Compare

Compare Equipment Go Back

Operating Specifications
	988 GC Wheel Loader View Product	992 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	995 Wheel Loader View Product Remove
Operating Weight	112426 lb	233430 lb	-	-
Bucket Capacity Range	6.4-7.6 m3 (8.3-10 yd3)	11.5-24.5 m³ (15-32 yd³)	-	17.2-43.6 m3 (22.3-57 yd3)
Rated Payload - Quarry Face	12.5 ton (US)	-	-	-
Cat Truck Match - High Lift	772/773/775	785	-	789/793/794
Rated Payload - Standard	-	25.5 ton (US)	-	-
Rated Payload - Standard (Material Handler)	-	30 ton (US)	-	-
Rated Payload - High Lift	-	22.5 ton (US)	-	-
Rated Payload - High Lift (Material Handler)	-	27 ton (US)	-	-
Cat Truck Match - Standard	-	775/777	-	785/789
Operating Weight - Standard	-	-	-	543772 lb
Operating Weight - High Lift	-	-	-	547675 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	-	60 ton (US)
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	-	55 ton (US)
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)
Note	-	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
Engine
Engine Model	Cat® C15	Cat® C32B	Cat C3.6	Cat® 3516E
Rated Speed	2000 rpm	1750 rpm	-	-
Peak Power Speed	1600 rpm	-	-	-
Gross Power - SAE J1995:2014	456 hp	-	-	1870 hp
Net Power - SAE J1349:2011	448 hp	-	-	-
Bore	5.4 in	5.7 in	3.85 in	6.7 in
Stroke	6.75 in	6.4 in	4.72 in	8.5 in
Displacement	927 in³	1963.5 in³	220 in³	4766 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lbf·ft	-	-	-
Torque Rise	16%	-	-	39%
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-	The power ratings apply when tested under the reference conditions for the specified standard.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
Note (3)	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.	-	-	The gross power advertised is with the fan at maximum speed.
Net Power	-	814 hp	-	-
Emissions	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	900 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	937 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	907 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	944 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	884 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	921 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	893 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	931 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	814 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	814 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	823 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	823 hp	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	3514 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	3555 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	3537 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	3570 ft·lbf	-	-
Maximum Gross Power	-	-	121 hp	-
Rated Net Power - Rated Engine Speed	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	-	2200 r/min	-
Rated Net Power - SAE J1349	-	-	120 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	-	122 hp	-
Rated Net Power - ISO 9249	-	-	118 hp	-
Maximum Gross Torque - SAE J1995	-	-	372 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	-	369 ft·lbf	-
Maximum Net Torque - SAE J1349	-	-	366 ft·lbf	-
Maximum Net Torque - ISO 9249	-	-	363 ft·lbf	-
Note	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Maximum Gross Power - ISO 14396	-	-	121 hp	-
Engine Power - ISO 14396	-	-	-	1847 hp
Net Power - SAE J1349 - Standard Ambient	-	-	-	1739 hp
Net Power - SAE J1349 - High Ambient	-	-	-	1696 hp
Peak Torque - 1,200 rpm - SAE J1995	-	-	-	8549 lb/ft
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Powershift	-	Cat Planetary Power Shift
Forward - 1	5 mile/h	4.3 mile/h	-	4.6 mile/h
Forward - 2	8 mile/h	7.4 mile/h	-	8 mile/h
Reverse - 1	5 mile/h	4.7 mile/h	-	5 mile/h
Reverse - 2	8 mile/h	8.1 mile/h	-	8.8 mile/h
Direct Drive - Forward 1	Lock-up disabled	Disabled	-	Lock-up disables
Direct Drive - Forward 2	8 mile/h	8 mile/h	-	8.7 mile/h
Direct Drive - Forward 3	14 mile/h	14 mile/h	-	15.2 mile/h
Direct Drive - Forward 4	24 mile/h	-	-	-
Direct Drive - Reverse 1	Lock-up disabled	5 mile/h	-	Lock-up disables
Direct Drive - Reverse 2	9 mile/h	8.8 mile/h	-	9.6 mile/h
Direct Drive - Reverse 3	16 mile/h	15.3 mile/h	-	16.8 mile/h
Direct Drive - Reverse 4	25.4 mile/h	-	-	-
Note	Travel speeds based on 35/65-R33 tires.	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Travel speeds based on 58/85-57 tires.
Forward - 3	-	12.7 mile/h	-	13.6 mile/h
Reverse - 3	-	13.9 mile/h	-	14.9 mile/h
Forward and Reverse - Speed Range 3	-	-	25 mile/h	-
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h	-
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH - Load Sense	Positive Flow Control	-	Positive Flow Control
Lift/Tilt System - Pump	Variable displacement piston	Variable Displacement Piston	-	Variable Displacement Piston
Maximum Flow at 2,165 rpm	159 gpm	250 gpm	-	-
Relief Valve Setting - Lift/Tilt	4598 psi	5000 psi	-	5004 psi
Cylinders, Double Acting - Lift, Bore and Stroke	190 mm x 1216 mm (7.5 in x 48 in)	-	-	370 × 1713 mm (14.6 × 67.4 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	170 mm x 722 mm (6.7 in x 28.4 in)	-	-	310 × 1086 mm (12.2 × 42.8 in)
Pilot System	Variable displacement piston	-	-	Open Loop and Pressure Reducing
Relief Valve Setting	500 psi	-	-	-
Lift Cylinder - Bore	-	9.3 in	-	-
Lift Cylinder - Stroke	-	63.5 in	-	-
Tilt Cylinder - Bore	-	11.5 in	-	-
Tilt Cylinder - Stroke	-	41.5 in	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	-	-	541 gpm
Hydraulic Cycle Times
Rack Back	3.8 s	2.3 s	-	4.9 s
Raise	7.5 s	9 s	-	12.6 s
Dump	3 s	2.6 s	-	3.1 s
Lower Float Down	4.6 s	-	-	4.2 s
Total Hydraulic Cycle Time - Empty Bucket	18.9 s	-	-	-
Rack Back - High Lift	-	2.3 s	-	-
Raise - High Lift	-	9 s	-	-
Dump - High Lift	-	2.6 s	-	-
Float Down	-	3.2 s	-	-
Float Down - High Lift	-	3.2 s	-	-
Total Hydraulic Cycle Time	-	17.1 s	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	-	Pilot, Load Sensing
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	-	Piston, Variable Displacement
Maximum Flow at 2,165 rpm	52 gpm	-	-	-
Relief Valve Setting - Steering	4000 psi	-	-	-
Total Steering Angle	70°	80°	-	80 degrees
Steering Cycle Times - High Idle	3 s	3.1 s	-	4.3 s
Steering Cycle Times - Low Idle	5.2 s	4.9 s	-	7.6 s
Maximum Flow at 1,400-1,850 rpm	-	70 gpm	-	-
Steering Cut Off Pressure	-	4500 psi	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	-	-
Axles
Front	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion
Oscillation Angle	+/-12.5°	±9°	-	9°
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Service Refill Capacities
Fuel Tank	141 gal (US)	385.7 gal (US)	43.6 gal (US)	-
Cooling System	27 gal (US)	-	5.7 gal (US)	-
Engine Crankcase	9 gal (US)	-	2.6 gal (US)	-
Diesel Exhaust Fluid Tank	5.5 gal (US)	-	-	-
Transmission	20 gal (US)	51.5 gal (US)	0.8 gal (US)	-
Differential - Final Drives - Front	49 gal (US)	96.4 gal (US)	-	-
Differential - Final Drives - Rear	45 gal (US)	96.4 gal (US)	-	-
Hydraulic System Factory Fill	94 gal (US)	-	-	-
Note	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-
Cooling Systems	-	59.4 gal (US)	-	-
Crankcase	-	31.7 gal (US)	-	-
Hydraulic System Factory Fill (Implement)	-	104.1 gal (US)	-	-
Hydraulic Tank - Implement	-	60.2 gal (US)	-	-
Hydraulic Factory Fill (Steering)	-	32.5 gal (US)	-	-
Hydraulic Tank (Steering Tank Only)	-	26.3 gal (US)	-	-
Axles - Rear	-	-	4.5 gal (US)	-
Hydraulic System - Including Tank	-	-	25.9 gal (US)	-
Hydraulic Tank	-	-	14.5 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)	-
Axles - Front	-	-	4.5 gal (US)	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.5 ft	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-
Ground to Fuel Tank Clearance	2.2 ft	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-
Front Axle Centerline to Bucket Tip	16.7 ft	-	-	-
Wheel Base	12.5 ft	-	-	-
Maximum Overall Length	39.5 ft	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-
Clearance at Maximum Lift (45° Dump)	12 ft	-	-	-
B-Pin Height - Maximum Lift	18.7 ft	-	-	-
Maximum Overall Height - Bucket Raised	25 ft	-	-	-
Reach at Maximum Lift (45° Dump)	7.7 ft	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-	-	-
Buckets
Bucket Capacities	-	11.5-24.5 m³ (15-32 yd³)	1.3-3.5 m3 (1.7-4.6 yd3)	-
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	109.4 °F
Ambient Capability, Hydraulically Driven Demand Fan - High	-	131 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	-	131 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	-	127.4 °F
Sound Performance - Standard
Note	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	74 dB(A)
Machine Sound Level (ISO 6395:2008)	-	-	-	119 dB(A)
Sound Performance - Suppression
Note	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	73 dB(A)
Machine Sound Level (ISO 6395:2008)	-	-	-	117 dB(A)
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	17 ft	-	23.2 ft
Ground to Top of ROPS	-	18.3 ft	-	23.4 ft
Ground to Top of Hood	-	13.1 ft	-	18.6 ft
Ground to Center of Front Axle	-	4.3 ft	-	-
Ground to Bumper Clearance	-	3.8 ft	-	4.4 ft
Ground to Lower Hitch Clearance	-	2.2 ft	-	2.9 ft
Reach - Maximum Lift	-	8.2 ft	-	9.6 ft
Clearance at Maximum Lift	-	15.2 ft	-	19.8 ft
B-Pin Height - Maximum Lift	-	22.8 ft	-	28.8 ft
Maximum Overall Height - Bucket Raised	-	30.8 ft	-	39.3 ft
Rear Axle - Centerline to Bumper	-	13.5 ft	-	20.4 ft
Tread Width	-	10.83 ft	-	14.1 ft
Rack Back Angle - Maximum Lift	-	56.9 degrees	-	-
Dump Angle at Maximum Lift	-	-49.5 degrees	-	–50.0 degrees
Rack Back Angle - Ground Level	-	40.2 degrees	-	39.7 degrees
Width - Over Tires - With Bulge	-	14.74 ft	-	18.8 ft
Rack Back Angle - Carry	-	48.9 degrees	-	47.7 degrees
Wheel Base	-	19.3 ft	-	22.3 ft
Maximum Overall Length	-	50.8 ft	-	64.6 ft
Front Axle Centerline to Bucket Tip	-	18 ft	-	21.9 ft
Ground to Center of Axles	-	-	-	6 ft
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift	-	-	-	59.5 degrees
Dimensions - High Lift - Approximate
Tread Width	-	10.83 ft	-	14.1 ft
Rack Back Angle - Ground Level	-	42.5 degrees	-	45 degrees
Dump Angle at Maximum Lift	-	-48.1 degrees	-	–50.0 degrees
Rack Back Angle - Maximum Lift	-	56.2 degrees	-	-
Width - Over Tires - With Bulge	-	14.75 ft	-	18.8 ft
Rack Back Angle - Carry	-	51.6 degrees	-	53.5 degrees
Ground to Top of Exhaust Stacks	-	17 ft	-	23.2 ft
Ground to Top of ROPS	-	18.3 ft	-	23.4 ft
Ground to Top of Hood	-	13.1 ft	-	18.6 ft
Ground to Center of Front Axle	-	4.3 ft	-	-
Ground to Bumper Clearance	-	3.8 ft	-	4.4 ft
Ground to Lower Hitch Clearance	-	2.2 ft	-	2.9 ft
Reach - Maximum Lift	-	7.6 ft	-	9.4 ft
Clearance at Maximum Lift	-	17.2 ft	-	22.6 ft
B-Pin Height - Maximum Lift	-	24.5 ft	-	31.6 ft
Maximum Overall Height - Bucket Raised	-	32 ft	-	42.1 ft
Rear Axle - Centerline to Bumper	-	13.5 ft	-	20.4 ft
Wheel Base	-	19.3 ft	-	22.3 ft
Maximum Overall Length	-	51.6 ft	-	66.9 ft
Front Axle Centerline to Bucket Tip	-	18.8 ft	-	24.2 ft
Ground to Center of Axles	-	-	-	6 ft
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift	-	-	-	59.4 degrees
Weights
Operating Weight	-	-	21742 lb	-
Sustainability
Recyclability	-	-	95%	-
Cab
ROPS	-	-	ISO 3471:2008	-
FOPS	-	-	ISO 3449:2005	-
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	43.6 gpm	-
Relief Pressure - Tilt Cylinder	-	-	4641 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	25 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	4641 psi	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	2.7 s	-
Note	-	-	All cycle times listed are with cylinder snubbing turned off.	-
Maximum Working Pressure - Implement Pump	-	-	4061 psi	-
Hydraulic Cycle Time - Total Cycle Time	-	-	11.5 s	-
Hydraulic Cycle Time - Rackback	-	-	2.2 s	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.8 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	4.8 s	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	40 gpm	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	25 gpm	-
Steering
Maximum Working Pressure - Steering Pump	-	-	3190 psi	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	2.3 s	-
Steering Articulation Angle - Each Direction	-	-	40 °	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.4 turns	-
Maximum Flow - Steering Pump	-	-	21.7 gpm	-
Tires
Other Choices Include	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-
Standard Size	-	-	17.5 R25 L2 XTLA	-
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Complete System Fill
Fuel Tank - Standard	-	-	-	856 gal (US)
Fuel Tank - With 24 hr Attachment	-	-	-	1414 gal (US)
Cooling System	-	-	-	138 gal (US)
Engine Crankcase	-	-	-	76 gal (US)
Transmission	-	-	-	110 gal (US)
Differential - Final Drives - Front	-	-	-	220 gal (US)
Differential - Final Drives - Rear	-	-	-	200 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	270 gal (US)
Hydraulic Tank - Steering and Braking	-	-	-	100 gal (US)
Oil Renewal System (ORS)*	-	-	-	20 gal (US)
Note	-	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.

Compare Equipment Go Back

988 GC Wheel Loader

992 Wheel Loader

920 Compact Wheel Loader

995 Wheel Loader

Operating Specifications

Engine

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - High Lift

Buckets

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Complete System Fill

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us