CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 GC Wheel Loader
    View Product
    982
    View Product Remove
    988 XE Wheel Loader
    View Product Remove

    Engine
    Engine Model Cat® C15 Cat C13 Cat® C18 ™
    Rated Speed 2000 - 1,700 rpm
    Peak Power Speed 1600 - 1,500 rpm
    Engine Power - ISO 14396 449 HP - -
    Gross Power - SAE J1995 456 HP - -
    Net Power - SAE J1349 373 HP - 538 HP
    Emissions U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Bore 5.4 in - 5.7 in
    Stroke 6.75 in - 7.2 in
    Displacement 927 in³ - 1105 in³
    Peak Torque - 1,200 rpm - SAE J1995 1778 ft·lbf - 2230 ft·lbf
    Torque Rise 16% - 58%
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 404 HP -
    Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. -
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. -
    Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1636 lb/ft -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1620 lb/ft -
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1515 lb/ft -
    Engine Power @ 1,700 rpm – ISO 14396:2002 - 432 HP -
    Gross Power @ 1,700 rpm – SAE J1995:2014 - 436 HP -
    Engine Power - ISO 14396:2002 - - 580 HP
    Gross Power - SAE J1995:2014 - - 588 HP

    Operating Specifications
    Operating Weight 116858 lb - 116362 lb
    Rated Payload - Quarry Face 12.5 ton (US) - -
    Bucket Capacity Range 6.4-7.6 m3 (8.3-10 yd3) - 4.7-13 m3 (6.2-17 yd3)
    Cat Truck Match - High Lift 772/773/775 - -
    Breakout Force - 59060 lbf -
    Note (1) - For a machine configuration as defined under �Weight.� -
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. -
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 22418 kg -
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 46526 lb -
    Operating Weight - Standard - - 116362 lb
    Operating Weight - High Lift - - 119618 lb
    Rated Payload - Standard (Quarry Face) - - 12.5 ton (US)
    Rated Payload - Loose Material (Standard) - - 16 ton (US)

    Transmission
    Transmission Type Cat planetary power shift - Cat switched reluctance electric drive
    Forward - 1 5 mile/h 3.9 mile/h -
    Forward - 2 8 mile/h 7.4 mile/h -
    Reverse - 1 5 mile/h 4.3 mile/h -
    Reverse - 2 8 mile/h 8.5 mile/h -
    Direct Drive - Forward 1 Lock-up disabled - -
    Direct Drive - Forward 2 8 mile/h - -
    Direct Drive - Forward 3 14 mile/h - -
    Direct Drive - Forward 4 24 mile/h - -
    Direct Drive - Reverse 1 Lock-up disabled - -
    Direct Drive - Reverse 2 9 mile/h - -
    Direct Drive - Reverse 3 16 mile/h - -
    Direct Drive - Reverse 4 25.4 mile/h - -
    Forward - 3 - 13.1 mile/h -
    Forward - 4 - 23.3 mile/h -
    Note - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. -
    Reverse - 3 - 15 mile/h -
    Reverse - 4 - 24.5 mile/h -
    Forward 1 (virtual) - - 4.3 mile/h
    Forward 2 (virtual) - - 7 mile/h
    Forward 3 (virtual) - - 13.8 mile/h
    Forward 4 (virtual) - - 20 mile/h
    Reverse 1 (virtual) - - 4.3 mile/h
    Reverse 2 (virtual) - - 7 mile/h
    Reverse 3 (virtual) - - 17.5 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH - Load Sense - EH-Positive Flow Control, Flow Sharing
    Lift/Tilt System 2X x 145 cc Variable displacement piston - -
    Maximum Flow at 2,165 rpm 159 gal/min - -
    Relief Valve Setting - Lift/Tilt 4598 psi - 4757 psi
    Cylinders, Double Acting - Lift, Bore and Stroke 190 mm x 1216 mm (7.5 in x 48 in) - -
    Cylinders, Double Acting - Tilt, Bore and Stroke 170 mm x 722 mm (6.7 in x 28.4 in) - -
    Pilot System Variable displacement piston - -
    Tilt Cylinder - Stroke 27 in - 27 in
    Lift/Tilt System - Pump - - Variable displacement piston
    Maximum Flow at 1,400-1,600 rpm - - 153 gal/min
    Lift Cylinder - Bore - - 8.7 in
    Lift Cylinder - Stroke - - 41.3 in
    Tilt Cylinder - Bore - - 8.7 in

    Hydraulic Cycle Times
    Rack Back 3.8 s - 4.5 s
    Raise 7.5 s - 8 s
    Dump 3 s - 2.2 s
    Lower Float Down 4.6 s - 3.5 s
    Total Hydraulic Cycle Time - Empty Bucket 18.9 s - -
    Total Hydraulic Cycle Time - - 18.2 s

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - Pilot, load sensing
    Steering System - Pump Piston, variable displacement - Piston, variable displacement
    Maximum Flow 52 gal (US) - -
    Relief Valve Setting - Steering 4000 psi - -
    Total Steering Angle 70° - 86°
    Steering Cycle Times - High Idle 3 s - 3.4 s
    Steering Cycle Times - Low Idle 5.2 s - 5.6 s
    Maximum Flow at 1,400-1,600 rpm - - 71.3 gal/min
    Steering Cut Off Pressure - - 4351 psi

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Axles
    Front Fixed - Fixed
    Rear Trunnion - Trunnion
    Oscillation Angle +/-12.5° - 13°

    Brakes
    Brakes ISO 3450:2011 - ISO 3450:2011

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Service Refill Capacities
    Fuel Tank 141 gal (US) 112.5 gal (US) 147 gal (US)
    Cooling System 27 gal (US) 13.7 gal (US) -
    Engine Crankcase 9 gal (US) - 16 gal (US)
    Diesel Exhaust Fluid Tank 5.5 gal (US) - 8.7 gal (US)
    Transmission 20 gal (US) 20.3 gal (US) 16 gal (US)
    Differential - Final Drives - Front 49 gal (US) 24.3 gal (US) 49 gal (US)
    Differential - Final Drives - Rear 45 gal (US) 24.3 gal (US) 49 gal (US)
    Note Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
    Crankcase - 9.8 gal (US) -
    DEF Tank - 5.5 gal (US) -
    Hydraulic Tank - 40.4 gal (US) -
    Cooling System - Jacket Water - - 30 gal (US)
    Cooling Systems - Power Train - - 8 gal (US)
    Hydraulic System - Implement/Steering - - 126 gal (US)

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 72 dB(A) - -
    Machine Sound Level (ISO 6395) 110 dB(A) - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS 13.5 ft - 13.8 ft
    Ground to Top of Exhaust Stacks 13.3 ft - 14.8 ft
    Ground to Top of Hood 10.7 ft - 10.9 ft
    Rear Axle - Centerline to Bumper 10.3 ft - 10.5 ft
    Front Axle Centerline to Bucket Tip 15.7 ft - 15.3 ft
    Wheel Base 12.5 ft - 14.9 ft
    Maximum Overall Length 39.5 ft - 40.7 ft
    Ground to Lower Hitch Clearance 1.5 ft - 1.9 ft
    Clearance at Maximum Lift 12 ft - 13.3 ft
    B-Pin Height - Maximum Lift 18.7 ft - 19.3 ft
    Maximum Overall Height - Bucket Raised 25 ft - 25.8 ft
    Reach - Maximum Lift 7.7 ft - 6.8 ft
    Note Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
    Ground to Bumper Clearance - - 3.1 ft
    Ground to Center of Axles - - 3.2 ft

    Buckets
    Bucket Capacities 6.4-7.6 m3 (8.3-10 yd3) - 4.7-13 m3 (6.2-17 yd3)

    Sustainability
    Recyclability 96% - 96%

    Weights
    Operating Weight - 78264 lb -
    Note - Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun -

    Bucket Capacities
    Bucket Range - 4.8-17.2 m³ 6.25-22.5 yd³ -

    Sound
    Note (1) - ** For machines in European Union countries and in countries that adopt the �EU Directives.� -
    Note (2) - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 109 -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 112 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 78 -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4975 psi -
    Implement System - Maximum Pump Output at 2,250 rpm - 119 gal/min -

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 9.4 ft -
    Centerline of Rear Axle to Hitch - 6.3 ft -
    Ground Clearance - 1.4 ft -
    Height - Top of Exhaust Pipe - 12.4 ft -
    Height - Top of Hood - 10 ft -
    Height - Top of ROPS - 12.6 ft -
    Hinge Pin Height at Carry - 2.11 ft -
    Hinge Pin Height at Maximum Lift - 16.1 ft -
    Lift Arm Clearance at Maximum Lift - 13.4 ft -
    Overall Length - Without Bucket - 29.11 ft -
    Tread Width - 8.4 ft -
    Wheel Base - 12.6 ft -
    Width over Tires (Loaded) - 11.5 ft -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.9 ft -
    Centerline of Rear Axle to Hitch - 6.3 ft -
    Ground Clearance - 428 mm -
    Height - Top of Exhaust Pipe - 3736 mm -
    Height - Top of Hood - 3036 mm -
    Height - Top of ROPS - 3801 mm -
    Hinge Pin Height at Carry - 2.7 ft -
    Hinge Pin Height at Maximum Lift - 4741 mm -
    Lift Arm Clearance at Maximum Lift - 3902 mm -
    Overall Length - Without Bucket - 8597 mm -
    Tread Width - 8.4 ft -
    Wheel Base - 3800 mm -
    Width over Tires (Loaded) - 11.5 ft -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 109 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 110 dB(A)

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 14.8 ft
    Ground to Top of Hood - - 10.9 ft
    Ground to Bumper Clearance - - 3.1 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - 14 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 39.3 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Ground to Center of Axles - - 3.2 ft
    Clearance at Maximum Lift - - 11.9 ft
    B-Pin Height - Maximum Lift - - 18 ft
    Maximum Overall Height - Bucket Raised - - 24.5 ft
    Reach - Maximum Lift - - 6.5 ft
    Note - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 13.8 ft
    Ground to Top of Hood - - 10.9 ft
    Ground to Bumper Clearance - - 3.1 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Fork Tip - - 16.5 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 41.9 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Ground to Center of Front Axle - - 3.2 ft
    Fork Height with Level Arms - - 8.1 ft
    Fork Top Clamp Opening - - 13.1 ft
    Fork Height at Maximum Lift - - 17.2 ft
    Hinge Pin Height at Maximum Lift - - 16.1 ft
    Dump Angle at Maximum Lift - - -39.4 °
    Add a Similar Product: