|
|
|
|
Engine |
Engine Model |
Cat® C3.6 |
- |
- |
Power - Net |
104 HP |
- |
- |
Displacement |
220 in³ |
- |
- |
Net Power - 2,200 rpm - SAE J1349 |
104 HP |
- |
- |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
104 HP |
- |
- |
Note (1) |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
- |
- |
Power Train |
Hydrostatic |
- |
- |
Note (2) |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
- |
- |
Weights |
Operating Weight |
20640 lb |
110225 lb |
229800 lb |
Operating Weight - LGP |
21369 lb |
- |
- |
Operating Weight - LGP, 762 mm/30 in |
21810 lb |
- |
- |
Note (2) |
For machine with ripper, add 554 kg (1,222 lb). |
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. |
Note (1) |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. |
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. |
Shipping Weight |
- |
84373 lb |
- |
Operating Weight - Carrydozer |
- |
- |
250665 lb |
Transmission |
Drive Pumps |
1 |
- |
- |
Maximum Travel Speed - Forward |
5.6 mile/h |
- |
- |
Maximum Travel Speed - Reverse |
6.2 mile/h |
- |
- |
Track Motors |
2 |
- |
- |
Relief Valve Settings |
7033 psi |
- |
- |
1.0 Forward |
- |
2.2 mile/h |
2.5 mile/h |
2.0 Forward |
- |
3.9 mile/h |
4.4 mile/h |
3.0 Forward |
- |
6.8 mile/h |
7.6 mile/h |
1.0 Reverse |
- |
2.7 mile/h |
3 mile/h |
2.0 Reverse |
- |
4.8 mile/h |
5.3 mile/h |
3.0 Reverse |
- |
8.4 mile/h |
9.1 mile/h |
Type |
- |
Planetary powershift |
- |
Drawbar Pull - 3 Forward |
- |
- |
46250 ft·lbf |
Drawbar Pull - 1 Forward |
- |
- |
148200 ft·lbf |
Drawbar Pull - 2 Forward |
- |
- |
82300 ft·lbf |
Hydraulic Controls |
Pump Output |
17.2 gal/min |
- |
- |
Relief Valve Settings |
2988 psi |
- |
- |
Pump Type |
- |
Piston-type geared to flywheel |
Variable displacement piston pump |
Pump Output - Steering |
- |
96 gal/min |
- |
Fan Pump |
- |
21 gal/min |
- |
Tilt Cylinder Flow - Rod End Flow |
- |
53 gal/min |
- |
Tilt Cylinder Flow - Head End Flow |
- |
53 gal/min |
- |
Lift Cylinder Relief Valve Setting |
- |
3800 lbf/in |
- |
Tilt Cylinder Relief Valve Setting |
- |
2799 psi |
- |
Ripper - Lift - Relief Valve Setting |
- |
3800 psi |
- |
Ripper - Pitch - Relief Valve Setting |
- |
3800 psi |
- |
Steering System - Pressure |
- |
5874 psi |
- |
Tank Capacity |
- |
24 gal/min |
- |
Note (1) |
- |
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). |
- |
Note (2) |
- |
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). |
- |
Note (3) |
- |
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) |
- |
Combined Pump Output - Implement |
- |
- |
177 gal/min |
Ripper |
Type |
Parallelogram |
- |
- |
Number of Shanks |
3 |
- |
- |
Height |
6.5 in |
- |
- |
Weight |
1222 lb |
- |
- |
Maximum Digging Depth |
13.3 in |
- |
- |
Maximum Reach - Ground Line |
30.2 in |
- |
- |
Overall Width |
67.3 in |
- |
- |
Maximum Ground Clearance Under Tip |
17.6 in |
- |
- |
Undercarriage |
Ground Pressure - LGP |
4.5 psi |
- |
- |
Track Gauge - LGP |
69 in |
- |
- |
Length - Track on Ground - LGP |
91 in |
- |
- |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
40 |
- |
- |
Ground Pressure - LGP, 762 mm (30 in) |
3.9 psi |
- |
- |
Length - Track on Ground - LGP, 762 mm (30 in) |
91 in |
- |
- |
Shoe Width - LGP |
26 in |
- |
- |
Shoe Width - LGP, 762 mm (30 in) |
30 in |
- |
- |
Track Gauge |
63 in |
88.6 in |
114 in |
Number of Rollers - Each Side |
7 |
- |
- |
Track Gauge - LGP, 762 mm (30 in) |
73 in |
- |
- |
Ground Pressure |
5.7 psi |
- |
- |
Length of Track on Ground |
91 in |
- |
- |
Number of Shoes - Each Side - Abrasion Undercarriage |
36 |
- |
- |
Shoe Width - Standard |
20 in |
- |
- |
Shoe Type |
- |
Extreme Service |
Extreme Service |
Width - Shoe |
- |
24 in |
28 in |
Shoes/Side |
- |
43 |
41 |
Grouser Height |
- |
3.3 in |
4 in |
Pitch |
- |
9.4 in |
12.5 in |
Ground Clearance |
- |
18.1 in |
- |
Length - Track on Ground |
- |
136.6 in |
175 in |
Ground Contact Area |
- |
45.6 ft² |
9781 in² |
Track Rollers/Side |
- |
8 |
8 |
Number of Carrier Rollers |
- |
1 per side (optional) |
1 per side (optional) |
Width - Shoe - CD |
- |
- |
36 in |
Ground Clearance* |
- |
- |
30.6 in |
Ground Contact Area - CD |
- |
- |
12605 in² |
Service Refill Capacities |
Cooling System |
5 gal (US) |
- |
46.8 gal (US) |
Final Drive - Each - LGP |
2.6 gal (US) |
- |
- |
Crankcase - With Filter |
2.8 gal (US) |
- |
- |
Transmission - Hydraulic Tank |
23.8 gal (US) |
- |
- |
Fuel Tank |
51.5 gal (US) |
- |
- |
Final Drives - Each Side |
2.6 gal (US) |
- |
- |
Diesel Exhaust Fluid (DEF) Tank |
4.9 gal (US) |
- |
- |
Cooling System Refill - Tier 2 Equivalent Engine |
- |
- |
41.7 gal (US) |
Engine Crankcase |
- |
- |
35.1 gal (US) |
Power Train |
- |
- |
120 gal (US) |
Power Train - Refill Volume |
- |
- |
103.3 gal (US) |
Final Drive - Each |
- |
- |
12.4 gal (US) |
Roller Frames - Each |
- |
- |
24.8 gal (US) |
Hydraulic Tank |
- |
- |
42.2 gal (US) |
Hydraulic System Tank and Chassis |
- |
- |
64.7 gal (US) |
Hydraulic System Chassis + Blade and Ripper (Standard) |
- |
- |
117.6 gal (US) |
Hydraulic System Chassis + Blade and Ripper (Carrydozer) |
- |
- |
143.4 gal (US) |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. |
- |
Note (1) |
- |
- |
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) |
Dimensions |
BLADE: Blade Width - LGP |
126.7 in |
- |
- |
Track Gauge - LGP, 762 mm (30 in) |
73 in |
- |
- |
BLADE: Digging Depth - LGP |
23.2 in |
- |
- |
Track Gauge - LGP |
67.9 in |
- |
- |
BLADE: Blade Capacity (SAE) - LGP |
3.06 yd³ |
- |
- |
BLADE: Blade Width at Maximum Angle - LGP |
115.8 in |
- |
- |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
52° to 58° |
- |
- |
Ground Clearance - LGP, 762 mm (30 in) |
13 in |
- |
- |
BLADE: Blade Height - LGP |
39.8 in |
- |
- |
BLADE: Blade Lift Height - LGP |
30.2 in |
- |
- |
Ground Clearance - LGP |
13 in |
- |
- |
Overall Length - With Blade - LGP, 762 mm (30 in) |
169.6 in |
- |
- |
Overall Length - With Blade - LGP |
169.6 in |
- |
- |
Note |
Abrasion Undercarriage |
- |
- |
BLADE: Maximum Tilt - LGP |
17.7 in |
- |
- |
BLADE: Maximum Angle (either side) - LGP |
25° |
- |
- |
BLADE: Blade Capacity (SAE) - Standard |
2.86 yd³ |
- |
- |
Track Gauge - Standard |
63 in |
- |
- |
BLADE: Digging Depth - Standard |
23.8 in |
- |
- |
BLADE: Blade Lift Height - Standard |
30.2 in |
- |
- |
Ground Clearance - Standard |
13 in |
- |
- |
Overall Length - With Blade - Standard |
170.7 in |
- |
- |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
52° to 58° |
- |
- |
BLADE: Blade Height - Standard |
42.2 in |
- |
- |
BLADE: Maximum Tilt - Standard |
15.8 in |
- |
- |
BLADE: Blade Width - Standard |
109.5 in |
- |
- |
BLADE: Blade Width at Maximum Angle - Standard |
103.8 in |
- |
- |
BLADE: Maximum Angle (either side) - Standard |
25° |
- |
- |
Length of Basic Dozer (without blade) - Standard |
128.7 in |
- |
- |
Dozer Height - Standard |
109 in |
- |
- |
Width of Dozer (standard shoes, no blade) - LGP |
92.9 in |
- |
- |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) |
103.5 in |
- |
- |
Length of Basic Dozer (without blade) - LGP |
128.7 in |
- |
- |
Dozer Height - LGP, 762 mm (30 in) |
109 in |
- |
- |
Width of Dozer (standard shoes, no blade) - Standard |
83 in |
- |
- |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) |
128.7 in |
- |
- |
Dozer Height - LGP |
109 in |
- |
- |
Cab |
ROPS |
ISO 3471:2008 |
- |
- |
FOPS |
ISO 3449:2005 Level II |
- |
- |
Retrieval Winch |
Maximum Line Pull - Bare Drum |
32150 lb |
- |
- |
Control |
Hydraulic |
- |
- |
Rope Diameter - Optional |
0.75 in |
- |
- |
Drum Capacity - Optional Cable |
195 ft |
- |
- |
Maximum Line Speed - Full Drum |
79 ft/min |
- |
- |
Drum Capacity - Recommended Cable |
277 ft |
- |
- |
Winch Drive |
Hydraulic |
- |
- |
Weight |
1747 lb |
- |
- |
Maximum Line Pull - Full Drum |
20350 lb |
- |
- |
Rope Diameter - Recommended |
0.63 in |
- |
- |
Maximum Line Speed - Bare Drum |
50 ft/min |
- |
- |
Speed |
Variable |
- |
- |
Winch Length |
35.63 in |
- |
- |
Drum Diameter |
8 in |
- |
- |
Overall width |
27.91 in |
- |
- |
Drum Width |
9.65 in |
- |
- |
Throat Clearance |
5.6 in |
- |
- |
High Performance Winch |
Winch length |
27.76 in |
- |
- |
Rope diameter – optional |
0.75 in |
- |
- |
Maximum line speed – bare drum |
131 ft/min |
- |
- |
Maximum line pull – bare drum |
40000 lb |
- |
- |
Weight |
1345 lb |
- |
- |
Drum capacity – optional |
256 ft |
- |
- |
Maximum line speed – full drum |
207 ft/min |
- |
- |
Rope diameter – recommended |
0.63 in |
- |
- |
Winch drive |
Hydrostatic |
- |
- |
Throat clearance |
6.75 in |
- |
- |
Drum diameter |
10 in |
- |
- |
Overall width |
29.2 in |
- |
- |
Drum width |
10.8 in |
- |
- |
Maximum line pull – full drum |
25000 lb |
- |
- |
Speed |
Variable |
- |
- |
Drum capacity – recommended cable |
371 ft |
- |
- |
Control |
Hydraulic |
- |
- |
Engine - U.S. EPA Tier 2/3 Equivalent |
Engine Model |
- |
Cat® C18 |
- |
Engine Power - Net SAE J1349/ISO 9249 |
- |
452 HP |
- |
Bore |
- |
5.7 in³ |
- |
Stroke |
- |
7.2 in |
- |
Displacement |
- |
1106 in³ |
- |
Engine Power - Gross SAE J1995 |
- |
487 HP |
- |
Engine Power - ISO 14396 |
- |
479 HP |
- |
Emissions |
- |
U.S. EPA Tier 2 or Tier 3 equivalent |
- |
Note (1) |
- |
All engine ratings apply at 1,750 rpm. |
- |
Note (2) |
- |
No derating required up to 4267 m (14,000 ft) altitude. |
- |
Standards |
ROPS |
- |
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. |
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 |
FOPS |
- |
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. |
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II |
Sound |
- |
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling |
- |
Sound (1) |
- |
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c |
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). |
Sound (2) |
- |
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. |
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). |
Steering and Brakes |
Steering Type |
- |
Differential |
- |
Brake Type |
- |
Spring Applied Wet Disc |
- |
Brake Diameter |
- |
15.5 in |
- |
Brake Count |
- |
8 |
- |
Engine - U.S. EPA Tier 4 Final/EU Stage V |
Engine Model |
- |
Cat® C18 |
Cat® C32 |
Bore |
- |
5.7 in³ |
- |
Stroke |
- |
7.2 in³ |
- |
Displacement |
- |
1106 in³ |
1959 in³ |
Engine Power - Gross SAE J1995 |
- |
477 HP |
- |
Engine Power - ISO 14396 |
- |
468 HP |
- |
Engine Power - Net SAE J1349/ISO 9249 |
- |
440 HP |
- |
Emissions |
- |
U.S. EPA Tier 4 / EU Stage V |
- |
Note (1) |
- |
All Engine ratings apply at 1,750 rpm. |
*Excludes all fan losses. |
Note (2) |
- |
No derating required up to 2499 m (8,200 ft). |
Engine ratings apply at 1,800 rpm. |
Engine Power - Net SAE J1349/ISO 9249 - Forward |
- |
- |
850 HP |
Engine Power - Net SAE J1349/ISO 9249 - Reverse |
- |
- |
955 HP |
Note (3) |
- |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
FLUID CAPACITIES |
Fuel Tank (Splash Fill) |
- |
254 gal (US) |
- |
DEF Tank (Tier 4 only) |
- |
9.5 gal (US) |
- |
Fuel Tank (Fast Fill) |
- |
248 gal (US) |
- |
Cooling System |
- |
21 gal (US) |
- |
Engine Crankcase* |
- |
10 gal (US) |
- |
Powertrain |
- |
40 gal (US) |
- |
Final Drives (each) |
- |
4 gal (US) |
- |
Roller Frames (each) |
- |
12 gal (US) |
- |
Pivot Shaft Oil |
- |
8 gal (US) |
- |
Hydraulic System Tank |
- |
24 gal (US) |
- |
Note |
- |
*With oil filters. |
- |
Note 2 |
- |
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or |
- |
Note 3 |
- |
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. |
- |
Note 4 |
- |
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
- |
Blade - Semi-Universal |
Blade Capacity (SAE J1265) |
- |
17.8 yd³ |
- |
Blade Width (over end bits) |
- |
171.3 in |
- |
Blade Height |
- |
76.1 in |
- |
Maximum Digging Depth |
- |
23.9 in |
- |
Ground Clearance at Full Lift |
- |
56 in |
- |
Maximum Tilt |
- |
37 in |
- |
Blade Weight |
- |
10587 lb |
- |
Total Operating Weight* (with blade and single-shank ripper) |
- |
110205 lb |
- |
Note |
- |
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
Blade - Universal |
Blade Capacity (SAE J1265) |
- |
21.7 yd³ |
- |
Blade Width (over end bits) |
- |
184.3 in |
- |
Blade Height |
- |
76.1 in |
- |
Maximum Digging Depth |
- |
23.9 in |
- |
Ground Clearance at Full Lift |
- |
56 in |
- |
Maximum Tilt |
- |
39.9 in |
- |
Blade Weight |
- |
12016 lb |
- |
Total Operating Weight* (with blade and single-shank ripper) |
- |
111362 lb |
- |
Note |
- |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
Ripper - Single Shank |
Maximum penetration force * (shank vertical) |
- |
35520 lbf |
66000 lb |
Maximum penetration depth (standard tip) |
- |
48.5 in |
63.5 in |
Pryout Force |
- |
74637 lbf |
148510 lb |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
- |
34.7 in |
- |
Number of Pockets |
- |
1 |
- |
Weight |
- |
10701 lb |
- |
Total Operating Weight* (with SU Blade and noted ripper) |
- |
110205 lb |
- |
Note |
- |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type. |
- |
Ripper - Single Shank, Deep Ripping |
Maximum penetration force * (shank vertical) |
- |
38667 lbf |
66110 lb |
Maximum penetration depth (standard tip) |
- |
68 in |
85.5 in |
Pryout Force |
- |
74412 lbf |
148510 lb |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
- |
32.2 in |
- |
Number of Pockets |
- |
1 |
- |
Weight |
- |
10981 lb |
- |
Total Operating Weight* (with SU Blade and noted ripper) |
- |
110485 lb |
- |
Note |
- |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
Ripper - Multi-Shank, Adjustable Parallelogram |
Maximum Penetration Force - Shank Vertical |
- |
34621 lbf |
77350 lb |
Maximum Penetration - Standard Tip |
- |
31.4 in |
43.3 in |
Pry-Out Force - Multi-Shank Ripper with One Tooth |
- |
81156 lbf |
145640 lb |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
- |
34.6 in |
- |
Number of Pockets |
- |
3 |
- |
Weight |
- |
12136 lb |
- |
Total Operating Weight* - With SU-Blade and Ripper |
- |
111739 lb |
- |
Note |
- |
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
Overall Beam Width |
- |
- |
131.1 in |
Dimensions (Approximate) |
Ground Clearance* |
- |
18.1 in |
- |
Track Gauge |
- |
88.6 in |
- |
Width - Without Trunnions - Standard Shoe |
- |
113 in |
- |
Width - Over Trunnions |
- |
130.3 in |
- |
Height - FOPS Cab* |
- |
150.4 in |
- |
Height - Top of Stack* |
- |
152.6 in |
- |
Height - ROPS/Canopy* |
- |
157.5 in |
- |
Drawbar Height (Center of Clevis)* |
- |
30 in |
- |
Length - Track on Ground |
- |
136.6 in |
- |
Overall Length - Basic Tractor |
- |
193.3 in |
- |
Length - Basic Tractor - With Drawbar |
- |
206.4 in |
- |
Length - Basic Tractor - With Winch |
- |
218.3 in |
- |
Length - With SU-Blade** |
- |
259.9 in |
- |
Length - With U-Blade |
- |
274.3 in |
- |
Length - With Single-Shank Ripper |
- |
257 in |
- |
Length - With Multi-Shank Ripper |
- |
257.4 in |
- |
Overall Length - SU-Blade/SS Ripper |
- |
323.6 in |
- |
Note (1) |
- |
*Includes grouser height for total dimensions on hard surfaces. |
- |
Winches |
Winch Model |
- |
PA 140VS |
- |
Weight* |
- |
3950 lb |
- |
Oil Capacity |
- |
4 gal (US) |
- |
Drum Width |
- |
12.6 in |
- |
Wire Cable Diameter - Recommended |
- |
1.13 in |
- |
Wire Cable Diameter - Optional |
- |
1.25 ft |
- |
Maximum Drum Capacity - Recommended Cable Length |
- |
257 in |
- |
Maximum Drum Capacity - Optional Cable Length |
- |
204 ft |
- |
Wire Cable Ferrule Size - Outside Diameter |
- |
2.4 in |
- |
Wire Cable Ferrule Size - Length |
- |
2.8 in |
- |
Note |
- |
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
- |
Note (2) |
- |
Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
- |
Blades |
Semi-Universal (SU)* Capacity |
- |
- |
35.6 yd³ |
Semi-Universal (SU)* Width Over Endbits |
- |
- |
219.8 in |
U-Blade Capacity |
- |
- |
45 yd³ |
U-Blade Width |
- |
- |
249.6 in |
Reclamation Universal - Blade capacity (SAE J1265) |
- |
- |
55 yd³ |
Reclamation Universal - Width with blade (over end bits) |
- |
- |
251.8 in |
Carry Dozer - Blade capacity (SAE J1265) |
- |
- |
57 yd³ |
Carry Dozer - Width with blade (over end bits) |
- |
- |
263.9 in |
Engine - U.S. EPA Tier 2 Equivalent |
Engine Model |
- |
- |
Cat® C32 |
Displacement |
- |
- |
1959 in³ |
Engine Power - Net SAE J1349/ISO 9249 - Forward |
- |
- |
850 HP |
Engine Power - Net SAE J1349/ISO 9249 - Reverse |
- |
- |
957 HP |
Note (1) |
- |
- |
*Excludes all fan losses. |
Note (2) |
- |
- |
Engine ratings apply at 1,800 rpm. |
Note (3) |
- |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
Fuel Tank Capacities |
Fuel Tank - Total Volume |
- |
- |
500 gal (US) |
Fuel Tank - Usable Volume |
- |
- |
475 gal (US) |
Dimensions - D11 Carrydozer |
Width at Outside of Track (710 mm Track Shoe) |
- |
- |
149.8 in |
Length with SU-Blade** - No rear attachment |
- |
- |
345.1 in |
Overall Length SU-Blade and SS Ripper** |
- |
- |
421.7 in |
Dimensions - D11 |
Ground Clearance* |
- |
- |
31.4 in |
Track Gauge |
- |
- |
114 in |
Width at Outside of Track (710 mm Track Shoe) |
- |
- |
142 in |
Height (ROPS/canopy)* |
- |
- |
185.9 in |
Length of Track on Ground |
- |
- |
175 in |
Length with SU-Blade** - No rear attachment |
- |
- |
337.8 in |
Overall Length SU-Blade and SS Ripper** |
- |
- |
414.4 in |
Note |
- |
- |
*Includes grouser height for total dimensions on hard surfaces. |