozer (without blade) - LGP 128.7 in - - -
    Dozer Height - LGP, 762 mm (30 in) 109 in - - -
    Width of Dozer (standard shoes, no blade) - Standard 83 in - - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 128.7 in - - -
    Dozer Height - LGP 109 in - - -

    Dimensions 
    BLADE: Blade Capacity (SAE) - Standard  2.86 yd³ - - -
    Track Gauge - Standard  63 in - - -
    BLADE: Digging Depth - Standard  23.8 in - - -
    BLADE: Blade Lift Height - Standard  30.2 in - - -
    Ground Clearance - Standard  13 in - - -
    Overall Length - With Blade - Standard  170.7 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58° - - -
    BLADE: Blade Height - Standard  42.2 in - - -
    BLADE: Maximum Tilt - Standard  15.8 in - - -
    Note  Abrasion Undercarriage - - -
    BLADE: Blade Width - Standard  109.5 in - - -
    BLADE: Blade Width at Maximum Angle - Standard  103.8 in - - -
    BLADE: Maximum Angle (either side) - Standard  25° - - -

    Engine 
    Power Train  Hydrostatic - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 Level II - - -

    Retrieval Winch
    Maximum Line Pull - Bare Drum 32150 lb - - -
    Control Hydraulic - - -
    Rope Diameter - Optional 0.75 in - - -
    Drum Capacity - Optional Cable 195 ft - - -
    Maximum Line Speed - Full Drum 79 ft/min - - -
    Drum Capacity - Recommended Cable 277 ft - - -
    Winch Drive Hydraulic - - -
    Weight 1747 lb - - -
    Maximum Line Pull - Full Drum 20350 lb - - -
    Rope Diameter - Recommended 0.63 in - - -
    Maximum Line Speed - Bare Drum 50 ft/min - - -
    Speed Variable - - -
    Winch Length 35.63 in - - -
    Drum Diameter 8 in - - -
    Overall width 27.91 in - - -
    Drum Width 9.65 in - - -
    Throat Clearance 5.6 in - - -

    High Performance Winch
    Winch length 27.76 in - - -
    Rope diameter – optional 0.75 in - - -
    Maximum line speed – bare drum 131 ft/min - - -
    Maximum line pull – bare drum 40000 lb - - -
    Weight 1345 lb - - -
    Drum capacity – optional 256 ft - - -
    Maximum line speed – full drum 207 ft/min - - -
    Rope diameter – recommended 0.63 in - - -
    Winch drive Hydrostatic - - -
    Throat clearance 6.75 in - - -
    Drum diameter 10 in - - -
    Overall width 29.2 in - - -
    Drum width 10.8 in - - -
    Maximum line pull – full drum 25000 lb - - -
    Speed Variable - - -
    Drum capacity – recommended cable 371 ft - - -
    Control Hydraulic - - -

    Operating Specifications
    Operating Weight (Tier 4 Final/Stage V) - 48526 lb - -
    Operating Weight (Tier 3/Stage IIIA equivalent) - 47887 lb - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated load sensing valve with EH - -
    Lift/Tilt System - Variable displacement piston - -
    Maximum Flow at 2,200 rpm - 23.5 gal/min - -
    Relief Valve Setting - Lift/Tilt - 3190 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) - -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) - -
    Pilot System - Open center, fixed displacement gear - -
    Pilot Relief Valve Setting - 3046 psi - -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing - -
    Steering System - Pump - Variable displacement piston - -
    Maximum Flow at 2,200 rpm - 38.8 gal/min - -
    Relief Valve Setting - Steering - 4003 psi - -
    Total Steering Angle - 72° - -
    Steering Cycle Times - High Idle - 3 s - -
    Steering Cycle Times - Low Idle - 8.2 s - -

    Axles
    Front - Planetary – Fixed - -
    Rear - Planetary – Oscillating - -
    Oscillation Angle - ±10° - -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL - -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) - 111 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* - 70 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)* - 109 dB(A) - -
    Note (1) - * Sound suppression equipped - -
    Note (2) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed. - -
    Note (3) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed. - -
    Note (4) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) - 112 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* - 70 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)* - 110 dB(A) - -
    Note (1) - * Sound suppression equipped - -
    Note (2) - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed. - -
    Note (3) - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed. - -
    Note (4) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft - -
    Height - Top of Cab - 12.1 ft - -
    Height - Top of Exhaust Pipe - 11.3 ft - -
    Height - Top of Hood - 8.7 ft - -
    Height to Top of Radiator Guard - 8 ft - -
    Ground Clearance to Hitch - 1.4 ft - -
    Ground Clearance to Transmission Guard - 1.4 ft - -
    Ground Clearance to Bottom of Bumper - 2.3 ft - -
    Centerline of Rear Axle to Bumper - 6.5 ft - -
    Centerline of Front Axle to Hitch - 5.5 ft - -
    Wheel Base - 11 ft - -
    Width over Platform - 10.3 ft - -
    Overall Length to Front Tire - 21 ft - -
    Overall Machine Length with Straight Blade - 23.6 ft - -
    Overall Machine Length with Coal Blade - 25.5 ft - -
    Ground Clearance* - - - 28.5 in
    Track Gauge - - - 100.4 in
    Width - Without Trunnions - 610 mm/24 in ES - - - 130.4 in
    Width - Over Trunnions - - - 148 in
    Height - FOPS Cab* - - - 162.8 in
    Height - Top of Stack* - - - 171.5 in
    Height - ROPS/Canopy* - - - 173.5 in
    Note (1) - - - *Includes grouser height for total dimensions on hard surfaces.
    Length - Track on Ground - - - 152.8 in
    Overall Length - Basic Tractor - - - 209.6 in
    Length - With SU-Blade - - - 292 in
    Length - With U-Blade - - - 305.1 in
    Length - With Single-Shank Ripper - - - 278.8 in
    Length - With Multi-Shank Ripper - - - 285.1 in
    Overall Length - SU-Blade/SS Ripper - - - 360.6 in

    Straight Blade
    Capacity - 3.72 yd³ - -
    Overall Width - 12 ft - -
    Height - 3.3 ft - -
    Dig Depth - 1.6 ft - -
    Ground Clearance - 3 ft - -
    Maximum Tilt - 2.6 ft - -
    Turning Radius – Outside Corner of Blade - 23.5 ft - -
    Turning Radius – Inside Corner of Blade - 11.6 ft - -
    Weight - 3000 lb - -
    Total Operating Weight - 48526 lb - -

    Coal Blade
    Capacity - 13.8 yd³ - -
    Overall Width - 14.2 ft - -
    Height - 4.8 ft - -
    Dig Depth - 1.6 ft - -
    Ground Clearance - 3.1 ft - -
    Maximum Tilt - 3.1 ft - -
    Turning Radius – Outside Corner of Blade - 25.1 ft - -
    Turning Radius – Inside Corner of Blade - 11.2 ft - -
    Weight - 4429 lb - -
    Total Operating Weight - 49996 lb - -

    Standard SU
    Operating Weight - - 65644 lb -
    Ground Pressure - - 10 psi -
    Width of Standard Shoe - - 24 in -
    Blade - - Semi-Universal (SU) -
    Blade Capacity - - 10 yd³ -

    LGP S
    Operating Weight - - 63220 lb -
    Ground Pressure - - 6 psi -
    Width of Standard Shoe - - 36 in -
    Blade - - Straight (S) -
    Blade Capacity - - 8 yd³ -

    Waste Handler
    Operating Weight - - 62035 lb -
    Ground Pressure - - 10 psi -
    Width of Standard Shoe - - 24 in -
    Blade - - Universal Landfill (U) -
    Blade Capacity - - 22 yd³ -

