Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
814 HP
-
-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
907 HP
-
-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
823 HP
-
-
Rated Speed
1750 r/min
-
-
Bore
5.7 in
-
-
Stroke
6.4 in
-
-
Displacement
1958 in²
-
-
Peak Torque - 1,200 rpm
3139 lb/ft
-
-
Torque Rise
30 %
-
-
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
-
Note (2)
Net torque rise meets SAE J139.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
-
Note (3)
No engine derating required up to 3050 m (10,000 ft) altitude.
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
-
Power - Net
-
215 HP
-
Net Power - Rated - ISO 9249/SAE J1349
-
215 HP
-
Net Power (Rated) - ISO 9249 (DIN)
-
219 mhp
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
-
Note (4)
-
Machine Build Number 20B
-
Weights
Operating Weight
224647 lb
51333 lb
-
Transmission
Transmission Type
Cat Planetary Power Shift
-
-
Converter Drive - Forward 1
4.4 mile/h
-
-
Converter Drive - Forward 2
7.7 mile/h
-
-
Converter Drive - Forward 3
13.2 mile/h
-
-
Converter Drive - Reverse 1
4.8 mile/h
-
-
Converter Drive - Reverse 2
8.4 mile/h
-
-
Converter Drive - Reverse 3
14.6 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8.1 mile/h
-
-
Direct Drive - Forward 3
14.2 mile/h
-
-
Direct Drive - Reverse 1
5 mile/h
-
-
Direct Drive - Reverse 2
8.9 mile/h
-
-
Direct Drive - Reverse 3
15.6 mile/h
-
-
Note
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
-
Power Train
-
Electric Drive
-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
161 gal/min
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
177 mm × 1760 mm (0.58 ft × 5.8 ft)
-
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
267 mm × 286 mm (0.88 ft × 0.94 ft)
-
-
Service Refill Capacities
Fuel Tank - Standard
413 gal (US)
-
-
Cooling System
53 gal (US)
-
-
Crankcase
32 gal (US)
-
-
Transmission
45 gal (US)
-
-
Differential - Final Drives - Front
98 gal (US)
-
-
Differential - Final Drives - Rear
90 gal (US)
-
-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
77 gal (US)
-
-
Note (1)
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo
-
-
Fuel Tank
-
90 gal (US)
-
DEF Tank
-
7.4 gal (US)
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Brakes
Brakes
Meets ISO 3540:2011
-
-
Blades
Blade Capacities
30.5 to 44.8 m3 (40 to 58.6 yd3)
-
-
Dimensions (Approximate)
Height - Top of ROPS
18.25 ft
-
-
Height - Top of Exhaust Pipe
17.17 ft
-
-
Height - Top of Hood
13 ft
-
-
Ground Clearance
27 in
-
-
Centerline of Front Axle to Hitch
9.67 ft
-
-
Centerline of Rear Axle to Edge of Bumper
13.75 ft
-
-
Wheel Base
19.25 ft
-
-
Length - With Blade on Ground
44 ft
-
-
Hydraulic System - Steering
Steering System - Pump
Piston, variable displacement
-
-
Minimum Turning Radius - Over Blade
31 ft
-
-
Steering System - Circuit
Pilot, load sensing
-
-
Total Steering Angle
86 degrees
-
-
Relief Valve Setting
5004 psi
-
-
Operating Specifications
Operating Weight
224647 lb
-
-
Sound Performance Levels
Sound Performance
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
-
Cab
ROPS/FOPS
ISO 3471:2008 and ISO 3449:2005 Level II Standards
