Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
814 HP
-
-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
907 HP
-
-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
823 HP
-
-
Rated Speed
1750 r/min
-
-
Bore
5.7 in
-
-
Stroke
6.4 in
-
-
Displacement
1958 in²
-
-
Peak Torque - 1,200 rpm
3139 lb/ft
-
-
Torque Rise
30 %
-
-
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Note (2)
Net torque rise meets SAE J139.
-
-
Note (3)
No engine derating required up to 3050 m (10,000 ft) altitude.
-
-
Weights
Operating Weight
224647 lb
-
-
Transmission
Transmission Type
Cat Planetary Power Shift
-
-
Converter Drive - Forward 1
4.4 mile/h
-
-
Converter Drive - Forward 2
7.7 mile/h
-
-
Converter Drive - Forward 3
13.2 mile/h
-
-
Converter Drive - Reverse 1
4.8 mile/h
-
-
Converter Drive - Reverse 2
8.4 mile/h
-
-
Converter Drive - Reverse 3
14.6 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8.1 mile/h
-
-
Direct Drive - Forward 3
14.2 mile/h
-
-
Direct Drive - Reverse 1
5 mile/h
-
-
Direct Drive - Reverse 2
8.9 mile/h
-
-
Direct Drive - Reverse 3
15.6 mile/h
-
-
Note
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
161 gal/min
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
177 mm × 1760 mm (0.58 ft × 5.8 ft)
-
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
267 mm × 286 mm (0.88 ft × 0.94 ft)
-
-
Service Refill Capacities
Fuel Tank - Standard
413 gal (US)
-
-
Cooling System
53 gal (US)
-
-
Crankcase
32 gal (US)
-
-
Transmission
45 gal (US)
-
-
Differential - Final Drives - Front
98 gal (US)
-
-
Differential - Final Drives - Rear
90 gal (US)
-
-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
77 gal (US)
-
-
Note (1)
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo
-
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Brakes
Brakes
Meets ISO 3540:2011
-
-
Blades
Blade Capacities
30.5 to 44.8 m3 (40 to 58.6 yd3)
-
-
Dimensions (Approximate)
Height - Top of ROPS
18.25 ft
-
-
Height - Top of Exhaust Pipe
17.17 ft
-
-
Height - Top of Hood
13 ft
-
-
Ground Clearance
27 in
-
-
Centerline of Front Axle to Hitch
9.67 ft
-
-
Centerline of Rear Axle to Edge of Bumper
13.75 ft
-
-
Wheel Base
19.25 ft
-
-
Length - With Blade on Ground
44 ft
-
-
Hydraulic System - Steering
Steering System - Pump
Piston, variable displacement
-
-
Minimum Turning Radius - Over Blade
31 ft
-
-
Steering System - Circuit
Pilot, load sensing
-
-
Total Steering Angle
86 degrees
-
-
Relief Valve Setting
5004 psi
-
-
Operating Specifications
Operating Weight
224647 lb
-
-
Sound Performance Levels
Sound Performance
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes.
-
-
Cab
ROPS/FOPS
ISO 3471:2008 and ISO 3449:2005 Level II Standards