    Sustainability
    Recyclability - - 98% -

    Note (2) - - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - - Cat® C27
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - - 602 hp
    Engine Power - Gross SAE J1995* - Forward - - - 631 hp
    Engine Power - Gross SAE J1995* - Reverse - - - 801 hp
    Engine Power - ISO 14396* - Forward - - - 620 hp
    Engine Power - ISO 14396* - Reverse - - - 789 hp
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - - 756 hp
    Displacement - - - 1648 in³
    Stroke - - - 6 in
    Bore - - - 5.4 in
    Emissions - - - U.S. EPA Tier 4 Final/EU Stage V
    Note (1) - - - *Excludes all fan losses.
    Note (2) - - - All Engine ratings apply at 1,800 rpm.
    Note (3) - - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
    Note (4) - - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
    Note (5) - - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

    Standards
    ROPS - - - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
    FOPS - - - Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
    Sound - - - Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
    Note - - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
    Sound (1) - - - Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
    Note (1) - - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
    Note (2) - - - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
    Note (3) - - - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).

    Steering and Brakes
    Steering Type - - - Hydraulically Applied Multiple-Disc Steering Clutch
    Brake Type - - - Spring Applied Multiple- Disc Brake
    Brake Diameter - - - 15.4 in
    Brake Count - - - 10

    Blades
    10SU ABR - Capacity (SAE J1265) - - - 24.2 yd³
    10SU ABR - Width (over end bits) - - - 194.5 in
    10SU ABR - Height - - - 83.5 in
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - - 19.98 in
    10SU ABR - Digging Depth - Blade Pitch: Nominal - - - 25.23 in
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - - 30.08 in³
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - - 66.14 in
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - - 53.86 in
    10SU ABR - Ground Clearance - Maximum Tilt LH - - - 56.3 in
    10SU ABR - Ground Clearance - Maximum Tilt RH - - - 56.3 in
    10U ABR - Capacity (SAE J1265) - - - 28.7 yd³
    10U ABR - Width (over end bits) - - - 207.1 in
    10U ABR - Height - - - 83.5 in
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - - 19.98 in
    10U ABR - Digging Depth - Blade Pitch: Nominal - - - 60 in
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - - 30.1 in
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - - 66.1 in
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - - 53.9 in
    10U ABR - Ground Clearance - Maximum Tilt LH - - - 60.8 in
    10U ABR - Ground Clearance - Maximum Tilt RH - - - 60.8 in
    10U ABR - Weights - Blade Weight* - - - 23585 lb
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - - - 154888 lb
    Note (1) - - - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
    Note (2) - - - *Does not include hydraulic controls but includes blade cylinders, pusharms.
    Note (3) - - - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - - 49233 lbf
    Maximum penetration depth (standard tip) - - - 59.2 in
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - - 36 in
    Weight - - - 14209 lb
    Note - - - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - - 53055 lbf
    Maximum penetration depth (standard tip) - - - 78.3 in
    Weight - - - 14548 lb
    Note - - - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - - Cat® C27
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - - 603 hp
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - - 722 hp
    Engine Power - Gross SAE J1995* - Forward - - - 631 hp
    Engine Power - Gross SAE J1995* - Reverse - - - 766 hp
    Engine Power - ISO 14396* - Forward - - - 622 hp
    Engine Power - ISO 14396* - Reverse - - - 756 hp
    Displacement - - - 1648 in³
    Bore - - - 5.4 in
    Stroke - - - 6 in
    Emissions - - - U.S. EPA Tier 2 Equivalent
    Note (1) - - - *Excludes all fan losses.
    Note (2) - - - All Engine ratings apply at 1,800 rpm.
    Note (3) - - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
    Note (4) - - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
    Note (5) - - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - - - 323.3 gal (US)
    Fuel Tank - Total Volume - - - 335.2 gal (US)

    FLUID CAPACITIES
    Cooling System Refill – Tier 4 Final Engine - - - 46.2 gal (US)
    Engine Crankcase Sump - - - 27.2 gal (US)
    Power Train - Total Volume - - - 81.4 gal (US)
    Power Train - Refill Volume - - - 74.8 gal (US)
    Final Drives (each) - - - 12.2 gal (US)
    Track Roller Frames (each) - - - 16.9 gal (US)
    Pivot Shaft Oil - - - 9.5 gal (US)
    Hydraulic System Tank - - - 32.2 gal (US)
    Add a Similar Product: